SPL REPAIR TO ENT OPD AUDIOMETRY ROOM REPLACEMENT OF EXISTING WOODEN PANEL WITH SOUND PROOFING PANEL OF MH AT BAIRAGARH AND PROVN OF TOILET BLOCK FOR CANDIDATES NEAR BLDG NO P 318 GATE NO 02 OF SCC AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline.

M&L for Woodlot FR Grades of size 2430x131x16mm made of exterior grade HDF backed with acoustical having excellent noise absorption 0.88 NRC as per ISO 354. 15mm Aluminum profile conforms to Aluminum Alloy 6063-T 6.Temper as per BS: 1474-1987 and G.I Lock in clips on the back of tongue and Groove system. Density per panel is 750-800 kg/m3. The panels come with tongue & groove for seamless patterns, 4-28mm Groove and visible panel. The perpendicular holes are available on the back of panel which are covered by black acoustical fleece. Installed on G.I studs 600x600mm center to center 2400mm x 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent result including dismantling existing wall panneling complete all as specified and directed. Make: Himalayan Accoustic/ Armacell India or equivalent as approved by GE.

M&L for cortex tile made up of 'Wood fiber cement composite' 1mm width wood fiber 25mm thick covered with acoustically transparent woven fabric on the front side, with an option of colors of size 600x1200 mm having excellent noise absorption of 1 NRC (for the base panel) as per ISO: 354 fire ratings as per BS 476 Part 5, 6 and 7 class 1 and P, water resistant and thermal insulated installed with PVC H profile on G.I. studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120 GSM zinc coating with a backing of 50mm, 1000 GSM thick absorb wool tested as per fire retardant IS:15061-2002 for excellent results complete all as specified and directed. Make:- Himalayan Accoustic/ Armacell India or equivalent as approved by GE.

M&L for fibrette tile made of 'Wood fiber Cement Composite' 1mm width wood fiber 15mm thick size 595x595/ 595x1195 mm having excellent noise absorption of 1 NRC as per ISO: 354, density 400 Kg/m3, meets fire ratings as per BS 476 Part 5, 6 and 7 class 1 and P, water resistant and thermal insulated. Installed on T24 grid system of 0.6mm thick main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, wire support for main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per fire retardant IS: 15061-2002 for excellent results including dismantling existing wall panneling complete all as specified and directed. Make:- Himalayan Accoustic/ Armacell India or equivalent as approved by GE.

M&L for floor of 8mm thick under lay of neoprene rubber sheet over which 5mm thick loop pile carpet, the material attenuate the low frequency waves 125 to 4 Khz and less interference from low frequency sound. Make: Himalayan Accoustic/ Armacell India or equivalent as approved by GE.

S&F of Acoustic door of 56mm achieving sound reduction of upto 50 STC double layers of 8mm water proof acoustic ply with dampner sheet and double layer of 10mm compressed insulation and single layer of sound dampner 1218 x1218x12mm made of 10 mm compressed wood fiber cement composites 1250 Kg/m3 and 2mm dampner sheet having 37 STC as per ISO 140 (part-III - 1995), door frame will be made of teak wood (Sudan Teak), three side frame and drop seal below will be provided along with the door with high load bearing hinges including dismantling existing one complete all as specified and directed. Make: Himalayan Accoustic/ Armacell India or equivalent as approved by GE.

M&L for observation window comprising of double layers 8mm thick glass with the inside glass being placed at an angle of 45 degrees, if desired and secured to a wooden frame work with rubber gaskets and silica gel including dismantling of existing aluminium window complete all as specified and directed.

M&L for ISO block 666x500x100mm, weight 31 Kg per panel of density 950 Kg/m3 made of compressed gypsum composites with tongue and groove. System fixed with fast drying jointing compound. Achieves sound reduction of upto 46.75 STC tested as per ASTMD E-90.The wall can also be finished with POP finish after the installation complete all as specified and directed. Make: Himalayan Accoustic/ Armacell India or equivalent as approved by GE.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster or any description complete all as specified and directed.

M&L for surface excavation not exc 30 cm deep and averaging 15cm deep and getting out Hard/dense soil complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation and sub base etc complete all as specified and directed.

M&L for moorum/red bajri filling in floors or paving, laid in layers n exc 15 cm thick, spread, levelled and blinded with earth and rammed including watering complete all as specified and directed.

M&L for hard core broken stone or boulders of gauge n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick wateed and rammed to a true surface complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using modular bricks complete all as specified and directed

M&L for brick work with fly ash bricks in CM 1:4 using modular bricks straight or curved on plan exc 6m mean radious complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for DPC, finished even and fair complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on any faces of brick or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on any faces of brick or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for 10 mm thick rendering back coat on wall in CM 1:4 for receiving tiles etc; complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.18 sqm and not exc 0.38 sqm, in floor etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 450 x 350 x 7 mm thick on vertical surfaces of walls, dados etc; set and jointed in neat cement slurry and pointed in white or colour cement to matach the shade of tiles complete all as specified and directed.

S&F of 10 ltrs capacity PVC valveless, syphonic action type, flusing cistern, low level, white with inlet ball valve float and handle including bracket and all necessary fittings complete all as specified and directed.

S&F of vitreous china squatting pan orissa pattern 580x440mm white with traps including provision of concrete bedding and all necessary connection excluding flushing cistern and flush pipe complete all as specified and directed.

S&F of vitreous china urinal half stall type, white with union for discharge pipe including waste coupling, waste pipe and urinal spreader fixing with 15mm dia pipe complete all as specified and directed.

M&L for granite stone work 18-20 mm thick (of any colour/type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateform and like; in cement mortar (1:4) including pointing in white cement (1:2) using marble dust,with admixture of pigment to match the shade of granite including grinding, moulding and polishing complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping and similar work complete all as specified and directed.

M&L for stone dust layed in floors or paving etc; spread, levelled and rammed including watering complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block (reflective type) in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

S&F of wash hand basin, vitreous china, flat or angle back type and size 550x400mm including cutting for and pinning in ends of brackets or erecting stand with waste coupling and pipe complete all as specified and directed.

M&L for 5cm thick sand stone in sun shade, chajjas, shelves, cills, landings, cover stones, templates, etc n exc 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as per specified and directed.

S&F of PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suppling & fixing in opening as per specification and drawing complete all as specified and directed.

S&F of 100mm long stainless steel hinges and fixed to frames with screws complete all as specified and directed

S&F of factory made solid panel PVC door shtter 30mm thick (style), consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet stip of 20 mm width and plain colour PVC sheets for top raill, lock rail & bottom rail on eitgher side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame complete all as specified and directed

S&F of 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F of 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of galvanised iron pipe 15 mm bore medium grade with all fitting; laid in trenches or fixed on walls complete all specified and directed.

S&F of galvanised iron pipe 20 mm bore medium grade with all fitting; laid in trenches or fixed on walls complete all specified and directed.

S&F of PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F of PVC (SWR) 75 mm outlet floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F of 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F of powder coated aluminium frame of any colour for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc; complete all as specified and directed.

S&F of stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of 15 mm bore bib taps, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F of 15 mm stop valves, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F of 75mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches complete all as specified and directed.

S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches complete all as specified and directed.

S&F of 75mm bore PVC (SWR) pipe bend and fixed with solvent complete all as specified and directed.

S&F of 110mm bore PVC (SWR) pipe bend and fixed with solvent complete all as specified and directed.

S&F of 75mm bore PVC (SWR) junction single,(SingleT) equal or unequal and fixed with solvent complete all as specified and directed.

S&F of 110mm bore PVC (SWR) junction single,(SingleT) equal or unequal and fixed with solvent complete all as specified and directed.

S&F of 75mm bore PVC vent cowl complete all as specified and directed.

S&F of 110mm bore PVC vent cowl complete all as specified and directed.

S&F of 2000 ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) triple layer, hoisted and fixed in position all as speified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil emulsion distemper complete all as specified and directed

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated materials from site to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for cement concrete bed of PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) for 200mm dia drain pipes including bedding and hunching complete after pipes are laid, jointed and tested complete all as specified and directed.

M&L for cement concrete bed of PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) for 150mm dia drain pipes including bedding and hunching complete after pipes are laid, jointed and tested complete all as specified and directed.

S&F of 200mm bore RCC pipe, NP-2, grade 'A', laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed.

S&F of 150mm bore RCC pipe, NP-2, grade 'A', laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed.

M&L for cutting/filling into existing manholes for connecting new sewage line 200 mm bore incl making good to disturbed benching and haunching, plaster etc and forming new branch channel (½ round of ¾ section) if required in cement concrete 1:2:4 type B1 and smooth finished, reforming benching as required complete all as specified and directed. (Each Man hole shall be measured under this item )

M&L for RCC (Nominal mix) 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in slabs supported, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of formwork to side and soffits of beams ,lintels etc with flat rough finished concrete surfaces complete all as specified and directed.

S&F for mild steel TMT bars 10 mm dia and over, cut to length and bent to shape required, including cranking, bending spirally for hooping for side wall columns, hooking ends and binding with and including mild steel wire (annealed) not less 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 6mm dia and over upto and including 10mm dia in stirrups, spacers and binder, cut to length and bent to shape required, including cranking, bending spirally for hooping for side wall columns, hooking ends and binding with and including mild steel wire (annealed) not less 0.9 mm dia complete all as specified and directed.

S&F of PVC flexible waste pipe 32 mm dia with socket for steel sink and length not less than 0.60 M complete all as specified and directed.

S&F of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

M&L for 3mm thick wall care putty on wall/ceiling, finished even and smooth complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand in ratio 1:3 by weight complete all as specified and directed.

S&F of 15 mm wash basin mixer, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, screwed down high pressure, screwed for iron pipe etc and fixed complete all as specified and directed. Make: Jaquar Cat No: FLR-CHR-5001B or equivalent in Cera/ Hindware as approved by GE.

S&F handshower (Health faucet) with 8mm dia, 1 meter long flexible tube and wall hook fixed complete all specified and directed. Make: Jaquar Cat No- ALD-CHR-573 or equivalent in Cera/ Hindware as approved by GE.

S&F of stainless steel grating doom 100 mm dia with waste hole complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for concealed point wiring with single core PVC insulated unsheathed flexible conductor FRLS cables 1.5 sqmm as per IS 694:2010 ISI marked multistranded copper conductor drawn through and including medium grade PVC conduit of suitable size as required at site but not less than 20mm dia including modular type plate with all accessories and sunk terminal boxes flush galvanised metal boxes with and including 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FRLS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including making good to distrubed surfaces of wall with cement mortor 1: 3 complete (Note: Cost of cutting chase and making good shall be included in the quated rates) complete all as specified and directed at site for the following:-

(a) One light / fan/ bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

All as per item No. 80 here-in-before but wiring with 2.5 Sqmm copper cable FRLS for 5/15 Amp switch socket on independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly.

S&F of polycarbonate switch piano, flush button, single pole, one way, 5 Amp, 240 volts complete all as specified and directed.

S&F of ceiling rose, surface type, 3 terminal, 240 Volts complete all as specified and directed.

S&F of polycarbonate socket outlet 2-in-1, 5 pin 5 Amps, 240 volts, flush type complete all as specified and directed.

S&F of socket outlet flush type multipurpose 2 in 1, 5 pin 5/15 Amp, 240 volts complete all as specified and directed.

S&F of polycarbonate switch piano flush button single pole one way 15 Amps 240 volt complete all as specified and directed.

S&F of lamp holder insulated PVC/polycarbonate body with back plate for conduit/batten fittings with and including 9 Watt LED bulb complete all as specified and directed.

Taking down old unserviceable sub main wiring of any size and any discription complete all as specified and directed.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases to wall and making good the disturbed surfaces as per existing complete all as specified and directed. Notes:- Two runs of 4.0 sqmm cable & one run of 2.5 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit medium grade of size 25 mm dia ISI marked including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and directed. Notes:- Three runs of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

S&F in replacement of LED 24 watt recess mounting light fitting (2'x2' luminaire) with white powder coated CRCA housing with high power LEDs and aluminium front frame with flat white high power transmission acrylic cover including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified and directed. Make: Orient Cat Part No LTRAQ-24-C or equivalent in Philips/Crompton as approved by GE.

S&F of LED tube light with fitting 1x18 watt 220V, AC decorative box type with driver, holder including LED tube light and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F of LED light fitting mirror type with high output 2 ft, 10 watt 220 V AC connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of 300mm sweep exhaust fan made of steel with louvers shutter, voltage 230V , 50HZ, 1200 RPM of copper winding with all accessories complete all as specified and directed.

S&F in replacement ceiling fans with blades, down rods and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) with hook for hanging ceiling fan complete all as specified and directed. Make: Crompton Entrust or equivalent in Bajaj/ Havells as approved by GE.

S&F of DB, SPN, 8 way double door for MCB, 240 volt with 200 amps rated bus bar with enclosed blank plates for unuse points complete all as specified and directed.

S&F of MCB SP 6 to 32 Amps, 240 volts with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S&F of MCB SPN 40 to 63 Amps, 240 volts with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S&F of building security light fitting with 30 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 m long and MS clamps, nuts, bolts, washers and making connection with twin core cable 1.5 sqmm from ceiling rose to fittings connector complete all as specified and directed.

M&L for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4 mm dia by means of bolts, nuts, check nuts and washers galvanized iron or steel all as shown in electrical plate No-3 of MES SSR Part-I connected to earth test point and testing on completion including provision of earth lead protected by 15 mm bore light grade GI Pipe including all excavation and earth work in any type of strata, PCC pit with RCC cover, char coal, salt, funnel etc complete all as specified and directed. Notes: Rate quoted by tender are inclusine of following Provisions:- (i) Excavation & earth work including removing of surplus material. (ii) PCC 1:3:6 type C1 in pit & 40mm thick precast RCC 1:2:4 type B1 in cover of size 50x50cm reinforced with MS bar @ 15cm C/C bothways. (iii) Main earthing strip/wire from earth electrode to test point upto 7.5m. (iV) Funnel with watering pipe (GI pipe) 20mm bore (ISI Marked) medium grade & copper lugs and charcoal and salt as required. (v) GI Protection pipe of size 15mm bore light grade upto 7.5m.

Deduct Schedule of credit (calculation will be done off line) Rs. 494.00

Samaksh Enterprises

M/s VIKAS TRADERS