TOILETS AND BATHROOM INCLUDING SUNKEN SLAB, PLUMBING AND SANITARY FITTINGS IN WING I AND V AT ARTY CENTRE UNDER GE NASIK ROAD.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed

M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately

M&L for glazed ceramic tiles coloured size 450 x 300 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed

M&L for rendering 10mm thick in CM 1:3 as in backing coat plaster on surfaces of stone masonary surfaces complete all as specifed and directed

Dismantling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed

S&F Machine cut kota stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specifed and directed

M&L for granite (of any type)work (table rubbed and polished)20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

M&L for hand cut cudappa stone slab 16 -18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete Note: screed bed layer measured seperately complete all as specifed and directed

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L for Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate as in sub base / foundation filling mass concrete complete all as specifed and directed

Taking up or down 40mm tubes galvanized iron and connections and removing/shifting from site incl cleaning for refixing where directed complete all as specifed and directed

All as per item No 14 above but 25mm

All as per item No 14 above but 20mm

All as per item No 14 above but 15mm

Re-fixing only 40mm tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

All as per item No 18 above but 25mm

All as per item No 18 above but 20mm

All as per item No 18 above but 15mm

S&F for 40mm tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

All as per item No 22 above but 25mm

All as per item No 22 above but 20mm

All as per item No 22 above but 15mm

S&F in repair cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 dia of outlet 75mm complete all as specifed and directed

S&F repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe fixed and repairs (minimum weight 90 gms) complete all as specified and directed

S&F in repairs 15 mm bib taps Chromium Plated, cast copper alloy fancy type, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. all as specified and directed

M&L for rendering 15mm thick in cement mortar(1:6) on Stone masonry surfaces or surfaces other than fair faces of brick work and finishing even and smoothcomplete all as specifed and directed

M&L for preparation of plastered surfaces of walls by washing, rubbing down,stopping and applying two coat of oil bound distemper over a coat chalk whitening primer prepatory to distemper on walls.

M&L rendering 15 mm thick cement mortar on stone surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement complete all as specifed and directed

M&L for complete removal of existing wall surfaces including preparation (i.e. brooming down on plastered / unplastered surfaces complete) and applying two coat of Acrylic weather proof exterior paint over water based primer complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of any description and applying two coats of cement base paint on walls over a coat of chalk whitening primer complete all as specified and directed

M&L for rendering 05 mm thick (1:3) on fair faces of concrete surfaces incl preparation to new surfaces on ceilings finished even and smooth without using extra cement

M&L for three coat of white wash including preparation of new surfaces on ceilings

Demolition of brick work/stone work built in cement mortar. including coping but except ashlar facing dressed stone work to precast concrete article complete all as specified and directed

M&L for Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specifed and directed

M&L for walling of random rubble uncoursed, well bonded, bedded to solidly hearted built in cm (1:6) complete all as specified and directed

M&L for brick work withfly ash bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specifed and directed

Dismantling water tanks of capacity Exc 500 Ltrs but n. exc 1000Ltrs and removing to from site or to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltr.

S&F in repairs Ball brass valves, high pressure, with polythene float and flynut for 25 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

S&F Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed

Taking down 100/75 mm dia PVC/CI sand cast soil, waste and vent pipes, in any length with or without ears etc in any position

S&F PVC (SWR) pipe single socketed 110mm bore any length with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed

All as per item No 46 above, but 75 mm dia

S&F 75mm PVC(SWR) bends

All as per item No 48 above, but 110 mm dia

S&F 75mm PVC(SWR) branch piece,single(single Y) equal or unequal

All as per item No 50 above, but 110 mm dia

S&F of PVC(SWR) vent cowl of 110mm bore

S&F in repair grating doom PTMT of 100mm dia complete all as specifed and directed

S&F in repairs Vitreous china squatting pan with PVC(SWR) 'P' trap of 125/110 mm bore,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S & F in repairs Vitreous china wash down water closet (pedestal pattern), with P trap white including plastic water closetseat, closed pattern with flat bottom , and cover and mild steel choromium plated or aluminium hinging device complete fixed.

S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs with 32mm dia flush pipe complete all as specified and directed.

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

S&F in repair vitreous china urinal half stall type white including flush pipe complete all as specifed and directed

S&F in repair stainless steel sink made of stainless steel 1mm thick with out drainage board including plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mmx330mmx160mm complete all as specifed and directed

S&F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F in repair stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed

M&L for Providing precast cement concrete louvres and jallies Type B-0 (1:2:4) in CM 1:4, 25mm thick (mea-sured solid), including all mouldings but excluding frame

M&L for special treatment to sunken portion with 10 mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat each of Nitoproof 100 & Nitopro 120 on plastered surface . Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600 mm long 20 mm dia spout light grade & 1:3:6 C2 filling , floor area of wc upto 1.5 Sqm etc complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each & removing from site

All as per item No. 65 above but exc. 1.5 Sqm and n.exc. 4.00 Sqm each.

Taking down shutters of window any description n.exc. 1.00 Sqm each removal from site by contractor at his own expense complete all as specified & directed.

S & F Solid PVC frame of size 50mm x 95mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, with necessary arragement for fixing of glass for louvers type window/ventilator and additional PVC beading around the frame for fixing of wiremesh, S & F in opening all as specified and directed by Engr-in-Charge

S&F 100 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

S&F in repairs Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat,Glazing clips,neopranes ribbin,rubber packing for fixing etc. complete all as specified and directed by Engr in Charge

S&F anodised powder coated aluminium Window shutters, sliding type without sash, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, screws and suitable locking arrangement, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge

S&F Sheet glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar, for inserting holdfast and making good dismantled portion in cement portion depth of embeded portion of 1:3 or cement concrete 1:2:4 Type B1 as required

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

all as per Item No. 79 above but from metal frame including punching or drilling out old glazing pins/springsclips and providing and fixinh new ones.

S&F Sheet glass ordinary quility 3 mm thick nexc 0.5sqm each pane and glazing with oil putty complete all as specifed and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specifed and directed

Demolition of Reinforced cement concrete above ground floors exc 15 cms thickness as in roofs,floors,beams and staircases,landings chajjas and similar suspended works(cutting of reinforcement included in the rate)

M&L for pre cast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole cover slabs set in cm 1:6 all s specified & directed

M&L for mild steel TMT bars 8mm dia cut to length bent to shape required and binding with ms wire anealed not less than 0.9mm dia, complete all as spacified and directed.

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

M&L for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.

M&L for 10mm thick plastering (screeding) in cement mortar 1:3 on concrete roof surfaces finished even and smooth without using extra cement and using Water Proofing Compound. Note : Water Proofing Compound shall be paid seperately.

Supply only intergral water proofing compound

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with bituminous paint @ 0.15kg/sqm

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS 14,309.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Srujan Associates

M/S K. K. Construction

DEVA CONSTRUCTION

SVT ENGINEERS AND CONTRACTOR.

Alpha Construction

Vishal Constructions

Abhiraj Enterprises

M/S SAMEER SUBHASH PATANI

Bidder Name

Vishal Constructions

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

Alpha Construction

Anand Trading Co

DEVA CONSTRUCTION

Srujan Associates

Abhiraj Enterprises