Loading
Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.1 L
Closing Date
25 May 2026, 4:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
ELECT. GEN
14 conditions · 3 needing a document upload
As per RB's letter no. 2019/Elect(G)/165/1, dt. 22.04.2020, the financial eligibility criteria as mentioned in latest GCC for works 2022 or any amendment thereafter has been dispensed with in cases of bidders who are OEM (Original Equipment Manufacturer).
As per Railway Board's letter no. 2006/Elect(G)/138/1pt. dt. 03.06.2025 the maintenance of Power Car and escorting of Power Car and LSLRD shall be carried out by same agency, maintenance (A, B, C, D & E) and escorting works to be executed by respective OEMs. OEM can get the work done through their authorized dealers for escorting and A, B & C checks. D and E checks have to be carried out by OEMs only. Only OEM will participate in Railway tenders of DA set maintenance and escorting. Full responsibility regarding execution of work will be of OEM only and billing will also be done in name of OEM.
As per RB's letter no. 2019/Elect(G)/165/1, dt. 22.04.2020, the technical eligibility criteria as mentioned in latest GCC for works 2022 or any amendment thereafter has been dispensed with in cases of bidders who are OEM (Original Equipment Manufacturer).
50 conditions · 7 needing a document upload
Letter of Credit as Mode of Payment in Works Tender or Service Tender has been introduced as per Rly Board's letter no. 2018/CE-I/CT/9, New Delhi, dtd: 04.06.2018 (Documents are attached in uploaded section named as Conditions for LC Credit)). Tenderers are advised to see the uploaded section carefully for availing LC Credit at the time of bidding in IREPS Portal.
The Bid Security shall be deposited either in cash through epayment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure VI A and shall be valid for a period of 90 days beyond the bid validity period. The tenderer are advised to upload the Bid Security in case of BG as per Annex VI A for BID SECURITY uploaded in document Tab. Also,the original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days before closing date for submission of bids (i.e. excluding the last date of submission of bids).Non submission of scanned copy of Bank Guarantee with the bid on etendering portal(IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. NOTE- Bank Guarantee for Bid Security shall be Acting Through DRM/ELE/RNC and Beneficiary shall be FA & CAO/S.E.Rly/Garden Reach/Kolkata.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The rate quoted by tenderer should inclusive of all kind of taxes (direct tax, indirect tax, GST etc.) levied by the Central government/State Government /Local Bodies from time to time.
Tenderers are required to upload copy of Permanent Account Number, GST, EPF & ESI Registration Number.
Contractor is to abide by the provisions of various labour laws in terms of above clause 54, 55, 55-A and 55-B of Indian Railways Standard General Conditions of Contract. In order to ensure the same, an application has been developed and hosted on website www.shramikkalyan.indianrailways.gov.in'. Contractor shall register his firm/company etc. and upload requisite details of labour and their payment in this portal. These details shall be available in public domain. The Registration/ updation of Portal shall be done as under:(a)Contractor shall apply for onetime registration of his company/firm etc. in the Shramik Kalyan portal with requisite details subsequent to issue of Letter of Acceptance. Engineer shall approve the contractor's registration in the portal within 7 days of receipt of such request. (b)Contractor once approved by any Engineer, can create password with login ID (PAN No.) for subsequent use of portal for all Letter of Acceptances (LOAs) issued in his favour. (c)The contractor once registered on the portal, shall provide details of his Letter of Acceptances (LOAs) / Contract Agreements on Shramik Kalyan portal within 15 days of issue of any LOA for approval of concerned Engineer. Engineer shall update (if required) and approve the details of LOA filled by contractor within 7 days of receipt of such request. (d)After approval of LOA by Engineer, contractor shall fill the salient details of contract labours engaged in the contract and ensure updating of each wage payment to them on Shramik Kalyan portal on monthly basis.Updated correction slip also applicable.
(a)In case of any information submitted by tenderer is found to be false, forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Bid Security besides banning of business for a period of up to five years. (b) In case of any information submitted by tenderer is found to be false, forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of up to five years.
All terms and conditions in the tender documents are binding on the Tenderers.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action.
The Tenderers are advised to visit the site of work in their own interest and acquaint themselves with the site conditions and expected quantum of work and assess all the site specific difficulties to be experienced while executing the same and the rate shall be arrived duly considering all the facts above and quoted in the tender. Any representation at a later date specifying the site difficulties shall not be consider.
The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere the instructions and directions given at different pages.
The quantities shown above are approximate and to give a General guideline Railway reserves the right to increase or decrease or to delete any of the item
Tenderer must note that his offer shall invariably accompany all scanned copies of documents required for fulfilling the minimum eligibility criteria. After opening of tender no document will be accepted. Only clarification / verification of credentials will be done.
All requisite documents are to be properly submitted online only and the bidders should ensure that the content of the documents uploaded is distinctly legible/readable.
CORRIGENDUM NOTICE ON IREPS: [I]Railway may modify the tender document by issuing online corrigendum through "www.ireps.gov.in" 15 days prior to the tender closing date. For the purpose of CORRIGENDUM in the tender, NIT period is split as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer.
The schedule items in NIT/price schedule shall be read in conjunction with scope of work and explanatory notes for the respective items for carrying out the work under the respective schedule item.
Warranty period for the overall work will be 24 (Twenty Four ) months from the date of completion of the work. Any defects, if arises during the warranty period contractor will be responsible to rectify or replace as the case may be at the discretion of the Railway Administration. Security deposit will be refunded/ released after successful completion of the guarantee period. Also, contractor has to ensure proper functioning of the items covered under specific warranty as mentioned in Tender Documents during that period (Warranty period will be calculated from the date of commissioning).
The Bid Security shall be rounded off to the nearest 100. This Bid Security shall be applicable for all modes of tendering. (ii) Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security detailed above. (iii) Labour Cooperative Societies shall submit only 50% of above Bid Security detailed above.
Bid Security: The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as specified in the tender, under the conditions of tender.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days before closing date for submission of bids(i.e excluding the last date of submission of bids).iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal(IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender.v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to the officer and address as mentioned in the tender document. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
The rate quoted by the tenderer should be inclusive of all Taxes, labour charges, loading, unloading, material handling, Transportation, etc., as applicable and all other charges liveable by the Govt. from time to time. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates and ITC of GST if any shall be passed on to the Railway.
CMC through OEM of Kirloskar make DG sets of power cars including operation.
EL-G-RNC-OT-PCAR-KI-10-26
EL-G-RNC-OT-PCAR-KI-10-26
Open
Works - General
24 Months
Ranchi, Jharkhand
₹0
₹4.1 L
18 May 2026
24 Apr 2026
4 May 2026
114 items across 3 schedules · ₹2,04,35,967.9 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | supply of B - Check Kit for Kirloskar Make Engine with following item ( 1) Kirloskar Care Genuine Coolant premix 5 Liter Can. Part No. - 82.020.35.1.05. Qty- 01 Ltr. (2) LUBE OIL FILTER. Part no. - DV0.014.11.0.00. Qty. - 01 Nos. (3.)LUBE OIL FILTER- WITH KIRLOSKAR LOGO REVERSAL. Part no.- DV0.014.27.0.00. Qty- 01 Nos.(4) PRE- FILTER CARTRIDGE. Part no. - D16.507.03.0.00. Qty- 01 Nos.(5) FINAL FILTER CARTRIDGE (FM100). Part no.- DV8.072.108.0.00. Qty- 02 Nos. (6) CENTRIFUGAL FILTER SERVICE KIT FOR DV. Part no. - DV0.999.40.0.00. Qty- 01 Nos. (7) AIR FILTER PRIMARY*. Part no.- D16.505.41.0.00. Qty- 01 Nos.(8) Lube Oil Cl4+, Grade 15W 40 (05 ltr). Qty- 01.(9) Lube Oil Cl4+, Grade 15W 40. (50 ltr). Qty- 01 | Set | 18.00 | 50,379 | 9,06,822 |
| 2 | Supply of C-Check Kit for kirloskar Make engine Model no. DV09026 with follllowing items.. (1). K Cool Super plus 50-50 premix 5 Ltr CAN. Part no.- 82.020.35.1.05. Qty - 01 Can. (2). Lube Oil filter. Part no.- DV0.014.11.0.00. Qty - 01 Nos. (3). Lube Oil filter with Kirloskar Logo Reversal. Part no.- DV0.014.27.0.00. Qty - 01 Nos. (4). Pre filter Cartridge (Water separator). Part no.- D16.507.03.0.00. Qty - 01 Nos. (5). Final filter Cartridge FM 100 Centrifugal Filter. Part no.- DV8.072.108.0.00. Qty - 02 Nos. (6). Service kit for DV. Part no.- DV0.999.40.0.00. Qty - 01 Set. (7). Air Filter Primary*. Part no.- D16.505.41.0.00. Qty - 01 Nos. (8). Air Filter Safety*. Part no.- D16.505.42.0.00. Qty - 01 Nos. (9). Joint for rocker cover (Metallic Gasket). Part no.- DV0.009.05.0.00. Qty - 10 Nos. (10). O ring rocker Box Cover **. Part no.- DV2.067.03.0.PR. Qty - 10 Nos. (11). Belt V Section (BX 58 Pitch length (1520). Part no.- DV0.016.08.0.00. Qty- 01 nos. (12). Lube oil CI 4+, Grade 15W 40 (05 Ltr.) Qty. -01 Pack. (13). Lube oil CI 4+, Grade 15W 40 (50 Ltr.). Qty. -01 Pack. | Set | 6.00 | 63,421 | 3,80,526 |
| 3 | Supply of Lube Oil Pressure Sensor Part no. DV0.802.52.0.01/DV0.802.52.0.PR | Numbers | 4.00 | 4,212.6 | 16,850.4 |
| 4 | Supply of Lube Oil Sendar Pigtail. Part no. F6.046.115.0.PR. | Numbers | 4.00 | 746.55 | 2,986.2 |
| 5 | supply of Electromagnetic Vaccum indicator (EMVI) with connector. Part no. DV0.807.19.0.PR | Numbers | 5.00 | 2,711.09 | 13,555.45 |
| 6 | supply of Water Level/ Float type level sensor. Part no. DV0.807.52.0.PR | Numbers | 10.00 | 1,646.39 | 16,463.9 |
| 7 | supply of Exhaust Tempreture sensor (K- thermocouple With Omega Make- socket- ostw-k-f Adjustable Fitting: M14x1.5) Make- Radix (Modified Non Gounded sensor required). Part No.- DV0.861.14.0.PR | Numbers | 3.00 | 12,638.85 | 37,916.55 |
| 8 | supply of Dual O/P MPU Make- UNITECH. Part No.- F6.741.26.0.PR | Numbers | 3.00 | 3,057.6 | 9,172.8 |
| 9 | Supply of DG Compartment Tempt. Sensor. Part No.- DV0.861.13.0.PR | Numbers | 3.00 | 13,146 | 39,438 |
| 10 | Supply of Pigtail. Part No.- DV0.921.70.0.PR | Numbers | 4.00 | 1,874.25 | 7,497 |
| 11 | Supply of Air Flow Paddle Switch. Part No.- DV0.807.48.0.PR | Numbers | 6.00 | 36,189.29 | 2,17,135.74 |
| 12 | supply ofTempreture Sensor TFW for 4K1080TAE (122.1 KW @ 2500 RPM) CEV3. Part No: 0 281 002 209 653. / part no - 4H.508.08.0.00 | Numbers | 4.00 | 1,282.04 | 5,128.16 |
| 13 | supply of Fresh Air In Tempreture Sensor (Type: RTD With MS 3102R 10SL-3 Connector Adjustable Fitting: M14x1.5) Make: RADIX. Part No.- DV0.861.12.0.PR | Numbers | 4.00 | 9,912 | 39,648 |
| 14 | supply of 4-20 mA Lube Oil Pressure Sensor GEMS make 3100 series, Code- DV0.812.11.0.00, MakeKirloskar Oil Engines Ltd. MAKE: KIRLOSKAR | Numbers | 4.00 | 2,228 | 8,912 |
| 15 | Replacement of different type of sensor sensor ( rate each no) | Numbers | 54.00 | 205.77 | 11,111.58 |
| 16 | supply of Fuel filter for Commaon Rail. Part No. DV8.072.01.0.00. | Numbers | 5.00 | 1,11,491.12 | 5,57,455.6 |
| 17 | Replacement of Fuel filter for Commaon Rail. Part No. DV8.072.01.0.00. | Numbers | 5.00 | 5,517.94 | 27,589.7 |
| 18 | Supply of Fuel pump part no- DV0.040.540.0.PR | Numbers | 1.00 | 4,76,546.7 | 4,76,546.7 |
| 19 | Supply of Lucas Starter 9.0 KW SM50 Series for DV Engine. Part No.- DV0.027.12.0.PR | Numbers | 2.00 | 95,037.6 | 1,90,075.2 |
| 20 | Removal of defective self starter and replecement/refitment with new self starter | Numbers | 2.00 | 1,660.87 | 3,321.74 |
| 21 | supply of Right bank T'Charger: DV10. Part no.- DV0.032.98.00 | Numbers | 2.00 | 76,339.2 | 1,52,678.4 |
| 22 | supply of Left Bank T'Charger: DV10. Part No.- DV0.032.97.0.00 | Numbers | 2.00 | 76,313.99 | 1,52,627.98 |
| 23 | Removal of defective Turbocharger and replacement/ refitment with new Turbocharger. | Job | 4.00 | 6,155.43 | 24,621.72 |
| 24 | supply of 0 440 008 090 Feed Pump. Part No.- DV0.040.01.0.00 no 1 26,283.59 | Numbers | 1.00 | 26,283.59 | 26,283.59 |
| 25 | supply of Flexible inlet fuel pipe-1 from filter outlet to engine. Part No.- DV0.808.145.0.PR | Numbers | 4.00 | 11,219.25 | 44,877 |
| 26 | Supply of Radiator Motor. Part No. DV0.999.40.0.SP | Numbers | 1.00 | 1,81,767.6 | 1,81,767.6 |
| 27 | Dismantling, Unloading of Radiator Fan Motor with Fan Blade from Power Car and loading of new motor with fan blade and fitment | Job | 1.00 | 29,436.51 | 29,436.51 |
| 28 | Supply of Ventilation Blower Motor. Part no.- DV0.999.73.0.SP | Numbers | 1.00 | 60,727.8 | 60,727.8 |
| 29 | Dismantling, Unloading of Vent Fan Motor with Fan Blade from Power Car. | Job | 1.00 | 17,661.91 | 17,661.91 |
| 30 | Loading, testing &commissioning of Vent Fan Motor with Fan Blade in Power Car. | Job | 1.00 | 17,661.91 | 17,661.91 |
| 31 | supply of Genset Controller KG 745 Type- DSE 7320 MK II (7320-A3). Part No.- DV0.858.05.0.00 | Numbers | 2.00 | 48,925.79 | 97,851.58 |
| 32 | Replacement of controller with software update if required | Numbers | 2.00 | 4,895 | 9,790 |
| 33 | supply of Engine Wirring Harness Assembly For DV10 Engine (With PKC Conduict & T). Part No.- DV0.918.70.0.PR | Set | 1.00 | 50,747.55 | 50,747.55 |
| 34 | Replacement of haress assembly Part No.- DV0.918.70.0.PR Replacement of haress assembly Part No.- DV0.918.70.0.PR | Set | 1.00 | 5,074 | 5,074 |
| 35 | Supply of Genset Pannel To Remote Panel Harness. Part no.- DV0.921.10.0.PR | Set | 1.00 | 25,408.95 | 25,408.95 |
| 36 | Replacement of haress assembly Part no.- DV0.921.10.0.PR | Set | 1.00 | 2,540 | 2,540 |
| 37 | Supply of Engine Control Alternator C.T. Harness. Part No.- DV0.921.20.0.PR | Set | 1.00 | 9,152.84 | 9,152.84 |
| 38 | supply of Remote Panel Tp Railway Main Panel harness. Part No.- DV0.921.30.0.PR | Set | 1.00 | 13,322.4 | 13,322.4 |
| 39 | Supply of Genset Panel To Expansion Module- DSE 2157 Communication Harness. Part No.- DV0.921.40.0.PR | Set | 1.00 | 21,255.15 | 21,255.15 |
| 40 | Supply of Wirring Harness For Tempt, Sensor Conn. Part No.- DV0.918.80.0.PR | Set | 1.00 | 20,606.24 | 20,606.24 |
| 41 | Replacement of haress assembly Part No.- DV0.921.20.0.PR, Part No.- DV0.921.30.0.PR, Part No.- DV0.921.40.0.PR, Part No.- DV0.918.80.0.PR | Set | 4.00 | 1,332 | 5,328 |
| 42 | Supply of Kent Fuel Flow Meter. Part No.- DV0.806.96.0.PR | Numbers | 1.00 | 95,052.3 | 95,052.3 |
| 43 | Replacement of kent fuel flow meter | Numbers | 1.00 | 9,505 | 9,505 |
| 44 | Supply of Expansion Module DG Room. Part No.- DV0.807.111.0.00 | Numbers | 2.00 | 46,042.5 | 92,085 |
| 45 | Supply of Expansion Module Panel Room. Part No.- 02.991.33.0.00 | Numbers | 2.00 | 24,382.04 | 48,764.08 |
| 46 | Replacement of expansion module | Numbers | 4.00 | 4,604 | 18,416 |
| 47 | Supply of Oil Cooler. Part No.- DV0.014.01.0.00 | Numbers | 1.00 | 39,004.35 | 39,004.35 |
| 48 | Replacement of Oil Cooler. Part No.- DV0.014.01.0.00 | Numbers | 1.00 | 3,595 | 3,595 |
| 49 | Supply of METRING CT ASSBLY, KOEL PART NO: DV0.998.13.0.SP, SUITABLE FOR LEROYSOMER MAKE ALTERNATOR, CAPACITY 500 KVA, MODEL NO: LSTR47.2L, FITTEDWITH KOEL MAKE DG SET, MODEL NO:DV10TAG1. | Numbers | 1.00 | 21,266 | 21,266 |
| 50 | supply of metering CT neutal part no- DV0.998.17.0.SP | Numbers | 3.00 | 6,082.65 | 18,247.95 |
| 51 | Replacement of metering CT | Numbers | 4.00 | 579 | 2,316 |
| 52 | supply of Fuse F1 part no- DV0.998.19.0.SP | Numbers | 6.00 | 7,063.35 | 42,380.1 |
| 53 | supply of Contactor (K3) 24V. Part No.- DV0.998.23.0.SP | Numbers | 2.00 | 29,492.4 | 58,984.8 |
| 54 | supply of Fuse F2 part no- DV0.998.24.0.SP | Numbers | 6.00 | 7,063.35 | 42,380.1 |
| 55 | supply of Rheostat. Part no DV0.998.05.0.SP | Numbers | 1.00 | 22,643.24 | 22,643.24 |
| 56 | supply of Relay 1 (K1). Part No.- DV0.998.08.0.SP | Numbers | 2.00 | 33,215.7 | 66,431.4 |
| 57 | supply of Relay 2 (K2). Part No.- DV0.998.09.0.SP | Numbers | 2.00 | 35,474.24 | 70,948.48 |
| 58 | supply of Radiator Fan For 5029 Model. Part No.- DV0.998.33.0.SP | Numbers | 1.00 | 61,617.15 | 61,617.15 |
| 59 | supply of Radiator Fan For 504550465047 Model. Part No.- DV0.998.35.0.SP | Numbers | 1.00 | 64,622.24 | 64,622.24 |
| 60 | Replacement of radiator fan | Numbers | 2.00 | 5,680 | 11,360 |
| 61 | Supply of Water Pump Assembly | Numbers | 3.00 | 20,571.59 | 61,714.77 |
| 62 | Removal of defective Pump Water and and replacement/ refitment with new Pump Water. | Job | 3.00 | 1,593.82 | 4,781.46 |
| 63 | supply of Oil Seal Flywheel End. Part No.- DV0.025.18.0.PR | Numbers | 2.00 | 1,452.15 | 2,904.3 |
| 64 | Removal of defective Oil seal fly wheel side and replacement / refitment with new Oil seal fly wheel side. | Numbers | 2.00 | 15,244.79 | 30,489.58 |
| 65 | Supply of Power Car Genset Coupling Rubber Element. Part No.- DV0.807.261.0.SP | Numbers | 1.00 | 64,006.95 | 64,006.95 |
| 66 | Replacement of rubber coupling element | Numbers | 1.00 | 6,400 | 6,400 |
| 67 | supply of Left Bank Turbo Charger (Viewed From Flywheel) For DV8 Engine. Part No.- DV8.032.31.0.00 | Numbers | 2.00 | 64,158.14 | 1,28,316.28 |
| 68 | supply of Right Bank Turbo Charger (Viewed From Flywheel) For DV8 Engine. Part No.- DV8.032.32.0.00 | Numbers | 2.00 | 62,294.39 | 1,24,588.78 |
| 69 | Removal of defective Turbocharger and replacement/ refitment with new Turbocharger. | Job | 4.00 | 6,155.43 | 24,621.72 |
| 70 | supply of Mechinical Injector With Side Fuel Entry. Part No.- DV2.050.13.0.PR | Numbers | 1.00 | 21,933.45 | 21,933.45 |
| 71 | supply of Injector Assembly. Part No.- DV2.008.10.0.00/DV2.050.01.0.00 | Numbers | 8.00 | 9,677.84 | 77,422.72 |
| 72 | Removal of defective fuel Injectors and replacement / refitment with new fuel Injectors. | Job | 8.00 | 1,648.78 | 13,190.24 |
| 73 | supply of VDO Sensor Assembly to KOEL Part no.-4H.890.40.0.00 Suitable for KOEL make Engine fitted LHB Power Cars. | Numbers | 1.00 | 2,055 | 2,055 |
| 74 | supply of SPEED CONTROL UNIT TO KOEL PART NO: DV0.040.92.0.00 | Numbers | 1.00 | 45,959 | 45,959 |
| 75 | Replacement of speed control unit | Numbers | 1.00 | 4,595 | 4,595 |
| 76 | supply of CENTRIFUGAL OIL CLEANER (BAND DESIGN) Part no. DV0.041.25.0.00 Suitable for 500KVA, 750VDG set, Make: Kirloskar oil engines ltd. (KOEL) Model No: - DV10TA G1 (DV Series DV0.9026) of LHB Power Car.MAKE: Kirloskar Oil Engines Limited | Numbers | 2.00 | 6,442.98 | 12,885.96 |
| 77 | supply of Relay Board 1.5 CH 70A CAPA Part No.-DV0.853.07.0.00 Suitable for 500KVA, 750V DG set, Make:Kirloskar oil engines ltd. (KOEL) Model No: - DV10TA G1 (DV Series DV0.9026) of LHB Power Car. MAKE: KIRLOSKAR | Numbers | 2.00 | 1,492 | 2,984 |
| 78 | supply of Actuator 24V To KOEL Part no: DV0.040.93.0.00 For Engine Model No. DV0.9019. Firm's offer:KIRLOSKAR CARE | Numbers | 2.00 | 54,221 | 1,08,442 |
| 79 | Removal of defective Actuator and replacement / refitment with new Actuator. | Job | 3.00 | 2,148.9 | 6,446.7 |
| 80 | supply of Over Voltage Protection Unit. Part No.- DV0.801.37.0.SP suitable for LEROY SOMER make for 500KVA, 750V, 3 Phase, 50 Hz, 1500 RPM, 380 Amp, Brushles | Numbers | 1.00 | 1,61,704.2 | 1,61,704.2 |
| 81 | supply of MDL, OVM 3PH TO CUMMINS PART NO: A057E698 FOR STAMFORD MAKE ALTERNATOR | Numbers | 1.00 | 1,92,838.6 | 1,92,838.6 |
| 82 | supply of Compounding Transformer. Part No.- DV0.998.02.0.SP suitable for LEROY SOMER make for 500KVA, 750V, 3 Phase, 50 Hz, 1500 RPM, 380 Amp, Brushles | Numbers | 1.00 | 1,28,979.9 | 1,28,979.9 |
| 83 | Removal defective Compound Transformer and erection testing & commissioning of new Compound transformer | Job | 2.00 | 9,006.95 | 18,013.9 |
| 84 | supply of Diode Assembly. Part No.- DV0.998.16.0.SP. suitable for LEROY SOMER make for 500KVA, 750V, 3 Phase, 50 Hz, 1500 RPM, 380 Amp, Brushles | Numbers | 1.00 | 34,949.25 | 34,949.25 |
| 85 | Removal of defective Diode Assembly for 500KVA Alternator and replacement / refitment, Testing & commissioning of Diode Assembly for 500KVA Alternator. | Job | 2.00 | 2,354.92 | 4,709.84 |
| 86 | supply of Bridge Rectifier Diode. Part No.- DV0.998.20.0.SP suitable for LEROY SOMER make for 500KVA, 750V, 3 Phase, 50 Hz, 1500 RPM, 380 Amp, Brushles | Numbers | 2.00 | 22,058.4 | 44,116.8 |
| 87 | supply of Exciter Stator. Part no.- DV0.999.33.0.SP suitable for LEROY SOMER make for 500KVA, 750V, 3 Phase, 50 Hz, 1500 RPM, 380 Amp, Brushles | Numbers | 1.00 | 76,500.89 | 76,500.89 |
| 88 | Replacement of exciter stator by removing defective exciter | Numbers | 1.00 | 7,650 | 7,650 |
| 89 | Supply of Starter RDSO. Part No.- DV0.027.13.0.PR | Numbers | 1.00 | 1,28,166.14 | 1,28,166.14 |
| 90 | Replacement of defective starter by new one. | Numbers | 1.00 | 11,800 | 11,800 |
| 91 | supply of Isolation Transformer for Stamford AVR of 500 KVA D G. Set of cummins make engine. | Numbers | 1.00 | 28,910 | 28,910 |
| 92 | supply of AVR(Automatic Voltage regulator)MODEL NO.MX321-MK2 AS PER STAMFORD PART NO.E000-23212.REQUIRED FOR 750V,500KVA STAMFORD MAKE ALTERNATORS OF CUMMINS DIESEL ALTERNATOR SET IN HIGH CAPACITY POWER CARS Make:-Stamford. | Numbers | 1.00 | 74,011.34 | 74,011.34 |
| 93 | supply of AVR. Part No.- DV0.998.01.0.SP. Suitable for LEORYSOMOER Alternatorsuitable for LEROY SOMER make for 500KVA, 750V, 3 Phase, 50 Hz, 1500 RPM, 380 Amp, Brushles | Numbers | 1.00 | 3,14,163.15 | 3,14,163.15 |
| 94 | Removal of defective AVR for 500KVA Alternator and replacement / refitment, Testing & commissioning of AVR for 500KVA Alternator. | Job | 2.00 | 2,943.65 | 5,887.3 |
| 95 | Supply of Kirloskar care genuine coolant premix 5 liter can part no- 82.020.35.1.05 | Numbers | 40.00 | 914.54 | 36,581.6 |
| 96 | Supply of Cladding material for all types Diesel Engine for exhaust Pipe Line. | Set | 1.00 | 21,865.44 | 21,865.44 |
| 97 | Dismantling, stator & rotor re- winding of 500KVA Alternator including Heat Varnishing of Main Field, Heat Varnishing of Compound Tranformer Exciter field, Heat Varnishing of Exciter Stator and Load testing with test report. | Job | 1.00 | 2,82,590.5 | 2,82,590.5 |
| 98 | Unloading, transportation (from Railway premises to Firms Work shop and back to Railway premises) and Loading of Alternator with alignment & commissioning in Power Car. | Job | 1.00 | 45,745.31 | 45,745.31 |
| 99 | Supply of Alternator Coupling. | Set | 1.00 | 28,482.21 | 28,482.21 |
| 100 | Remeval defective Alternator Coupling and errection testing & commissioning of new Alternator Coupling. | Job | 1.00 | 5,887.3 | 5,887.3 |
| 101 | Supply of Fuel Gauge with sensor and gasket suitable for fuel tank Of LHB type Power Car. | Set | 2.00 | 4,003.37 | 8,006.74 |
| 102 | Flushing of Fuel Tank in LHB Type Power Car with removal of defective Fuel Gauge with sensor and fitment of new Fuel Gauge if required. | Job | 2.00 | 1,766.19 | 3,532.38 |
| 103 | A-check/ Trip maintenance of DA set(including alternator maintenance) of power caras per maintenance schedule. Note:-(i) Rates quoted under this item will include rate for A-Check/Trip maintenance of DA set of one power car in each trip. | Job | 1320.00 | 453.17 | 5,98,188.36 |
| 104 | Service charges for 'B' check with deputation of One Supervisor with Two Skilled fitters and Two UnSkilled fitters. | Job | 45.00 | 2,100.22 | 94,509.9 |
| 105 | Service charges for 'C' check | Job | 16.00 | 2,958.04 | 47,328.64 |
| 106 | unloading , loading dismantling of Radiator, core leakage brazing & Water pipe line leakage reparing & replacement of clamp & replacement of radiator gasket, nuts, bolts and testing. | Job | 2.00 | 26,717.71 | 53,435.42 |
| 107 | Unloading of Radiator set & after cooler from Power Car and inside outside cleaning of all tubes, takes by water jet with cleaning solution and loading ofthe same in the Power Car with all ancillary works fixing testing &commissioning. | Job | 12.00 | 15,457.57 | 1,85,490.84 |
| 108 | Greasing Alternator (after every 1500Hrs.) | Job | 4.00 | 1,273.9 | 5,095.6 |
| 109 | Removal of starter battery and fitment of new battery | Set | 3.00 | 2,500 | 7,500 |
| 110 | B- Check maintenance kit of Kirloskar CPCB- IV engine Model No. DV8 ETA4G3 (CPCV- 4+). (1). KIRLOSKAR CARE GENUINE COOLANT PREMIX 5 LITRE CAN. KIRLOSKAR PART NO. - 82.020.35.1.05. QTY. - 03 NOS. (2) LUBE OIL FILTER BY PASS SPIN ON. KIRLOSKAR PART NO. - DV0.014.67.0.00. QTY. - 01 NOS. (3). LUBE OIL FILTER-FULL FLOW- SPIN ON KIRLOSKAR LOGO REVERSAL APPLICATION. KIRLOSKAR PART NO. - DV0.14.72.0.PR. QTY. - 01 NOS. (4). FINAL FILTER CARTRIDGE. KIRLOSKAR PART NO. - DV8.072.108.0.00. QTY. - 01 NOS. (5). PRE FUEL FILTER. KIRLOSKAR PART NO. 6H.508.04.0.PR. QTY. - 01 NOS. (6). CENTRIFUGAL FILTER SERVICE KIT FOR DV. KIRLOSKAR PART NO. - DV0.999.40.0.00. QTY. - 01 NOS. (7). ASSEMBLY UNIT FOR AIR FILTER PRIMARY AND SECONDARY. KIRLOSKAR PART NO. - DV0.506.115.0.PR. QTY. - 01 NOS. (8). UREA FILTER. KIRLOSKAR PART NO. - SH.085.16.0.SP. QTY. - 02 NOS. (9). SUCTION CONNECTION PIECE. KIRLOSKAR PART NO. - SH.085.21.0.SP. QTY. - 02 NOS. (10). LUBE OIL CI4+ GRADE 15W40 (50 LTR). QTY. - 01 NOS. | Set | 24.00 | 1,01,675.5 | 24,40,212 |
| 111 | C- Check maintenance kit of Kirloskar CPCB- IV engine Model No. DV8 ETA4G3 (CPCV- 4+). (1). FINAL FILTER CARTRIDGE. KIRLOSKAR PART NO. - DV8.072.108.0.00. QTY. - 01 NOS. (2). CENTRIFUGAL FILTER SERVICE KIT FOR DV. KIRLOSKAR PART NO. - DV0.999.40.0.00. QTY. - 01 NOS. (3). ASSEMBLY UNIT FOR AIR FILTER PRIMARY AND SECONDARY. KIRLOSKAR PART NO. - DV0.506.115.0.PR. QTY. - 01 NOS. (4). LUBE OIL CI4+ GRADE 15W40 (50 LTR). QTY. - 01 NOS. (5). KIRLOSKAR CARE GENUINE COOLANT PREMIX 5 LTR CAN. KIRLOSKAR PART NO. - 82.020.35.1.05. QTY. - 03 NOS. (6). LUBE OIL FILTER BY PASS SPIN ON. KIRLOSKAR PART NO. - DV0.014.67.0.00. QTY. - 01 NOS. (7). LUBE OIL FILTER-FULL FLOW-SPIN ON KIRLOSKAR LOGO REVERSAL APPLICATION. KIRLOSKAR PART NO. - DV0.014.72.0.PR. QTY. -01 NOS. (8). PRE FUEL FILTER. KIRLOSKAR PART NO. - 6H.508.04.0.PR. QTY. - 01 NOS. (9). V BELT 2JBX58 PITCH LENGTH 1550. KIRLOSKAR PART NO. - DV2.016.02.0.00. QTY. - 01 NOS. (10). GASKET (FOR ROCKER COVER). KIRLOSKAR PART NO. - DV2.067.26.0.PR. QTY. - 08 NOS. (11). SUCTION CONNECTION PIECE. KIRLOSKAR PART NO. - 5H.085.21.0.SP. QTY. - 02 NOS. (2). UREA FILTER. KIRLOSKAR PART NO. - 5H.085.16.0.SP. QTY. - 02 NOS. (13). RUST BUSTER. KIRLOSKAR PART NO. - 82.060.10.0.92. QTY. - 01 NOS. | Set | 8.00 | 1,09,037.5 | 8,72,300 |
| Schedule total | ₹1,14,40,084.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Correctionslips.pdf
ATTACHMENT
Mandateform.pdf
ATTACHMENT
Annexures.pdf
ATTACHMENT
Declerationregardingretdrlyemployee.pdf
ATTACHMENT
11thcorrectionslip.pdf
ATTACHMENT
ExplanatoryScheduleKirloskar23.04.26.pdf
ATTACHMENT
specialconditionforkirloskar.pdf
ATTACHMENT
GuidelinesforEscortingoffpowerCar_compressed.pdf Guidelines for escorting
ATTACHMENT
ACS11ofGCC2022dated13.03.2026.pdf
ATTACHMENT
LHBManual-5thCorrectionSlip.pdf
ATTACHMENT
RBletterJune2025.pdf
ATTACHMENT
MaintenanceManualPowerCar.pdf
ATTACHMENT
RBletter2020.pdf
ATTACHMENT
RBltr.No.2018CE-ICT9.pdf
ATTACHMENT
GuidelinesforEscortingoffpowerCar_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .