Estimate for constructing Boundary Wall of Faridkot Canal AND GW Division and Canal Colony

Amount

Dismantling brick work tile, masonry or tile lining - in Cement

Scraping cement plaster

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres

Cement concrete 1:4:8 with stone ballast 40mm gauge.

Reinforced cement concrete M-20 mechenically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-20 mechenically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels

Supplying fitting and placing HYSD Bar reinforcement in sub structure as per drawing and Technical Specifications.

Providing and fixing chicken mesh for brick work and RCC junction of galvanized low carbon wire, annealed wire of diametre 0.6 to 2.0mm distance between the faces of the hexagon 13 to 50mm complete in all respect

12.5 mm thick cement plaster 1:4

Forming groove of uniform size from 12x12 mm and up to 25x25 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. Two or more coats to give an even shade

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position for Tees angles & channels

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Fillet welding with high strength steel rods complete in all repects and to entire satisfaction of engineer-in-charge (i) 6 mm

Providing 7 watt LED based SPU street lighting system with 160wh lithium ferro phosphate battery

Supply and fixing of Blade wire(Concertina) over the top of wall with Straight G.I. barbed Wire within complete in all repects and to entire satisfaction of engineer-in-charge

Any other Item

The Jai Babe Di Cooperative Labour and Construction Society Ltd. (BID ID -597077)