REPAIR / MAINT OF STAND BY DG SETS, AMF PANEL IN DOMESTIC AND TECHNICAL AREA AND REPAIR / REPLACEMENT OF CEILING FANS, EXHAUST FANS, WALL FANS, AND GEYSER AT AF STN BARNALA UNDER GE (AF) HALWARA

Amount

Material and labour for carrying out 'B'- check of 100 KVA generator set of make Mahindra/Kirloskar once in a period of three months by authorized / OEM including replacement of Engine oil, oil filter, fuel filter "O" ring, tappet valve, adjustment replacing the tappet gasket, water leakage rectification and testing commissioning recommended by OEM for smooth running, complete all as specified and as directed. Notes : (i) Engine oil, fuel filter and oil filter shall be measured and paid separately under relevant items.

All as per item No. 1 above but of 75 KVA DG set.

All as per item No. 1 above but of 62.5/63 KVA DG set.

All as per item No. 1 above but of 45 KVA DG set of make Mahindra.

All as per item No. 1 above but of 30 KVA DG set of make Mahindra .

All as per item No. 1 above but of 10 KVA DG set of make Mahindra

Dismantling and taking out blocked / choked radiator assembly up to 63 KVA DG Set including dismantling of rubber hose, fan blade and V belt etc feeding the high pressure air mixed with water alternatively and applying cleaning chemical on the surfaces of radiator and cleaning thoroughly, brazing work for leakage and refixing the same in position complete all as specified and as directed.

All as per srl item No 7 above but 75 KVA to 100 KVA

Dismantling and taking out self starter assembly suitable for 100 KVA DG Set and including replacement of spare parts like field coil, armature assembly, solenoid assembly, carbon brush, carbon brush assembly, clutch plate assembly and bushes including servicing and refixing to engine complete all as specified.

All as per srl item No 9 above but 63 KVA to 75 KVA

All as per srl item No 9 above but 10 KVA to 45 KVA

Dismantling and taking out battery charging alternater assembly suitable for 100 KVA DG Set and including replacement of wornout spare parts like field coil, rotor assembly, carbon brush, rectifier assembly and bushes etc including servicing and refixing complete all as specified.

All as per srl item No 12 above but 62.5 KVA to 75 KVA.

All as per srl item No 12 above but 10 KVA to 45 KVA.

Dismantling and taking out fuel injector pump assembly suitable for 100 KVA DG Set and complete overhauling of FIP including including replacement of unserviceable parts like rebuild overhauling kit, rebuild seal kit, fuel injector 'O' rings, OEM gaskets, spring gasket injector, valve bearing etc complete all as specified and directed.

All as per srl item No 15 above but 75 KVA.

All as per srl item No 15 above but 62.5/63 KVA.

All as per srl item No 15 above but 10 KVA to 45 KVA

Supply and fixing in replacement Self starter assembly 12 Volt suitable for 75 KVA to 100 KVA DG Set as per existing make of DG Set, complete all as Specified and directed.

All as per srl item No 19 above but 10 KVA to 63 KVA.

Supply and fixing in replacement of main radiator and fan belt for 100 KVA DG Set as per existing specification and make complete all as Specified.

All as per srl item No 21 above but 75 KVA DG Set.

All as per srl item No 21 above but 10 KVA to 63 KVA DG SET.

Supply and fixing in replacement of V belt for alternator for 100 KVA DG Set as per existing specification and make complete all as specified.

All as per srl item No 24 above but for 75 KVA DG Set.

All as per srl item No 24 above but for 10 KVA to 63 KVA DG Set.

Supply and fixing in replacement Fuel pipe (7.5, 14x14B, 700 PB), complete all as specified and directed.

Supply and fixing in replacement overflow/return Fuel pipe for 100 KVA DG Set as per existing make and size , complete all as specified and directed.

All as per srl itlem No 28 above but 75 KVA DG Set.

All as per srl itlem No 28 above but 10 KVA to 63 KVA DG Set.

Supply and fixing in replacement Silencer alongwith clamps for DG Set 62.5 KVA of Kirloskar Green Make, complete all as specified and directed.

Supply and fixing in replacement Rubber hose for air intake as per existing Size for DG Set 75 KVA, complete all as specified and directed.

All as per srl item No 32 above but 100 KVA DG Set.

Supply and fixing in replacement Rubber hose's set for coolant circulation from radiator to water body as per existing Size for DG Set 75 KVA, complete all as specified and directed.

Supply and pouring engine oil 15W40 for DG Set, complete all as specified and directed.

Supply and pouring Genuine coolant premix in 5 Ltr Packing, complete all as specified and directed.

Supply and fixing Fuel filter Set for 10 KVA Kirloskar Make DG Se, complete all as specified and directed.

All as per srl item No 37 above but 30 KVA Mahindra Make DG Set.

All as per srl item No 37 above but 45 KVA Mahindra Make DG Set.

All as per srl item No 37 above but 62.5 KVA Kirloskar Make DG Set .

All as per srl item No 37 above but 62.5 KVA Mahindra Make DG Set.

All as per srl item No 37 above but 75 KVA Kirloskar Make DG Set.

All as per srl item No 37 above but 100 KVA Kirloskar Make DG Set

All as per srl item No 37 above but 100 KVA Mahindra Make DG Set

Supply and fixing in replacement Lub oil filter element suitable for up to 45 KVA DG Set as per existing make and Size, complete all as specified and directed.

All as per srl item No 45 above but 63 to 75 KVA DG set.

All as per srl item No 45 above but 100 KVA DG set.

Supply and fixing in replacement air filter element suitable for up to 45 KVA DG Set, complete all as specified and directed.

All as per srl item No 48 above but 63 KVA to 75 KVA DG Set.

All as per srl item No 48 above but 100 KVA DG Set.

Supply and fixing in replacement stop solenoid 12V 10 Amps single coil 75mm dia, complete all as specified and directed.

Supply and fixing in replacement fuel pump mounted stop solenoid complete assembly for 63 KVA Kirloskar engine, complete all as specified and directed.

All as per srl item No 52 above but 100 KVA DG Set.

Supply and fixing in replacement generator control unit for 63 KVA Kirloskar Make DG set complete all as specified.

All as per srl item No 54 above but 75 KVA DG Set.

Supply and fixing in replacement Kirloskar green/Mahindra AVR for alternator suitable upto 45 KVA DG Set, complete all as specified and directed.

All as per srl item No 56 above but 63 KVA DG Set.

All as per srl item No 56 above but 75 KVA DG Set.

All as per srl item No 56 above but 100 KVA DG Set.

Supply and fixing in replacement 4-20mA lube oil pressure sensor gems make 3100 series for 63 KVA DG Set of Kirloskar Make, complete all as specified and directed.

Supply and fixing in replacement Fuel level sensor for 10 KVA DG Set of Kirloskar Make, complete all as specified and directed.

Supply and fixing in replacement Fuel level sensor for 63 KVA DG Set of Kirloskar Make, complete all as specified and directed.

Supply and fixing in replacement Thermostat element (74 Deg) WTIL No.DEV358 cat part No - 39.040.09.0.00, complete all as specified and directed.

Supply and fixing in replacement water Pump assembly assembly for 100 KVA Kirloskar/Mahindra engine, complete all as specified and directed.

All as per srl item No 64 above but 75 KVA DG Set.

All as per srl item No 64 above but upto 63 KVA DG Set.

Dismantling of existing defective Alternator any capacity (upto 100 KVA) any make from the foundation, disconnecting the electric connection, coupling pulley, and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with super enamelled solid copper conductor ( winding wire)of existing size and make complete including varnishing, drying, ovening, overhauling, greasing and fixing in the same position, making necessary electric connection and testing of Alternator, complete all as specified and as directed. Note :- Transportation from site to workshop and back shall deemed to be included in quoted rate by contractor.

Supply and fixing in replacement Battery 12V,150 AH sealed lead acid battery, complete all as specified and as directed.

Supply and fixing in replacement Battery 12V,90 AH sealed lead acid battery, complete all as specified and as directed.

Supply Only Battery Lead 0.5 mtr long, complete all as specified and as directed.

Supply Only Brass Battery terminal as per sample, complete all as specified and as directed.

Material and labour in repair of AMF panel by checking and replacing defective relays, timers, single phase preventer, power contactor including panel control wiring with suitable size wire in AMF panel including complete servicing, complete all as specified and as directed. Note:- Relays, timers, contactors single phasing preventor will be measured and paid for separately under relevent items as 'Supply only'.

Supply only KRB relay card 8 way 20 pin (PCB = relay card - 8 ATS - 12 V DC), complete all as specified and as directed.

Supply only ATS relay card 8 way 20 pin (PCB = relay card - 8 KRB - 12 V DC), complete all as specified and as directed.

Supply only contactor relay Unit of suitable DG Set 24 Volt DC, complete all as specified and as directed.

Supply only contactor relay 9/8 pin with base12 Volt DC , complete all as specified and as directed.

Supply only timer relay ,relay assembly 220 Volt, 6 Terminals, complete all as specified and as directed.

Supply only 95 amps 3 pole power contactor alogwith accessories suitable for DG Set AMF panel, complete all as specified and as directed.

Supply only single phasing preventor (VMR), complete all as specified and as directed.

Material and labour for drain out the diesel from the diesel tank thoroughly to clean the dirt/sedimentation in the tank , refilling the diesel to the tank and writing DOC in whte colour letters with synthetic enamel paint on gen set canopy, complete all as specified and directed:- Note: Container for drain out and refilling of DHPP to be provided by the contractor and quoted rate is deemed to be included in the same.

Material and labour for Painting of trolly of 62.5 KVA DG set and preparing the surfaces by removing of old paint make the surface smooth for repainting, painting of trolly with two coat of synthetic enamel paint over a coat of red oxide primer and carried out repair work in leaf spring as re-tention and welding work in rotating tie bar mechanism, complete all as specified and directed.

Material and labour for Painting of canopy of 62.5 KVA DG set and preparing the surfaces removing of old paint make the surface smooth for repainting, painting of trolly with two coat of synthetic enamel paint over a coat of red oxide primer and carried out repair work in leaf spring as re-tention and welding work in rotating tie bar mechanism, complete all as specified and directed.

All as per srl item No 82 above but 75 KVA DG Sets.

All as per srl item No 82 above but 100 KVA DG Sets.

Material and labour for repairing of DG set's canopy gates with welding work for replacment of broken hinges and repair of U/S locks, complete all as specified and as directed.

Material and labour for dismentling/opening/testing of 3 Ton Gantery crane make Rockwell and checking and replacement of unserviceable parts of the Crane at site including re-assembling, greasing & carried out load test for smooth functioning of crane etc, complete all as specified and directed.

Disconnecting and taking out of DG set 75 KVA Make :- kirlosker No of Cylinder :- 06 including disconnecting all electrical connections and transporation to work shop and back after carry out necessary repair and replacement of worn out / unserviceable defective parts including preventive maintaince of connected assemblies. Reassembling the same after repairs including testing and commissioning at site complete. Note :- cost of spare parts to be replaced will be masured and paid seperatly under respecive items as 'Supply only'.

Supply only cylinder Liner, complete all as specified and as directed.

Supply only Piston, complete all as specified and as directed.

Supply only Piston ring set, complete all as specified and as directed.

Supply only exaust valve seat, complete all as specified and as directed.

Supply only inlet Valve seat, complete all as specified and as directed.

Supply only valve pair, complete all as specified and as directed.

Supply only Hose flexible, complete all as specified and as directed.

Supply only CAM gear Assembly, complete all as specified and as directed.

Supply only turbo charger Assembly, complete all as specified and as directed.

Taking down carefully ceiling fan / exhaust fan/wall mounted fan of any sweep with frame and wire from ceiling end and checking for unsv parts of the fan at site or at MES Yard including re-assembling & testing for smooth functioning etc, complete all as specified and as directed. Note :- Unserviceble parts will be measured and paid separately under relevant items as 'Supply only'.

Material and labour for rewinding of ceiling fan 1200 mm sweep with super enamelled copper winding wire of existing size and make and guage including insulating material varnishing, drying, baking,after Opening up and cleaning the rotor bearing and bushes by K oil and providing fresh grease to all bearing and bushes complete including re-assembling & testing for smooth functioning etc, complete all as specified and adirected. Note :- Fixing of same is included in quoted rate of this item.

All as per srl item No 98 here in before but 1400 mm sweep ceiling fan.

Material and labour for rewinding to exhaust fan 300/450 mm sweep with super enamelled copper winding wire with adequate size and guage including insulation material, varnishing, drying baking, assembling materials after Opening up and cleaning the rotor bearing and bushes by K oil and providing fresh grease and bushes complete including re-assembling & testing for smooth functioning etc, complete all as specified and directed. Note : (i) Fan rewinding and repair work shall be done at MES yard only, no items shall be issued to take outside for repair . (ii) Spare parts shall be measured and paid serparately as 'Supply only' but tunder relevent items.

Material and labour for rewinding to Pedestal fan 600/750mm sweep with super enamelled copper winding wire with existing size, make and guage including insulation material, varnishing, drying baking, assembling materials after Opening up and cleaning the rotor bearing and bushes by K oil and providing fresh grease and bushes complete including re-assembling & testing for smooth functioning etc, complete all all as specified and directed.

Supply only ball bearing of ceiling fan 1200 mm / 1400mm / exhaust fan/wall mounting fan etc as per existing size, complete all as specified and directed.

Supply only capacitor 415 Volts, 50 Hz 3.15 MFD, ISI marked, complete all as specified and as directed.

Supply only gun metal bush suitable for ceiling / exhaust fan /Wall fan any sweep, ISI marked, complete all as specified and as directed.

Supply only rubber reel with clamps, nut bolts, washers and split pin of suitable size, ISI marked, complete all as specified and as directed.

Supply only bottom and upper plastic canopy complete with screws suitables for ceiling fan 1200 / 1400 mm sweep, complete all as specified and as directed.

Material and labour for one coat of spray Painting of ceiling fans 1200/1400 mm sweep fan to make it good including preparation & cleaning of surface and writing the MES number with black paint on fans in situ with synthetic enamel paint by spraying including filling cavities with filler, complete all as specified and as directed.

Supply only armature shaft of ceiling fan any capacity, ISI marked, complete all as specified and as directed.

Supply only wall fan mounting clamp with connect nut bolt wahsers, complete all as specified as directed.

Supply only light grade down MS rod for ceiling fan size 45 cm length with connected nut bolt washer, complete all as specifed and directed.

Supply only wall fan blade guard any size suitable as per requirement, complete all as specified and as directed.

Supply only MS blades suitable of any size for wall fans & Exhaust fan, complete all as specified and as directed.

Supply only MS blades alongwith suitable size of nuts for fixing properly in ceiling fans of any type any size, complete all as specified and as directed.

Supply only Exhaust fan mounting MS legs and clamp any size any type suitable for as per site requirement with connected nut, bolts, washers, including grouting work, complete all as specified and as directed.

Supply and fixing in repair MS louver shutter for exhaust fan any size any type, complete all as specified and as directed.

Supply only plug top 15 A, 3 pin suitable, complete all as per specified and directed.

Supply only plug top 5 A, 3 pin suitable, complete all as per spefied and directed.

S&F in replacement switch socket Box Type combination outlet, 5 Amps 2 in 1 ,multipurpose 3 pin, 5/15 Amps, flush type having four holes for fixing, complete all as specified and directed.

S&F in replacement switch socket Box Type combination outlet, 15 Amps 2 in 1 ,multipurpose 3 pin, 5/15 Amps, flush type having four holes for fixing, complete all as specified and directed.

Taking down carefully water geyser/solar geyser any capacity, cable sealing end and dismantling of heating element, thermostat etc and refixing after repairs, connecting up and testing for satisfactory heating of water complete all as specified and as directed. Note :- Spare parts shall be measured and paid serparately as 'Supply only'.

Supply only 1500 watts tri angle type heating element same as of existing shape and size, complete all as specified & directed.

Supply only 2000 watts tri angle type heating element same as of existing shape and size, complete all as specified & directed.

Supply only PMW - Cup Type Heating Element - 3000 Compatible for Geyser(1 Litre - 5 litres) Instant & Portable Geysers same as of existing shape and size, complete all as specified & directed.

Supply only solar geyser heating element of 3000 watts diagonal and thread type heating element same as of existing shape and size, complete all as specified & directed.

Supply only of Thermostate 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout, complete all as specified & as directed.

Supply only geyser inner assembly triangle type suitable for 25/50 Ltr, complete all as specified & as directed.

Material and labour for refixing of displaced solar plate by using angle iron stand, nut bolts washer,water connections and made it to be functional, complete all as specified & as directed.

Material and labour for Gas welding work for geyser brackets/inner tanks, complete all as specified & as directed.

Material and labour in Replacement of broken and rusted geyser bottom plate of capacity 25 litre with indicator lamp green and red LED, complete all as specified & as directed.

Material and labour in replacement of broken and rusted geyser bottom plate of capacity 50 litre with indicating lamp green and red LED, complete all as specified & as directed.

Material and labour for Replacement of Hot & Cold Water Geyser Connection Pipe SS 304 Grade 15 mm Size with SS nuts of length 750 mm, complete all as specified & as directed.

Supply only L hook fastener size 10 mm dia and 10 cm long with connected washers fising on wall for hanging of geyser, complete all as specified & as directed.

Supply and fix in repairs Stop valve/angle cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bore 15mm fixed, complete all as specified and as directed.

Supply only flexible 20 mm bore PVC coduit with fixing clamp size of 20 mm bore, complete all as specified & as directed.

Supply and fixing in replacement geyser inner tank copper body of 25 Ltrs capacity, complete all as specified & as directed.

Supply and fixing in replacement geyser inner tank copper body of 50 Ltrs capacity, complete all as specified & as directed.

Supply and fixing 2.5 Sq mm power cable 3 core suitable for geyser/solar connection, complete all as specified & as directed.

Supply and Fixing 4 Sq mm power cable 3 core suitable for geyser/Solar connection, complete all as specified & as directed.

Supply and fixing in replacement MS Drive Hose Clamps, suitable for 1-2 inch dia hose, complete all as specified & as directed.

Supply and fixing in replacement Solar water Hose pipe of exiting size and length AISI 316L Stainless steel Rubber insulation of thickness 13mm to 19mm , Special polyamide PA 6.6 braided with carbon steel or SS fitting to water connection for connecting Solar panel to solar water storage tank properly fitted with SS clamp on both ends, no leakage fully functional, complete all as specified & as directed.

Supply and fixing in replacement gun metal globe valve size 15 mm, complete all as specified & as directed.

Supply and fixing in replacement gun metal globe valve size 20 mm, complete all as specified & as directed.

Supply and fixing in replacement Hot water pipe duly insulated with glass wool and aluminium cladding galvanized iron water tubes 15 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling with and including cutting chasing whereever required and making good or laid in floor, complete all as specified & as directed.

Supply and fixing in replacement Hot water pipe duly insulated with glass wool and aluminium cladding galvanized iron water tubes 20 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling with and including cutting chasing whereever required and making good or laid in floor, complete all as specified & as directed.

Supply and fixing in replacement float Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe of exiting shape and size (Minimum weight 15mm-142gms/ 20 mm - 210 gms . /25mm-455gms/ 40mm- 690 gms), complete all as specified & as directed.

Material and labour for Lagging to pipes size 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, complete all as specified & as directed.

Material and labour for Lagging to pipes size 15 mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, complete all as specified & as directed.

Supply only mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends,dia meter of neck 11 to 15 mm , each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long, complete all as specified & as directed.

Supply and Fixing in repair MS rolled section as in main cross beams, hip and jack rafters: purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates.rivets, nut bolts etc complete all as specified , confirming FE 410 W (Gde-E-250) Quality B, complete all as specified & as directed.

Supply & Fixing in replacement 300 LPD FPC Non Pressurized solar water heaters tank of Material- SS304, Tank Thickness- 1.2mm, Insulated with Glasswool, without tank stand with provision of upto 6 electric heater for backup and provision for placing electric haeter shall be leakage proof, complete all as specified and directed. Note :- Cost of electric heater is not included in item but provision cost is included.

Supply and fixing in replacement solar flat plate collector type with heat exchanger of 300 ltrs per day capacity and size of collector 2112 X1035 X 101mm, complete all as specified & as directed.

Material and labour in replacement solar water tank insulation with resin bonded fibre glass wool roll of density 24 kg/Cum, with factory laminated aluminium vapour barrier, thickness of insulation as specified and including the following:- (a) M&L for cleaning the solar tank surface (to be insulated ) by scrapping carefully, completely free of millscale, dirt, dust, grease and other foreign materials, taking special care so that all solar water tank joints are sealed against any leakage. (b) M&L for applying rubber based adhesive CPRX compound. (c) M&L for sealing of all longitudinal joints and circular overlaps with and including Aluminium foil tape 50 mm wide, to make the insulation leakproof. (d) M & L for securing the insulation with and including mechanically fastened nylon/ steel straps of size 12 mm/50 mm at maximum intervals of 1.2 mtr. (e) M & L for arresting a leakage in solar water heater tank by Brazing/welding as per requirement and making tank leakproof complete and making existing solar system fully functional. Note- Material Cost per SQM for insulation material with resin bonded glass wool roll of density 24 kg/Cum with factory laminated aluminium vapour barrier along with CPRX compound shall be paid extra as per item no 152 as 'Supply only'.

Supply only solar water tank insulation with resin bonded fibre glass wool roll of density 24 kg/Cum, with factory laminated aluminium vapour barrier, thickness of insulation as specified and rubber based adhesive CPRX compound for item no 3, complete all as specified and as directed. Note for Solar Work:- Repair of solar work shall be carried out by the authorised representetive / service provider of OEM and necessary MoU in this regard shall be submitted by the contractor to Engineer-in-Charge before commencement of repair work.

Note for Solar Work:- Repair of solar work shall be carried out by the authorised representetive / service provider of OEM and necessary MoU in this regard shall be submitted by the contractor to Engineer-in-Charge before commencement of repair work.

Supply and fixing in replacement rotational moulded polythene (PVC) water storage tank, HDPE, off white colour, triple layered , cylinderical type fixed and hoisted in position on roof, at any height, of capacity 250/300 ltr and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gram), complete all as specified and as directed.

Supply and fixing in repalcement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing in repalcement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN of current carrying capacity 40-63 Amp in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing in repalcement amp rating 415V, 10KA 'B' curve miniature circuit breaker (MCB) TPN of current carrying capacity 40 to 100 AMP 32 in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

S&F white cover plate with frame ,1 module, complete all as specified & directed.

S&F white cover plate with frame, 2 module, complete all as specified & directed.

S&F white cover plate with frame, 3 module, complete all as specified & directed.

S&F white cover plate with frame, 4 module, complete all as specified & directed.

S&F white cover plate with frame, 6 module, complete all as specified & directed.

S&F white cover plate with frame, 8 module square shaped or rectangular module, complete all as specified & directed.

S&F Modular metal flush box, 1/2 module, complete all as specified & directed.

S&F Modular metal flush box, 3 module, complete all as specified & directed.

S&F Modular metal flush box, 4 module, complete all as specified & directed.

S&F Modular metal flush box, 6 module, complete all as specified & directed.

Supply and fixing in replacment of modular step fan regulator 1 module, complete all as specified & directed.

Supply and fixing in replacment of modular step fan regulator 2 module, complete all as specified & directed.

Supply and fixing in replacment of module switch 1 way 6 A, 1 module, complete all as specified & directed.

Supply and fixing in replacment of module switch 1 way 16 A, 1 module complete all as specified & directed.

Supply and fixing in replacment of modular socket, 6 Amps, 2/3 pin combined 2 module, complete all as specified & directed.

Supply and fixing in replacment of modular socket, 6/16 Amps, 2/3 pin combined 2 module, complete all as specified & directed.

Supply and fixing in replacement switch piano flush button SP one way 5/6 Amp, complete all as specified & directed.

Supply and fixing in replacement switch piano flush button SP one way 15/16 Amp, complete all as specified & directed.

Supply and fix in replacement Socket outlet 5 pin 5 Amps flush type, complete all as specified & directed.

Supply and fix in replacement Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type, complete all as specified & directed.

S&F in replacement switch socket combination outlet , 5 Amps 2 in 1 ,multipurpose 3 pin, 5/15 Amps, flush type having four holes for fixing complete all as specified and directed.

S&F in replacement switch socket combination outlet , 15 Amps 2 in 1 ,multipurpose 3 pin, 5/15 Amps, flush type having four holes for fixing complete all as specified and directed.

Material and labour in repair Concealed wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLSH in PVC insulated copper conductor, single core cable in surface/recessed as required size of 2 X 4 sq mm and 1 X 4 sq mm as earth wire, complete all as specified and as directed.

Material and labour in repair Concealed wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLSH in PVC insulated copper conductor, single core cable in surface/recessed as required size of 2 X 2.5 sq mm and 1 X 2.5 sq mm as earth wire, complete all as specified and as directed.

AGGARWAL & CO (BID ID -3305494)

R D Bansal (BID ID -3311196)

SANGAM ENGINEERS (BID ID -3304969)

Kular and Company (BID ID -3310601)