Provision of Periodical Services for Mixing and Casting and Curing Groups of Facilities at Acem, Nashik

Providing and applying two or more coats of painting to old wood / steel work with synthetic enamel paint of approved shade & make including preparation of surfaces etc., at all heights.

Finishing walls with Acrylic smooth exterior paint of required shade on Old work (one or more coat applied @0.90 ltr/sqm) complete at all heights.

White washing with lime to given an even shade on Old work ( two or more coats) complete at all heights.

Finishing walls with water proofing cement paint of required shade on Old work (one or more coats @ 2.20 kg/0 sqm ) complete.

Distemper with 1 st quqlity acrylic distemper (ready mixed) having VOC (Voltage Oragnic Compound ) content less than 50 gram/ litre,of approved brand and manufacturer including applying additional coats wherever required achieve even shade and colour on Old work (One or more coats )

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre,of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour on Two coats complete at all heights.

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surfaces in three coats @ 14.35 kg/10 sqm.one coat of self priming of cementatious waterproofing polymer(dilution with water in ratio of 1:1) and two coats of cementatios waterproofing polymer (dilution with water in ratio of 3:1) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaser is visible, complete in all respect as per the direction of Enginner-in-Charge.

Filling of joints betwwen RCC plinth beam / floor slab and will panel of external, walls, toilet / bath room / wet areas walls on all floor and parapet wall over roof slab, stair case head room at the time of erection of GFRG panels with Grout RW/equivalent sealant compound after the erection of panel before the infill of concrete in panel cavities and fine finish. This applies for all horizontal and vertical joints between GFRG wall and slab panels.

Water prrofing treatment of of vertical joints (of external side and internal side) between door frame, window & ventilator frames (on all four sides ) of outer wall over the Zycosil/equivalent & Zycoprime/equivalent solution already applied (before the installation of door/window/ventilator frames in position) and fine finish with Grout RW/equivalent

Providing and injecting approved grout in proportion recommended by the manufacture into cracks/honeycomb area of concrete /masonry by suitable gun/pump.Srirrer mixed Acrylic polymer of aproved make @ 2% of weight of cement used) modified cement slurry made with non shrink compound in concrete/RCC work