RFP for Selection of Agency for Repair and O and M of ITLS Control Centre and 37 Junctions in Jammu Municipal Corporation Area under budget head NCAP.

Replacement, Supply, Installation, Testing and Commisioning of Red LED Aspect Vehicular as per Specification. LED Viewing Angle29 Degrees, LED Forward current 20mA, Intensity of LED aspect 260cd (Minimum), Total power consumption maximum 10W, inclusive of all taxes , complete job as directed by engineer-incharge

Replacement, Supply, Installation, Testing and Commisioning of Amber LED Aspect Vehicular as per Specification.LED Viewing Angle29 Degrees ,LED Forward current 20mA,Intensity of LED aspect 380cd (Minimum),Total power consumption maximum 10W inclusive of all taxes , complete job as directed by engineer-incharge

Replacement, Supply, Installation, Testing and Commisioning of Green LED Aspect Vehicular as per Specification.LED Viewing Angle29 Degrees,LED Forward current 20mA,Intensity of LED aspect 100cd (Minimum),Total power consumption maximum 4W.inclusive of all taxes , complete job as directed by engineer-in-charge

Replacement, Supply, Installation, Testing and Commisioning of Pedestrian Red LED Aspect as per Specification.LED Forward current 20mA,Total power consumption maximum 4W,Intensity of LED aspect 65cd (Minimum) inclusive of all taxes , complete job as directed by engineer-in-charge

Replacement, Supply, Installation, Testing and Commisioning of Pedestrian Green LED Aspect as per Specification.LED Forward current 20mA,Intensity of LED aspect 65cd (Minimum),Total power consumption maximum 4W.inclusive of all taxes , complete job as directed by engineer-in-charge

Replacement, Supply, Installation , Testing and Commisioning of Traffic Signal controllers Slave Card inclusive of all taxes complete job as directed by engineer-in-charge, as per clause no 3.4 ( b ) of Section - 4 of Bid document.

Replacement, Supply, Installation , Testing and Commisioning of Traffic Signal controllers Master Card inclusive of all taxes complete job as directed by engineer-in-charge, as per clause no 3.4 ( b ) of Section - 4 of Bid document.

Replacement, Supply, Installation, Testing and Commisioning of Vehicle Detection Camera inclusive of all taxes complete job as directed by engineer-in-charge,as per clause no 3.4 (c ) of Section - 4 of Bid document.

Replacement, Supply, Installation, Testing and Commisioning of CIF Cards compitable for the vehicle detection cameras, inclusive of all taxes complete job as directed by engineer-incharge.

Replacement, Supply, Installation, Testing and Commisioning of Count Down Timers (CDT) inclusive of all taxes complete job as directed by engineer-in-charge as per clause no 3.4 (e) of Section - 4 of Bid document.

Replacement, Supply, Installation, Testing and Commisioning of 3C 2.5 Sq. mm Armoured Control Cables including restoration of affected area as per the existing specification of site, inclusive of all taxes complete job as directed by engineer-in-charge as per clause no 3.4 (f)of Section - 4 of Bid document.

Replacement, Supply, Installation, Testing and Commisioning of Multi core Armoured Cable including restoration of affected area as per the existing specification of site, inclusive of all taxes complete job as directed by engineer-in-charge as per clause no 3.4 (g) of Section - 4 of Bid document. 14C 1.5 Sq.mm Armoured Cable

Replacement, Supply, Installation, Testing and Commisioning of Multi core Armoured Cable including restoration of affected area as per the existing specification of site, inclusive of all taxes complete job as directed by engineer-in-charge as per clause no 3.4 (g) of Section - 4 of Bid document. 7C 1.5 Sq.mm Armoured cable

Replacement, Supply, Installation, Testing and Commisioning of 7C 0.75 Sq.mm Armoured cable including restoration of affected area as per the existing specification of site inclusive of all taxes complete job as directed by engineer-in-charge as per clause no 3.4 (h) of Section - 4 of Bid document.

Replacement, Supply, Installation, Testing and Commisioning of Standard pole 6 meter with foundation including restoration of affected area as per the existing specification of site inclusive of all taxes complete job as directed by engineer-in-charge as per clause no 3.4 (i & k) of Section - 4 of Bid document.

Replacement, Supply, Installation, Testing and Commisioning of Cantilever pole 6 meter with foundation including restoration of affected area as per the existing specification of site inclusive of all taxes complete job as directed by engineer-in-charge as per clause no 3.4 (j & l ) of Section - 4 of Bid document.

Replacement, Supply, Installation, Testing and Commisioning of 24V UPS inclusive of all taxes complete job as directed by engineer-in-charge.

Replacement, Supply, Installation, Testing and Commisioning of Batteries (12V, 100 AH each) inclusive of all taxes complete job as directed by engineer-in-charge.

Replacement, Supply, Installation, Testing and Commisioning of Batteries (12V, 18 AH each) inclusive of all taxes complete job as directed by engineer-in-charge.

Replacement, Supply, Laying, Testing and Commisioning of HDPE 90MM Duct including restoration of affected area as per the existing specification of site inclusive of all taxes complete job as directed by engineer-in-charge.

Replacement, Supply, Installation , Testing and Commisioning of 7C 0.5 sq.mm flexible cable including restoration of affected area as per the existing specification of site inclusive of all taxes complete job as directed by engineerin- charge.

Replacement, Supply, Installation , Testing and Commisioning of 24 V Power Supply inclusive of all taxes complete job as directed by engineer-in-charge.

Replacement, Supply, Installation , Testing and Commisioning of 12 V Power Supply inclusive of all taxes complete job as directed by engineer-in-charge.

Supply, Installation , Testing and Commisioning of Ethernet Surge Protector inclusive of all taxes complete job as directed by engineer-in-charge.

Replacement, Supply, Installation, Testing and Commisioning of Earthing (Rod Type – 3 M, Chemical Type) including restoration of affected area as per the existing specification of site inclusive of all taxes complete job as directed by engineer-in-charge.

Replacement, Supply, Installation , Testing and Commisioning of Battery-UPS Enclosures with Foundation including restoration of affected area as per the existing specification of site inclusive of all taxes complete job as directed by engineer-in-charge.

Supply & application of primer to the Road Traffic Signal Controller foundation two coats as per technical specification.

Supply & application of the yellow & purple coloured strips to the Controller foundation of Road Traffic Signal Controller as per technical Specification and drawing.

Supply & painting of Junction Name, junction Number, no sticking of bills with Black Paint to the Road Traffic Signal Controller cabinet of M.S. material as per Technical Specification and drawing.

Painting Junction Number, Meter Number/consumer number etc with Black Paint to the Road Traffic Signal Controller Power supply box of M.S. material as per Technical Specification.

Supply & painting of Junction Name,Installation Number, no sticking of bills etc with Carving letters on Green colour retro-reflective sheeting of approved make vide MORTH specification and as per Technical Specification and drawing to the Road Traffic Signal Controller cabinet.

Painting Junction Number, Meter Number etc with Carving letters on Green colour retro-reflective sheeting of approved make vide MORTH specification and as per Technical Specification and drawing to the Road Traffic Signal Controller Power supply box.

Supply & painting of yellow coloured circles on straight poles & cantilever poles as per technical specification and drawing

Supply & Painting of pole numbers to the Road Traffic Signal poles in the yellow circle with black paint as per technical specification and drawing.

Supply & Painting controller cabinet with two coats of synthetic enamel paint over a coat of Zinc chromate primer as per technical specification and directions of the Engineer-in-Charge.

Supply & Painting power supply box cabinet with two coats of synthetic enamel paint over a coat of Zinc chromate primer as per technical specification and directions of the Engineer-in-Charge.

Supply & Painting straight pole with two coats of synthetic enamel paint over a coat of Zinc chromate primer as per technical specification and directions of the Engineer-in-Charge.

Supply & Painting cantilever pole with two coats of synthetic enamel paint over a coat of Zinc chromate primer as per technical specification and directions of the Engineer-in-Charge.

Excavation of trench for traffic signals and VMS boards cables and conduiting as per requirement of the signal junction up to the depth of 1000mm below the ground surface and width 500mm in the Carriage way (Asphalt/ Mastic Asphalt/ paver block) including refilling of the trench in carriage way and removal of debris as per the guidelines.

Excavation of trench for traffic signals and VMS boards cables and conduiting as per requirement of the signal junction up to the depth of 1000mm below the ground surface and width 500mm in the Carriage way (Cement Concrete) including refilling of the trench in carriage way and removal of debris as per the guidelines.

Excavation of trench for traffic signals and VMS boards cables and conduiting as per requirement of the signal junction up to the depth of 600mm below the ground surface and width 500mm in the footpath/soft soil including refilling of the trench in footpath and removal of debris as per the guidelines.

Cutting of two rows RCC/PQC carriageway slabs upto slab depth by special RCC Cutting machine (Diamond Cutter) for laying duct with double cut.

Excavate and install brick built or equivalent sectional chamber to be 450mm (L)X 450mm (B) X 600 mm(D) to tie into proposed 120 mm ducts/65mm G.I.Pipe in footpath include permanent reinstatement and backfill material as per technical specification and drawing.

Excavate and install brick built or equivalent sectional chamber to be 450mmX 450mmX 1000 mm to tie into proposed 120 mm ducts/65mm G.I.Pipe in footpath include permanent reinstatement and backfill material as per technical specification and drawing.

Excavate and install brick built or equivalent sectional chamber to be 560mm (L)X 450mm (B) X 600 mm(D) to tie into proposed 120 mm ducts/65mm G.I.Pipe in footpath include permanent reinstatement and backfill material as per technical specification and drawing no. RT.14.19

Excavate and install brick built or equivalent sectional chamber to be 560mm (L)X 450mm (B) X 1000 mm(D) to tie into proposed 120 mm ducts/65mm G.I.Pipe in footpath include permanent reinstatement and backfill material as per technical specification and drawing.

Supply and installation of FRP chamber cover without frame 510mm (L)X 510mm (B) X 35mm thick as per EN 124 grade B to take load 12.5 MT as per drawing.

Supply and installation of FRP chamber cover without frame 620mm (L)X 510mm (B) X 35mm thick as per EN 124 grade B to take load 12.5 MT as per drawing.

Supply and installation of M.S. chamber cover frame to accommodate the chamber cover of size 510mm (L)X 510mm (B) X 35mm thick as per drawing.

Supply and installation of M.S. chamber cover frame to accommodate the chamber cover of size 620mm (L)X 510mm (B) X 35mm thick as per drawing.

Erecting straight pole in pole foundation of concrete M20 grade circular in shape of depth 1.3m below and/or above ground level having dia. Of 300mm only, as per technical specification and drawing.

Erecting cantilever pole in pole foundation of concrete M20 grade circular in shape of depth 1.3m below and/or above ground level having dia. Of 450mm only, as per technical specification and drawing.

Construction of signal controller foundation upto 600mm height above ground level and 600 mm below ground level on C.C. M20 grade pedestal, having size (LXBXH) with fixing of SS304 nut bolts for controller cabinet & Power supply box cabinet as per technical specification and drawing etc.complete

Construction of foundation for New type LED cantilever Traffic Signal pole including foundation bolts as per technical specification and drawing

Supply, installation, testing and commissioning of 3 kVA UPS along with batteries providing 30 minutes back up for 3 kVA UPS including MS powder quoted battery rack

Supply, installation, testing and commissioning of 5 kVA UPS along with batteries providing 30 minutes back up for 5 kVA UPS including MS powder quoted battery rack

Supply, installation, testing and commissioning of 8 kVA UPS along with batteries providing 30 minutes back up for 8 kVA UPS including MS powder quoted battery rack

Supply, installation, testing and commissioning of 10 kVA UPS along with batteries providing 120 minutes back up for 10 kVA UPS including MS powder quoted battery rack

Supply, installation, testing and commissioning of 8 ports 10/100/1000 Base T and 2x 1G SFP LAN Ethernet Switch

Supply and installation of HP Laserjet Printer (Black & White)

Supply & installation of PC upgrades additional RAM of 2GB

Supply & installation of PC upgrades additional RAM of 4GB

Supply & installation of PC upgrades additional RAM of 8GB

Supply of Keyboard

Supply of optical Mouse

Antivirus (Total Security including Internet) Renewal/ updates validity for 2 years

Memory for CCTV - 1 TB SATA 2.5" HDD (Hot swappable) - For Server

Supply, intsallation of Operator terminal Intel Processor based PC with i7 processor, 1TB HDD, 16GB RAM, 20.5 inch LED Monitor, 4 GB graphic card with NVIDA facility, with the Licencse copy of operating System, Microsoft office. With 256 GB SSD

Supply, intsallation of HP Workstations Z220 SFF/Intel i7/8 GB/500 GB/Win 10 64 Bit/1 GB Graphic Card/3 Years Onsite Warranty

Operation and Maintainance cost for a period of 1 years (Phase-1 & Phase-2), inclusive all taxes.1st year