Repair/replacement of worn out parts of 5cusec x 10m head pump of unit-3 along with allied works at LIS Kukerian

Repair/replacement of worn out parts of 5cusec x 10m head pump of unit-3 along with allied works at LIS Kukerian.

Decoupling of 5cusec x 10m head horizontal casing pump of unit no.3 from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 5cusec pump set by using manual labour, head load to the nearest roadside, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5 cusec horizontal casing pump set at workshop by way of dismantling and extraction of damaged internal parts. Repairs to the pump shaft by way of remetalling, turning, rethreading & finishing to accurate size as per specifications of damaged pump shaft. Job includes repairs to impeller by way of remetalling, machining, brazing, turning and finishing to accurate size including making of new key way of the same specifications. Providing and fitting of 2no.s new bearings on driving and non driving end of the pump as per sample, 2no.s neck rings, 2no.s shaft protection sleeves, new check nut, bushes, new gland studs and applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement. Repair to the bearing housing on driving and non-driving ends of pumping unit by turning and fitting of bush to make inner dia. of bearing housing suitable for fitment of bearings. Complete assembling of pump set after carrying out necessary repairs. Shifting back to the LIS Kukerian after carrying out necessary repairs at workshop and then fitting/reinstallation at the base frame, coupling with the motor by making proper alignment and testing on partial/full load. Job also includes providing and fitting of new coupling nuts/bolts & rubber bushes. Complete job includes cost of material and labour charges.

Rebate on Old Parts

BEE AAR ENTERPRISES

M/S TRIKUTA ELECTRICAL & MECHANICAL WORKS

GS ENGG WORKS