CWE/GGN/FT-75/2025-26 INTEGRATED COMPLAINT MANAGEMENT SYSTEM FOR DAY TO DAY COMPLAINTS AND COMPREHENSIVE MAINTENANCE IN NARAINA CAMP AND NARAINA HILL TOP STATION UNDER AOR OF GE (AF) FARIDABAD

M&L for repair to arresting the leakages of bib taps, pillar cock, stop cock, PVC connection, waste pipes, angle valve, concealed valve, Re-fixing of bottle trap etc by changing the washers or any other minor accessories complete all as specified and directed by Engr-in-Charge.

M&L for Repairing to adjustment the float valve without replacement of any part in the OHT of any size complete all as specified and directed by Engr-in-Charge.

M&L for repair to Removal of air lock/blockage of water in GI Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete all as specified and directed by Engr-in-Charge.

M&L for Cleaning of water tank, duly removing all scale, dirt or mud, fungus etc and washing and flushing the tank with chlorine water for the capacity of tanks 500 litres to 1000 litres of RCC or PVC tanks including writing the letters on PVC or RCC tank as cleaned on duly mentioning date of cleaning with paint as directed by Engr-in-charge.

M&L for Cleaning of water tank, duly removing all scale, dirt or mud, fungus etc and washing and flushing the tank with chlorine water for the capacity of tanks 250 ltrs to 500 ltrs of RCC or PVC tanks including writing the letters on PVC or RCC tank as cleaned on duly mentioning date of cleaning with paint as directed by Engr-in-charge. NOTE FOR SL ITEM NOS 4 & 5: While cleaning any parts of the water tanks was broken / damaged the same shall be replaced by the contractor without any extra cost to the department.

M&L for rectification of leakage in 20/25mm bore CPVC pipe lines, joints and repair by re fixing serviceable fittings and replacement of unserviceable fittings such as socket, elbow, Tee, union, reducer etc complete all as specified and as directed by Engineer-in-Charge.

Repair 15mm dia concealed stop cock cover chromium plated with long screw down high pressure with crutch or butterfly handle screwed both end for iron pipe complete all as specified and directed by Engr-in-Charge.

Repair brass concealed face to reuired size (full turn or half turn) to 15 mm dia angle cock/ stop cock/ bib cock/ sink mixer/ wall mixer/ WHB Mixer for short body/ long body, complete all as specified and directed by Engr-in-Charge.

Repair CP concealed face cover to reuired size to 15 mm dia angle cock/ stop cock/ bib cock/ sink mixer/ WHB Mixer/ wall mixture for short body/ long body complete all as specified and directed by Engr-in-Charge.

Repair brass concealed face to reuired size (full turn or half turn) to 20 mm dia angle cock/ stop cock/ bib cock/ sink mixer/ wall mixer/ WHB Mixer for short body/ long body complete all as specified and directed by Engr-in-Charge.

Repair CP concealed face cover to reuired size to 20 mm dia angle cock/ stop cock/ bib cock/ sink mixer/ WHB Mixer/ wall mixture for short body/ long body complete all as specified and directed by Engr-in-Charge.

S&F 500 Litre capacity three layered rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20 mm dia GI pipe medium grade washout pipe of 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe of 600 mm long with all fittings including dismantling/ taking down of the existing tank, complete all as specified and directed by Engr-in-charge.

S&F 1000 Litre capacity three layered rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20 mm dia GI pipe medium grade washout pipe of 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe of 600 mm long with all fittings including dismantling/ taking down of the existing tank, complete all as specified and directed by Engr-in-charge.

S&F in repair 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair 25mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete.

S&F in repair gun metal gate valves with iron wheel head 15 mm, complete all as specified and as directed by Engr-in-Charge.

S&F in repair gun metal gate valves with iron wheel head 20 mm, complete all as specified and as directed by Engr-in-Charge.

S&F in repair gun metal gate valves with iron wheel head 25 mm, complete all as specified and as directed by Engr-in-Charge.

S&F, jointing and testing galvanized steel water tubing 15 mm bore (dia) (ISI Marked), medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall with concealed pipe work, ceiling or laid in floors or any other situation including taking up or down existing steel tubing/ PPR pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F, jointing and testing galvanized steel water tubing 20 mm bore (dia) (ISI Marked), medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall with concealed pipe work, ceiling or laid in floors or any other situation including taking up or down existing steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F, jointing and testing galvanized steel water tubing 25 mm bore (dia) (ISI Marked), medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall with concealed pipe work, ceiling or laid in floors or any other situation including taking up or down existing steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F, jointing and testing of CPVC pipes of outer dia 20 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all plain fittings such as bends, elbow, socket, reducer etc including taking up or down eixsting steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F, jointing and testing of CPVC pipes of outer dia 25 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all plain fittings such as bends, elbow, socket, reducer etc including taking up or down eixsting steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F in repair, 20 mm outer dia CPVC brass elbow female, complete all as speicified and directed by Engr-in-Charge.

S&F in repair 20 mm outer dia CPVC brass female Tee, complete all as speicified and directed by Engr-in-Charge.

S&F in repair 20 mm outer dia CPVC male brass threaded adaptor (MBTA), complete all as speicified and directed by Engr-in-Charge.

S&F in repair 20 mm outer dia CPVC Female brass threaded adaptor (FBTA), complete all as speicified and directed by Engr-in-Charge.

S&F in repair 25 mm outer dia CPVC male brass threaded adaptor (MBTA), complete all as speicified and directed by Engr-in-Charge.

S&F in repair 25 mm outer dia CPVC Female brass threaded adaptor (FBTA), complete all as speicified and directed by Engr-in-Charge.

S&F in repair 15 mm dia bore CP Bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm dia bore CP two in one bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair of Wall mixture of telephonic 15mm bore dia cast copper alloy with chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge. Make - Hindware, cera, Parryware, Marc or Equivalent makes mentioned in list of Approved Makes

S&F in repair sink mixer of 15mm dia telephonic type mixer cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down complete all as specified and directed by Engr-in-Charge. Make: Hindware, Cera, Parryware, Marc or Equivalent makes mentioned in list of Approved Makes

S&F in repair basin mixer of 15mm dia cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down complete all as specified and directed by Engr-in-Charge. Make: Hindware, Cera, Parryware, Marc or Equivalent makes mentioned in list of Approved Makes

S&F in repair, 15 mm dia bore swan neck pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair 125 mm fancy type shower rose brass chromium plated with CP arms of 30 to 60 cm long for 15mm bore GI pipe complete all as specified and directed by Engr-in-charge.

S&F in repair of 15mm dia telephonic hand shower of long 200 mm to 300 mm cast copper alloy fancy type screwed down complete all as specified and directed by Engr-in-Charge. Make: Cera/ Marc/ Hindware or Equivalent makes mentioned in list of Approved Makes

S&F in repair 15 mm dia bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup complete all as specified and directed by Engr-in-charge.

S&F in repair Health Faucet with 1.50 mtr long SS tube and stand/ hook, complete all as specified and directed by Engr-in-charge. Make : Cera, Hindware, Parryware, Marc or Equivalent makes mentioned in list of Approved Makes

S&F in repair PTMT flush handle with adjustable lever and hook for low level flushing cistern complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china squatting pan “Orissa pattern” of size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc necessary concrete bedding and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern)or white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc and making good the disturbed surfaces of floor complete all as specified and directed by Engr-in-charge.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern white with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed by Engr-in-charge.

S&F in repair water closet seat cover white colour closed pattern with flat bottom covered and mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.

S&F in repair PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and directed by Engr-in-charge.

S&F in repair 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-charge.

S&F in repair of Sink with draining board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1050x 460x bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.

S&F in repair of Sink with out board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495x 420x bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.

S&F in repair of PVC siphon flush kit with all fitting accessories single flush tank kit for cistern tank, complete all as specified and directed by Engr-in-Charge.

S&F in repair of floor /wall mounted western toilet/commode S/P trap square type seat in built in single piece white water closet (EWC) including complete all fittings cmplete all as spd and directed by EIC Make:Linum Ceramic/Cera/Hindware or Equivalent makes mentioned in list of Approved Makes

M&L in repair PVC (SWR) nahani trap of 75 mm diameter of outlet, with PVC 150x150 mm size openable at center, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete in all respect as specified and directed.

S&F in repair high quality Stailess steel (Grade 304) anti-cockroach and reptile-resistant drain gratings (Jallis) for bathroom/ Kitchen flor drains of size 4 to 6 inch in dia. The gratings shall feature a self-closing flap mechanism to prevent the entry of cockroaches, lizards, and other pests while allowing smooth water flow. They must be corrosion-resistant, durable, and compatible with standard drain sizes. The design should allow for easy cleanign adn maintenance. Note:- only ISI Marked or equivalent certified producrts shall be accepted.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down the existing unserviceable pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 75/ 63 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down the existing unserviceable pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 32/ 40 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down the existing unserviceable pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 110 mm bore dia PVC bend, complete all as specified and directed by Engr-in-charge.

S&F in repair 75/ 63 mm bore dia PVC bend, complete all as specified and directed by Engr-in-charge.

S&F in repair 32/ 40 mm bore dia PVC bend, complete all as specified and directed by Engr-in-charge.

S&F in repair 110 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all specified and directed by Engr-in-charge.

S&F in repair 75/ 63 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all specified and directed by Engr-in-charge.

S&F in repair 32/ 40 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all specified and directed by Engr-in-charge.

S&F in repair 32 mm bore dia PVC waste pipe fixing to sink/ WHB coupling, complete all as specified and directed by Engr-in-Charge.

S&F in repair 32 mm bore dia PVC roll waste pipe fixing to sink/ WHB as per requirement, complete all as specified and directed by Engr-in-Charge.

S&F for repairs by taking down wooden/ PVC door shutters, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of fittings and refixing on the same opening complete all as specified and directed by Engr-in-Charge. Note:- New hinges, if required will be measured and paid under separate item.

S&F for repairs by taking down aluminium door shutters exceeding 1.5 Sqm and not exceeding 4.00 Sqm of any description, tightening of all screws, repair of floor spring with necessary minor fittings and refixing in the same opening complete all as specified and directed by Engr-in-Charge.

S&F for repairs by taking down aluminium window/ventilator shutters not exceeding 1.5 Sqm of any description, tightening of all screws replacement of hinges, necessary fittings and refixing in the same opening complete all as specified and directed by Engr-in-Charge. (Note:- New fittings if required will be measured and paid under separate item).

S&F aluminium colour powder coated Frame and Partition for Cubicals with glazed/pre laminated particle board panels fabricated including aluminium powder coated beading, rubber gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following :- (a) Aluminium colour powder coated frame section 101.60x44.45x1.93 mm fixed as per spd, Make- Jindal or Equivalent makes mentioned in list of Approved Makes (b)12 mm thick prelaminated particle board (pre laminated both face) exterior grade ISI Marked . (c) Tinted glass/Plain glass 5mm thick Make : Saint gobain/modigaurd. Note: If ground requirement for full glass or full Prelaminated particle board Panel contractor should provide as per direction of Engr-in-C.

S&F for repairs of loose glass pane having area n exc 0.25 sqm of steel /wooden window including re fixing in position with glass putty complete all as specified and directed

M&L for Resecuring or easing & adjusting of shutters of any description not exceeding 2 Sqm in each pane and refixing in same opeining complete all as specified and directed by Engr-in-Charge.

M&L for Resecuring or easing & adjusting of shutters of any description not exceeding 1 Sqm in each pane and refixing in same opeining complete all as specified and directed by Engr-in-Charge.

S&F in repair aluminium alloy door seal of size 1 metre long fixed to wooden doors complete all as specified and directed by Engr-in-Charge.

S&F in repair 300 mm ordinary rat tail rod pattern, brass door spring including roller & roller plate fixed complete of any size complete all as specified and directed by Engr-in-Charge.

S&F in repair aluminium floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber shoe with over all length of cover plate 140mm complete all as specified and directed by Engr-in-Charge.

S&F in repair kitchen plate rack of size 31"x30"x10 to 12" inch made of stainless steel 1 mm thick fixed on the wall with plugs, nuts & washers, complete all as specified and directed by Engr-in-charge.

S&F in repair aluminium anodised tubular towel rail of 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F in repair bevailed frameless wall mounted mirror colour of silver B fixed with wall bolting arangement of size 600 x 900 mm of good finish, complete all as specified and directed by Engr-in-Charge.

S&F in repair 4 to 6 mm thick electrical looking mirror of rectangular/ square/ oval/ circular shape of size exc 0.27 sqm but not exc 0.45 sqm with three light mode as required including all fittings and make good of all surface, complete all as specified and directed by Engr-in-Charge.

S&F in repair toilet paper holder of size 13 cm x 13 cm x 7 cm chromium plated of glossy finish fixed to wall with chromium plated brass screw complete all as specified and directed by Engr-in-charge.

S&F in repair Soap dish of brass chromium plated of oval shape of cost not less tha Rs 150.00 fixed to wall with brass chromium plated screws complete all as specified and directed by Engr-in-charge.

S&F in repair stain lesssteel curtain rod of 20/25mm dia fancy type including MS bracket, side knob, corner bracket etc complete all as specified and directed by Engr-in-charge.

S&F in repair, MS moritce lock 4 levers of vertical type size 100mm, complete all as specified and directed by Engr-in-charge

S&F in repairs, cast iron drawer handles fancy type projection drop (50mm to 65mm) on screwed plate, complete all as spd and directed by Engineer in Charge.

S&F in repair, knobs for cub board fixed in nut screw and washers of mild steel, complete all as specified and directed by Engr-in-Charge.

S&F in repair, hasp and staples 100mm long alluminium anodised, complete all as specified and directed by Engr-in-Charge.

S&F in repair, gate and shutter hooks of and eyes of 75 mm mild steel, complete all as specified and directed by Engr-in-Charge.

S&F in repairs, wooden beading of length 1 mtr to 1.2 mtr and 10 to15 mm thick, to fixing of wire mesh, complete all as specified and directed by Engr-in-charge.

S&F in repairs, alluminium beading of length 1 mtr to 1.2 mtr and width 10 to15 mm of 2 mm thick, to fixing of wire mesh and glass pane, complete all as specified and directed by Engr-in-charge.

S&F in repair, polyrubb black glazing rubber beading to fix glass and width 10 to 20mm and glass pane complete all as specified and directed by Engr-in-charge.

S&F in repair, corner glass shelf of 300 mm long fixed on the wall with nuts & washers, complete all as specified and directed by Engr-in-charge.

S&F in repair, glass shelf 450 mm long on wall with screws and making good surface of wall, complete all as specified and directed by Engr-in-charge.

Taking down chowkat or frame with shutter (without taking out shutter from the frame) not exc 1.50 Sqm each as doors, windows & ventilators etc. and removal from site, complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing mentioned in SSR, complete all as specified and directed by Engr-in-charge.

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings and complete all as specified and directed by Engr-in-charge.

S&F aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-charge.

S&F of aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-charge.

S&F of 100 mm extrded aluminium alloy handles, fabricated type anodised, complete all as specified and directed by Engr-in-Charge.

S&F of 150 mm extrded aluminium alloy handles, fabricated type anodised, complete all as specified and directed by Engr-in-Charge.

S&F aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section complete all as specified and as directed by Engineer- in- Charge.

S&F in repairs, prelaminated particle board of 18/ 19mm thick exterior grade both sides with decorative face with veneer on both sides using cub bords finished with fixed with screws to timber frame, complete all as specified and directed by Engr-in-Charge.

S&F in repair, continious (piano) hinges, MS bright finish or electro galvanised 30 mm width of flaps(when open), complete all as specified and directed by Engr-in-charge.

S&F in repair, 4 mm thick sheet glass for window/ ventilators ordinary quality and glazing with rubber beading/oil putty in square exc 0.50 Sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F in repair, 4 mm thick figured glass for window/ ventilators ordinary quality and glazing with rubber beading/oil putty in square exc 0.50 Sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F in repair, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-charge.

S&F in repair, aluminium die cast of door closer hydraulically regulated designed No 3 universal type suitable for door shutter size of 850 mm to 1000 mm in width weight between from 61 to 80 kg and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body governing pivot made of brass,other parts made of mild steel heavy duty and fixed Complete all as specified and directed.

S&F in repair railing rubber 50 mm width (rubber insert for railings), made from high-quality, UV-resistant, weatherproof EPDM rubber or equivalent, suitable for indoor and outdoor use, the rubber insert shallbe designed to fit securely into meal railing grooves, prividing cushioning, aesthetic finish and safety, complete all as specified and directed by Engr-in-Charge.

S&F in repair luxury bathroom vanity washbasin cabinet with mirror floor/ wall mounted, mouveable or fixex with drayers as per site requirement with 32 mm dia brass chromium plated waste fitting including granite stoen thickness 18-20 mm of desired colour and fancy type CP pillar tap/ mixer and all fittings as required at site for smooth functioning, making good disturbed surfaces in cement mortar 1:3 and fixed, complete all as specified and directed by Engr-in-Charge.

S&F of Oil-resistant, Re-positionalble and Eco-friendly strain resistance colour wall paper including fixing with adhesive and cutting to required shape complete in all respect to the satisfaction of Engr-in-charge and also adhere to below specifications:- (a) All wall paper to be erected from floor to the bottom of the ceiling or as specified. (b) All opening for the cutout for ducting/ raceways/ cables etc, in the partition to be closed and made air tight. (c) Disposing waste material from the site.

S&F in repair 5mm thick Plain colour PVC wall lining consisting of PVC sheet inclusive of Solvant Cement and fixing at site on PVC frame all as Specified and as directed

S&F 35x5mm PVC Fillet PVC Sheet fixed for wall panelling all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.

S&F of framed work such as grills gratings, iron plates, etc with ends of bars shouldeed and or roveted or forged into spikes; framed guard bars barred iron doors ladders framed balusters walk way railing framework of Fe-410-0 or Fe-310-0, complete all as specified and directed by Engr-in-Charge.

S&F Welded steel wire fabric supplied and fixed, complete to wood or steel menbers not exc 4.00 kg per sqm, complete all as specified and directed by Engr-in-Charge.

S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for factory made 30mm Thick MOLDED WPC with decorative surface 2m thk Moulded wood grain printed Prelam PVC sheet on front face and 2mm thk PVC sheet on back side, 100 % Solid door ( Conforming As Per IS : 4020 ) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side palin with density not less than 600 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be Water Proof , Termite Proof , Fire Retardent and having screw holding capasity.Fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screwsi ncl Aluminum Jali and Stainless wiremess and other assories as per required. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as sprceified and directed by Engr-in-Charge.

M&L for petty repairs to plastered surfaces and like in CM 1:4 including preparing roughening, cleaning and making good with birla putty, finishing even and smooth in patches area exc 0.25 Sqm but not exc 1.50 Sqm in each patch and applying two coat of OBD matching the existing adjacent surfaces over a coat of primer complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

M & L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone agg) as sub base surface finished even & fair with using extra cement complete all as specified and directed.

M&L 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engr-in-Charge. Make:- Nitco or Equivalent makes mentioned in list of Approved Makes

M&L chequred cement concrete tiles 30 cm x 30 cm x 25 cm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:6 complete all as specified.

Dismantling floor, stone, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for 18 to 20 mm granite slab of any size for service counter and platform over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and directed by Engr-in-charge.

M&L for skid/ non skid glazed ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for glazed ceramic colour tiles of of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

M&L Vitrified tiles 10 mm thick dark/ light shed (Square/rectangular ) area of each tile not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6) complete all as specified and as directed by Engineer-in-Charge.

M&L for coloured ultra/double charged/HD Fully Vitrified tiles, 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm in floors, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in cement mortar (1:4) for laying floor finishes, complete all as specified and directed. Note:- Shade & design as approved by EIC/GE

M&L for Glazed ceramic coloured tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc.complete all as specified and directed

M&L for brick work with subclass 'B' bricks straight or curved on plan exceeding 6mm mean radius built in CM 1:4 complete all as specified.and directed

M&L for Half brick work with subclass 'B' bricks straight or curved on plan built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate surface finished even and smooth using extra cement as in flooring complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm GI Union ISI marked complete all as specified.

S&F in repair 20 mm GI Union ISI marked complete all as specified.

S&F in repair 15 mm GI elbow ISI marked complete all as specified.

S&F in repair 20 mm GI elbow ISI marked complete all as specified.

S&F in repair 15 mm GI Tee ISI marked complete all as specified.

S&F in repair 20 mm GI Tee ISI marked complete all as specified.

S&F in repair GI Hexa Nipple 20 mm bore complete all as specified.

S&F in repair GI Nipple 20 mm bore and 100mm long complete all as specified.

S&F in repair GI Hexa Nipple 15 mm bore complete all as specified.

S&F in repair GI Nipple 15 mm bore and 100mm long complete all as specified.

S&F in repair 15 mm GI Socket ISI marked complete all as specified.

S&F in repair 20 mm GI Socket ISI marked complete all as specified.

S&F in repair GI Nipple 20 mm bore and 75mm long complete all as specified.

S&F in repair GI Nipple 15 mm bore and 75mm long complete all as specified.

S&F in repair GI Nipple 20 mm bore and 50mm long complete all as specified.

S&F in repair GI Nipple 15 mm bore and 50mm long complete all as specified.

M&L for Attending complaints relelated to Mason works, which includes repair of plastering, floor, hardstanding, brick work using old bricks, roof repair, chajjas etc in small patches by deploying menpower within time frame and Contractr shall provide the T&P and Necessary Nail, Screws, Ladder for reaching 4th floor complete all as specified and as directed by Engr-in-charge. Note: Cement, sand and aggregate shall be measured and paid under seperate item here in after.

M&L for filling white cement in bathroom, kitchen or any damp area , cracks in tile etc. all complete as specified and directed.

S&F in repair fancy type long body Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repair 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm- 690 gms) complete all as specified.

Supply Only Disinfection hypo chlorine based having chlorine percentage 5-6 % in 40 Ltr jar all as specified and directed by engineer in charge.

S&F in repair M seal 20 gm complete all as specified.

S&F in repair pvc tank cover suitable for 500/1000 ltr tank complete all as specified.

S&F in repair, 4.8 mm thick exc 0.5 Sqm sheet glass ordinary quality and glazing, complete all as specified and as directed by Engr-in-Charge.

S&F in repair, 3 mm thick n.exc 0.5 sqm sheet glass ordinary quality and glazing, complete all as specified and as directed by Engr-in-Charge.

S&F in repair, glass putty, complete all as specified and as directed by Engr-in-Charge.

S&F in repair GI reducer 20mm/15 mm bore complete all as specified.

S&F in repair fancy type short body Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repair GI tank Nipple 15 mm bore complete all as specified.

S&F in repair GI dead plug 15 mm/20mm bore complete all as specified.

Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets complete all as specified and directed by Engr-in-charge.

S & F for 600x600mm plain board panel for ceiling 4.0 to 8.0 mm thk and incl necessary Gl/Alu frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl dismantling of walls and ceiling board any type complete all as specified and directed by Engineer-in-Charge.

M&L for PVC hollow panelling 5 to 8 mm thick on ceilling with necessary frame work in Design POPUP pattern and any colour approved by engr-in-charge, inclusive of fixing on to ceiling incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed

M&L in repair for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed

M&L in repair for PU Stone 60mm wall panelling of any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with sleeves and screws as required at site complete all as specified and directed

M&L in repair for Soul wood WPC Exterior wall panelling size (2900x219x26) mm any colour/design approved by Engr-in-charge, inclusive of fixing on to wall incl L Corner, moulding end caps and necessary frame work for fixed and screws as required at site complete all as specified and directed by Engineer-in-Charge.

M&L in repair for Soul wood WPC Exterior ceilling with necessary frame work in Design POPUP pattern and any colour approved by engr-in-charge, size (2900x219x26) mm any colour/design approved by Engr-in-charge, inclusive of fixing on to ceiling Corner, moulding end caps and necessary frame work for fixed and screws as required at site complete all as specified and directed by Engineer-in-Charge.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing sheet in any position, complete all as specified and directed by Engr-in-Charge.

S&F in repairs for 5 mm thick polycarbonate sheet of any colour as in roof covering/cladding to wall fixed with coach screws and washers over Aluminium cover Strip 40x3mm and rubber washer in each joint complete all as specified and directed by Engr-in-Charge.

Taking down Cement Plaster/Grit Wash from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. Note :- Rate included for four storey building including scaffolding and all safety measures

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement all as specified and as directed by Engineer in Charge.

M&L for 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra complete all as specified and directed by Engr-in-charge

M&L for 15mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 White cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 1 mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M&L for preparation of new treated plastered on wall/ceilling surfaces and applying two coats of weather proof exterior emulsion (water based) paint of dark colours/shade on walls (shade as approved by GE) over 1 coat of water based exterior primer to prepare the surface even and smooth for exterior/interior on wall/ceiling surfaces complete all as specified and directed by Engr-in-Charge.

M&L for one coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl one layer of 1mm thick wall care putty for exterior/interior on old scraped wall/ceiling surfaces and obtain smooth finish using sand paper complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge.

M & L for preparation of old wall surfaces by removal of existing treatment and apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 1mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M & L for preparation of old surfaces by removal of existing treatment and apply one coats of cement based paint over a coat alkali primer resistance incl one layer of 1 mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 1mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M&L for two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl one layer of 1mm thick wall care putty for exterior/interior on old scraped wall/ceiling surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge.

M&L for preparation of old surfaces by removal of existing treatment and applying two coats of distemper oil emulsion on wall/ceiling over one coat of primer incl one layer of 1mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying one coats of distemper oil emulsion on wall/ceiling over one coat of primer incl one layer of 1mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M & L for preparation of old surfaces by removal of existing treatment and apply one coats of cement based paint over a coat alkali primer resistance incl one layer of 1mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M&L for complete removal of existing treatment on walls/ roof projections including facial, cornices etc by scrapping with mechanical sander/Paint remover machine (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for applying two coats of oil bound distemper (OBD) over a coat of appropirate primer over and including a layer 2mm thick acrylic wall putty to achieve desired smoothness and eveness complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old/new treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment using sand paper and applying two coats of weather proof exterior emulsion (water based) paint (in camouflage pattern) of dark colours/shade on walls (shade as approved by GE) over 1 coat of water based exterior primer incl one layer of 1mm thick plaster of paris putty to prepare the surface even and smooth for exterior/interior on wall/ceiling surfaces complete all as specified and directed by Engr-in-Charge.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth n. exc 10cm all as specified and directed.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including imm thich putty over plaster surface over a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as specified and directed.

S&F Acrylic letters (English/Hindi) 300 mm high, 50 mm width and 3 mm depth hollow wall fixed on surfaces incl 3mm ACP sheets board of any description using stainless steel screws of suitable size or best quality adhesive including LED module rain proof lights fittings also inculding necessary wire upto light point in each letters complete all as specified and as directedby Engineer-in-Charge. Note : The rate of ACP Sheet will not be paid separately.

M&L for providing and applying Pidilite Dr fixit Pidifin 2K/Pidilite Dr Fixit Fastflex/ Fosroc Brushbond or equivalent to makes mentioned in List of Approved Makes which is two-component, acrylic polymer-modified cementitious waterproofing coating, in two coats over prepared concrete/masonry surface including surface cleaning, wetting, mixing as per manufacturer’s specification, and curing to ensure seamless waterproofing protection. Measurement shall be in square meters of finished waterproofed surface.

M&L for providing and applying URP 301, a polymer-based bonding and waterproofing agent, mixed with cement in specified ratio and applied in two coats over cleaned and pre-wetted concrete/masonry surfaces as per manufacturer’s specifications, including surface preparation and curing. Measurement shall be in square meters of finished treated surface. Make:- Pidilite Dr Fixit/ Fosroc/Sika or Equivalent makes mentioned in list of Approved Makes

S&F, Factory made 18 mm thick 100 % Solid WPC (Wood polymer composite) One side laminated board of required size comprising of virgin PVC resin of K valve 57-60 (suspension grade), calcium carbonate and natural fibers (wood powders/ rice husk/wheat husk) and Non toxic additives, made from extrusion process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg/cbm manufactured by an ISO 9001-2015 certified company, having good screw holding capacity, Minimum compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/ Borer free. Water/ Moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of board, for making kitchen cabinets,door shutter complete all as specified and directed by Eng -in Charge.

S&F for 75mm size, clip type self closing hinges for cabinets fitted with cadmium coated screws, complete all as specified and directed. Make - HETTICH, GODREJ or Equivalent makes mentioned in list of Approved Makes

S&F in repair 40 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&F in repair 100 mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabinet shutters, complete all as specified and directed.

S&F in repair magnetic catches for cabinets of size 50mm x 15mm complete with striking plate & magnetic stud, complete all as specified and directed.

S&F in repair for 20 inches drawer runners folding type with guide channels & sliding channels with appropriate ball bearing/ rollers etc. complete to obtain smooth movement of drawers complete all as specified and directed.

S&F in repair for stainless steel plain basket of size 530x508x100mm for kitchen, complete all as specified and directed.

S&F in repair for stainless steel perforated cutlery basket of size 480x508x100mm for kitchen complete all as specified and directed.

S&F in repair for stainless steel multipurpose basket of size 530x508 x200mm for kitchen, complete all as specified and directed.

S&F in repair for stainless steel Thali basket of size 530x508x200mm for kitchen complete, all as specified and directed.

S&F in repair stainless steel grain trolly of size 480x508x320mm for kitchen complete all as specified and directed.

Dismantling of existing roof treatment of any description/thickness including dismantling of water proofing plaster etc all as specified and as directed by Engr-in charge.

M&L for PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate coping, benching, roof padding as levelling course complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick cement plastering in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound

Cleaning top surfaces by brooming, wire brushing, removing grass, raking out joints to receive plaster and removing debris, grass etc outside the defence land complete all as specified and directed by Engineer-in-Charge. Note :- 1. Plaster shall be measured and separately under appropriate item of Sch ‘A’. 2.Rate of this item is inclusive of diconnect fitment at water tank or solar heater etc and refixing in the same position after compeleting of roof treatment.

M&L for applying 3.00mm thick APP based polymer membrane over 85/25 industrial bituminous coat @ 1.2 Kg/Sqm over bituminous primer @ 0.30 Ltr/Sqm on newly plastered clean and dry roof surface. Top surface shall be finished with bituminous base Aluminium paint, all joint shall be Sealed by torch application complete all as specified & as directed by Engr-in-charge. Note for all items :- (a) Contractor has to provide labour for attending the complaints/ performing the work, as required during any time of the contract period . (b) Contractor has to perform work at scattered location and on different time line in the station during the contract period. (c) The rate is inclusive of work done upto to 4 storey building. (d) The contractor has to make good of disturbed surfaces and remove the taking down materials/ debirs from defence area. The rate of taking down, bringing the vehicle and removing the debris is inclusive of quoted rartes.

Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken Modular boxes with earth dolly duly powder coated suitable for modulater plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. Note- Modular Switch and sockets will be measured and paid seperately.

For one light point/fan point controlled by one SP switch

For one bell point controlled by one No bell push

Complete all as per item No 222 above but for one 3 pin socket out let, 6 Amps on same board

Complete all as per item No 222 above but for one 3 pin socket out let, 6 Amps on Independent board

Complete all as per item No 222 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including Single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire 2.5 sqmm FRLS all as specified and directed by Engineer-in-Charge. Note : Only one 15 Amp point will be in one circuit.

Supply and Fix Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed by Engr-in- Charge.

Supply and Fix Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans.

Supply and Fix Bell push Modular flush type 6 Amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for hylem sheet of required size, , suitable for switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Switch and sockets will be measured and paid seperately).

For one light point/fan point controlled by one SP switch

For one light point controlled by two 2 - way SP switches

For one bell point controlled by one No bell push

Complete all as per item No 230 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.

Complete all as per item No 230 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.

Complete all as per item No 230 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS-694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in existing PVC conduit including mild steel sunken boxes with earth dolly duly powder coated suitable for hylem sheet of required size, suitable for switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. Note- Switch and sockets will be measured and paid seperately.

For one light point/fan point controlled by one SP switch

For one light point controlled by two 2 - way SP switches

For one bell point controlled by one No bell push

Complete all as per item No 234 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.

Complete all as per item No 234 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.

Complete all as per item No 234 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge.

S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet flush type 3 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix switch piano 5 Amps flush type single pole two way suitable for 240 volt AC

S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed.

Supply and fixing ding dong bell AC 230 volt single pole complete all as specified and directed

Supply and fixing of ceiling roses, surface bakelite 65x50mm 3 terminals , PVC/ Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed by Engineer-In- Charge.

Supply only Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed by Engr-in- Charge.

Supply only Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans.

Supply only switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only socket outlet flush type 3 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only switch piano 5 Amps flush type single pole two way suitable for 240 volt AC

Supply only switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed.

Supply onlying ding dong bell AC 230 volt single pole complete all as specified and directed

Supply only stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty complete all as specified and diected.

Supply only stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty complete all as specified and diected.

Supply only Rigid non-metallic PVC conduit of external diameter 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

Taking down old unsv VTPN DB of any size.

Complete all as per item No 262 here in before but TPN 8 way

Complete all as per item No 262.00 here in before but TPN 4 way

Taking down old unsv MCB SPN DB of any size.

Complete all as per item No 266 here in before but SPN 8 way

Complete all as per item No 266 here in before but SPN 12 way

Supply and fixing in replacement of MCCB 200 Amps FP 415 volts 3 phase 50 HZ ,Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed.

Supply and fixing in replacement of MCCB 160 Amps FP 415 volts 3 phase 50 HZ ,Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed.

Supply and fixing in replacement of MCCB 125 Amps FP 415 volts 3 phase 50 HZ, ,Ics=100%Icu,breaking capacity 16 KA complete all as specified and directed.

Supply only MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.

Supply only MCB SP 40 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.

Supply only MCB SPN 40 Amps 10 KA, 240 volt 50 Hz 'C' Series all as specified and directed by engineer-in-charge.

Supply only MCB TP 25-63 Amps 10 KA, 415 volt 50 Hz 'C' Series all as specified and directed by engineer-in-charge.

Taking down unserviceable submain wiring of alluminium of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed.

M & L for in submain wiring with two run of 10.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 10.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 25 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall and surface conduit on ceiling portion only complete all as specified . (Note:- 3 Runs of 10.0 Sqmm and one run of PVC conduit will be used as one unit for measurement purpose) .

Complete all as per item No 277.00 here in before but for 6.0 sqmm wire

Complete all as per item No 277.00 here in before but for 4.0 sqmm wire (For geyser and AC points)

Complete all as per item No 277.00 here in before but for 2.5 sqmm wire

Supply installation commissioning testing of tripod earthing in any kind of soil/strata complete with copper bonded earthing electrode chemical earthing system outer electrode dia 25 mm and 3 mtr long tightly filled with crystalline conductor mixture 250 microns copper coated along with bag of back bill compound 50 kg buried directly in the ground (earth pit not less than 2.25 meter deep below ground level) connected to and including galvanized iron strip 4 mm dia as earth lead by means of GI bolts,nuts,check nuts and washers and connecting earthing test point ,including CI covers ,frame and PCC (1:3:6) type C-2 using 20 mm graded stone aggergate as in earthing pit with CI cover and framing including necessary earth work etc complete all as specified .Note- PCC chamber shall be constructed at least one meter away from the building shall be provided in slanting manner.Note- PCC cover pit shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 kg (sqm in liew of CI)

Material and labour for galvanised iron strip 25 X 4 mm with saddles and fixing screws and connected as per site requirement comlete all as specified and as directed by Engineer-in-Charge.

Complete all as per item No 282 here in before but 4mm dia GI wire

Supply only wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.

Supply only wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.

Supply only wall mounted LED bulk head fittings, 10 watt, , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge.

Supply only ultra modern design architectural design 36 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.

Supply only surface mounted round shape 15 watt 220 volts AC, metal housing ,powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only surface mounted round shape warm white 24 watt 220 volts AC, metal housing ,powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only focus light round shape warm white LED 12 watt 220 volts AC with high efficiency PMMA diffuser suitable for surface/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only focus light round shape warm white LED 6 watt 220 volts AC with high efficiency PMMA diffuser suitable for surface/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only ultra modern design architectural design 36 watt 2x2 recess LED, 3000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.

Supply only PVC gang box suitable for one switch 5 Amps complete with screw and necessary arrangement complete all as specified and directed by Engineer in Charge.

Complete all as per srl item 294 here in before but for one 5 amps switch socket outlet.

Complete all as per srl item 294 here in before but for one 15 amps switch socket outlet.

Supply only Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB complete all as specified and directed.

Supply only exhaust fan heady duty metal body 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or in equivalent to Crompton Greaves.

Supply only of exhaust fan heady duty metal body type 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Supply only of exhaust fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Supply only of wall mounting fan heady duty 400 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Model No- Swing Penta Wall Fan.

Cutting of existing surface/wall for making hole suitable for fixing of exaust fan of required size including 04 Nos hold fastner and making good the disturbed surface all as specified and as directed by Engineer-in-Charge.

Supply only ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote control complete all as specified and directed by Engineer-in-Charge.

Supply only of fan capacitor with copper wire plastic body 2.5 mfd.

Supply only of fan capacitor with copper wire plastic body 3.15 mfd.

Supply only of fan capacitor with copper wire plastic body 4.0 mfd.

Taking down the old white hylem sheet from the existing flash metal box and replacing new supper quality white hylium sheet of size 8" x 10" complete all as specified and as directed by Engineer-in-Charge.

Complete all as per srl item 307 here in before but of size 5" x 5" complete all as specified and as directed by Engineer-in-Charge.

Complete all as per srl item 307 here in before but of size 8" x 5" complete all as specified and as directed by Engineer-in-Charge.

Complete all as per srl item 307 here in before but of size 9" x 13" complete all as specified and as directed by Engineer-in-Charge.

Supply only Batten Holder PVC white suitable for retrofit type CFL/LED Lamp cxomplete allas specified and as directed.

Supply only White cover plate with frame,1 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only White cover plate with frame, 2 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Metal flush box 1 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Metal flush box 2 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular MCB SP 25 Amps 10 KA, 240 volt 1 module all as specified and directed by Engineer-in-charge.

Supply only 3 pin plug top 15 Amps all as specified and directed by engineer-in-charge.

Supply only LED flood light fitting 150 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed.

Supply only LED flood light fitting 200 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed.

Supply only LED street light fittings 90 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection .

Supply only LED street light fittings 120 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection.

Supply only of GI pipe light grade 40 mm dia bracket to make L type 1.5 meter long for bldg light fitting complete all as specified and direted by Engr-in-Charge.

Supply only of MS flat clamp of size 30mmx5mm thick including nuts ,bolts and washer suitable for bldg light fitting complete all as specified and as directed by Engr-in-Charge.

Net Contract Sum will be after deducting Sch of Credit of Rs 1,19,238.90

Please Enable Macros to View BoQ information