REPAIRS TO SANITARY FITTINGS, PLUMBING WORKS AND OTHER CONNECTED WORKS IN RESIDENTIAL AREA AT CVRDE AVADI

Amount

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Dismantling floor/wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate), as in floor of 25 mm thick complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6complete all as specified and directed

Non-skid joint free matt finish ceramic coloured tiles (of approved quality) 10 mm thick size of each tiles not less than 605mmx605mm/ 600mmx600mm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bed layer in cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:3 complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6complete all as specified and directed

M&L 20mm thick granite (of any type) black coloured slab in single piece for platform of kitchen/WHB, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match over 15mm thick screed bed in CM1:4 the shade of granite stone including grinding and polishing complete.

S&f in repair shelf of PTMT fixed with and including plated brass screws and wooden/plastic cleats (minium weight 300gms).

S&F in repair Tubular towel rail 20mm dia D type 60cm long between flanges brass chromium plated.

Supply and fix in repair 15 mm bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed but fancy type, chromium plated all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair 15mm stop valves/angle cock but fancy type, chromium plated, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Chromium plated brass shower rose 125mm size and 15mm dia with swivel joints.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450mm all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms)all as specified and as directed by the Engineer-in-Charge.

S&F Roatatinal moulded polythen water storage tank 500 litres capacity (cylindrical vertical with closed top ) hoisted and fixed in position including taking down all as specified on SSR part I all as specified and directed by Engineer-in-Charge.

S&F Roatatinal moulded polythen water storage tank 1000 litres capacity (cylindrical vertical with closed top ) hoisted and fixed in position including taking down all as specified on SSR part I all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick walls including racking out joints, hacking for key scrubbing down with water etc. all as specified and directed by Engineer-in-Charge.

M&L for Rendering 10mm thick in fair faces of brick work or concrete wall surfaces in CM 1:6 finished even and smooth with out using extra cement all as specified and directed by Engineer-in-Charge.

M&L for preparation of new decorated surfaces and applying two coat of distemper over a coat of primer on walls all as specified and directed by Engineer in charge.

S&F Chromium plated cast copper alloy health facuet for 15mm dia incl telephonic pipe & holder Complete (Make : Parryware T9940A1 Slimline with SS Hose & Hook)

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern(Push type), low level, white, with inlet, ball valve, float and handle including brackets (10 Ltrs)all as specified and as directed by the Engineer-in-Charge.Make: Parryware (Slimline)

Supply and fix in repair vitreous China wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and finning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe all as specified and as directed by the Engineer-in-Charge.

Supply and fix 32 mm waste fitting, brass, chromium plated for glazed ware WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair 15 mm dia pillar taps long neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed but fancy type all as specified and as directed by the Engineer-in-Charge.

S&F in repair vitreous china squatting pan 'Orissa' pattern `long size 580x440 mm white, with integral foot rests incl with `P’ or `S’ trups front or back intel, including connecting flush pipe etc complete incl provision of cement concrete bedding.

Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

Supply and fix in repair plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinges devices all as specified and as directed by the Engineer-in-Charge.

S&F low density 32mm polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to wall all as specified.

Taqking down shutter of any description exc 1 sqm but n.exc 2 sqm each.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C' channel having a PVC sheet strip of 20 mm widht stuck inside with solvent cement for striles and plain colour PVC sheet for top rail lock rail and bottom rail on eitherside and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS foame welded /sealed to the stiles and rails with suitable PVC sheet beading and joned to gether with solvent cement, supplying and fixing in the fame at site as per specification and drawing.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet rreinforced with MS square tube , supplying and fixing in opening as per specification and drawing.

S&Fin repair sink with drainage board made of stainless stell 1 mm thick kitchen or laboratory with plugs, washers and wasters including bedding in cement in dwarf wall or including fixing cantiliver brackets and connecting union to pipe over all sixe 915 mm x 460mm , bowl sixe 410mm x 330mm x 160mm

Supply and fix 40 mm waste fitting, brass, chromium plated for glazed ware sink with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair 15 mm dia Drizzle soft brass valve tap, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed but fancy type all as specified and as directed by the Engineer-in-Charge.

Cutting windows/ventilators from its position and Welding with box type hinges including replacement of damaged member and making good the surface by painting with synthetic enamel paint including primer all as directed by Engr-in-charge

S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or wire staples

S&F stainless steel kitchen plate rack size 24"X24"X10" all as specified.

Taking down steel water tubing and connection for 15mm bore pipe and removing from site or work complete all as specified and directed by Engineer-in-Charge.

Taking down steel water tubing and connection for 20mm bore pipe and removing from site or work complete all as specified and directed by Engineer-in-Charge.

S&F Galvanised Steel water tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls (concealed), ceiling or laid on floors including testing complete all as specified and as directed.

S&F Galvanised Steel water tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls (concealed), ceiling or laid on floors including testing complete all as specified and as directed.

S&F in repair Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repair in 20mm dia pipe (Minimum weight 2 0 m m - 2 1 0 g m s)

S&Fin repairs PVC down take pipe 600mm long for wash hand basin fitted to 32 mm dia waste coupling

S&Fin repairs PVC down take pipe 600mm long for Sink fitted to 40 mm dia waste coupling

Cleaning and removing all scales and dirt etc from Exc 250 liters capacity & n. exc 500 litres tanks and from mouth of circulating pipes of tanks and cleaned with bleaching powder including removing old painting letters not less 10cm height and writing month and year with synthetic enamel paint on tank surfaces all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scales and dirt etc from Exc 500 liters capacity & n. exc 1000 litres tanks and from mouth of circulating pipes of tanks and cleaned with bleaching powder including removing old painting letters not less 10cm height and writing month and year with synthetic enamel paint on tank surfaces all as specified and directed by Engineer-in-Charge.

Taking down AC rainwater pipes (any size or pattern) from walls fixed with cement joints, including all fittings, heads, shoes, bends, swan-necks, etc.,(measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, 75mm dia, in any length, jointed with rubber ring joints, fixed with and including provision of necessary wall clamps / straps as in rain water pipes, complete all as specifed and directed.

S&F PVC (SWR) pipes single socketed, 110mm dia, in any length, jointed with rubber ring joints, fixed with and including provision of necessary wall clamps / straps as in rain water pipes, complete all as specifed and directed.

S&F PVC (SWR) bends of any radius suitable for 75mm bore pipes, complete all as specified and directed.

S&F PVC (SWR) bends of any radius suitable for 110 mm bore pipes, complete all as specified and directed.

SathguruSaiEnterprises

SAMYDOSS CONSTRUCTIONS

K Kumar Construction

S.R.CONSTRUCTION