Construction of Boundary wall in Co-ed Plus-2 School Ashram Residential School

Amount

EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I . 5.1.1/BCD

Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) 5.1.10/BCD

Providing designation 75- A, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.6.1/BCD

Providing P.C.C. M-15 with nominal mix of (1:2:4) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, , mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. 5.3.1.2/BCD

Providing R.C.C. M-20 with nominal mix of (1:1.5:3) in FOUNDATION and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including , mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. 5.3.1.1/BCD

Providing designation 75-A brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. 5.2.3/BCD

Providing designation 75-A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.2.11/BCD

Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in COLUMN with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.3.2.1/BCD

Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in BEAM with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.3.11/BCD

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, BCD 5.3.17.1

Centering and shuttering including strutting, propping etc. and removal of form for Columns,pillars. BCD 5.3.17.6

Centering and shuttering including strutting, propping etc. and removal of form for Lintel,beams. BCD 5.3.17.5

Providing T.M.T. Reinforcement FE 500 of following dia Rods as per approved design and drawing including carriage of M.S. Rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (APPROVED BRAND - TATA/ SAIL)

5.5.4/BCD 8MM DIA.

5.5.5 A/BCD 10 MM DIA.

5.5.5 B/BCD 12 MM DIA.

Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I , 5.7.3/BCD

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. 5.8.24/BCD

Providing earth work in filling in compound by carriage all complete as per direction of E/I 5.1.8/BCD

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 16.53/DSR

Supplying,fitting and fixing 40x40x4 mm IS2062 Grade A M.S. angle,hoisting, welded with 6 mm dia. And 75 mm long M.S rods,anchorage fixed in concrete steps at the time of casting including taxes all complete as per direction of E/I. 5.5.23/BCD

Supplying, fitting, and fixing 250X20X6 mm L type M.S clamp properly installed -do-- all comp. per building specification and direction of E/I. (where materials is not supplied by the deptt.) 5.5.8/BCD

Supplying,fitting and fixing M.S grill gate made of 20x6 mm M.S flats or 16 mm M.S square bars fitted on 25x25x6 mm M.S angle freames -do- all comp. 5.5.30/BCD

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning,removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) 5.8.41/BCD

Providing two coats of painting with synthetic enamel paint with one coat of primer of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. 5.8.45/BCD

Providing and applying white cement based putty of average 1 mm thickness over plastered surface to prepare the urface evn and smooth. DSR/ 13.80

Finishing walls with textured exterior paint of required shade --do-- all comp. DSR 13.45.1

Carraige of materials:-

(I)CEMENT

(II)SAND

(III)STONE CHIPS

(IV)BRICKS

Goods & Services Tax (G.S.T.) @ 18%

Labour Cess @ 1%

M/S VIKAS GOPE (BID ID -653731)

SOURISH INFRA DEVELOPERS PRIVATE LIMITED (BID ID -654242)

K & G ASSOCIATES (BID ID -653727)