OFFLOADED MECHANICAL WORKS OF CITY GATE STATION (CGS-2) DAHIYAR AT DARBHANGA GA IN STATE OF BIHAR FOR CITY GAS DISTRIBUTION PROJECT OF M/S BPCL

SCHEDULE OF RATES, MECHANICAL

CITY GAS DISTRIBUTION PROJECT OF (CGS-2) DAHIYAR AT DARBHANGA GA BIHAR | REV-C1

ITEM NO. | WORK DESCRIPTION | UNIT | QUANTITY | UNIT RATE

(INCLUSIVE OF ALL APPLICABLE TAXES & DUTIES, FREIGHT, TRANSIT INSURANCE AND ANY OTHER INCIDENTAL COST) EXCEPT GST

(INR) | TOTAL AMOUNT

(INCLUSIVE OF ALL APPLICABLE TAXES & DUTIES, FREIGHT, TRANSIT INSURANCE AND ANY OTHER INCIDENTAL COST) EXCEPT GST

(INR) | REMARKS

WORKS FOR (CGS-2) DAHIYAR AT DARBHANGA GA BIHAR (PIPING & MECHANICAL)

PI001.00.00 | FABRICATION, ERECTION, INSTALLATION AND TESTING OF PIPING

Receiving and taking over of all Owner supplied materials from Owner's designated place(s) of issue, transportation including loading, unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s) / work site(s) / work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials (except those specified subsequently in SOR), equipment, consumables as defined in Contractor's scope of supply and their transportation to the work site(s); performing all above ground/buried piping fabrication works including cutting, edge preparation (inclusive of grinding the edges of pipes, fittings, flanges etc. to match with the matching edges of uneven / different thickness wherever required), fit up, bending, pre-heating wherever required, welding, threading etc.; erection of pipes of all types and thickness over sleepers, overhead on racks and at all elevations; hook-up with equipment nozzles; all types of inline and online instruments such as pressure / thermal safety valves (other than those covered separately), fittings of all sizes i.e., elbows, reducers, tees, 'o' lets, flanges, blind flanges, spectacle blinds, tapping's for pressure gauges, thermowells, hoses and hose couplings of all sizes, if applicable, vents and drains required for process and hydrotesting purposes etc. including fixing of all types of gaskets (including gaskets for RTJ flanges), bolts, studs and nuts of all sizes; carrying out non-destructive testing (excluding radiography covered subsequently in SOR) such as magnetic particle/ liquid penetration etc. as required; hook-up with existing piping / pipeline installed by others as per drawings wherever required; cleaning and flushing by water / compressed air, carrying out hydrostatic test, pneumatic test, valve functional test and any other type of testing as specified, de-pressurising, dewatering, drying by compressed air if applicable; cutting / rebeveling (as required), pre-commissioning and providing commissioning assistance to Commissioning Contractor / Agency for process piping and commissioning of non-process piping if applicable; clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue materials to Owner's designated place(s); completing all works in all respects as per the AFC drawings, specifications, standards and other provisions of Contract and instruction of Engineer-in-Charge.

a) Installation of equipment shall be done by bidder as per directions, supervision and guidance of equipment manufacturer Engineer. Bidder shall inform at least 15 days before to owner for mobilizing of Vendor Engineer to site. Commissioning shall be done in presence & guidance of equipment manufacturer Engineer.

b) All butt welded fittings end shall generally match with connecting pipe wall thickness. However, in case of misalignment, contractor shall have to do end preparation accordingly without any extra cost.

c) All couplings, nipples, plugs for nipple etc. as required shall be supplied by contractor without any extra cost.

d) All Gaskets & Nut-Bolts of adequate quantity shall be supplied and installed without any extra cost.

e) All valves & pipes 2" and below shall be supplied & installed by the contractor under this item, Contractor to quote accordingly.

f) All sizes of fittings items & flanges shall be supplied & installed by the contractor under this item, Contractor to quote accordingly.

g) Any branch connection taken from mainline shall be considered under this SOR item only.

h) NDT/Radiography of pipes, flanges & fittings, valves etc. for sizes 2" & below included in this item. Contractor to quote accordingly.

No extra cost shall be paid for the above items.

PI001.01.00 | Installation of above ground Carbon Steel Process Piping as per details given below:

PI001.01.01 | Size-12 Inch, Thk/Sch-9.5 mm, Material-API 5L Gr X52 PSL2, BE, Seamless, Dimension Std.-B 36.10 (60HCML Main Line) | M |

PI001.01.02 | Size-12 Inch, Thk/Sch-17.48 mm, Material-ASTM A106 Gr B (CHARPY), BE, Seamless, Dimension Std.-B 36.10(60HC) | M |

PI001.01.03 | Size-12 Inch, Thk/Sch-STD, Material-ASTM A106 Gr B (CHARPY), BE, Seamless, Dimension Std.-B 36.10(30HC) | M |

PI001.01.04 | Size-4 Inch, Thk/Sch-STD, Material-ASTM A106 Gr B (CHARPY), BE, Seamless, Dimension Std.-B 36.10 | M |

PI001.01.05 | Size-4 Inch, Thk/Sch-XS, Material-ASTM A333 Gr 6, BE, Seamless, Dimension Std.-B 36.10 | M |

PI001.01.06 | Size-4 Inch, Thk/Sch-STD, Material-ASTM A333 Gr 6, BE, Seamless, Dimension Std.-B 36.10 | M |

PI001.01.07 | Size-4 Inch, Thk/Sch-XS, Material-ASTM A106 Gr B (CHARPY), BE, Seamless, Dimension Std.-B 36.10 | M |

PI001.02.00 | INSTALLATION OF VALVES

Receiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, loading , unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.

a.) All valves & pipes 2" and below shall be supplied & installed by the contractor under this item, Contractor to quote accordingly.

b.) All sizes of fittings items & flanges shall be supplied & installed by the contractor under this item, Contractor to quote accordingly.

b.) All bolts, nuts, gaskets of all size shall be supplied & installed by the contractor under this item, Contractor to quote accordingly.

c.) Contractor works includes all work including tie in with exisitng terminal inside Station and with pipeline

PI001.03.00 | Installation, Calibration and Commissioning of Above Ground Butt Weld Ends DGAV Ball Valves and DGAV Actuator as per Standard Specification, Data Sheets, P&IDs as per details given below:

PI001.03.01 | Size-12 Inch, Rating-300# | NOS. |

PI001.04.00 | Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

PI001.04.01 | Size-4 Inch, Rating-300# | Nos. |

PI001.04.02 | Size-4 Inch, Rating-600# | Nos. |

PI001.05.00 | Installation of above ground Butt Welded Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

PI001.05.01 | Size-12 Inch, Rating-600# | Nos. |

PI001.06.00 | Installation of Insulating Joint as per details given below:

PI001.06.01 | Size-12 Inch, 300# | NOS. |

PI001.06.02 | Size-12 Inch, 600# | NOS. |

PI002.00.00 | Supply including procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for the following materials to be supplied by Contractor as per the requirement of PMS, specifications, data-sheets, standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract.

PI002.01.00 | FLANGES

PI002.02.00 | Supply of Weld Neck Raised Face (WNRF) Flanges as per details below:

PI002.02.01 | Size-12 Inch, 600#, Thk/Sch-17.48mm,ASTM A105(CHARPY), Face/Finish-600, RF/125AARH, Dimension Std.-ASME B16.5 | Nos. |

PI002.02.02 | Size-12 Inch, 600#, Thk/Sch-9.5mm, ASTM A694 GR.F52, Face/Finish-600, RF/125AARH, Dimension Std.-ASME B16.5 (60HCML Main Line), with JS Holes | Nos. |

PI002.02.03 | Size-12 Inch, 300#, Thk/Sch-STD, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5 | Nos. |

PI002.02.04 | Size-4 Inch, 600#, Thk/Sch-XS, Material-ASTM A105 (CHARPY), Face/Finish-600, RF/125AARH, Dimension Std.-ASME B16.5 | Nos. |

PI002.02.05 | Size-4 Inch, 300#, Thk/Sch-STD, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5 | Nos. |

PI002.02.06 | Size-4 Inch, 300#, Thk/Sch-STD, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5, with JS Holes | Nos. |

PI002.02.07 | Size-4 Inch, 600#, Thk/Sch-STD, Material-ASTM A350 GR.LF2, Face/Finish-600, RF/125AARH, Dimension Std.-ASME B16.5 | Nos. |

PI002.02.08 | Size-4 Inch, 600#, Thk/Sch-STD, Material-ASTM A350 GR.LF2, Face/Finish-600, RF/125AARH, Dimension Std.-ASME B16.5, with JS Holes | Nos. |

PI002.02.09 | Size-4 Inch, 600#, Thk/Sch-STD, Material-ASTM A350 GR.LF2, Face/Finish-150, RF/125AARH, Dimension Std.-ASME B16.5 | Nos. |

PI002.03.00 | Supply of Blind Flanges as per details below:

PI002.03.01 | Size-4 Inch, 600#, Material-ASTM A105 (CHARPY), Face/Finish-600, RF/125AARH, Dimension Std.-ASME B16.5 | Nos. |

PI002.03.02 | Size-4 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5 | Nos. |

PI002.04.00 | Supply of Spacer and Blind /Fig 8/ Spectacle Blind as per details given below:

PI002.04.01 | Size-12 Inch, 600#, Thk/Sch-9.5 mm, Material-ASTM A694 GR.F52, Face/Finish-600, FF/125AARH, Dimension Std.-ASME B16.48 (60HCML Main Line) | Nos. |

PI002.04.02 | Size-4 Inch, 600#, Material-ASTM A350 GR.LF2, Face/Finish-600, FF/125AARH, Dimension Std.-ASME B16.48 | Nos. |

PI002.04.03 | Size-4 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, FF/125AARH, Dimension Std.-ASME B16.48 | Nos. |

PI002.5.00 | FITTINGS

PI002.6.00 | Supply of R=6D, 90° BW Bend as per details given below:

PI002.6.01 | Size-12 Inch, Thk/Sch-9.5 mm, Material-API 5L Gr X52 PSL2, BE, Seamless, Dimension Std.-B 36.10 (60HCML Main Line) | Nos. |

PI002.7.00 | Supply of R=6D, 45° BW Bend as per details given below:

PI002.7.01 | Size-12 Inch, Thk/Sch-9.5 mm, Material-API 5L Gr X52 PSL2, BE, Seamless, Dimension Std.-B 36.10 (60HCML Main Line) | Nos. |

PI002.8.00 | Supply of R=1.5D, 90° BW Elbow as per details given below:

PI002.8.01 | Size-12 Inch, Thk/Sch-17.48, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9 | Nos. |

PI002.8.02 | Size-12 Inch, Thk/Sch-STD, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9 | Nos. |

PI002.8.03 | Size-4 Inch, Thk/Sch-XS, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9 | Nos. |

PI002.8.04 | Size-4 Inch, Thk/Sch-STD, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9 | Nos. |

PI002.8.05 | Size-4 Inch, Thk/Sch-XS, Material-ASTM A420 Gr.WPL6, Dimension Std.-ASME B 16.9 | Nos. |

PI002.8.06 | Size-4 Inch, Thk/Sch-STD, Material-ASTM A420 Gr.WPL6, Dimension Std.-ASME B 16.9 | Nos. |

PI002.9.00 | Supply of R=1.5D, 45° BW Elbow as per details given below:

PI002.9.01 | Size-12 Inch, Thk/Sch-STD, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9 (30 HC) | Nos. |

PI002.10.00 | Supply of BW Flow Tee as per details given below:

PI002.10.01 | Size-12 Inch x 12 Inch x 12 Inch 600#(60HCML) | Nos. |

PI002.11.00 | Supply of BW Reducing Tee as per details given below:

PI002.11.01 | Size-4 Inch x 2 Inch, Thk/Sch-STD x XS , Material - ASTM A 234 Gr. WPB, (CHARPY) Dimension Std.-ASME B 16.9 | Nos. |

PI002.11.02 | Size-4 Inch x 2 Inch, Thk/Sch- XS x XS , Material - ASTM A420 Gr. WPL6, Dimension Std.-ASME B 16.9 | Nos. |

PI002.12.00 | Supply of Weldolet BW as per details given below:

PI002.12.01 | Size-12 Inch X 2 Inch, 600#, Thk/Sch-9.5mm x XS , Material-ASTM A694 F52, Dimension Std.-MSS-SP 97 (60HCML) | Nos. |

PI002.12.02 | Size-12 Inch X 2 Inch, 600#, Thk/Sch-17.48mm x XS, Material-ASTM A105 (CHARPY), Dimension Std.-MSS-SP 97 | Nos. |

PI002.12.03 | Size-12 Inch X 2 Inch, 300#, Thk/Sch-STD x XS, Material-ASTM A105 (CHARPY), Dimension Std.-MSS-SP 97 | Nos. |

PI002.12.04 | Size-12 Inch X 4 Inch, 600#, Thk/Sch-17.48, x XS Material-ASTM A105 (CHARPY), Dimension Std.-MSS-SP 97 | Nos. |

PI002.12.05 | Size-12 Inch X 4 Inch, 300#, Thk/Sch-STD x STD, Material-ASTM A105 (CHARPY), Dimension Std.-MSS-SP 97 | Nos. |

PI002.13.00 | Supply of Sockolet as per details given below:

PI002.13.01 | Size-12 Inch X 1 Inch, 3000#, Material-ASTM A105, Dimension Std.-MSS-SP 97 | Nos. |

PI002.13.02 | Size-4 Inch X 1 Inch, 3000#, Material-ASTM A105, Dimension Std.-MSS-SP 97 | Nos. |

PI002.14.00 | Supply of Insulating Joint as per Material Requisition and attached Data Sheet with Station Work Tender.

PI002.14.01 | Size-12 Inch, 600#, Thk/Sch-9.5 mm, Material-ASTM A694 F52 | NOS. |

PI002.14.02 | Size-12 Inch, 300#, Thk/Sch-STD, Material-ASTM A694 F52 | NOS. |

PI002.15.00 | Supply of Piping as per details given below:

PI002.15.01 | Size-12 Inch, Thk/Sch-9.5 mm, Material-API 5L Gr X52 PSL2, BE, Seamless, Dimension Std.-B 36.10 (60HCML Main Line) | M |

PI002.15.02 | Size-12 Inch, Thk/Sch-17.48 mm, Material-ASTM A106 Gr B (CHARPY), BE, Seamless, Dimension Std.-B 36.10(60HC) | M |

PI002.15.03 | Size-12 Inch, Thk/Sch-STD, Material-ASTM A106 Gr B (CHARPY), BE, Seamless, Dimension Std.-B 36.10(60HC) | M |

PI002.15.04 | Size-4 Inch, Thk/Sch-STD, Material-ASTM A106 Gr B (CHARPY), BE, Seamless, Dimension Std.-B 36.10 | M |

PI002.15.05 | Size-4 Inch, Thk/Sch-XS, Material-ASTM A333 Gr 6, BE, Seamless, Dimension Std.-B 36.10 | M |

PI002.15.06 | Size-4 Inch, Thk/Sch-STD, Material-ASTM A333 Gr 6, BE, Seamless, Dimension Std.-B 36.10 | M |

PI002.15.07 | Size-4 Inch, Thk/Sch-XS, Material-ASTM A106 Gr B (CHARPY), BE, Seamless, Dimension Std.-B 36.10 | M |

PI003.00.00 | RADIOGRAPHY:

PI003.01.00 | Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. Contractor to submit DPR, Inspection Report along with Radiography Report to Engineer-in-Charge.

Radiography of piping joints as per details given below:

PI003.01.01 | Size-12 Inch | Nos. |

PI003.01.02 | Size-4 Inch | Nos. |

PI004.00.00 | PIPE SUPPORTS

PI004.01.00 | Supplying, Fabricating & Erecting in position steel structures fabricated out of MS Girders, channels, Tees, angle, flats, plate, square hollow sections pipes etc. conforming to IS:2062 and/or from pipes conforming to IS:1161 for structural purpose for cascade supporting structure, loading/unloading platform, Gratings for platform, catladder,handrails, hoardings for sinages,Lcv stand, SS Tube supports, SS tube trench covers etc. of any size/dia for required design including cutting, welding, bolting, hoisting, fixing in position, including application of one coat of primer at shop and second coat of primer at site after erection and two coats of finishing paint at site .The work is to be completed in all respect as per specification ,scope of work, detailed construction drawings and directions of the Engineer-in-charge. | KG |

PI005.00.00 | PAINTING

PI005.01.00 | Supply of paints, solvents and primers, preparation of surfaces and application of primer and finish paints suitable for normal corrosive painting environment as defined in contract document and on pipes as per standard specification for painting specification no. VPC-SS-PI-0008, identification, lettering/ numbering, colour coding etc. as specified including rub down and touch up of shop primer or scrapping of shop primer wherever required and providing of scaffolding for all heights, labour, materials, tools and tackles, consumables, supervision etc. to complete the work in all respect as per Specification, Drawings, Standards and instruction of Engineer-in-Charge.

a) All painting work for sizes 2" and below are covered under this SOR item. No separate payment shall be made.

PI005.02.00 | Painting of all above ground piping including all fittings, valves, flanges etc. and including colour bands

PI005.02.01 | Size-12 Inch, Painting Environment-Corrosive Normal Environment (Above Ground) | M |

PI005.02.02 | Size-4 Inch, Painting Environment-Corrosive Normal Environment (Above Ground) | M |

PI006.00.00 | Fire Fighting Equipment

Supply, installation and commissioning of the following fire fighting equipment

PI006.01.00 | SUPPLY AND INSTALLATION OF FIRE EXTINGUISHER AT CGS

Note:- Contractor to check and supply the FIRE EXTINGUISHER items/Quantity as per the PNGRB and OISD requirements.

PI006.01.01 | 5 kg capacity DCP type | Nos. |

PI006.01.02 | 9 kg capacity DCP fire extinguisher | Nos. |

PI006.01.03 | 4.5 kg capacity CO2 fire extinguisher | Nos. |

PI006.01.04 | Supply and Installation of DCP - 75 Kg | Nos. |

PI007.00.00 | SUPPLY OF RAIN CAP

PI007.01.00 | Supply and Installation of Rain Cap including all necessary fabrication works, including providing all necessary equipment's, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, data sheet, specifications enclosed with the Contract and directions of Engineer-in-Charge.

PI007.01.01 | 4" Rain Cap for Vent, 15HLT | Nos. |

PI008.00.00 | Nitrogen Supply

PI008.01.01 | Supply of Nitrogen with cylinder for localized purging, Hook up of pipeline and piping. | M3 |

PI009.00.00 | INSTALLATION OF MISC. EQUIPMENTS

PI009.01.00 | Transportation of all equipments along with all accessories supplied by supplier etc. from owner's storage point / designated location to work site including loading and unloading, erection of all equipments including layout marking at site, fabrication and installation of shims including cutting and grinding, installation and levelling of base plates, assembly of sub-assemblies, bolting, fitting of all interconnected piping items (supplied by equipment supplier), shifting and reconfiguration of spreader beams, installation of rigging apparatus for erection crane, alignment of equipment at all elevations as per drawings, removal, placing and shifting of stools and saddles including loading and unloading, installation of all mountings and accessories, all enabling work as required, and completing the work in all respects as per drawings, specification, codes and instruction of Engineer-in-Charge.

a) Actual rate shall be paid to contractor based on actual weight of items.

PI009.01.01 | Check Metering System - Qty. 01 No. | MT |

PI009.01.02 | PRS - Qty. 01 No. | MT |

PI010.00.00 | INSTALLATION OF MECHANICAL EQUIPMENTS

PI010.01.00 | Transportation of all equipments (Static & Rotary) along with all accessories supplied by supplier etc. from owner's storage point / designated location to work site including loading and unloading, erection of all static / rotary equipments including layout marking at site, fabrication and installation of shims including cutting and grinding, installation and levelling of base plates, assembly of sub-assemblies, bolting, fitting of all interconnected piping items (supplied by equipment supplier), shifting and reconfiguration of spreader beams, installation of rigging apparatus for erection crane, alignment of equipment at all elevations as per drawings, removal, placing and shifting of stools and saddles including loading and unloading, installation of all mountings and accessories, all enabling work as required, and completing the work in all respects as per drawings, specification, codes and instruction of Engineer-in-Charge.

a) Actual rate shall be paid to contractor based on actual weight of items.

PI010.01.01 | Gas Generator Unit-Qty. 01 No. | MT |

PI010.02.00 | Erecting in position the following equipment.

Contractor's scope shall include supply of Crane/Hydra, lifting equipments, all material and accessories including but not limited to any fixtures, clamps, gasket, nut bolts, etc. :

PI010.02.01 | Erection of 1200 SCMH Online Compressor with lifting equipment | Nos. |

PI012100.00 | SINAGE BOARDS

PI011.01.00 | Providing and fixing of Mandatory signs made of 4 mm thick ACM (Aluminum Composite material) sheets cladded on structural frame work material / LOGO in Retro reflective sheet duly pasted on ACM in required size and complete as per instructions of Engineer-In-charge.

PI011.01.01 | Providing & Fixing Mandatory Signs | SQM |

PI012.00.00 | SLOGAN PAINTING

PI012.01.00 | Painting of slogans/ boards/ lettering on plastered wall/ MS boards, AC sheets etc. at heights as indicated below as directed at site. Rate to include for all scaffolding, staging, supply and providing of required colour 1st quality synthetic enamel paint for the letters as well as the back ground. Paint area measured once shall be considered for payment purpose.(Visual Identity designs as per Visual Identity manual) at all heights | SQM |

PI013.00.00 | POLIHED GRANITE FACIA

PI013.01.00 | Providing and laying mirror polished Black granite 20mm thk over Front wall including engraving BPCL Logo and lettering using stainless steel letters. Each granite facia shall be minimum 3.2 sq. mt. (2 by 1.6 m approx.). | EA |

PI014.00.00 | INTERNAL SIGNAGE BOARDS

PI014.01.00 | Supply and Installation of Mandatory Signs made of 3mm ACM Sheet and Printed on ECO Vinyl Sheet 300x100 mm. Detail specification as given in Tender | EA |

PI015.00.00 | Supply, Installation, commissioning of Eye/Face wash and safety shower with Pedal, made of Galvanized Iron material as instructed by Engineer-in- Charge. | Nos. |

PI016.00.00 | STATUTORY APPROVAL

PI016.01.00 | DM NOC approval

All works related to DM NOC Approval, including Drawing preparation and submission of application with drawings & necessary documents as required by department, liasioning and getting permission | Nos. |

PI016.02.00 | PESO approval -

All works related to PESO approval, including Drawing preparation and submission of application with drawings & necessary documents as required by department, liasioning and getting permission i.e. initial, Final (Grant) and Endorsement and Stamping of MFM and dispensers | Nos. |

PI016.03.00 | All works related to Ingress and Egress approval from local road authority if required | Nos. |

PI016.04.00 | Pollution control board

All works related to Pollution control board, Application, including Drawing preparation and submission of application with drawings & necessary documents as required by department, liasioning and getting permission | Nos. |

PI016.05.00 | Electricity connection

All works related to Electricity connection, including Drawing preparation and submission of application with drawings & necessary documents as required by department, liasioning and getting permission. | Nos. |