Civil, Electrical and allied works for the construction of Physiotherapy unit in Township at HAL, Hyderabad

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II

Description of item

Earth work excavation in all kinds of Soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials in all kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. : All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming & watering, lead up to 50m & all lift.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work in cement mortar by manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. : For thickness of tiles 10 mm to 25 mm

Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for Post Construction anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below plinth protection concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

Diluting and injecting chemical emulsion for Post Construction anti-termite treatment (excluding the cost of chemical emulsion). Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing.

Providing and laying in position cement concrete of 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) grade excluding the cost of centering and shuttering - All work up to plinth level.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level.Concrete of M30 grade with minimum cement content of 350 kg /cum

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centring and shuttering including strutting, propping, etc. and removal of form for the following items of RCC work at all depths and heights complete as per drawings, specifications and as per direction of Engineer-in-charge. : Foundations, footings, bases of columns, etc. for mass concrete.

Centring and shuttering including strutting, propping, etc. and removal of form for the following items of RCC work at all depths and heights complete as per drawings, specifications and as per direction of Engineer-in-charge. : Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting, propping, etc. and removal of form for the following items of RCC work at all depths and heights complete as per drawings, specifications and as per direction of Engineer-in-charge. : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting, propping, etc. and removal of form for the following items of RCC work at all depths and heights complete as per drawings, specifications and as per direction of Engineer-in-charge. : Columns, Pillars, Piers, Abutments, Posts and Struts.

Centring and shuttering including strutting, propping, etc. and removal of form for the following items of RCC work at all depths and heights complete as per drawings, specifications and as per direction of Engineer-in-charge. : Stairs, (excluding landings) except spiral-staircases

Centring and shuttering including strutting, propping, etc. and removal of form for the following items of RCC work at all depths and heights complete as per drawings, specifications and as per direction of Engineer-in-charge. : Weather shade, Chajjas, corbels etc., including edges

Centring and shuttering including strutting, propping, etc. and removal of form for the following items of RCC work at all depths and heights complete as per drawings, specifications and as per direction of Engineer-in-charge. : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Add for using extra cement in the items of design mix over and above the specified cement content therein. (one quintal is measured and paid as Each)

Brick work with flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

Providing and rendering 6mm cement plaster of mix for celling, including cost of all materials, tools, scaffolding and curing etc. complete all as specified and as directed by EIC: 1:3 (1 cement : 3 fine sand)

Providing and rendering cement plaster including cost of all materials, tools, scaffolding and curing etc. complete all as specified and as directed by EIC: 12 mm thick cement plaster with cement mortar 1:6 (1 cement: 6 coarse sand) on internal surfaces of walls (brick or concrete surfaces) finished smooth with trowel including scafolding, curing etc., complete at all heights : (Internal finishing side)

Providing and rendering cement plaster including cost of all materials, tools, scaffolding and curing etc. complete all as specified and as directed by EIC: 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.

Providing and rendering cement pointing including cost of all materials, tools, scaffolding and curing etc. complete all as specified and as directed by EIC: Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): Flush / Ruled/ Struck or weathered pointing

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. : per bag of 50kg cement used in the mix (per bag of 50kg cementused in the mix is measured and paid as Each)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.: Two coats

Finishing walls with Ready mixed premium Acrylic emulsion paint (Company depot inted ) having VOC less than 50 gm/ ltr and UV resistance as per IS 15489 :2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with Silicon additives: on new work (Two or more coats) applied @1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @0.90 ltr/10 Sqm

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing fly proof stainless steel grade 304 wire gauge mesh to windows and clerestory window using wire gauge mesh with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete with 12 mm mild steel U beading including cost of material, Ubeading for fixing, labour for fixing all as directed by EIC

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry@ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.: Size of Tile 800x800 mm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. : 300x300mm Size.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.: 300x600mm Size.

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick

Providing and fixing 18 mm thick gang saw cut, Granite stone slab( Area of slab over 0.5 sqm) of colour black,cherry/Ruby red, mirror polished, premoulded and prepolished, machine cut for kitchen platforms of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth : Granite Stone of approved shade

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. Granite of any colour and shade

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak-3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made single extruded 18mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded - Frame size 45 x 70 mm of WPC (Wood Polymer Composite) solid door/window/ clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 15 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. : 300x16 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 15 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. : 250x16 mm

Providing and fixing aluminium hardware : Tower bolts- 250x10 mm ISI marked anodised (anodic coating not less than grade AC 15 as per IS :1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing aluminium hardware ISI marked anodised (anodic coating not less than grade AC 15 as per IS :1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete.: Aluminum handles 125mm long

Providing and fixing aluminium hardware ISI marked anodised (anodic coating not less than grade AC 15 as per IS :1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete. : Tower bolts : 250x10 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 15 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Al. hanging floor door stopper.: Twin rubber stopper

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) Colour Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) :: For fixed portion

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene gaskit etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) Colour Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).

Providing and fixing stainless steel (SS 316 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in charge complete.:: 205 x 19 mm

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. : Upto 5mm depth and 5 mm width

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM / Neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM / Neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes: 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.: Coupler : 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.: Bend 87.5° : 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.: Shoe (Plain) : 110mm shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.: 110 mm

Making khurras 45x45 cm with average minimum thickness of 5 cmcement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarsesand) and a coat of neat cement, rounding the edges and makingand finishing the outlet complete.

Providing and fixing tiled false ceiling of specified materials of size 595x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 12.5 mm thick square edge PVC

Providing and applying fibre reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers having SunReflectivity Index (SRI) of 105 on top of concrete roof in three [email protected] litre/ 10 sqm. One coat of self-priming of elastomericwaterproofing liquid (dilution with water in the ratio of 3:1) and twocoats of undiluted elastomeric waterproofing liquid (dry film thicknessof complete application/system not less than 500 microns). Theoperation shall be carried out after scrapping and properly cleaningthe surface to remove loose particles with wire brushes, complete inall respect as per the direction of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid , 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, make : Hindware Code : Sleek Plus Single Flush Star white, with all fittings and fixtures / Hindware / Paryware / equivalent . :W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: : White Vitreous China Wash basin size 630x450 mmwith a single 15 mm C.P. brass pillar tap

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.:Semi rigid pipe : 32 mm dia

Providing and fixing on wall face unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. : 110 mm diameter

Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour : Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

Providing and fixing CP brass 32mm size bottle trap of approved quality and make and as per the directions of Engineer-in-charge.

Providing and fixing CP Brass 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 500 gms

Providing and fixing CP Brass urinal cock of approved quality and colour : 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 450 gms

Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. : Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.: 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: External Work : 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: External Work : 32 mm nominal dia Pipes

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 100 mm dia Ductile Iron Class K-9 pipes

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter

Providing and fixing square-mouth S.W. gully trap grade 'A'¿ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With F.P.S. Bricks class designation 35

Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore with 45cm length.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar

Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: : Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

POINT WIRING: Supply & fixing of following light points etc with 2 runs of 1.5 sq. mm FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including supply & fixing of 10 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. Make: Havells / fincab / Finolex 2 Light points controlled by one switch 5 / 10 A modular type SP switch Make: Legrand/Siemens/L&T/GE.

PROVIDING OF LED LIGHT LUMINAIRE: Supply and replacement of (12 - 15) Watt led cirular/Square recess / surface mounted fittings as per direction of EIC: Make : Philips/Wipro/CGL/FA/BAJAJ

Providing of LED Light Fixtures: Supply, installation, testing & commissioning of Recessed Mounted 2 X 2 ft (36-40) watt LED Full out put Luminaries with CRCA power coated With high diffuser efficiency of 3600 lumens with necessary fixing accessories as per site & inter-connection complete Make: philips / CGL / Wipro / FA /Havells / Bajaj

PROVIDING OF LED LIGHT LUMINAIRE: Supply & Fixing of 4 feet 2*20 Watt, Industrial batten with two numbers Industrial LED Tube lights on wall with necessary accessories. make : Philips/Wipro/CGL / / FA /Havells / Bajaj

BLDC ceiling fans: Supply and provisioning of BLDC ceiling fans, 1200mm sweep, 5 star rated on existing roof with electronic Regulator, downrod of required length as per site condition and all fixing accessories as directed by EIC. Make: Crompton / Havells / Orient / Usha / Atomberg

Exhaust fan:Supply, Fixing of single phase 9 inches / 250mm heavy duty industrial type exhaust fan with double ball bearing along louvers (GI material) suitable nut bolts and inter conection with the existing power point, scope includes provision of hole for exhaust fan to be done on wall Make: Almonard / Khaitan / Crompton / Havells

Supplying and fixing normal call bell/ buzzer suitable for single phase, 230 volts, complete as required. (Legrand-Myrius/Honeywell-Horizon 2.0/ABB-IVIESchneider-Clipsal X)

20 PAIR TELEPHONE CABLING: Supply and Iaying of 20 Pair unarmoured 0.50 mm dia of each strand, telephone cable in a suitable rigid PVC conduit of 2mm thickness with all necessary bend, junction boxes and other acceessories. Make: Amp /Finolex/ Dlink / Mazda / polycab

10 PAIR TELEPHONE CABLING: Supply and Iaying of 10 Pair unarmoured 0.50 mm dia of each strand, telephone cable in a suitable rigid PVC conduit of 2mm thickness with all necessary bend, junction boxes and other acceessories. Make: Amp /Finolex/ Dlink / Mazda / polycab

5 PAIR TELEPHONE CABLING: Supply and Iaying of 5 Pair unarmoured 0.50 mm dia of each strand, telephone cable in a suitable rigid PVC conduit of 2mm thickness with all necessary bend, junction boxes and other acceessories. Make: Amp /Finolex/ Dlink / Mazda / polycab

LAN CABLING:Supply and Laying of Cat-6 cable in a suitable rigid/Flexible PVC conduit of 2mm thickness with all necessary bend, junction boxes and other accessories as per site conditons.Make: Amp /Finolex/ Dlink / polycab

PROVIDING MODULAR TELEPHONE & LAN JACKS: 1 No, RJ 11 Telephone Jack double lines with shutter. Make: Legrand / Siemens

PROVIDING MODULAR TELEPHONE & LAN JACKS: 1 No, RJ 45 UTP Information Out let Category 5 - 1 module. Make: Legrand / Siemens

POWER WIRING: Providing and laying of 2 runs of 2.5 sq mm and 1 runs of 1.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Polycab/Havells/Finolex only)

POWER WIRING: Providing and laying of 4 runs of 4.0 sq mm and 2 runs of 2.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

POWER WIRING: Providing and laying of 4 runs of 6.0 sq mm and 2 runs of 4 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

POWER WIRING: Providing and laying of 4 runs of 10 sq mm and 2 runs of 6 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

Providing of Independent Modular Sockets & Switches: Supply and fixing of following items with 2 mm thick GI modular box independent concealed in the wall with inter connection complete. 3 No, 6 Amp 3/2 pin multiple universal socket controlled one no.16 Amp switch & 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch and 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch. Make: Legrand/Siemens for 230V Supply

PROVIDING OF MODULAR TYPE IN-DEPENDENT SWITCHES & SOCKETS: Supply and fixing of 2 Nos 6/16 amps 3 pin multiple socket controlled by 2 No. 6/16 amps SP MODULAR switch of approved quality, color & design shall be mounted on suitable cover plate with suitable MS box with inter connection complete as per site requrement.The box shall be mounted on concelled/ surface of wall / floor with all requred ccessories as per site condition. Make:Legrand / Crabtree

SINGLE PHASE INDUSTRAIL SOCKET: Supply fixing, testing and proveing of 20A rated industrial socket distribution boards Universal mounting type with 2P+E 3 PIN controlled by suitable rating equvalent 2 pole MCB as per site requirement by supplying all necessory fixing accessories. Make:Legrand / Havells / L&T.

MCCB / MCB DISTRIBUTION BOARD Supply, Installation, testing and commissioning of the following factory made MCB / MCCB Distribution Boards (Double door type) IP-54 Cubicle / Enclosure made of 1.6 mm thick CRCA sheet steel, powder coated with approved shade and partitions to segregate phases with suitable 2 Nos of top & bottom cable entry end boxes. The DBs & Cable entry end boxes shall be mounted recessed / surface mounted on wall with suitable iron angle frame & all fixing accessories as per site and inter connection with number sleeves & crimping lugs complete. The rate shall include supply & fixing of 2 Nos (top & bottom) cable end boxes suitable for following DBs.make: Legrand POWER DB 8-Way TPN MCCB DB Incomer:. 1 No,160 A 4POLE (Icu=36 Ka) MCCB Out going: 04 Nos, 63 A ( Type 'C') TP MCB 04 Nos, 32 A ( Type 'C') TP MCB

MCCB / MCB DISTRIBUTION BOARD Supply, Installation, testing and commissioning of the following factory made MCB / MCCB Distribution Boards (Double door type) IP-54 Cubicle / Enclosure made of 1.6 mm thick CRCA sheet steel, powder coated with approved shade and partitions to segregate phases with suitable 2 Nos of top & bottom cable entry end boxes. The DBs & Cable entry end boxes shall be mounted recessed / surface mounted on wall with suitable iron angle frame & all fixing accessories as per site and inter connection with number sleeves & crimping lugs complete. The rate shall include supply & fixing of 2 Nos (top & bottom) cable end boxes suitable for following DBs.make: Legrand POWER DB 8-Way TPN MCCB DB Incomer:. 1 No,125 A 4POLE (Icu=36 Ka) MCCB Out going: 06 Nos, 16 A ( Type 'C') SP MCB 06 Nos, 32 A ( Type 'C') SP MCB 04 Nos, 32 A ( Type 'C') TP MCB

COPPER PLATE EARTHING:Making Earth pit complete with copper plate 60 cm x 60 cm x 3.15 mm thick electrode and 25 mmx3 mm copper strip. Copper plate is to be buried directly in ground with top edge of the plate not less than 3.0 metres below normal ground level. Copper strip to be bolted with the earth plate at three points by means of copper bolts, nuts, check nuts and washers. Earth strip to be extended upto earth test point in earth chamber at ground level. Scope of work includes excavation of earth & refilling, drilling hole to electrodes, supply and covering the earth plate with alternate layer of salt and charcoal (not less than 15.0 cm on both side of plate), PCC pit and CI cover, Funnel with watering pipe, wire mesh and copper lugs etc as specified, GI protection pipe of size as specified for protection of earthing lead from top of earth plate upto earth chamber, laying copper strip of length of 5.0 mtrs connecting from test point to mainswitch or switch board or equipment and any other work necessary to complete making earth pit in all respect. Note: Earth resistance to be achived 0.5 ohms by connecting all eartpits as grid as directed by EIC

EARTH STRIP:Supply & laying of 25 mm x 5 mm Copper Strip on porciline insulators clamped to walls at distance of one meter or on cable trays, run in pipes, run underground etc., as required including interconnection between the earth stations etc., complete as required conforming to IS: 3043-1987. Scope of work includes supply of calmping materials necessary to complete work in all respect as per direction of EIC.

LT CABLING: Supply & laying of 3.5 core x 70 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by supplying all required fixing accessories as per site condition as directed by the EIC. scope includes cable end terminations with suitable glands. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

LT CABLING: Supply & laying of 3.5 core x 50 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. scope includes cable end terminations with suitable glands. Make: Gloster/ Polycab / Finolex. Scope includes cable end terminations and as directed by EIC

MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 32A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 63A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

FIRE POINTS: Supply, fixing of Photothermal detector on existing roof/struss & integrating with existing Fire Alram system (Make: Bosch) with fixing accessories as per site condtion.

FIRE POINTS: Supply, laying & integrating with existing Fire Alarm system of 2 core 1.5 sqmm fire alarm armoured cable with annealed copper conductor having XLPE insulation, steel wire armouring and FRLS outer sheath on surface of the wall/roof/struss integrating with existing Fire Alram system (Make: Bosch) with fixing accessories as per site condtion.

FIRE POINTS:Supply, installation Testing and configuration of Base sounder indoor red integrating with existing Fire Alram system (Make: Bosch) with fixing accessories as per site condtion.

FIRE POINTS:Supply, installation Testing and configuration of Strobe for sounder base integrating with existing Fire Alram system (Make: Bosch) with fixing accessories as per site condtion.

FIRE POINTS:Supply, installation Testing and configuration of Intelligent addressable Manual cell point with key integrating with existing Fire Alram system (Make: Bosch) with fixing accessories as per site condtion.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).