SPL REPAIRS TO SINGLE JCOs LIVING ACCN (BLDG NO 10 AND 11) AT 11 GRRC UNDER GE (WEST) LUCKNOW

Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness below or above ground level complete all as specified and directed.

Demolition of brick or stone boulder masonry, built in cement mortar including all quoins, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing coat) and rubbish off the premises complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area n. exc 1.5 sqm each complete all as specified and directed.

Taking up or down steel tubing & connection 15mm bore complete all as specified and directed.

Taking up or down steel tubing & connection 20mm bore complete all as specified and directed.

Taking up or down steel tubing & connection 25mm bore complete all as specified and directed.

Refixing 15mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed.

Refixing 20mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed.

Refixing 25mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed.

M & L for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for GI tubing medium grade 25mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in CM 1:4 with water proofing compound (@ 3% by weight of cement) on fair faces of brick work or concrete surface finishing the surface even and fair complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately.)

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed .

M & L for preparation of new plastered surface of wall and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of 1mm thick wall care putty complete all as specified and directed. Note: Oil bound distemper shall be carried out through roller.

M & L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old treated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment on wall /roof projectios including facia, cornices etc by scrapping with mechanical sander (Having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean free from dust, loose paint etc by skilled labour and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls and applying two coats of Oil Bound Distemper over a coat of 1mm thick wall care putty complete all as specified and directed. Note: Oil bound distemper shall be carried out through roller.

Taking down carefully gyser with fitting and fixtures of any capacity and type and refix on same or new location complete all as specified and directed

M & L for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.

Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm stone aggregate) as in sub base complete all as specified and directed.

M & L for rendering 05mm thick in CM 1:3 on concrete surface and finishing the surface even and smooth without using extra cement as on ceiling complete all as specified and directed.

M & L for coloured glazed ceramic tiles 300 x 450 x 6-7 mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Per Point

M & L for vitrified tiles 10mm thick light shade square polished, area of each tiles n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for preparation of old wood or wood based surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L for coloured Non -Skid Ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

S & F in repair vitreous china squatting pan Orissa pattern long pan size 580 x 440mm with CI trap long neck 100mm with integral foot rest & fixing including making good floor to match complete all as specified and directed.

S & F in repairs WHB vitreous china, white, flat back, size 550x400mm incl brackets, waste coupling and waste pipe complete all as specified and directed.

S & F in repair hand shower (health faucet) with 1 m long flexible tube suitable for hot and cold water supply including wall hook, bracket etc complete set of superior quality complete all as specified and directed.

S & F in repair CP stop/angle valves 15mm bore fancy type chromium plated screwed down high pressure with quarter turn handle and wall flange complete all as specified and directed.

S & F in repair CP two-way stop/angle valves 15mm bore brass chromium plated, screwed down high pressure with castain head handle screwed both ends for iron pipes or for union complete all as specified and directed.

S & F in repair CP bib taps 15mm fancy type Chromium Plated with quarter turn handle and wall flange complete all as specified and directed.

S & F in repair 10 litres capacity PVC valve less symphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets complete all as specified and directed.

S & F in repair PVC connection pipe 15mm bore 450mm long with PTMT nuts complete all as specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for providing water proofing treatment to sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out up to 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Applying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface. (f) Filling the sunken portion with PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) up to required level complete all as specified and directed. Note :PCC filiing in Srl item no 36(f) above shall be measured and paid separately under respective item.

M & L for machine cut Kota stone slab 20-25mm thick in, skirting, dado pillar laid over 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with mixture of grey cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M & L for machine cut Kota stone slab 20-25mm thick in single piece for risers and trade of steps, laid over 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with mixture of grey cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n. exc 500 ltr capacity complete all as specified and directed.

S & F for rotational moulded three layered white coloured polyethylene water storage tank cylindrical vertical with closed top hoisted & fixed in position of capacity 500 litres complete all as specified and directed.

S & F 25mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

S & F in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe etc complete all as specified and directed.

S & F in repair shower rose with or without swivel joints of CP 125mm size including shower arm for fixing to steel pipe or union complete all as specified and directed.

M & L for vitrified tiles 10mm thick light shade squa

S & F in repair chromium plated fancy type pillar tap, swan neck with angular cock 15mm bore complete all as specified and directed.

S & F in repair 15mm bore concealed stop valves brass chromium plated long shank, with capstan head and cup screwed both ends for iron pipe or for union complete all as specified and directed.

S & F Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F Gun-metal, globe or gate valves 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.

S & F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F PVC(SWR) 110mm dia bends any radius complete all as specified and directed.

S & F in repair 100mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S & F in repair 100mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints and fixed to walls complete all as specified and directed.

M & L for Run lead joints for 75-80mm spigot and socketed pipes and fittings complete all as specified and directed.

S & F in repair 75mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S & F in repair 75mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints and fixed to walls complete all as specified and directed.

S & F cast iron bends (any radius) diminishing pieces or tapers for 100mm dia complete all as specified and as directed.

S & F 100mm bore cast iron branch piece, double (equal or unequal), ordinary or inverted (Spigot or socketed type) or with parallel branches complete all as specified and as directed.

S & F 75mm bore CI Tee, single (equal or unequal), ordinary or inverted (Spigot or socketed type) or with parallel branches complete all as specified and as directed.

M & L for 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) complete all as specified and directed.

S & F 75mm dia cast iron cowl complete all as specified and directed.

S & F 100mm dia cast iron cowl complete all as specified and directed.

S & F in repair CP brass (tubular towel rail) 20 mm dia D type aluminium anodised, 60 cm long between flange complete all as specified and directed.

M & L for Granite stone slab 18-20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixtures of pigment to match the shade of granite stone including grinding and polishing over cement screed bed 20 mm thick in CM 1:6 in window cill and jamb including rounding of exposed edges etc complete all as specified and directed.

S&F factory made PVC door frame of section 100 x 45 mm using 5 mm thick prelaminated heat moulded extruded PVC sheet of density 600 kg/Cum and core of section/frame dame solid using MS hollow rectangular tube of size 400mm x 20mm of guage 19 and PVC sheet of density 600 kg/cum. Grame fixed in position using 06 nos 8 mm dia and 100 mm long dash through bolts (anchor fastener) complete all as specified and directed.

S & F 30mm thick factory made PVC panelled door shutter consisting of Stiles/Rails made out of heat moulded 5mm thick prelaminated PVC sheet of density 600 kg/cum and MS rectangular hollow tube of 40 x 20mm of guage 19 with size of member as given below. Edges/corners of stile/rail chamfered towards panel and panel consisting of 02 Nos panel of 10mm thick (5mm + 5mm) prelaminated PVC sheet of density 600kg/cum complete all as specified and directed. Sizes of members:- (a) Stiles - 110mm x 30mm (b) Bottom /Top Rail - 135mm x 30mm (c) Lock Rail - 145mm x 30mm

M & L for machine cut Kota stone slab flooring 20-25mm thick over 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry and pointed with grey cement & pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

S & F for providing 30mm thick factory made wire mesh solid WPC door shutter consisting of Density 650 Kg/Cum manufactured by an ISO-9001-2015 certified company, door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safty purpose, (confirming as per IS : 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door shutter to be fixed to frame with 3 Nos stainless steel butt hinges of size 100mmm x 25mm x 2mm and 32mm long steel screws drilled suitable to apss through both the wall of the MS Tube. other hardwares should be fixed with 19x6 mm size steel swrews etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawings. Note : Rate of stainless steel wiremesh, XTN aluminium mesh include with quoted rate and nothing extra to be paid on this account.

S & F in repair glass corner self fancy type 250 x 250 and 5.5 mm thick fixed with brass bracket and screwed complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chawkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasternersof required dia and length complete as per the direction (MS hold fasts / lugs / SS dash fasterners shall be paid seprately.)

Demolition and breaking up 150mm dia drain pipes (salt glazed stoneware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Excavation in trenches n. exc 1.5 wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

M & L Cement concrete type D-2 (1:4:8) (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified

and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm thickness in soft / loose soil complete all as specified and directed.

Removing excavated soils to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Mild steel butt hinges shall be paid separately

M & L for PCC type B-1 (1:2:4) (20mm graded stone aggregate) as in benching and coping complete all as specified and directed.

M & L for 150mm dia Salt-glazed stone ware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M & L for 10mm dia and over TMT bar, cut to length bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M & L for Cutting chases pining in making to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exceeding 20 cm girth to brick walls etc complete all as specified and directed.

Providing & Fixing 3000 Series windows fabricated from roll formed section made of Galvanized Steel Colour coated/powder coated(Base steel as per IS 513 "D" quality, Galvanised as per IS 277 with Zinc of 120 grams/Sq.Mtr) with total coated thickness of 0.60mm coated sections should be with Primer Coat of Epoxy Primer of 5-7 micron thick, finish painted with polyester paint of 12-16mm microns thick and back coated with Alkyd backer of 5-7microns, or powder coated with pure polyester powder upto 50-60 microns thick. Section for frame should be of 98mm x 50mm, section for Mullion should be of 46mm x 70mm, section for shutter frame should be of 46mm x 46mm, section for fixed glass bead should be 18mm x 25mm and section for fly mesh shutter frame should be of 20mm x 40mm. Frame and mesh shutter sections should be cut to length and mitre joint with corner brackets made of polypropylene, glass shutter should be mitre joint with corner brackets made of CRCA electroplated Mullion Section should be jointed with frame/mullion using Nylon mullion cap Ethylpropylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter between frame and glazed shutter and both sides of fixed glass. Spoon Profile should be used around fly mesh to fix mesh in mesh shutter. Each glazed shutter should be provided with MS Power Coated Friction Hinges-1sed, High Grade Aluminium Powder coated handle -1 No, Each mesh shutter should be provided with SS Pivot Hinges -1 set, Elixir make handle shall be provided per shutter. Window frame should be fixed to brick/concrete masonary by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frames. Glass shutter & fixed glass portions should provided with a glass of 4mm plain float grass. Mesh shutter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch. Windows should be provided with grill made of 10mm sq. MS Bars welded to at 150mm center to certer, 6mm x 12mm MS flat, total grill unit should be powder coated and fixed to window frame with screws. Make:- Elixer Met Form Pvt Ltd or equivalent or as approved by concerned GE)

S & F stainless steel grill, guard bars, with ends of bars shouldered and / or riveted or forget into spikes and similar work complete all as specified and directed.

S & F anodised aluminium window and ventilator powder coated shutters top hung type without sash, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed.

S & F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts complete all as specified and directed.

S & F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

M & L for 3mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S & F Stainless Steel butt hinges 100mm size and fixed complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in plinth protection, top finished even and smooth without using extra cement including making dummy joints 10x30mm size and filling the same with mix of 1 part of bitumen and 3 parts of sand at distance not exc 2.5 m and at every turning point complete all as specified and directed.

S & F in repair looking mirror fancy type decorative pattern 5 to 6mm thick fixed on wall with stainless steel studs complete all as specified and directed.

S & F 25mm dia fancy type curtain rod made of stainless steel fancy type with brackets including all fittings etc complete all as specified and directed.

M & L for Concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8 type D-2 (40mm graded stone aggregate) for 150mm dia pipe complete all as specified and directed.

Demolition of cement concrete at any position and of any thickness including floor finish complete all as specified and directed.

M & L for obliterating number plaque and painting background using black synthetic enamel paint and building number with white synthetic enamel paint, overall area of plaque exc 0.10 sq m but not exc 0.40 sq m each complete all as specified and directed.

M & L for Precast cement concrete RCC 1:2:4 type B-1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slabs for drain / manhole cover incl demolition of RCC cover slab etc complete all as specified and directed.

EPOXY BONDING AGENT. Appplying & supply of two component solvent free epoxy bonding agent Sika Sikadur 32LP or equivalent for bonding old to new concrete . The ready to use epoxy bonding agent shall be applied over old concrete using brush after cleaning of surface of all dust or latiance.The material is supplied as a two part material in preweighed quantities for ready onsite mixing and use. The material shall exhibits the following properties Compressive strength 50 N/mm2 at 7D Flexural strenght 35N/mms at 7 D , Shear strength 10N/mm2 at 7D and Tensile strength 20 N/mm2 and Bond Strength of 10N/mm2.The new concrete shall be placed within the open time as specified by the manufacturer to ensure maximum bonding and application shall be as per the manufacturer instruction , complete all as specified and as directed by Engr-in-charge. Note: Work to be executed by the authorised applicator of manufacturer only.

M & L Providing cement concrete (1:5:10) type E-2 ( 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S & F in repair jet spray with PVC pipe of superior quality complete all as specified and directed

M & L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate and mixed with 2% integral water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement including demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. NOTE: WPC shall measured and paid seperately.

(a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Providing and applying fibre reinforced liquid applied elastomeric membrane made of Hybrid PU polymers by self priming with 30% water dilution and let it dry for 4-6hrs. Further apply 2 coats of waterproofing treatment fibre reinforced liquid applied elastomeric membrane made of hybrid PU polymers in a gap of 4-6hrs. The applied material should have specific gravity of 1.25g/cc with minimum recommended coverage of 1sqm/litre to built DFT of 650 microns. the cured membrane shall exhibit - (i) Tensile Strength ASTM D412 : 1.4-2.5 MPa) (ii) Elongation ASTM D412 : 400-500% (iii) Adhesion Strength : >2N/sqm as per ASTM D4541 (iv) Crack Bridging Ability : >3-4mm as per AS/NZS 4548:5:1999 (v) Water Permeability : NIL as per DIN 1048 (c) Providing and installing non-woven geo-textile membrane 40-50gsm with overlaps of 50mm in both directions over the Ist coat when the surface is still tacky.

re polished, area of each tiles n. exc 0.36 sqm on vertical surfaces such as skirting/dados etc over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

For rusted exposed reinforcement apply & supply of Sika Rustoff 100 or equivalent rust remover with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours.After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days including surface preparation and errection of steel props. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth, complete all as specified and as directed by Engr-in-charge Note: Work to be executed by the authorised applicator of manufacturer only. (Mode of area measurement will be chipped concrete in sqm)

Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) over roof surfaces, finished even & smooth without using extra cement complete as per manufacturer's instructions complete all as specified and directed

Each job

SURFACE PREPARATION: Prepration of existing surfaces like chipping of unsound weak / loose concrete/cover of reinforcement and removal of debries to a designated location (upto full height) block to support the structure proisionally during repair work and maintaining them in positioin till required, complete all specified and directed

Taking down carefullycopper/aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed

All as per item No 116 above but one socket outlet point 5 Amp on an independent board complete all as specified and directed

All as per item No 116 above but on the same board complete all as specified and directed

All as per item No 116 above but Call bell / buzzer point controlled by one bell push complete all as specified and directed

CORROSION RESISTANCE COATING. Providing and Application of Sika Friazinc R or equivalent as passivator/ Anti corrossion coating to the steel reinforcement shall be applied . The material shall be two component,cement based polymer modified two component coating for corrosion protection.The material shall be prepacked and ready to use. It shall be fully compatible with the reinstatement methods adopted complete all as specified and as directed by Engr-in-charge.This shall include surface preparation and errection of steel props as required for the application. Note: Work to be executed by the authorised applicator of manufacturer only. (Mode of area measurement will be chipped concrete in sqm)

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light/fan point controlled by one switch

All as item No 116 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board complete all as specified and directed

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed

S&F call bell AC single pole 240 volt Musical Type complete all as specified and directed

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed

S&F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed

S&F ceiling rose surface bakelite three terminal complete all as specified and directed

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed

Supply & fix fan regulator electronic step type for ceiling fan fixed, in existing board and connecting as directed, after dismantling and removing unserviceable regulator complete all as specified and directed

PATCH WORK FOR INSUFFICIENT CONCRETE COVER OR SOFFIT AREA OF CONCRETE. Providing and Applying Sika Monotop 122 F or equivalent ready to use single component fibre reinforced high strength polymer modified cementitious repair mortar in 25 mm thickness.Water /Powder ratio shall be as specified by manufacturer so as to achieve the following parameters:- . (a) 28 days Compressive Strength >=50N/mm2 (b) Flexural strength at 28 days >= 5 N/mm2 Note: Work to be executed by the authorised applicator of manufacturer only.

S&F sheet metal enclosure (MCB DB) single phase and neutral with 100/125 Amps rated bus bar 8 way double door type , 240 volts complete all as specified and directed

S&F MCB single pole 10 to 40 Amp 240 volts 10 KA breaking capacity complete all as specified and directed

All as per item No 121 but using 15 Amps complete all as specified and directed

S&F bell push single pole one way 5 Amp, 240 volt fuesh type as directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed .

All as per item No 131 herein before but 40 Amp, 240 volts, single pole & neutral complete all as specified and directed

S&F double door VTPN 4 way double door suitable for 4 pole MCCB 125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed. Note: MCCB & MCB to be measured and paid seprately

S&F MCCB 125 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and directed

Taking down carefully ceilling fan/exhaust fan oiling,greasing of any size and type and refix on same or new location complete all as specified and directed

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed .