Maintenance Repair works to Palamstation Road ICDS No.301,306 and Kumaran salai ICDS no. 409,410 in ward no.29

Amount

Dismantling, clearing away and carefully stacking materials Floor finish and dadooing walls in Cement Mortar with mosaic tiles/ glazed tiles/ cuddapah slabs.

Dismantling, clearing away and carefully stacking materials useful for reuse for Pressed tiles & weathering course

Clean removal of cement plaster from walls and racking out joints 20mm deep

Plastering with cement mortar (1:5) 20 mm,thickin all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.309)

Plastering with cement mortar 1:3, 20mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supplying and fixing inposition of best approved colour design and quality FRP sheets of 1.5mm thick with necessary 'U' or 'J' bolts, bitumen washers and cutting the FRP sheets to the required size. etc. complete.

Weathering Course with Concrete Broken Brick (S.I.No.278) & (P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.

Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc.,complete

Plain Cement concrete 1:4:8 (One cement four sand and eight aggregates) using 40mm gauge hard broken granite jelly for foundation including consolidation and dewatering for foundation wherever necessary etc. complete

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers Hard stiff clay, stiff black cotton, hard red earth, shales, murram gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil.SS20B

UN PLASTICIZED PVC PIPES FOR POTABLE UGD AS PER IS 4985 /2000 - 110mm PVC pipe

G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 - 20mm GI pipe

20mm GI Coupling

20mm GI Bend

20mm GI Elbow

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Painting old wall surface with Two coat of Plastic Emulsion paint of approved qualityincluding cleaning of plaster surface with soap soda and water by manual labour.

Painting Two coats with Ready Mixed Enamel Paint over the Old Iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floor

Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch (two way) in flush with wall and covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC stair case light point.

Supplying and fixing of 18W 4 Feet LED fitting with LED.

AC Ceiling fan complete 1200mm (48”) sweep with 300mm Down rod.(without regulator) (Higher end)

Add GST 18%

PITCHAIMANI N (BID ID -1285046)