GE (W)/HSR-35/2024-25 CERTAIN PROVNS OF GATES AT TCP - ACS, SPL REPAIR TO BLDG NO P-518 AND ADDN-ALTN IN BLDG NO P-625

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.

Taking down chowkats or frame without taking off shutters(with or without glazing and ventilator) not exc 1.5 Sqm each complete all as specified and directed.

Providing and fixing factory made 100% solid WPC (wood polymer composite)- door frame of size 75mmx50mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60 (suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for WC/Bathroom/Toilet and external uses complete all as specified and directed.

M&L Providing and fixing 30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/ enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capacity (screw withdrawal strength of 2000 n (face) and 1100 N (edge) minimum compressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws for WC/bathroom/toilet/Kitchen/ Balcony doors complete all as specified and directed.

S&F Providing and fixing anodised Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, sliding windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate any sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Necessary fittings like lugs, hinges, cleats, rollers, handles, locking arrangement, glazings clips, rollers for sliding and rubber beadings shall deemed to be included in quoted rate and shall not be measured and paid separately.

S&F Anodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, handle 2 Nos in each door, anodised alumnium snap beading, screws etc. complete all as specified. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Necessary fittings like lugs, hinges, cleats, rollers, handles, locking arrangement, glazings clips, and rubber beadings shall deemed to be included in quoted rate and shall not be measured and paid separately.

S&F for 5.5 mm thick dark coloured glass for doors including black film for making glass opaque and windows/ frosted dark coloured glass for ventilators in aluminium door windows and ventilators partitions including ped/gasket complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to powder coated windows and doors complete all as specified and directed.

S&F powder coated aluminium deco grill with minimum weight 1.00 Kg/Sqm, fixed to powder coated windows and doors complete all as specified and directed.

M&L Aluminium die cast body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F for Aluminium Motrice lock 4 levers, vertical type 75mm size for aluminium doors .

S&F 150 mm extruded Aluminium handles, cast type, anodised complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed.

S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250mm size complete all as specified and directed.

S&F butt hinges 100mm, medium weight complete all as specified and directed.

M&L 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone including rubbing & polishing complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing); and removal complete all as specified and directed.

M&L for coloured/digitally printed non skid matte finish ceramic tiles 7 to 8mm thick, of size 600 mm x 600 mm as in floors etc set and jointed in neat cement slurry pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for coloured/digitally printed glazed ceramic tiles of size 300 x 600 mm thick as in vertical surface in light and dark shade combination set and jointed in neat cement slurry with 3-5 mm tiling Spacer tool and pointed flush with white or coloured Epoxy to match, over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.

M&L steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe including taking down of pipe complete all as specified and directed.

M&L steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20mm bore of pipe including taking down of pipe complete all as specified and directed.

S&F in repair Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set, Cistern fittings including S trap and other items , Size: 640x350x770mm, (concealed ‘S’ trap) complete all as specified and directed. Make : Cera Cat No. A1014110/ESSCO Cat No ECS- WHT-851S220NPP/Somany- "SWISS".

S&F in repair vitreous china clair with clea Half pedestal oval bowl and provision for tap hole snow white wash hand basin (Size 480x480x520mm) colour brilliant / off white incl waste pipe and waste coupling over and including size complete all as specified and directed. Make: Cera- Cat Part No. A2040104 for Wash Basin and for pedestal Cat Part No. A2090102 Half Pedestal/ ESSCO ECS-WHT-801 for Wash Basin & ECS-WHT-301 for pedestal and Somany "ELITE"

S&F in repair brass chromium plated Basin Mixer single lever for half pedestal Wash Hand Basin complete all as specified and directed. Make: Cera Cat Part: G1017451, ESSCO Cat No C05103051b AND Somany Chrome 27111370011.

S&F in repair 15 mm dia CP Angle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. Make : Cera Cat Part No. G1017201,and ESSCO-SQT-526NKN AND Somany CHROME 272211400011.

S&F in repairs 15mm bore CP Two Way Angle valve cast copper alloy fancy type chromium plated and fixed complete all as specified and directed. Make: Cera Cat Part No. G1017211 AND ESSCO Cat Part No MQT-526AFKN AND 272211150061.

S&F in repair CP cardiff brass cascade Health Faucet with hose (Min length 1.5mtr of CP brass) & hook of CP brass complete all as specified and directed. Make: Cera Cat Part No. F8030106AB, ESSCO ALE-CHR-593 AND Somany CHORME 272150680341.

S&F in repair CP 600 mm towel Rail complete all as specified and directed. Make: Cera Cat Part No. F5011103CH, ESSCO AEC-1111N AND Somany 272130160111.

S & F in repair brass chromium plated tubular Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. Make: Cera Cat Part No. F5011101CH, essco aec-1181-n and sOMANY 272130160081.

S&F in repair for CP toilet roll holder fixed to wall with chromium plated brass screw completely and complete all as specified and directed. Make Cera Cat Part No. F5013110CH, essco aec-1151n and sOMANY 272130740041.

S&F in repair Liquid soap Dispenser CP complete all as specified and directed. Make: Cera Cat Part No. F5013111CH and Somany chrome-272151340071.

S&F in repair Kenso 320x335x620 mm urinal with sensor complete all as specified and directed. Make: Cera Cat Part No. A4010101

S&F in repiar ceramic Urinal partition complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair Corner Glass Shelf (with Bracket) 300 mm x 300 mm complete all as specified and directed. Make Cera Cat Part No. F5005103 and Somany 272130160031.

S&F 15mm chromium plated cast copper alloy bib taps fixed in repair complete all as specified and directed.

S&F in repair Mirror of size 900x700 mm complete all as specified and directed. Make Cera Cat Part No D3510107

Supply & fixing in repair 1000 litre capacity ISI marked double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including making inlet/outlet connection complete all as specified and directed.

S & F in repair gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F, PVC floor trap 75mm bore with grating including jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.

M&L for old size brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

Dismantling of brick work built in cement mortar complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 over brick / concrete wall surfaces trowelled to even & smooth without using extra cement for internal wall surfaces complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on brick or concrete wall external surface of any description finished even and smooth without using extra cement including liquid water proofing admixture as per manufacturer's instructions complete all as specified and directed. Note :- WPC will be paid separately.

Description all as per item No 51.00 but 10mm thick in CM 1:3 as in ceiling complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of OBD over one coat of 3mm thick wall care putty on wall complete all as specified and directed.

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for Preparing new plastered or unplastered surfaces of walls and M&L applying two coats of exterior emulsion paint of make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over two coat acryllic wall care putty as aprproved by Manufacture.( The work under this item shall be carried out by from authorised applicator of manufacturer). The contractor shall also stand for grarantee of the quality and finish of work under this item for period for a period of five years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be refund only after completion of graratee .In lieu of retention the contractor may submit deposit receipts from any scheduled bank complete all as specified and directed.

M&L for Complete removal of existing treatment, washing down and stopping of distempered and painted surfaces using electrical operated grinder and M&L applying two coats of exterior emulsion paint of make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over two coat acryllic wall care putty as aprproved by Manufacture.( The work under this item shall be carried out by from authorised applicator of manufacturer). The contractor shall also stand for grarantee of the quality and finish of work under this item for period for a period of five years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be refund only after completion of graratee .In lieu of retention the contractor may submit deposit receipts from any scheduled bank complete all as specified and directed.

M & L two coats of OBD on old decorated plastered or unplastered surfaces over two coat acryllic wall care (Birla/JK white) putty and a coat of primer on walls including preparation of surfaces complete all as specified and directed. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of Two years from certified date of completion of complete work for which an amount Rs 10/Sqm of quantity of work done under this item shall be retained in final bill. This amount shall be returned only after completion of guarantee. In lieu of retention the contractor may submit deposit receipts from any scheduled bank complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling / soffit and applying one coats of white wash complete all as specified and directed.

Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed.

M&L for weld-mesh of size 75x75x3mm to be wrapped on the exposed surface of rib of beam & on the slab bottom and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture SIKA Plasto creat plus or equivalent make in Fosroc / Thermax as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure. the gunited surface to be cured properly for a min of 7 days all in complete as per the technical specifications and manufacturer's instructions and complete all as specified and directed.

Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using Product : Rustoff-100 of Sika or equivalent make in Fosroc / Thermax as approved by GE, with density : 1.01 Kg/ltr at 30°C and consumption : 0.2 kg/Sqm/coat complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar

Supply and apply cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and product requirements: carbonation resistance : 2 mm of SikaTop Armatec-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N/Sqmm according to ASTM C 882-78 complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar.

M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.

M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness of upto 10mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.

M&L Prelaminated PVC solid Board ,18/19 mm thick, Prelaminated on one side with decorative choice lamination & other side balancing white lamination , including pasting with solvent chemical as required at site or fixed with screws complete as in Kitchen Cupboard, room cupboard, shelves / partition including fixing arrangement on walls complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified and directed.

S&F PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, including PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls complete all as specified and directed.

Excavation in trenches n.exc. 1.50 m wide and n.exc. 1.50m in depth for foundation and getting out including demolition of necessary road and paved path area complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated material soils n.exc. 50m and deposited where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.

M& L PCC 1:4:8 type D-2 as in foundation of gate pillars and as subbase complete all as specified and directed.

M&L for formwork to sides of Concrete foundations, fottings, bases of columns, raft and raft beams ,sides and soffits (if any )of foundation and plinth beams ;and similar work ;vertical or to batter complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B1(20 m graded aggregates) in Foundations, including rafts, footings, foundation beams; plinth beams, bases for columns etc ;basement slabs ,under-reamed piles and mass concrete complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B1 (20m graded aggregates) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel bar 5 mm dia over and upto and including 10mm dia in stirrups spacers and binders complete all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:4 on faces of brick work or concrete work, finished even & fair without using extra cement complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, staircase treads and risers, jambs, pillars, window-cills, cooking plateform, and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F Mild steel confirming to Fe 290 Grade E-165 in framed work such as grills , gratings etc with ends of bars Shouldered and/or riveted or forged into spikes ;framed guard bars; barred iron doors, ladders; rallings and similar as in side hung gates work , including iron sheets , wheels , wheel track , hold fast, rails, mild steel gate rollers and mild steel supports to walls etc including necessary fittings complete all as specified and directed. Note: All mild steel items as per drawing of gates approved by GE shall be paid under this items only

M&L for two coats of synthetic enamel paint on steel surfaces of any description over coat of red oxide primer over 10cm in width or girth not otherwise described including preparation of new surfaces complete all as specified and directed.

Providing and laying 80 mm thick factory made chamfered edges cement concrete paver block octagonal shape (Rubber Moulded ) of M-30 grade with approved colour ,design and pattern as in footpath , park ,lawn ,driveway , or light traffic parking , etc of required strength thickness and size made by table vibratory method using PU mould laid in required color and pattern over and including 50 mm thick compacted bed of coarse sand , compacting and proper embedding / laying of interlocking paver blocks into the sand beddings layer through vibratory compaction by using plate vibrator , filling the joints with fine sand and cutting the paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for coloured Chequered cement concrete tiles 30 cm x 30 cm x 25mm thick, set jointed and in grey cement and pointed with pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate) kerb Stone, setting in CM 1:4 complete all as specified and directed.

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for hard core of broken bricks of gauge n.exc 63mm deposited and spread and levelled in layers n.exc 15cm tick watered and rammed to a true surface complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L rough cast plaster as specified (rendering coat not less than 10mm thick in CM 1:3, while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of white wash on undecorated surface complete all as specified and directed.

M & L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290 (Gde E-165) complete all as specified and directed.

M&L MS plates plain Square cut forming holes without any attachment conforming to Fe 410-0 complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including taking down old earthenware roof tiles complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F 4 mm thick frosted glass, premium quality fixed in ventilator and window with acrylic putty/ beading in square n.exc 0.5 sqm each pane including Hacking out old broken glass n exc 1.5 sqm (any thickness, size and description) from wooden / metal frames glazed with putty or fixed with beads complete all as specified and directed.

M & L for 12 mm thick frosted toughned glass door for bathrooms of required size including creating a design and pattern on full portion of toughened glass as per user requirement including locking arrangement, premium large size handles: 2 nos on each door , and all necessary fittings for fixing/ functioning of the door complete all as specified and directed.

S&F Hollow PVC wall panelling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls complete all as specified and directed.

S&F Framed work Fe- 290 (Gde E-165)as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixig of steel sheeting or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other coverings, running rails and guides) and hanging also fastening and fixing complete all as specified and directed.

S&F 1.25 mm Mild Steel plain Black sheet in Hearths, Covering to door Chowkats (frames) including welding of sheeting to frame , chullah hoods ,water tanks ,water troughs, ducts, urinal troughs and funnels etc cut to size edges beaded if directed ,holes punched including round headed screws ,clout nails or rivets and fixed to wood or steel members etc with plain 40 mm lap joints or welded / riveted seams including bending ,turning up ,mitred angles ,stopped ends, outlets etc as required complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for light and dark designer coloured combination, finish ceramic tiles 8-10 mm thick of size 300x450 mm in walls etc set & jointed with 10-12 mm thick tile adhesive of same make and flush pointed with matching colour Epoxy, including taking down existing plaster and making the surface even to receive tile adhesive using average 10-15 mm thick plaster in cement mortar 1:4 complete all as specified and directed.

M&L for Dark coloured met/glossy finish ceramic tiles 8-10 mm thick of size 600mm x 1200 mm in walls etc set & jointed with 10-12 mm thick tile adhesive of same make and flush pointed with matching colour Epoxy, including demolition of existing stones and making the surface even to receive tile adhesive using average 10mm thick plaster in cement mortar 1:4 complete all as specified and directed.

M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in bed of drain, sub base of flooring/ hard standing complete all as specified and directed.

Taking down cement plaster of any layers upto brick level upto three Storey including scaffolding including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 over brick / concrete wall surfaces trowelled to even & smooth without using extra cement for external wall surfaces upto three storey including scaffolding Bldgs mixed with WPC as per manufacturer instruction complete all as specified and directed. Note : The above quoted price are including of WPC.

M&L for preparing new plastered or unplastered surface of walls upto three storeys incl scaffolding and applying two coats of weather proof paint using roller of .make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over two coat acryllic wall care putty as approved by Manufacture. NOTE: The work under this item shall be carried out by contractor from authorised applicator of manufacturer complete all as specified and directed. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of four years from certified date of completion of complete work.

M&L for preparing old plastered or unplastered surface of walls upto three storeys incl scaffolding with and including complete removal of existing treatment of any layer of wall using mechanical sander with internal dust extraction system and applying two coats of weather proof paint using roller of .make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and including of a coat of exterior wall primer over two coat acryllic wall care putty as approved by Manufacture complete all as specified and directed. Note: The work under this item shall be carried out by contractor from authorised applicator of manufacturer. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of four years from certified date of completion of complete work

M&L, 15mm thick rendering upto three storeys in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth w/o using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surface of walls upto three storeys including scaffolding and applying two coats of OBD using roller over two coat of 1mm thick wall care putty on wall complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of any layer of wall using mechanical sander with internal dust extraction system and applying two coats of OBD using roller of Make: berger/Shalimar/Asian Paints over two coat of 1mm thick wall care putty of same make on wall complete all as specified and directed.

M&L precast cement concrete louvers and jallies 25 mm thick type B0 1:2:4 (12.5 mm graded aggregate) measured solid , including set in cement mortar 1:4 , including all mouldings but excluding frames complete all as specified and directed. Note : Precast frame shall be measured and paid separately.

M&L precast cement concrete frame and pillar of jafri work ,type B1 1:2:4 (20 mm graded aggregate), including set in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level), including removing out of MD Land complete all as specified and directed.

S&F for stainless steel modular kitchen basket including PVC cabinet as required size for 17" x 20 " ht 6" for cutlery (bowl, tumbler and like) with wired bottom using 6mm rod of grade 304 stainless rod as per approved design and pattern including necessary drawer slides of required size and chromium plated folding handles 75mm size for drawersy complete all as specified and directed.

Description all as per item No 117.00 above but plain bottom cutlery (spoon, knife and like) complete all as specified and directed.

Description all as per item No 117.00 above but high 8" for plate/ thali complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site. including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

Description all as per item No 121.00 but One three pin 5 Amp socket outlet point on independent board controlled by one Nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 121.00 but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissibility diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equivalent in Philips, Havells.

Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non-metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.

M&L for providing/cutting the round/ square hole of reqd size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing propeller type ac ventilating fans, single phase , 230 volts 250 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor complete all as specified and directed.

M&L for point wiring with 4 sqmm, single core, PVC insulated but unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductor and earth continuity wire with similar 4 sqmm cable (including connecting to earth dolly) drawn through and including rigid PVC conduit and conduit accessories / fittings, fixed/ laid in concealed in wall and surface on ceilings (including cutting chases in wall and also including sunk in type pressed steel terminal box and 3mm thick plastic laminated sheet complete all as specified and directed. Note : Rate of cutting chases deemed to be included in quoted rates.

Supply and install wall mounted type units indoor & outdoor of capacity 2 TR with copper condenser coil inverter AC complete with cordless remote control unit and within built Heating and cooling arrangement and digital inverter twin rotary compressor single phase unit 220 V-240V, 50 Hz minimum 5 star rating and EER 3.2 of capacity complete all as specified and directed. Make : Hitachi Voltas / Bluestar/Samsung/carrier

Supply & fixing sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 20 Amp rating 240 Volt complete all as specified and directed.

Supply and install wall mounted type units indoor & outdoor of capacity 2 TR with copper condenser coil inverter AC complete with cordless remote control unit and within built Heating and cooling arrangement and digital inverter twin rotary compressor single phase unit 220 V-240V, 50 Hz minimum 5 star rating and EER 3.2 of capacity complete all as specified and directed. Make : Hitachi Voltas / Bluestar/Samsung/carrier

Supply & fixing Voltage Stabilizer for automatic operation single phase neutrally air cooled indoor type & designed for input varriatin between 170 V to 250 V with output voltage stabilized at 230V with accuracy +_2.5% and of capacity 5 KVA complete all as specified and directed.

Siya constructions (BID ID -3081727)

m/s krishna engineers1 (BID ID -3083051)

M/S Sulakh Brothers (BID ID -3081372)