Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹18.6 L
EMD Value
₹18,623
Closing Date
11 Oct 2025, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Suma V
Erection of 3 Nos.of 11kV MCVCB switchgear feeder panels for bifurcation of 11kV feeders at 66/11kV Nallimaradahalli S/s, Operation Division, Doddaballapura on Partial Turnkey Basis including supply of all matching materials/equipments (excluding supply of 11kV MCVCB feeder panel), erection (including civil works) of all materials/equipments, testing & commissioning.
KPTCL/2025-26/EL/WORK_INDENT2810
KPTCL/2025-26/EL/WORK_INDENT2810
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Bengaluru
13 documents required · 13 mandatory
The Bidder should have carried out erection of atleast One (01) No. of 11kV voltage class or above voltage class Switchgear Replacement work/ Additional Switchgear works on Total or Partial Turnkey Basis in the last 10 years preceding the date of bid submission and shall be completed and commissioned prior to the date of submission of the Bid.
OR The Bidder should have carried out erection of not less than two (02) Nos. of 11kV or above voltage class Switchgear Replacement work Additional Switchgear works on Labour Contract Basis in the last 10 years preceding the date of bid submission and shall be completed and commissioned prior to the date of submission of the Bid
OR Bidder who have executed replacement of switchgear works of private firms under the direct supervision of ESCOM/KPTCL officers are eligible to participate. Such Bidder should have carried out erection of not less than TWO (02) Nos. of 11kV or above class Switchgear replacement work/Providing additional switchgear work on Total or Partial Turnkey Basis in the last 10 years preceding to the date of bid submission and shall be completed and commissioned prior to the date of submission of the Bid.
Works on hand details
The Tenderer/Bidder should possess valid Super Grade Electrical Contractors License issued by the Government of Karnataka as on the date of Bid Submissions)
Bidder shall be financially sound and shall submit audited financial reports for last five years preceding the date of Bid submission
Liquid Assets and /or availability of credit facilities of no less than Rs.Rs.4.65 Lakhs (Rupees Four Lakhs Sixty Five thousand only) (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.
Self declaration for - Where in the works awarded by KPTCL to the Tenderer/Bidder has been short closed invoking clause 49.7 & 49.8 of Conditions of Contract then the bidder shall not be eligible if such short closure has been initiated within 6 months prior to the last date of bid submission of this tender
Where the zonal Chief Engineers/ CEE(T&P) have issued notices in respect of on-going works in the last 6 months as on date of bid submission invoking Risk & Cost clause and where the work is not completed/ charged
The Tenderer/Bidder should not have been Blacklisted/ disqualified for non-performance in any of the Government utilities in the past five years as on date of Bid opening. Then in such cases, the offer of the bidder will be summarily rejected
The Tenderer/Bidder shall provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years with KPTCL. A history of awards involving litigations against the Bidder or any party or JV/ Consortium partner may result in rejection of bid
Undertaking to source the supply of equipment/material from KPTCL approved Vendors only
Description of the Tools & Plant available with them for execution of the Work
Any other required documents as per the qualifying requirements, terms and conditions of the tender, NIT & Technical specifications
₹500
₹18,623
26 Sept 2025
26 Sept 2025
13 Oct 2025
8 Oct 2025
Erection of 3 Nos.of 11kV MCVCB switchgear feeder panels for bifurcation of 11kV feeders at 66/11kV Nallimaradahalli S/s, Operation Division, Doddaballapura on Partial Turnkey Basis including supply of all matching materials/equipments (excluding supply of 11kV MCVCB feeder panel), erection (including civil works) of all materials/equipments, testing & commissioning.
Copper Control Cable
19Core x 2.5 Sqmm (out of 400 Mtrs requirement, 200 Mtrs will be supplied by KPTCL)
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mtr long with 2 part clamp out of G.I flat 50*6mm continuously welded alround the pipe using cast iron welding elec...
2 Pole Structure
H Frame for mounting 400 A GOS.
11kV 400A Special roaster GOS.
11kV HT Cable 3x400sq.mm
11KV Heat shinkable termination kit-out door for XLPE 3x400sq.mm
11KV Heat shinkable termination kit-indoor for XLPE 3x400sq.mm
Lightning arrester-10KV,5KA polymeric type with ground disconnector.
Erection of 11 kV switch gear including testing and commissioning: Erection, alignment and fixing to foundation including movement from point of unloading to the point of errection along with tes...
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mtr long with 2 part clamp out of G.I flat 50*6mm continuously welded alround the pipe using cast iron welding elec...
Releasing of existing CI Pipe for providing necessary space for construction of 11kV Switch gear platform.
Grounding of towers/equipment excluding the cost of G.I. Pipe/C.I. Pipe as per specification with 50 X 6 mm G.I. Flat 3 metre long (released CI pipes). But salt & charcoal to be supplied by the contra...
Grounding of equipment with 50*6mm G.I flat and connecting equipment to the earth mat ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and co...
Supply and fixing of 450mm dia,450mm height,1.5" to 2" thick Hume pipe collars for earth pits.
Erection of RCC/PCC 9 mtr DP Structure
Fixing of GOS H Frame
Fixing of 400 A GOS
Pole Concreting with coping (including supply of materials and labour)
Earthing name plate
Fixing of Heat shrinkable indoor Potheads for 3*400 sq mm HT UG cable
Fixing of Heat shrinkable outdoor Potheads for 3*400 sq mm HT UG cable
Laying of 11kV cable in the existing duct from Switch gear to DP
Laying of control cables from equipments to control panels (19Cx2.5 sq m-400 Mtrs and4Cx6 sqmm-115 Mtrs)
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epo...
Supplying heavy gauge PVC conduit pipe 25mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceil...
Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to ...
Medium point above 3m upto 6m from tapping point to out let via switch.
Long point above 6m upto 10m from tapping point to out let via switch.
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capaci...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying of 1X4 feet PVC Batten with integrated LED tube 40 W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI less than 80. Power Input: 220-240V@ 50/60Hz ...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Advisory Note 2810.docx
Tender Document • 0.01 MB
Civil Drgs.zip
Tender Document • 5.41 MB
Station and mounting structures.zip
Tender Document • 9.31 MB
Technocommercial Sheet NMHalli 2810.xlsx
Techno-Commercial Worksheet • 0.70 MB
Technical Specifications.zip
Tender Document • 15.46 MB
Tender Documents NMHalli 2810.docx
Tender Document • 0.46 MB
Circulars and Guidelines.zip
Tender Document • 1.47 MB
NIT NM Halli 2810.pdf
Tender Document • 0.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .