REPAIR MAINT OF STORE YARD OF BR EM BS AND EM INSTALLATIONS OTM AND RESIDENTIAL ACCN INCL REPAIR MAINT OF CERTIAN DRAIN FOOTPATH SECURITY FENCINGG AND MISC BR WORKS IN TECH AND RESI ACCN AT R AND D E ENGRS DIGHI

Amount

PART-I REPAIRS TO STORE YARD Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, of any gauge and thickness complete.

All as per Item No 1 but steel roof sheeting complete.

M&L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified including corrugated ridge sheeting complete.

All as per Item No 3 but withot material (refixing only)

Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thick (below or above ground level)

M&L for cement concrete type 1:2:4 using 20mm graded stone aggregate as in coping concrete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L for Cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in foundation filling and mass concrete.

S&F Rolled mild steel in plates (Plain) square cut or notched (ordinary and colour sunk) forming holes, without any attachment conf to Fe 290 (Gde E-165)

S&F rolled mild steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc.,conf to Fe 290 (Gde E-165)

S&F rolled mild steel in purlins /rafters of channels, angles or tee sections, fixed with MS angle cleats,plates etc incl all necessary welding , bolting etc. independently without connecting plates, etc.,conf to Fe 290 (Gde E-165)

Preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm

Taking down shutters of any decription fixed in any position area exc 1 sqm but nexc 2sqm each

S&F plain, solid, straight chowkats and frames made of 2nd class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F MS hold fasts conforming to Fe -410 as directed by Engineer In Charge

M&L for cement concrete as in bed plates Type B0 1:2:4 using 12.5mm graded stone aggregate

M&L for treating small articles such as hold fasts with tar or coal tar black paint incl preparation.

S&F Glazed and skeleton shutter 35mm thick open rebeted prepared to recived glass without sash bar complete all as per specified and doirected

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels and one face is covered with decoretive face veneer with lipping / frame to matchcommercial type on both sides

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in oppining as per specification and drawing.

S&F factory made solid panel PVC shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stylies and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stylie & rails with sutailble PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification and drawings.

S&F Mild steel cold rolled Butt hings 100 mm medium weight

S&F Aluminium, anodised barrel tower bolt 200 mm

S&F Aluminium alloy , anodised sliding door bolt with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed 300 mm

S&F Aluminium handles fabricated type 150 mm

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Dismantling of wooden partions including timder frame work complete.

S&F anodised aluminium frame for doors, windows, partitions and ventilators with one or more rebates including necessary jointing cleat for fixing etc complete all as specified.

S&F anodised aluminium window and ventilator shutter shuttersliding type without sash bar , aluminium section weighing 0.55 Kg/Mtr including necessary jointing cleat glazing clips rubber packing anodised aluminium snap beading screws, rollers, locks etc complete all as specified.

M&L for sheet glass ordinary quality 4 mm thick fix in Aluminium window/vent shutter area exc 0.50SqM in each pane

5mm thick printed colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.

S&F in repairs 12mm thick Prelaminatd particle board, interior grade, prelaminated both side with decorative choice lamination , fixed for aluminium partion, doors etc

S&F 3mm thick figured glass, ordinary quality and glazing for ventilators in square in n. exc 0.5 sq.m in each pane

S&F Framework such as M.S. Round/square bars as in guardbars, railing etc complete Gde Fe 410.

M&L for 75mm thick cement concrete type C2 1:3:6 using 40mm graded aggregate as in flooring/ plinth protection finished even and smooth without using extra cement.

Material and labour for 100mm thick PCC 1:2:4 type B-2 as in floor/ hardstanding finished surface even & fair without using extra cement.

Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade A

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and cemented in any mortor

S&F granite 18 to 20mm thick of any type, table rubbed and polished in steps, jambs pillers, window cill, cooking platform and like in cement morter 1:4 incl pointing in white cement

M&L for Machine cut kota stone slab as in flooring and skirting 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Semi circular Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for Machine cut cudappa stone slab as in flooring and skirting 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for 15mm thick screed bed below stone slabs or tiles in CM 1:6 complete

M&L for rendering 15mm thick as backing coat in CM 1:4 complete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Double charged Vitrified tiles as in flooring and skirting of size exc 0.18 sqm but n exc 0.38 sqm 9 to 10mm thick set and jointed in neat cement slurry and pointed in coloured pigment including 15mm thick screed bed in CM 1:6 all as specified and directed.

All as per Item No 50 here in before but coloured non skid ceramic tiles complete

All as per Item No 50 here in before but size n exc 0.18 sqm coloured non skid ceramic tiles complete

M&L for Glazed ceramic tiles in vertical surface of size 600/450mmX 300mm X7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete

Taking down cement plaster on walls and roof ceilings etc, including racking out joints, hacking for key, scrubbing down with water etc to receive new plaster

Demolition of Brickwork or PCC block masonary, stone/bou-lder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 (Sagol Finish)

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using WPC @3% by the weight of cement Note: WPC shall be measured and paid seperatly

M&L for Rendering 20mm thick in two coats (15mm + 5mm) on fair faces of stone masonry surfaces in CM 1:4 using WPC on second layer @3% by the weight of cement Note: WPC shall be measured and paid seperatly

M&L for Rendering 20mm thick in two coats on fair faces of stone masonry surfaces in CM 1:6 (sagol finish).

M&L for PCC block masonry with soild blocks Type C1 1 :3:6 (20 mm gr agg) exc 10 cm in width and setting in CM 1 :6

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6

All as per Item No 61 here in before but except stones

M&L for preparation of newly plastered wall surface and applying two coats of cement based paint over a coat of alkaline resistant primer complete

M&L for preparation of newly plastered wall surface and applying two coats water based distemper over a coat of primer complete

M&L for preparation of newly plastered wall surface and applying three coats of white wash complete

M&L for plastering 5mm thick in CM 1:3 over ceiling on concrete surface and finishing the plastered surface fair and even without using extra cement complete.

All as per Item No 65 here in before but over ceiling complete

M&L for preparation of old decorated wall surface and applying one coat of cement based paint

M&L for preparation of old decorated wall surface and applying one coat of water based distemper

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

M&L for sheet glass ordinary quality 4 mm thick fix in window/vent shutter area n exc 0.50SqM in each pane

M&L 3 mm th Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples

Dismantling of water tanks and removing to store capacity of tank is exc 500 ltr and n exc 1000 ltr.

Dismantling of water tanks and removing to store capacity of tank is exc 250 ltr and n exc 500 ltr.

Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical verticle with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity (ISI Marked)

All as per item No 76 above but capacity 500 Ltrs

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15 mm bore to walls, ceiling etc

Ditto all as per item No 78 here in before but 20mm dia pipe

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc

Ditto all as per item No 80 here in before but in 20mm bore pipe

Refixing of old steel tubing and connection in new or old positions ( walls,ceiling, laid in floor) dia of pipe 15mm.

Ditto all as per item No 82 here in before but in 20mm dia pipe.

S&F in repairs 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

Ditto as 84 above but 20 mm bore pipe.

S&F in repairs Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe)

S&F in repairs stop valves / angle cock cast copper alloy screwed down high pressure with crutch or butter fly handlescrewee both ends for iron pipe or for unions, chromium plated with long shank and cup

S&F in repairs vitreous China wash down water closet (pedestal pattern) white colour including plastic seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed

S&F in repairs 10Litres capacity flushing cistern PVC valveless, syphonic action type, flushing cestern, low level, white, with inlwt, ball valve, float and handle including brackets, fixed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device

S&F flushing pipe of 32mm dia for low level cistern etc complete

S&F PVC connection 450mm long with check nut for wash hand basin etc complete

S&F Vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porclelain stopper but excluding brackets and including fancy type 15mm bore CP long shank and neck pillar tap, CP stop cock, 450mm connection pipe in repairs

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type),size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), including 15mm bore Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-50gms), 32mm bore Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms)

S&F in repairs gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20mm bore pipe.

Ditto all as per item No 95 here in before but 25mm bore pipe.

S&F PVC (SWR) Floor floor trap with grating including jointing to waste pipe with solvent cement for 75mm dia of outlet.

S&F in repairs Stainless steel sink in repairs with drainage board Stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F in repairs bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore.

Supply only Integral water profing compound

S&F in repairs PVC water tank covers suitable for 500 lits/ 1000 lits water tanks including necessary clips, pins etc Make: Syntex, Ashish, Rotex

M&L for taking down old steel window shutters from frame for repair work and refixing in same position using new MS box type hinges, missing handles, stays etc including making good to damaged cement plastered surface with painting work and similar works during repairing without any extra cost

M&L for easning of existing steel windows/ ventilator shuttres using grease or oil

PART-II REPAIRS/REPLACEMENT OF CERTAIN DRAINS Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of Brickwork or stone/boulder masonry, built in cement mortor incluning all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6

All As per Item No 03 here in before but except stones. Note : Stones shall be used obtained from demolition

M&L for PCC block masonry with soild blocks Type C1 1 :3:6 (20 mm gr agg) exc 10 cm in width and setting in CM 1 :6

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and making the surface even and fair without using extra cement complete.

M&L for Rendering 20mm thick on fair faces of stone work or concrete surfaces (in two layers 15 + 5mm) in CM 1:4 and making the surface even and smooth without using extra cement complete.

Dismantling fencing wire mesh, any type, size, shape and thickness etc complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Demolition of cement cocrete in post holes plan area n exc 0.25 cum and trimming the sides of holes to receive new cement concrete.

Supply only PVC coated Chain link MS galvanised fencing, of size 50mm x 50mm, weight not less than 2.2 kg/sqm complete.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F rolled mild steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc.,conf to Fe 410-W (Gde-E-250) quality 'B'.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard / dense soil, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L for Cement concrete 1:3:6 (using 40mm graded stone agrregate) type C2 in foundations, filling and mass concrete

Demolition of cement concrete on ground floor and pavings n exc 15cm tthickness

Demolition of reinforced cement concrete on ground floor and pavings n exc 15cm tthickness

M&L for cement concrete 1:2:4 (using 40mm graded stone agrregate) type B2 in surface channels and drains including rounding and chamfering to edges complete

M&L for cement concrete 1:2:4 (using 20mm graded stone agrregate) type B1 as in coping concrete.

S&F precast reinforced cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) drain cover slabs supprted on walls complete.

TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Cleaning of storm water drains from mud, vegetatation, debries etc from drains and removing n exc 50m from the starting point and levelled as directed by Engineer In Charge, incluning Removing and placing of precast cement concrete drain covers carefully (without damaging) after cleaning / reapair works complete.

Dismantling of Stone slabs, tiles and interlocking tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed in cement mortor

All as per Item No 25 here in before but laid, bedded and pointed in any mortor

M&L for rubber moulded glazed Machine pressed precast concrete interlocking paver block with white cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid and bedded on 50mm thick (compacted thickness) levelled sand all as specified and directed.

M&L for Chequered cement concrete tiles with white cement and pigment 25cm x 25cm x 22 to 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM 1:6 complete.

M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)

All as per Item No 29 here in before but type D-2, 1:4:8

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

labour only for Restraining and resecuring including making good staples etc. to barbed wire fencing complete

All as per Item No 32 here in before but for concertina coil of any dia and descripetion

S&F in repairs razor edge concertina coil 910mm dia (51 spiral per coil), weight apprx 12 kg (+/- 5%), expandable upto 8 to 10mtrs consisting of 2.6mm dia heavy galvanised high tension spring steel wire as pr IS 4454, medium barbs made of 0.5mm thick low carbon heavy galvanised cold rolled steel sheet as per IS 513, heavy duty steel clip as per IS 2062 and epoxy resin coating for anti corrosion, complete all as specified and directed.

Taking down for repairing and refixing in new or same position of chainlink fencing of any shape and size including fencing posts and horizontal supporting bars, fillets, bolt and nuts etc complete all as specified and directed (Note: replacement of any old materials by new one will be measured and paid in relevant items of this schedule.)

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A

Mukund Engineers and Contractors

R K ENTERPRISES

M/S VR Construction Services

GGS Infra

DAKSH ENGINEERS AND BUILDERS

S.K.HARAL