Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.0 LAccepted-AOC PINE DALE PINE MOUNT RIDGE SHILLONG 793001 | EAST KHASI HILLS | MEGHALAYA | 793001 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹39.6 L+₹1.6 L (4.21%)Rejected-Finance | L2 | Rejected-Finance Other than L1 bidder | |
| 3 | L3₹43.0 L+₹5.0 L (13.3%)Rejected-Finance 777 AMAR NAGAR VILLAGE TOWN CITY RAE BARELI RAEBARELI UTTAR PRADESH 229001 INDIA | RAE BARELI | UTTAR PRADESH | 229001 | L3 | Rejected-Finance Other than L1 bidder | |
| 4 | L4₹45.3 L+₹7.3 L (19.2%)Rejected-Finance | L4 | Rejected-Finance Other than L1 bidder | |
| 5 | L5₹46.2 L+₹8.3 L (21.7%)Rejected-Finance MAWBLEI MADANRTING SHILLONG 793 021 MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793021 | L5 | Rejected-Finance Other than L1 bidder |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
14 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
HQ CWE Shillong, SE Falls, Shillong - 793011
PROVN OF STILT FLOOR PARKING (25M X 12M) OF ASHA SCHOOL, HAPPY VALLEY, SHILLONG UNDER GE SHILLONG
2023_MES_623569_1
8716/SHL/E8
Open Tender
Civil Works
Item Rate
180 days
Shillong
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Shillong
₹83,000
Yes
7 Dec 2023
17 Oct 2023
16 Nov 2023
17 Oct 2023
14 Nov 2023
31 Oct 2023
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Material and labour for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.
Material and labour for Reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregates) as in Foundations, including rafts, footings, foundation plinth beams; bases for columns, etc. basement slabs, under- reamed piles and mass concrete complete all as specified and directed.
Material and labour for Reinforced cement concrete, M-25 (design mix) (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.
Material and labour for Reinforced cement concrete, M-25 (design mix) (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
6 Material and labour for Reinforcement cement concrete, M-25 (design mix) (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required including bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per item No. 7.00 here-in-before, but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.
Use and waste of Formwork to sides of concrete as in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for fair finished flat surfaces complete all as specified and directed.
Use and waste of Formwork as in sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of rectangular, square or polygonal complete all as specified and directed.
Use and waste of Formwork to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams etc for rough finished flat surfaces complete all as specified and directed.
Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished flat surfaces of concrete complete all as specified and directed.
Material and labour for rendering 10 mm thick on concrete surfaces in cement mortar (1:6) as backing coat and 5 mm thick in cement mortar 1:4 finishing the surface even and smooth without using extra cement, including mixing liquid water proofing compound as per manufacturer instruction complete all as specified and as directed. Note:- WPC will be measured & paid separately
Material and labour for two coats of Pitch Free PU based Liquid applied single component elastomeric waterproofing membrane (Nitoproof 600PF or equivalent) applied by using suitable spray machine over concrete surface, surface may be reinforced with suitable fabric reinforcement prior to the treatment and each coat should be of minimum 1.5 mm thickness, shrinkage and non moving cracks should be pre treated with not less than 1.5 mm thick coating of elastomeric waterproofing membrane extending 75mm either side of crack all as specified and directed. Note: Cost of elastomeric waterproofing Membrane, fibre reinforcement, crack repairing and other connected items are deemed to be included in the quoted rate.
Material and labour for rendering 10mm thick in cement mortar 1:6 on brick or concrete surfaces of walls to be finished even and smooth (without using extra cement) complete all as specified and directed.
Supply only liquid water proofing compound.
Removing excavated material/soil not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Returning, filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm of hard/dense or soft/loose soil complete all as specified and directed.
Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint of approved colour over priming coat on exterior wall complete all as specified and directed.
Material and labour for preparation of new plastered/concrete surfaces of walls, providing 2mm thick of wall care putty to achieve smooth surfaces and applying two coats of Oil Bound distemper of approved shade/tint over a coat of compatiable primer complete all as specified and directed.
Material and labour for three coats of white wash on new ceiling surfaces including preparation of surfaces complete all as specified and directed.
Material and labour for Hardcore of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
Material and labour for 75 mm thick cement concrete 1:4:8, type D-2, (using 40 mm graded stone aggregates) as in Sub base of floor complete all as specified and directed.
Material and labour for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) complete all as specified and directed
M/S C.M.V CONSTRUCTIONS
Singh and Co
M/s Sohini Construction
S.M ENGINEERING AND CONSTRUCTION
M/s Dhani Enterprise
M/S P&R CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .