SPECIAL REPAIRS TO LT/UG CABLE AND PANEL BOARDS AND PROVN OF CERTAIN MINOR WORKS AT AFS BEGUMPET AND CAW UNDER GE (AF) HAKIMPET

Amount

Supply and lay XLPE insulated screened PVC bedded , galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of the following sizes including taking out of old U/S cable :-

2x6 Sqmm

2x10 Sqmm

4x16 Sqmm

3.5x25 Sqmm

3.5 x 50 Sqmm

3.5 x 70 Sqmm

3.5 x 95 Sqmm

3.5 x 150 Sqmm

NOTE : Earth work i.e. excavation, Returning, Filling & Removal and necessary cable protection shall be measured and paid seperately.

Excavation in trenches not exceeding 1.5 m in wide and not exceeding 1.5m in depth for laying of cables and getting out in the following types of soil complete all as specified and as directed.

(a) Soft / loose soil

(b) Hard / dense soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

Supply and spreading clean, fine, dry river sand in trenches for cushioning of under ground cable / inside transformer yard complete all as specified and directed by Engineer-in-Charge. Note: Only punned thickness shall be measured for payment purpose.

Burnt Brick sub class 'B' brick dry of size 230x115x75mm laid across trenches for cable protection all as directed

M&L for new galvanized steel tubing, light grade, with all fittings for protection of cable complete all as specified and as directed of following sizes including Taking down unsv GI tubing.

(a) 25mm dia

(b) 32mm dia

(c) 40mm dia

(d) 50mm dia

(e) 80mm dia

M&L for cutting of Exist Road / hard standing upto a depth of 15cm, well ramming to the excavated soil and repair the excavated portion of road/hard standing as existing or by providing suitable mixture of PCC all as specified and as directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type

do but for cable of size 70 to 95 sq mm.

Supply, installation, testing & commissioning of Feeder Pillar Box cubical type, factory made, totally enclosed dust and vermin proof, IP 54, free standing, fully compartmentalized in design suitable for 3 phase, 4 wire, 415 volts, 50 Hz system, with 250 Amps capacity aluminium bus bar, Outdoor type, 3 mm thick CRCA sheet with inspection doors at front & rear side inclusive of necessary locking arrangement, suitable glands, opening for vent and cable entry, with angle Iron of size 40 mm thick including internal wiring with PVC insulated copper cable, grouted in floor complete with the following accessories, duly pre-treated and powder coated finish including taking down old unserviceable panel:- (10 P&S) (a) MCCB, 4 pole 125A, 25 KA- 01 No (Thermal magnetic release, Adjustable type) with rotary switch attachment (b) MCCB, 3 pole 63A, 25 KA- 03 Nos (Thermal magnetic release, Adjustable type). (c) MCCB, 3 pole 32A, 25 KA- 02 No (Thermal magnetic release, Adjustable type). (d) Digital display VAF Panel meter- 01 No. (e) LED Indicator RYB - 01 Set of 3

Supply, installation, testing & commissioning of Feeder Pillar Box cubical type, factory made, totally enclosed dust and vermin proof, IP 54, free standing, fully compartmentalized in design suitable for 3 phase, 4 wire, 415 volts, 50 Hz system, with 600 Amps capacity aluminium bus bar, Outdoor type, 3 mm thick CRCA sheet with inspection doors at front & rear side inclusive of necessary locking arrangement, suitable glands, opening for vent and cable entry, with angle Iron of size 40 mm thick including internal wiring with PVC insulated copper cable, grouted in floor complete with the following accessories, duly pre-treated and powder coated finish including taking down old unserviceable panel:- (Location - Near 12 ASC Bus Bar) (a) MCCB, 4 pole 160A, 25 KA- 01 No (Thermal magnetic release, Adjustable type) with rotary switch attachment (b) MCCB, 3 pole 125A, 25 KA- 02 Nos (Thermal magnetic release, Adjustable type). (c) MCCB, 3 pole 80A, 25 KA- 01 No (Thermal magnetic release, Adjustable type). (d) MCCB, 3 pole 50A, 25 KA- 01 No (Thermal magnetic release, Adjustable type). (e) MCCB, 3 pole 32A, 25 KA- 01 No (Thermal magnetic release, Adjustable type). (f) Digital display VAF Panel meter- 01 No. (g) LED Indicator RYB - 01 Set of 3

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 32x6 mm galvanized iron strip as earth lead, extended upto 7.5 m 'or' upto test terminal point, drawn through 40mm dia light grade GI pipe for protection of galvanized iron strip in the ground, further connecting with suitable size of earth strip to LT Panel, Transformer, DBs etc., including excavation, earth work, magnesium sulphate-50 Kg and charcoal in alternate layers on all sides sorrounding the earth plate, bentonite-25 Kg clay mixed with water and loomy soil sorrounding the plate on all sides, all as specified, PCC chamber, PCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I, including breaking and removing the old unsv earth materials complete all as specified and as directed. NOTE: a) GI Pipe for protection of earthing strip and earth strip beyond 7.5m shall be measured and paid seperately under relevant items.

S&F in repair loop in loop out box made of 2mm thick CRCA sheet with front lockable door, comprising one MCB SP B curve 6 Amps, insulators, connectors etc and fixing on existing steel tubular pole/RCC pole using suitable clamps & nut bolts etc. Note : Quoted rate shall be inclusive of cost of disconnecting existing cable and reconnecting properly.

M&L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable with multistranded copper conductors 1100 volt grade drawn through and including non metallic medium grade rigid PVC conduit accessories including provision of1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor including fabricated steel terminal box made of GI Sheet concealed in walls of suitable size for fixing switches/sockets etc all specifed for:

a) One fan point controlled by one way switch

b) 3 pin socket outlet 5Amp on independent board

Supply & Fix switch socket combination 5A,flush type,single pole,one way

Supply & Fix ceiling rose 65x50 mm Bakelite type,50Hz,230v

Supply & Fix Exhaust fan, AC single phase,230V,50HZ,250 mm sweep with flyguard/louver shutters including suitable size of flexible cable from ceiling rose or connector to exhaust fan and anchoring arrangement in provided space to fix fan all as directed by Eng-in -charge

Supply & Fix Wall mounted fan, AC single phase,230V,50HZ,400 mm including suitable size of flexible cable from ceiling rose or connector to wall mounted fan all as directed by Eng-in -charge Make: Havells

M&L for making hole of 230 mm dia in stone/brick masonry and making good completely all as specified and directed

.Supply and fixing garden light 8 Watt LED fittingNew generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source. including concrete foundation and connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm,including pole junction box cat. part. No BAMBOOBL8WLED830PSYMTOPCM (1.0 M) Make - Havells or equivalent make in Bajaj, Philips .

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge.

Supply & fix sheet metal enclosure MCB distribution board Single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification all as specified and directed.

M&L for MCB single pole, 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

M&L for MCB single pole & neutral 240 volts any rating from 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

Supply and laying XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100V grade with aluminum conductor of size 4 sqmm 2 core complete all as specified and directed by Engr-in-Charge.

M&L for submain wiring with two single core wires of 4.0 sqmm,pvc insulated,unsheathed stranded copper conductor cable FRLS drawn through and including PVC casing caping of suitable size and accessories,ISI marked complete including Earth continuity wire with one run of 4.0 sqmm PVC insulated unsheathed copper cable single core complete all as specified and directed Note :- 2 Runs of 4Sq mm and 1 Run of Earth wire & 1 Run of PVC casing and caping shall be measured as 1 unit.

Supply & Fix SPN Enclosure with 2 pin and earth plug and socket complete with one single pole MCB 20Amp rating

Supply & Fix 35 litre capacity water geyser Make: Havells Product code:GHWAMGTWH035 or its equivalent

Supply & Fix 6-32 Amp MCBs C series Make:Havells,Cat.No:DHMZCSPF006

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/concealed complete with fittings outer diameter 25mm dia all as specified.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/concealed complete with fittings outer diameter 20mm dia all as specified.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/concealed complete with fittings outer diameter 20mm dia all as specified.

S&F CPVC Ball Valve suitable for pipe of of outer diameter 25mm

S&F CPVC Ball Valve suitable for pipe of of outer diameter 20mm

S&F CPVC Ball Valve suitable for pipe of of outer diameter 15mm

S&F PVC connections 15mm size with PTMT nuts of length 300mm

Suplly & Fix steel bib tap of 15 mm dia all as specified and directed

M&L for point wiring complete with 2.5 sqmm single core PVC insulated FRLS cable with multistranded copper conductors 1100 volt grade drawn through and including non metallic medium grade rigid PVC conduit accessories including provision of 2.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor including fabricated steel terminal box made of GI Sheet concealed in walls of suitable size for fixing switches/sockets etc all specifed for:

a) 3 pin socket outlet 15Amp on independent board

Supply & Fix switch socket combination 2in1,3pin,5 and 15 Amp flush type universal

Supply & Fix SPN 8 way Double door Sheet metal enclosure for DB's when MCBs to be used

Supply & Fix SP 6-32 Amp MCBs C series Make:Havells,Cat.No:DHMZCSPF006

Supply & Fix SPN 40 Amp MCBs C series Make:Havells,Cat.No:DHMZCSNF040

supply &fix submain wiring with two single core wires of 6 sqmm,pvc insulated,unsheathed stranded copper conductor cable FRLS drawn through and including PVC conduit of suitable size and accessories,ISI marked complete including Earth continuity wire with one run of 6 sqmm PVC insulated unsheathed copper cable single core complete all as specified and directed. Note :- 2 Runs of 6 Sq mm and 1 Run of Earth wire & 1 Run of conduit shall be measured as 1 unit.

Supply only new Desert Cooler with tank capacity of 115 Liters, power consumption with cooling = 185 Watts, power requirement = 230 volts, Single phase, 50 Hz, dimensions = 70.7 cm x 128.8 cm x 48 cm with 16.2 Kg overall weight, Plastic body, three speed fan setting, with 04 Nos Castor Wheels and 04 No legs for easy movement, cooling media = 03 side honeycomb pads, operating mode = cooling mode & swing mode, with ice chamber, with auto louver movement, with water level indicator, dust filter & ionizer, with provision of 05 Amps 3-pin plug with proper earth connection with one year overall warranty on Desert Cooler complete. Make : Symphony, Model- Sumo 115XL or as per approval of Engrineer-in-charge complete all as specified & as directed by the Engineer-in-Charge.

Supply, instal, testing & commissioning of submersible pump set, electrical driven, motor rating 2.2 KW / 3 HP with not less then 245 meter discharge head, suitable for minimum well diameter 100mm, 32 to 50 mm dilivery size, alongwith non return valve, erection clamp, 3 meter copper conductor synchronous type B, suitable for power supply 400 Volt, 50 HZ, Three Phase, Starting method : DOL, 2900 RPM speed including suitable DOL Starter with mounting arrangement in Sheet Enclosure (with locking arrangement) mounted on 2 Nos. of 1.2m long, 40x40x5mm size angle iron stand (with two coats of metal paint) duly grouted in PCC 1:4:8,and minimum 2 years warrenty complete on pump set and starter. The rates are inclusive of testing of pump at borewell installation for satisfactory functioning / running all as specified and directed by Engineer - in - Charge. Make:-a)Submersible pump set (Make : KSB, Specification : 2.2KW/3HP/2900RPM, Model CORA 2C-45+UMA/100-2.2/22 or as approved by Engineer - in - Charge. b) DOL Starter :- Brand : Schneider, Specification : Item Code- 325431SNI, CatRef- MS13RJ12N5, HSN- 85369010, Sub Brand- TE Starter,Type- TRS, Auto Reversing, HP Rating- 3 HP, Voltage Rating- 415 VAC, Phase- 3, Frequency Rating- 50/60 HZ, Thermal Protection Range- 4 - 6 A, Motor Power Supply- 415 VAC, 50/60 HZ, Fuse Type- 16 A HRC Dimension - 348 mm width x 272 mm height x 135 mm depth or as per approval of Engrineer-in-charge.

Supply and install submersible pump set, electrical driven, motor rating 3.7 KW / 5 HP with not less then 355 meter discharge head, suitable for minimum well diameter 100mm, 32 to 50 mm dilivery size, alongwith non return valve, erection clamp 3 meter copper conductor synchronous type B, suitable for power supply 400 Volt, 50 HZ, Three Phase, Starting method : DOL, 2900 RPM speed including suitable DOL Starter with mounting arrangement in Sheet Enclosure (with locking arrangement) mounted on 2 Nos. of 1.2m long, 40x40x5mm size angle iron stand (with two coats of metal paint) duly grouted in PCC 1:4:8,and minimum 2 years warrenty complete on pump set and starter. The rates are inclusive of testing of pump at borewell installation for satisfactory functioning / running all as specified and directed by Engineer - in - Charge. Make:- a) Submersible pump set (Make : KSB, Specification : 3.7KW/5HP/2900RPM, Model CORA 2C-65+UMA/100-3.7/22 or as approved by Engineer - in - Charge. (b) DOL Starter :- Brand : Schneider, Specification : Item Code- 325432SNI, CatRef- MS13RJ14N5, HSN- 85369010, Sub Brand- TE Starter,Type- TRS, Auto Reversing, HP Rating- 5 HP, Voltage Rating- 415 VAC, Phase- 3, Frequency Rating- 50/60 HZ, Thermal Protection Range- 5.5 - 8 A, Motor Power Supply- 415 VAC, 50/60 HZ, Fuse Type- 20 A HRC, Dimension - 348 mm width x 272 mm height x 135 mm depth or as per approval of Engrineer-in-charge.

Supply & fix, Flat Cable PVC insulated & sheathed, multi-stranded copper conductor, water proof suitable for submersible pumpset upto 5 HP, 3 core flat submersible cable 1100 V with 4.00 SQ MM conductor area and conductor construction multistrand (No/Dia mm) not less then 56/3 complete all as specified & as directed by the Engineer-in-Charge. Make: Polycab/Finolex/RR KABEL/HPL/Indo-Asian/Havell or as per approval of Engrineer-in-charge.

Supply & fix GI column pipe, heavy grade, 40 mm dia, with ISI mark, with heavy duty GI Socket at one end and other fittings as required for complete fixing all as specified & as directed by the Engineer-in-Charge. Make:TATA/JINDAL

Supply & fix GI column pipe, heavy grade, 50 mm dia, with ISI mark, with heavy duty GI Socket at one end and other fittings as required for complete fixing all as specified & as directed by the Engineer-in-Charge. Make:TATA/JINDAL

Material and labour for cutting road/hard standing not exc. 0.60 mtr wide and not exc. 0.25 mtr deep for laying and taking out water pipe line including making good the disturbed portion as per existing earlier complete all as specified and as directed.

S&F Non Return Valve, Gun metal, 40 MM dia complete all as specified & as directed by the Engineer-in-Charge including taking down old u/s valve. Make: Kirloskar/BIR/JOLOTO/TIGER.

S&F Non Return Valve, Gun metal, 50 MM dia complete all as specified & as directed by the Engineer-in-Charge ncluding taking down old u/s valve. Make: Kirloskar/BIR/JOLOTO/TIGER.

Supply and laying GI tubing medium grade ISI marked with all fittings, laid in trenches complete all as specified and as directed for the following sizes :- Make:TATA / JINDAL / PRAKASH.

(a) 40 mm dia GI tubing

(b) 50 mm dia GI tubing

Supply & fix in repairs Gun metal globe/gate valve ISI marked high pressure with iron wheel head screwed both ends for iron pipe line and fixed properly of following sizes including taking out unserviceable gun metal gate valve:- Make: Zoloto / Leader / Tiger / Cresent.

(a) 40 mm dia bore

(b) 50 mm dia bore

Construction of valve chamber having inner dimension 600 x 600 x 600 mm (suitable for gate valve upto 50mm) with PCC 1:4:8 type D2 for foundation, brick work wall in cement mortar (1:4), PCC 1:2:4 type B1 for coping, rendering plaster in CM 1:4, 15 mm thick including provision of MS Sheet top cover 3 mm thick with brazing of MS flat of size 25 mm x 4 mm at edges and in diagonal and angle iron base frame of 40 x 40 x 5 mm, painting with two coat of synthetic enamel paint over a coat of red oxide primer on iron surfaces, lime wash on internal and external cement surfaces and locking arrangements including demolition of the existing chamber, necessary excavation earth work complete all as specified.

Srinivash Engineers

STANDARD AGENCIES

DWARKA PERSHAD RADHEY RAMANLAL

M/S - KRUPA ELECTRICALS

K.K.Enterprises

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd