Loading…
Loading…
Tender ID
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹16.9 Laccepted-aoc | accepted-aoc |
Tender Value
₹19.9 L
EMD Value
₹50,000
Closing Date
2 Mar 2026, 9:30 pmClosed
Directorate of Municipal Administration
VIJAYAKUMAR R
Regarding construction of samuday bhavana in padadayyan hakkal at ward no.71 huballi.
DMA/2025-26/BD/WORK_INDENT53789
DMA/2025-26/BD/WORK_INDENT53789
Open
Buildings
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
8 documents required · 8 mandatory
₹500
₹50,000
2 Mar 2026
19 Feb 2026
28 Feb 2026
Regarding construction of samuday bhavana in padadayyan hakkal at ward no.71 huballi.
Earth work excavation for Foundation by mechanical means for allworks & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution ligh...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,incl...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and laying flamed finish Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 1...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer aftertho...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade afterthoroughly brooming the surface to remove all dirt, dust, m...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Super structures ofbuilding , Road works, Water works, Irrigation works & super structure worksof bridges upto 3.50 m height. The granite/trap/...
Additionalities for Formwork, Centering & Scaffolding foundation Foundation upto Plinth b. All other types 3% percentage to be added to the finished rate of concrete
Additionalities for Formwork, Centering & Scaffolding Columns Super structrue 70% percentage to be added to the finished rate of concrete
Additionalities for Formwork, Centering & Scaffolding lintel beam and beam of Buildings structrue 60% percentage to be added to the finished rate of concrete
Additionalities for Formwork, Centering & Scaffolding Roof slab Stair case and Other similar Structure of Buildings structrue 50% percentage to be added to the finished rate of concrete
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding20cm in depth, consolidating each deposited layer by ram...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm,with 40 mm...
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frameand diagonal braces of 40x40x6 mm angle iron, 3 mm M.S.gusset plates at the junctions and corners, 25 mm dia pulley,40x40x6 mm an...
Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to opening...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm diamild steel bars at 20 cms. c to c both horizontally and vertically fixed withchicken mesh for drop chajja,facia, backing to cup bo...
Providing and fixing hand rail of approved size by welding etc. to steelladder railing, balcony railing, staircase railing and similar works,including applying priming coat of approved steel primer. G...
Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping casing capping using 2x1.5mm2
(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi
strand PVC insulated copper wire (...
Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping casing capping using 2x1.5mm2
(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi
strand PVC insulated copper wire (...
2.3) Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifi...
2.3) Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifi...
1.9) SupplyingPVCflexibleconduitpipe.mmdiafixingonsurfaceoverinvertedtaperedwoodenplugsorphillplugsorrawlplugsandclampedusingheavygaugesaddlesatanintervalof300mmusigNFscrews and on either end of the p...
Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board.
6A Batten Holder
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with
required nos. of machine screws, bolts nuts etc., complete on
the existing m...
Supplying and fixing of modular switch & connected accessories
on existing modular switch plate as per IS 3854 and IS 1293.
3.6.1)6A One Way Switch
Supplying and fixing of modular switch & connected accessories
on existing modular switch plate as per IS 3854 and IS 1293
3.6.3) 6A Three Way socket
Supplying capacitor type ceiling fan complete with down rod
blades, shackle, canopies etc, for operation on 230 V, 50 cycles.
Single phase AC supply conforming to ISS-374- 1979 and with
double ball be...
Electronic stepped regulator.
Fixing all types and all capacities of fluorescent /false ceiling /
spot light / CFL / LED fittings indoor on the wall/ ceiling /
rafters / girders using 23/0.0076" twin twisted PVC insulated
Supplying & fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and 'C' Type curve, indicator ON/OFF, energy cross-3 with
Short circuit breaking capa...
Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. PowerInput: 220-240V 50/60Hz Power factor 0.9 alo...
389 51.01GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg Schedule of Rate for Standard Stock Material...
Good Quality well burnt Charcoal for grounding
purposes packed in non returnable gunny bag of 30 Kg
each Schedule of Rate for Standard Stock Materials in Common SR 2023-24 (11 kV System)
Good Quality Salt for grounding purposes packed in 50
Kg gunny bag Schedule of Rate for Standard Stock Materials in Common SR 2023-24 (11 kV System)
Rod type of earthing using 40 mm Dia, 3 Mtr long MS
rod as ground rod, in earth pit of 300 mm width and
3300 mm depth and using 50x6 mm flat welded to
ground rod as terminal &...
393 )51.05 )Bentonite clay slurry for earthing in 50 Kg Bag Schedule of Rate for Standard Stock Materials in Common SR 2023-24 (11 kV System)
1.6) Digging of Pit for providing GI Pipe type Earthing 21 ) 1.6.1) Ordinary Soil abour Charges in Common SR 2023-24 (11 kV System)
32) 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 198)...
Laying of cable in Existing Trench/GI pipe/Stoneware/RCC Hume pipe using wooden/Aluminium Rollers as directed by department staff. 2.5 to 25Sqmm. ESCOMs SR 2023-24 Page No 388 Item No 21.05
Fuses Supplying & fixing of Porcelain fuse channel with cut out onexisting wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32Amps PWD SR 2023-24 Item code5.7.2
Digging Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then efilling the Cable Trenches.29.10) Tar Road
HDPEPLB Pipe 40/33 mm ESCOMs SR 2023-24 Page No 366 Item No 66.05
1.6)Supplyingandflushmountingteakwoodenboxwithoutfrontplank,madeofnotlessthan12mmthickwood,afterduegroovecutting,finishing with necessary cement plastering complete.
Pothead Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm ESCOMs SR 2023-24 Page No 351 Item No 35.01
Supplying and flush mounting powder coated / galvanizedmetal box suitable for mounting modular switch plates. Thebox should be firmly flush mounted after due groove cuttingin Brick/Stone/C.C wall3.4.2...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
format of bankers certifiate.pdf
Instructions to Tenderers • 0.37 MB
kw-1 53789.doc
Tender Document • 1.01 MB
government notification.pdf
Instructions to Tenderers • 1.75 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .