Maintenance work at Balaji library in ward no. 99

Amount

Picking the existing cement plaster surface the chipping materials clearing away from the site and cleaning etc., complete

Plastering with cement mortar (1:3) 20 mm thick in all floors including cost and conveyance of all materials to site and labour charges etc., complete complying with standard specifications.

Weathering Course with Concrete Broken Brick (S.I.No.278)&(P&D)Data54. Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab, the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.

Finishing the top of roof with one course of machine pressed tiles of size 200mmx200mmx20mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supply and Delivery Fabrication of MS Doors with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated Single Core unsheathed Copper Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with Module GI switch box in flush with wall with 6A one way module switch front plate continuous earth connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC light / Fan Point (For electronic regulator) (6 Points Per Coil) SD -314

Supply and fixing of single box type (philips / Havells / Eq) suitable for 4 feet 20W LED tube light with TW round blocks on wall or ceiling with 20W LED tube light with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of 48W LED Street Light Fitting LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) Higher End Philips / Havells / Equivalent etc., complete

Painting old wall surface with Two coat of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soap soda and water by manual labour.

Painting with Ready Mixed Enamel Paint over the Old Iron Work of approved quality and colour with priming coat including the cost of all materials etc., complete in all floors

Add GST 18%

N NALLATHAMBI (BID ID -1301624)