Supply, Erection and commissioning of 03 No. 10 Cs 2 No. 5 Cs AFVT Pumps having lift 25 30 feet, alongwith suitable motors 1 No. LT panel of 800 Amp and Starter of various capacity at left side JLN 14.700 Km Permanent (New) Flood Pump Houses

Amount

Supply, erection and commissioning of 10Cs. V.T. Axial flow Pump having lift 25±1ft, around 980 RPM, Including MS delivery of 8 mm thickness (approx length - 70 feet each) & bend complete in all respect as per site requirement & specification approved by technical committee (Annexure - A).

Supply, erection and commissioning of induction motor of 60 HP suitable for 10 Cs VT axial flow pump (mentioned at Sr no. 01), 45 KW, 980 RPM, 415V, 3 phase, 50 Hz bearing SKF /FAG, IE-2 as per specifications and site requirements (Annexure - B).

Supply, erection and commissioning of 05Cs. V.T. Axial flow Pump having lift 25±1ft, 1440 RPM Including MS delivery of 8 mm thickness (approx length - 70 feet each) & bend complete in all respect as per site requirement & specification approved by technical committee (Annexure - A).

Supply, erection and commissioning of induction motor of 40 HP, 1440 RPM, suitable for 05 Cs VT axial flow pump (mentioned at Sr no. 03), 30 KW, 415V, 3 phase, 50 Hz bearing SKF /FAG, IE-2 as per specifications and site requirements (Annexure - B).

Supply, erection and commissioning of LT Panel as per IP-54 with 01no incomer ACB 800 Amp 4 pole, 01no voltmeter, 01no ammeter and 05 Nos. outgoings/bus bars so that it can be connected to 05No ATS starters with stand of MS Channel/angle (1 feet height from floor level) as per approved specification (as per Annexure-C)

Supply of 70HP fully Automatic ATS Starter 415 V, 50 Hz with contractors of 120A/80A/60A for 60HP motor with minimum incomer MCCB 200amp, meters, relays, indicators complete in all respect with degree of protection IP-55 and with canopy including connection and small item like thimble, nut bolts, lugs etc with stand of MS angle 50x50x6 mm of 1 feet height from floor level and with allied accessories as per makes and specification.(as per Annexure-C)

Supply of 50HP fully Automatic ATS Starter 415 V, 50 Hz with contractors of 80A/52A/52A for 40HP motor with minimum incomer MCCB 125amp, meters, relays, indicators complete in all respect with degree of protection IP-55 and with canopy including connection and small item like thimble, nut bolts, lugs etc with stand of MS angle 50x50x6 mm of 1 feet height from floor level and with allied accessories as per makes and specification.(as per Annexure-C)

Supply, errection and commissioning of LT cable 3.5 core - 300 Sq mm Aluminium Conductor, XLPE insulated, Armored cable from Transformer to Motor Control Centre.

Supply, errection and commissioning of LT cable 3 core - 95 Sq mm Aluminium Conductor, XLPE insulated, Armored cable from Starter to Motor.

Providing and fixing of chemical earthing by digging 200 mm bore, 10 ft depth complete with copper electrode, copper strip for MCC panel complete in all respect as per site requirement

Make of Pumps- Kirloskar, Wilo, Flowmore, WPIL, Xylem, GITA(upto 60 cs.) & Sintech(upto 60 cs.). Make of Motors - LV Motor- Marathon, ABB, Kirloskar Electric, Siemans, Crompton, Jyoti, BCH, Bharat Bijli. Make of Panels - LV Panel- Siemans, ABB, L&T, Schneider, G.E. C&S, Havells, BCH, Legrand, AE & PSG(upto 30 HP). Terms & Conditions:- 1. The tender rate will be inclusive all taxes as applicable including GST. 2. The tender rate will be for F.O.R. destination and inclusive of all incidental charges, enroute & at destination. Nothing extra shall be paid separately. 3. WWC@1% will be deducted from the each bill of the agency. 4. Department will not be responsible for non submission of BOQ / Bid Document online by due date, due to any fault of internet/ E-tendering. 5. Third Party Testing by T.P.I.A. will be carried out in the presence of departmental representative at the manufacturer premises and cost of the same will be borne by the successful agency. 6. The warranty of the work shall be as per Service Level agreement from the date of commissioning. 7. Time period for completion of work 6 Months from the issue date of order to proceed with the work. 8. Payment schedule, as per bidding documents & 70% payment be made as per pro-rata basis. 9. Payment shall be made on finished goods and not on casting only. 10. The material will be supplied as per drawing and newly approved technical specifications laid down in tender documents & subsequent submission by bidder in this regard. 11. Authorization from OEM (Pump, Motor) be attached if tenderer is not a manufacturer. 12. Each page of bid book will be signed by the tenderer as a token of acceptance of terms and conditions. 13. Bidders may visit to the sites before quoting the tender rates. 14. Bidders should have executed similar nature work in any Center Government / State Government/ Public Sector Undertaking / Central Autonomous Body for minimum value equivalent to 50 % of quoted value in last 3 years alongwith existing criteria as per bid i.e. bidder should have completed at least 25% of quantity of similar nature work. 15. ln case, the material offered for inspection by the firm fails to meet the specifications stipulated in NIT/order/Contract and the samples are rejected by the Inspecting Committee, the Department will have the right to levy a penalty at 0.1% of the total value of that particular item. 16. Bidders who will be rejected during technical scrutiny, will submit their representation within 5 days from issue of minutes of TSC. 17. Affidavit on Non Judicial Stamp Paper of Rs. 100/- duly certified by the Notary stating that the firm (name of the firm) has not been blacklisted/ debarred either in Government Departments/ Agencies in state of Haryana or Central Government Departments/ Agencies etc. as on the date of submission of the bid in the present tender. 18. Bidders should have average annual financial turnover of atleast 30% of estimated amount during the last 03 financial years, ending 31st March of previous financial year. This should be duly audited by Chartered Accountant. 19. Concession is given to Haryana based MSME’s, KVIU, Central or HPSE (as declared by industries Department Haryana) as in tender fee, EMD, Past Experience and eligibility criteria for turnover. Though they have to complete the job as per tender with warranty of 5 years or 12500 Hours which ever is earlier as per service level agreement. Only those MSME, KVIU, Central or HPSE(as declared by industries Department Haryana) will be eligible for this tender, those are authorized dealer or manufacturer of approved make of IWRD. 2 Panels be manufactured by original manufacturer either by approved brands themselves or their authorized original equipment manufacturers under their brand name. The inspection is also allowed at their channels partner’s work with the condition that all drawings / test certificates shall be from the original equipment manufacturer. System house of approved brand are not acceptable and rating IP 54 and authorization from OEM be attached if tenderer is not manufacturer

M/s KRP Engineering Pvt. Ltd.