SPL REPAIRS TO ROOF AND CEILING OF BLDG NOS AT T-6 AND T-6 A (SINGLE LIVING ACCN FOR TRAINEES) AT TB-III, MEG AND CENTRE AND PROVN OF CABINET FOR STORAGE OF DENTAL EQUIPMENT AND MEDICINE AT MDC UNDER GE (NORTH) BANGALORE

Amount

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in framed work etc complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

M&L for Mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed

All as per item No 7 herein before but erection and fixing only after rectifying all the bending including welding/ reiveting etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA, 150AZ as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA, 150 AZ as in ridges / Valley Gutters to wall, fixed with self tapping screws etc complete all as specified and as directed

M&L for Pre-cast Cement concrete 1:3:6 type C1 using 20 mm graded stone aggregates as in solid block masonary, exc 10 cms in width and setting in cement mortar 1:6 all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 10 mm thick cement mortar 1:6 on fair faces of brick work or concrete surface and further 5 mm thick cement mortar 1:4 mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately)

M&L for rendering 5 mm thick cement mortar 1:3 on fair faces of concrete ceiling surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for Screed bed 10 mm thick in cement mortar 1:3 mixed with water proofing compound to receive roof tratement etc complete all as specified and as directed (Notes: WPC shall be measured and paid seperately under relevant item)

M&L for Water proofing treatment over RCC roof surfaces with following specification complete all as specified and directed :- (i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth. (ii) Applying compatible primer @ 0.30 Litr/Sqm over roof surface to receive APP membarane. (iii) APP modified water proofing membrane 3mm thick and weighing not less than 3.00kg/Sqm reinforced with non woven polyster black finished with torch applications. Membrane shall be provided with 100mm side overlap and 150mm end lap. App membrane work shall be all as per manufacturer's instructions. (iv) Applying a coat of aluminum paint on top @ 0.10 litre/sqm

M&L for Providing cement concrete 1:2:4 type B0 using12.50mm graded stone aggregate as in copings, levelling concrete , kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

Supply only liquid water proofing compound

Taking up or down 20 mm steel tubing and connections, cleaning for refixing and removal to store etc complete all as specified and as directed.

Taking up or down 25 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed.

Dismantling water tanks exc 500 and not exc 1000 ltr capacity and removing to store etc complete all as specified and as directed

Dismantling water tanks exc 1000 and not exc 2000 ltr capacity and removing to store etc complete all as specified and as directed

S & F CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ ceiling or laying in floors complete all as specified and directed.

All as per item No 23 herein before but 25 mm outer dia of pipe

M & L for rotational moulded polythene water storage tank of capacity 1000 ltrs (cylindrical vertical with closed top), double layered hoisted and fixed in position all as specified in SSR part I complete all as specified and directed

Ditto all as per item No 25 herein before but except tank

M & L for rotational moulded polythene water storage tank of capacity 2000 ltrs (cylindrical vertical with closed top) double elayered, hoisted and fixed in position all as specified in SSR part I capacity of complete all as specified and directed

Ditto all as per item No 27 herein before but except tank

S & F Ball float valve 25 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and as directed [Minimum weight for 25 mm –455 gms] .

S & F in repairs Gun metal, globe or gate valve 25 mm with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

Complete removal of existing treatment by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for wall care putty 1mm thick on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L for Preparing new putty finished surface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed

M&L for preparation of new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed

M&L for Preparation of treated wall surfaces wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed

M&L for preparing newely plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for preparing Old Plastered surface of ceiling and applying two coat of white wash etc complete all as specified as directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for Preparation of old Wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

M&L for Plain cement concrete 1:4:8 type D- 2, using 40mm graded stone aggregate as in 75 mm thick sub base of flooing etc complete all as specified and as directed

M&L for PCC 1:3:6, type C-1, using 20 mm graded aggregates as in 75 mm thick plinth protection etc, finished even and smooth without using extra cement including joints filling with sealing compound Grade "A" complete all as specified and directed.

M&L for Screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Cement concrete designer chequered tiles, Coloured glossy finish rubber pressed, exterior grade of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

S&F in repairs False ceiling with grid suspended system of size 600X600mm standard section consisting of main runner 25x40mm , cross Tee 25x25mm and wall angle 25mmx25mm as per manufacturer instruction / catalogue , ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with PPPCGS) including 4 mm thick High Pressure Steam Curing(HPSC) self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed

Removing building materials etc. (other than spoil payable under items 03029 to 03031SSR part-II) to a distance of exc 1.0 Km but not exc 1.00Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

M&L for Granite stone slab 25 to 30mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing including 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and as directed

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed Note - Particle Board & Glass shall be measured and paid separately under respective items.

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items.

S&F Sheet Glass 4mm thick, Ordinary quality and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed

S&F aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed

S&F double action floor springs, hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heave duty and fixed etc complete all as specified and as directed

S&F Tinted sheet glass 5.5mm thick and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed

S&F Prelaminated particle board 9 mm thick, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc omplete all as specified and as directed

S&F in repairs 18mm thick block boards, grade I quality, exterior grade, commercial type, water proof, termite proof, fixed with screws to timber frame work as in modular kitchen/ cup board shutter including 0.9mm thick decorative laminate type I fixed on all sides of block board, surface finish colour & pattern as approved, fixed with approved adhesive as per manufacturer instruction etc complete all as specified and as directed.

S&F Stainless steel basket in various type of baskets such as plain basket all as specified and directed.

S&F Stainless steel channel for basket sizes 600mm long and 46mm wide all as specified and directed

S&F Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified.

S&F powder coated Stainless steel handle 125 mm size fit to modular section etc complete all as specified and as directed

S&F Second class hard wood scantling clean sawn surfaces including a coat of creosote oil painting etc complete for grid work of wall panelling fixed with nails in the wall etc complete all as specified and as directed

S&F wall panelling/cup board shutter & shelves with following specification complete all as specified and as directed :- (i) 8mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work to receive MFD board (ii) 4mm thick MFD board, medium density, fibre board, single layer type or three layer type with BWR type adhesive, fixed with screws to receive laminate (iii) 0.90 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions etc complete

S&F Plaster of paris ceiling 10 mm thick (Gypsum anhydrous) including sunk or raised moulding or coving, design, pattern as decided fixed Gl frame work for seamless including GI suspenders and joints of ceiling board shall be finished with textile tape etc complete all as specified and directed Notes : Quoted rate is deemed to be included for GI Snap Grid work/ GI suspenders, design of ceiling etc complete. Nothing extra shall be admissible on this accout.

M&L for Preparing new ceiling surface and applying two coats of Distemper oil emulsion over a coat of primer complete all as specified and as directed

M&L for Vitrified Ceramic tiles (Light Shade) 10 mm mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, call bell socket or power circuits) complete and making good the disturbed surface of walls, ceiling etc including making good to match adjoining surfaces all as specified and as directed

M & L for concealed Point wiring with PVC insulated unsheathed single core multi-stranded FRLS copper conductor cable of 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn through and including non metalic rigid PVC conduit medium grade IS marked including accessories concealed type wiring including G I branded sunken boxes suitable for modular concealed in walls including modular frame & cover of suitable module fixed with cadium plated iron screws for housing modular switches, socket outlets, fan regulators etc including 1.5 sqmm single core PVC insulated unsheathed copper conductor cable earth continuity conductor and connecting to common earth dolly for One light point / 6Amp socket / fan point controlled for one switch all as specified & directed

All as per item No 70 herein before but for 5Amps, 3pin socket on same board with other switches

Supply and fix Modular switch, 1way, 6Amps, 1module all as specified and as directed

S & F Ceiling rose surface bakelite 65x50mm, three terminals all as specified and as directed

S&F ceiling fans 1200mm Sweep with blades, down rods complete accessories, 230Volts, SP with service value 6.00 BEE five star rated, minimum air delivery 210cfm with brushless direct current motor(BLDC) all as specified and as directed

Supply & Fix Modular fan regulator,120W -2module all as specified and as directed

Supply and fix Modular socket 6A-2/3 combined -2module all as specified and as directed

Supply and fix Modular socket 6A/16A-2/3 pin combined 2 module all as specified and as directed

Supply and fix modular switch 1way 16A, 1module all as specified and as directed

M & L for Point wiring concealed type with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked including accessories concealed type wirng including G I branded sunken boxes suitable for modular concealed in walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing the modular switches, switch socket outlets, fan regulators etc., including provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

M & L for Point wiring concealed type with 4 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked including accessories concealed type wirng including G I branded sunken boxes suitable for modular concealed in walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing the modular switches, switch socket outlets, fan regulators etc., including provision of 4Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

M & L for Sub main wiring two runs 6 Sqmm PVC insulated single core multistranded FRLS copper conductor cable 1100 volts grade multistranded copper conductors and one run of single core 6 Sqmm earth continuity conductor drawn through & including suitable size PVC conduit medium density ISI marked including accessories all as specified and as directed. Note : Three run of 6sqmm cable and one run of PVC conduit altogether will be measured as one unit

M & L for Sub main wiring two runs 4 Sqmm PVC insulated single core multistranded FRLS copper conductor cable 1100 volts grade multistranded copper conductors and one run of single core 4 Sqmm earth continuity conductor drawn through & including suitable size PVC conduit medium density ISI marked including accessories all as specified and as directed. Note : Three run of 4sqmm cable and one run of PVC conduit altogether will be measured as one unit

S& F in replacement of Single pole & neutral enclosure 20 Amps & 240 Volt with two pin and earth plug and socket complete with one single pole MCB 20Amps all as specified and as directed.

S&F Recess mounted LED Luminaire of capacity 36 Watts, size 600x600mm suitable for Gypsum/ grid type false ceiling white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all as specified and as directed.

S&F in replacement of MCB Distribution Board, SPN 8 way, double door type, 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in replacement of MCB single pole 240 volts 32 Amps complete all as specified and as directed

S&F in replacement of MCB SPN 240 volts 32/40 Amps complete all as specified and as directed

MAA ENGINEERING SERVICERS (BID ID -3131363)

S S CONSTRUCTIONS (BID ID -3130952)

Aavani BUILDERS AND CONTRACTORS (BID ID -3144214)