Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.4 LAccepted-AOC C O S 1 ESS GEE COMPLEX NEAR J K BANK SONAWAR BAZAR B B CANTT SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L-1 | Accepted-AOC Being L-1. | |
| 2 | L-2₹28.6 L+₹3.9 L (15.7%)Rejected-Finance BALSOO KULGAM ANANTHNAG JAMMU KASHMIR 192232 UDYAM JK 11 0004326 | KULGAM | JAMMU AND KASHMIR | 192232 | L-2 | Rejected-Finance Not being L-1. | |
| 3 | L-3₹28.7 L+₹4.0 L (16.1%)Rejected-Finance R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L-3 | Rejected-Finance Not being L-1. | |
| 4 | L-4₹29.0 L+₹4.3 L (17.3%)Rejected-Finance | L-4 | Rejected-Finance Not being L-1. | |
| 5 | L-5₹33.4 L+₹8.7 L (35.2%)Rejected-Finance | L-5 | Rejected-Finance Not being L-1. |
| Sl No | Description | Qty | Unit | M/S SHEIKH FEROOZ AHMAD L3 | M/S SHEIKH CONSTRUCTION CO L2 | Peerzada And Sons L7 | JANDOO AND CO L5 | Asian Marketing Co L6 | M/s AMIR MAQBOOL L4 | M/S A.N CONSTRUCTIONs L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. | 792 | Sqm | 5 ₹3,960 | 2 ₹1,584 Lowest | 15 ₹11,880 | 15 ₹11,880 | 15 ₹11,880 | 2 ₹1,584 Lowest | 10 ₹7,920 |
| 2.00 | M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) as in floor for levelling course complete all as specified and directed by Egineer-in-Charge. | 742 | Sqm | 70 ₹51,940 | 150 ₹1,11,300 | 125 ₹92,750 | 100 ₹74,200 | 310 ₹2,30,020 | 70 ₹51,940 | 40 ₹29,680 Lowest |
| 3.00 | M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick with cement mortar 1:4 and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. | 30 | Sqm | 800 ₹24,000 Lowest | 800 ₹24,000 Lowest | 950 ₹28,500 | 1,000 ₹30,000 | 830 ₹24,900 | 800 ₹24,000 Lowest | 800 ₹24,000 Lowest |
| 4.00 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.18 sqm and not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer cement mortar 1:6 for laying finishes complete all as specified and directed by Engineer-in-Charge. | 438 | Sqm | 1,345 ₹5,89,110 | 1,000 ₹4,38,000 | 980 ₹4,29,240 | 1,130 ₹4,94,940 | 950 ₹4,16,100 Lowest | 1,100 ₹4,81,800 | 950 ₹4,16,100 Lowest |
| 5.00 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. | 217 | Sqm | 780 ₹1,69,260 Lowest | 800 ₹1,73,600 | 960 ₹2,08,320 | 1,000 ₹2,17,000 | 825 ₹1,79,025 | 800 ₹1,73,600 | 900 ₹1,95,300 |
| 6.00 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over and including 10mm thick rendering with cement mortar 1:4 and pointed in white or colour cement to match the colour of tiles complete all as specified and directed by Engineer-in-Charge. | 50 | Sqm | 740 ₹37,000 Lowest | 800 ₹40,000 | 985 ₹49,250 | 1,100 ₹55,000 | 825 ₹41,250 | 780 ₹39,000 | 850 ₹42,500 |
| 7.00 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15mm thick screed bed of cement mortar (1:6) including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. | 30 | Sqm | 1,700 ₹51,000 | 1,300 ₹39,000 | 980 ₹29,400 Lowest | 1,400 ₹42,000 | 1,200 ₹36,000 | 1,400 ₹42,000 | 1,000 ₹30,000 |
| 8.00 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge. | 404 | Sqm | 2 ₹808 | 2 ₹808 | 22 ₹8,888 | 5 ₹2,020 | 20 ₹8,080 | 1 ₹404 Lowest | 10 ₹4,040 |
| 9.00 | M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed by Engineer-in-Charge. | 140 | Sqm | 500 ₹70,000 | 500 ₹70,000 | 1,404 ₹1,96,560 | 580 ₹81,200 | 470 ₹65,800 | 450 ₹63,000 Lowest | 500 ₹70,000 |
| 10.00 | M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with nails to timber frame complete all as specified and directed by Engineer-in-Charge. | 220 | Sqm | 500 ₹1,10,000 | 500 ₹1,10,000 | 1,390 ₹3,05,800 | 600 ₹1,32,000 | 470 ₹1,03,400 | 450 ₹99,000 Lowest | 500 ₹1,10,000 |
Tender Value
₹38.0 L
EMD Value
₹75,940
Closing Date
11 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
BR AND EM REPAIR TO CERTAIN BUILDINGS IN BALAPUR GARRISON AND CERTAIN ALLIED UNITS IN AGE BR P AREA UNDER GE 861 EWS
2025_MES_713447_1
GE 861 EWS-21 (T)/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE 861 EWS
As per Tender Documents
7 documents required · 7 mandatory
₹500
Yes
GE 861 EWS
₹75,940
Yes
29 Sept 2025
10 Jun 2025
18 Jul 2025
10 Jun 2025
11 Jul 2025
24 Jun 2025
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) as in floor for levelling course complete all as specified and directed by Egineer-in-Charge.
M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick with cement mortar 1:4 and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.18 sqm and not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer cement mortar 1:6 for laying finishes complete all as specified and directed by Engineer-in-Charge.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over and including 10mm thick rendering with cement mortar 1:4 and pointed in white or colour cement to match the colour of tiles complete all as specified and directed by Engineer-in-Charge.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15mm thick screed bed of cement mortar (1:6) including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.
M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed by Engineer-in-Charge.
M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with nails to timber frame complete all as specified and directed by Engineer-in-Charge.
S&F solid PVC wall linning consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-Charge.
Dismantling of timber scantling in framed work under 40 Sqcm, in fillet, rails, posts, rafters, purlin etc. complete all as specified and directed by Engineer-in-Charge.
M&L Clean sawn Second class soft-wood in scantlings in framed work complete all as specified and directed by Engineer-in-Charge.
S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exc 6 Sqcm and n exc 13 Sqcm bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.
S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails n exc 6 Sqcm bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.
Demolition of Concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
M&L for 100mm thick cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in sub base for floor finishes complete all as specified and directed by Engineer-in-Charge.
M&L for 50mm thick cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed by Engineer-in-Charge.
M&L for glossy finished chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments, laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
M&L for Machine pressed precast conctete interlocking paver block (shape as per sample in AGE B/R (P) sample room), with grey cement and no pigment and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed by Engineer-in-Charge.
M&L for sand filling under floors including watering and consolidation complete all as specified and directed by Engineer-in-Charge.
M&L PCC 1:2:4 type B-0 (using 12.5 mm garded crushed stone aggregate) as in copings including necessary form work, complete all as specified and directed by Engineer-in-Charge.
M&L for 40mm thick cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in floor finishes complete all as specified and directed by Engineer-in-Charge.
Taking down cement or cement lime rendering / plastering on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer-In-Charge.
Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed by Engineer-in-Charge.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15mm thick in CM 1:4 using liquid water proofing compound as per manufacturer's instruction on fair faces of brick work or concrete surfaces of wall complete all as specified and directed by Engineer-in-Charge.
Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.
M&L for two coats synthetic enamel paint over old steel surfaces including preparation of surfaces over 10 cm width or girth complete all as specified and directed by Engineer-in-Charge.
Taking down Chowkhats or frames n exc 1.5 sqm. each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-In-Charge.
S&F Anodised aluminium window and ventilator shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws etc. complete all as specified and directed by Engineer-in-Charge.
S&F Anodised aluminium frame for doors, windows, ventilstors with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.
S&F 5.0 to 5.5 mm thick sheet glass plain or tinted in panel for aluminium windows, doors, partitions etc. with glazing clips, rubber beading solar control film 25 micron reflective type complete all as specified and directed by Engineer-in-Charge.
S&F in replacement Bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
S&F in replacement 20mm dia Bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-In-Charge.
S&F in repairs vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing, 32 mm waste coupling, waste pipe etc. complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long scrwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC valve less 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-Charge.
S&F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engineer-In-Charge.
S&F in repair PVC waste pipe 600mm long for wash basin, sink and urinal etc. complete all as specified and directed by Engineer-in-charge.
Dismantling water tanks exc 250 Ltrs and n exc 500 Ltrs and removing from site complete all as specified and directed by Engineer-in-charge.
S&F Rotational moulded polyethylene, 500 ltrs water storage tanks (cylindrical vertical with closed top) 3 layer, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-charge.
Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floor to match with existing and removing from site complete all as specified and directed by Engineer-in-charge.
M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr-in-Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.
Description all as per srl item No-45 here in above but for one 3 pin 5A socket outlet independent board controlled by one switch complete all as specified and directed by Engineer-in-charge.
Description all as per srl item No-45 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed by Engineer-in-charge.
Description all as per srl item No 45 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed by Engineer-in-charge.
S&F in replacement switch piano flush type, 05 / 06 Amps single pole, one way 230 volts complete all as specified and directed by Engineer-in-charge.
S&F in replacement switch piano flush type, 15 / 16 Amps single pole, one way 230 volts complete all as specified and directed by Engineer-in-charge.
S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed by Engineer-in-charge.
S&F in replacement Switch socket combination 2 in 1, 3 pin, 15 Amp flush type complete all as specified and directed by Engineer-in-charge.
S&F in replacement switch socket combination 5/6 amps 5 pin flush type, 230 volts with box complete all as specified and directed by Engineer-in-charge.
S&F in replacement switch socket combination 15/16 amps 5 pin flush type, 230 volts with box complete all as specified and directed by Engineer-in-charge.
S&F in replacement stepped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified and directed by Engineer-in-charge.
S&F in replacement lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed by Engineer-in-charge.
S&F in replacement of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed by Engineer-in-charge.
S&F in repacement decorative ultra slim linear LED 18 Watt 4' long warm/White colour lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up two core copper flexible wire from ceiling rose to fittings complete all as specified and directed by Engineer-in-charge.
S&F in replacement LED Lamp 9 W complete all as specified and directed by Engineer-in-charge.
S&F in replacement LED Ceiling light 12W recessed munting including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge.
S&F in repacement sheet metal enclosure double door, SPN (single pole and neutral), AC, 230 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing surfaces complete all as specified and directed by Engineer-in-charge.
S&F in repacement sheet metal enclosure double door, single pole and neutral, AC, 230 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing surfaces complete all as specified and directed by Engineer-in-charge.
S&F in repacement MCB, SP, AC, 230 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed by Engineer-in-charge.
S&F in repacement MCB, SP, AC, 240 volts "B" series capacity of 63 Amps, 10kA and making connections complete all as specified and directed by Engineer-in-charge.
S&F in repacement MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified and directed by Engineer-in-charge.
S&F in replacement including taking down old unserviceable 1100 volt grade Flexible wire two core copper conductor 0.75 sq mm complete all as specified and directed by Engineer-in-charge.
S&F in replacement including taking down (3 runs) old unserviceable 1100 volt grade copper conductor cable single core 1.5 sq mm all as specified and directed. Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 1.5 Sqmm and one run of 1.5 Sqmm PVC insulated copper conductor single core, one run of PVC conduit shall be measured as single run) complete all as specified and directed by Engineer-in-charge.
All as per srl item No 67 above but 3 runs of 2.5 Sqmm size conductor and ditto complete all as specified and directed by Engineer-in-charge.
All as per srl item No 67 above but 3 runs of 4 Sqmm size conductor and ditto complete all as specified and directed by Engineer-in-charge.
S&F in replacement passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 2 core nominal cross section in service connections complete all as specified and directed by Engineer-in-charge.
All as per srl item No 70 above but size 4 Sqmm 2 core complete all as specified and directed by Engineer-in-charge.
All as per srl item No 70 above but size 16 Sqmm 2 core complete all as specified and directed by Engineer-in-charge.
S & F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5 core complete all as specified and directed by Engineer-in-charge.
S&F in replacement including taking down old unserviceable 1100 volt grade copper conductor cable Three core 2.5 sq mm complete all as specified and directed by Engineer-in-charge.
All as per srl item No 74 above but size 6 Sqmm 2 core complete all as specified and directed by Engineer-in-charge.
S&F in replacement Plug top 5/6A complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement Plug top 15/16 A complete all as specified and directed by Engineer-in-charge.
S&F in replacement casing capping 20 mm complete all as specified and directed by Engineer-in-charge.
S&F in replacement casing capping 25 mm complete all as specified and directed by Engineer-in-charge.
S&F 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.
S&F in replacement LED security light fitting 50 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-charge.
S&F in repalcement Connecting & testing Changeover switch 3 Phase 415V on load of rating 150 AMPS and including sheet enclouser complete all as specified and directed by Engineer-in-charge.
Supply and Fixing exhaust fan 250 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engineer-in-charge.
Supply and Fixing exhaust fan 1200 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engineer-in-charge.
Supply & Fixing of BLDC ceiling fan 1200 mm sweep, copper winding, double ball bearing with aluminium blade set of 3, length of down rod not less then 300 mm, single phase , 240 volts ISI marked , incuding connection with three core copper wire etc complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engineer-in-charge.
M/S SHEIKH CONSTRUCTION CO (BID ID -3341891)
M/S SHEIKH FEROOZ AHMAD (BID ID -3355531)
M/s AMIR MAQBOOL (BID ID -3335962)
JANDOO AND CO (BID ID -3353150)
Asian Marketing Co (BID ID -3355362)
Peerzada And Sons (BID ID -3342732)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .