Special Repair of Estate Management Unit Office Building at Bharathiyar Nagar, Avadi, Chennai.

Amount

Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved muncipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20%.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Along external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos / Lindane E.C. 20% with 1% concentration.

Treating at points of contact of wood work by chemical emulsion Chlorpyriphos / Lindane (in oil or kerosene based solution ) @ 0.5 litre per per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc, above plinth level upto floor five leve, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay Machine moulded perforated bricks of class designation 12.5 conforming to IS : 2222 in superstructure above plinth level upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) with F.P.S (non modular) bricks .

Half brick masonry with common burnt clay F.P.S (non-modular) bricks of of class designation 7.5 in foundation and plinth in: Cement mortar 1:3 (1 cement : 3 coarse sand).

Extra for providing and placing in position 2 Nos 6mm dia M.S bars at every third course of half brick masonry.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, widow sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.. Granite stone slab of all colour and texture except black, Cherry / Ruby red. Area of slab over 0.5 sqm.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on ovelapping of sheets complete ( upto any pitch in horizontal / vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm / m2.

Providing and fixing 15 cm side, 45 cm overall semi-circular plain G.S sheet gutter with iron brackets 40 x 3 mm size, bolts, nuts and washers etc. Including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/m2.

Providing and fixing on wal face unplasticised Rigid PVC rain water pipes confirming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm diameter.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) .

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams / litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5sq.meters and under, including cutting the patch in proper shape, racking out joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground within 50mtrs lead :With cement mortar 1:4(1Cement : 4Coarse sand)

Dismantling of W.C Pan of all sizes including disposal of dismantled materials incl malba all complete as per direction of Engineer-in-charge.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50meters lead . For thickness of tiles 10mm to 25mm.

Dismantling of flushing cistern of all types (C.I /PVC / Vitreous China ) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster including disposal off rubbish to the dumping ground with 50 metres lead.

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer-in-Charge.

Providing and fixing Wash basin with C.I brackets, 15 mm CP brass Pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550 x 440 mm with single 15mm C.P brass pillar tap.

Providing and fixing white vitreous china extended wall mounting water closet of size 780 x 370 x 690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing , of flush capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litres) including seat cover, and cistern fittings, nuts, bolts and gasket etc. Complete.

Providing and fixing white vitreous china battery based Infrared sensor operated urinal of approx. Size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption) having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-n-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes.

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length. 15 mm nominal bore.

Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931 . 15 mm nominal bore.

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.

Water proofing system including : Preparing the RCC slabs by carefully removing the damaged concrete portion and Grinding or Buffing the surface to remove the existing Bitumen primer to the maximum extent which may affect the bonding of water proofing coating to substrate. Coving: Coving at the junction of slab and vertical offsets with CM 1:1 mixed with Nitobond SBR latex at the dosage of 3L / bag of cement under. Bore Packing / Pipe Outlets : Preparing the inside surface of core and PVC by roughening using suitable file to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Providing necessary formwork for packing the bore using suitable arrangement (depending upon site conditions). Applying a coat of styrene- butadiene based polymer coating using Nitobond SBR Latex to enhance adhesion between the packing material and other surfaces. Packing the gap using non-shrink cement polymer-based grout using Conbextra GP2 up to the surface of the bore whilst the Nitobond SBR is in tacky state. The above analysis is based on assumption for 150 mm diameter core with 110 mm diameter PVC for 5” thick slab only. Cracks Treatment : Chasing the cracks and cut open the same in V groove and cleaning the same with Air blower & with water then it shall fill with PU Sealant / Conbextra GP2 / Conbextra EP 10 Low viscous Grout as per the substrate condition along with Cementitious Injection Grouting. Providing & application of a two-component synthetic polymer modified mortar with a elongation of 120% crack bridging ability of > 2.5 mm & a bond strength to concrete more than 1.3 Mpa called Mapelastic Smart in two coat. The coating shall be carried out in two coats @ a coverage of 1.5 Kg/sqm/coat. The two coats shall be in opposite directions to each other with a brush or a roller. The area once coated shall be ready to take the protection screed on the horizontal surface and plaster on the vertical surface . 120% Elongation Crack Bridging ability of > 2.5 mm including supplying and application of Geotextile of 120 GSM over the coated area for protection layer.

Providing and laying damp-proof course 80mm thick with cement concrete 1:2:4 (1 cement : 2 Coarse Sand (Zone -III) derived from naturaal source : 4 Graded stone aggregate 12.5 mm nominal size deerived from natural source).

Providing and fixing build in document storage cupboard / storage units with 18 mm commercial plywood of approved brand (Century, Greenply, Duro) 400 mm deep and 1 mm thick laminated outside and 0.5 mm thickness inside with horizontal partitions at spacing of 400 mm with doors and all required hardware etc complete as per direction of Engineer-in-Charge.

Providing and fixed partitions for work station with 12 mm plywood on both sides with internal frame work and 1 mm laminated outside of overall thickness 4 inch with partially glazed section including necessary hardware and including detachable working platform.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.30 kg/sqm including grouting the joints with white cement and matching pigments etc. Complete (Double Charge). Size of Tile 600 x 600 mm.

SANGEETA ENGINEERS

CHARAN ELECTRICALS

SMS ASSOCIATES

VISION ASSOCIATES

Sri SaiMaharaja Electricals