Renovation of Toilets in Technical block of HAL Airport

Amount

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge Nominal concrete 1:4:8 or leaner mix (i/c equivqlent design mix)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per the direction of Engineer in charge In cement mortar

Dismantling doors, windows and clerestory windows( steel or wood) shutter including chowkats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area 3 sqmetres and below

Dismantling tile work in floors and roofs laid in cement mortar includiing stacking serviceable material within 50 metres lead: For thickness of tiles 10mm to 25mm

Dismantling of flushing cistern of all types (CI/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone -III): 4 graded stone aggregate 20mm nominal size)

Providing and fixing white vitreous china pedestal type water closet (European type W C pan) with seat and lid, 10 litre low lwvwl white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: WC pan with ISI marked white solid plastic seat and lids

Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including paiting of fittings and brackets, cutting and making good the walls wherever require: White vitreous china wash basin size 630x450 mm with a single 15mm CP brass pillar taps

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floorsSingle half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete flexible pipe- 32mm dia

Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleatswith CP brass screws and washers complete

Providing and fixing toilet paper holder: CP brass

Providing and fixing unplasticised PVC connection pipe with brass unions: 45cm length 15mm nominal size

Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore

Providing and fixing CP brass bib cock of approved quality conforming to IS 8921: 15mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and laying Antiskid Tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Providing and fixing PTMT Bottle Trap for Wash basin and sink.

Providing and Fixing soil waste and Vent pipes Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 @ 100 mm dia

Providing and Fixing soil waste and Vent pipes Centrifugally cast (spun) iron socketed pipe as per IS: 3989 @75 mm dia

N M CONSTRUCTIONS

SUMAN FABRICATORS AND CONTRACTORS