Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-AOC | ₹5.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹5.1 LRejected-Finance | ₹5.1 L | L2 | Rejected-Finance Due to high rate quoted in financial bid |
| 3 | L3₹5.9 LRejected-Finance VILLAGE DAGOH P O THANDOG MORNI DISTT PANCHKULA HARYANA | PANCHKULA | HARYANA | 133301 | ₹5.9 L | L3 | Rejected-Finance Due to higher rate quoted in financial bid |
| 4 | L4₹6.3 LRejected-Finance CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹6.3 L | L4 | Rejected-Finance Due to higher rate quoted in financial bid |
| 5 | L5₹6.4 LRejected-Finance 1090 GROUND FLOOR SECTOR 18 C CHANDIGARH | ₹6.4 L | L5 | Rejected-Finance Due to highest rate quoted in financial bid |
Tender Value
₹6.7 L
EMD Value
₹13,325
Closing Date
1 May 2026, 3:00 pmClosed
Executive Engineer, Horti. Divn 2, Chd
Executive Engineer, Horti. Divn 2, Chd Near Sampark Centre Sector 23 Chd
Tender for Installation of Open-Air Gym and play equipments at CPWD Residential Area, Sector 7, Chandigarh. 18th MPLADS Work.
2026_CHD_91968_1
Hort./SA-I/2026/2723052
Open Tender
Iron/Steel Materials
30 days
Tender for Installation of Open-Air Gym and play e
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹13,325
18 May 2026
24 Apr 2026
1 May 2026
24 Apr 2026
1 May 2026
24 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of Chest Press Double outdoor Gym Equipment complete in all respects having following specifications.
Size / Dimensions
Length -1200 millimetre
Width - 700 millimetre
Height - 1800 millimetre
Maximum weight -120 kilogram
Material:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure strength, durability, and corrosion resistance. The main central pipe shall be an 80 mm NB GI pipe, while the handle frame and sheet frame shall each consist of 40 mm NB GI pipes. The connecting links shall be made of 32 mm NB GI pipes, and the footrest pipe shall also be 32 mm NB GI. The mild steel (MS) foundation plate shall have a minimum thickness of 12 mm. The foundation pipe shall consist of a GI pipe anchored 750 mm deep and supported with an MS angle of 25×25×4 mm for stability. The seat and backrest shall be made of high-density polyethylene (HDPE) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to enhance durability and resistance to corrosion. The movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. The closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (FRP) closing caps having a minimum thickness of 3 mm. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.
Colour:- Green
Paint finish- Power coated, UV resistant
Paint coating thickness (min) – 100 micrometer
Warranty - 3 years.
Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. | - | each | - | - |
| 2 | Providing and Fixing of Parallel Bars outdoor Gym Equipment complete in all respects having following specifications.
Size/Dimensions
Length- 900 millimetre
Height – 800 millimetre
Material:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure strength and durability. The vertical or standing pipes shall be 40 mm NB with a thickness of 2.9 mm, and the horizontal pipes shall also be 40 mm NB with a thickness of 2.9 mm. The foundation pipe shall consist of a GI pipe anchored 500 mm deep and supported with a mild steel (MS) angle of 25×25×4 mm. The nominal bore of the foundation pipe shall be 40 mm NB with a thickness of 2.9 mm. The MS foundation plate shall have a minimum thickness of 12 mm. All nuts and bolts used for assembly shall be made of stainless steel to provide durability and resistance to corrosion. The open ends of all pipes, bearing bushes, and bases shall be fitted with fibre-reinforced plastic (FRP) caps having a minimum thickness of 2 mm. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance under outdoor conditions.
Colour:- Paint finish- Power coated, UV resistant
Paint coating thickness (min) – 100 micrometer
Warranty - 3 years.
Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. | - | each | - | - |
| 3 | Providing and fixing of Three wheel shoulder Builder/ Arm wheel- outdoor Gym Equipment complete in all respects having following specifications.
Size / Dimensions
Height of central Pole from ground -1524 millimetre
Outside diameter of first wheel - 850 millimetre
Outside diameter of second wheel - 800 millimetre
Outside diameter of third wheel - 650 millimetre
Height of first wheel from ground - 1220 millimetre
Height of second wheel from ground - 1200 millimetre
Height of third wheel from ground - 1180 millimetre
Maximum weight -120 kilogram
Material:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality and durability. The main central pipe shall be constructed using a 125 mm NB GI pipe, while the ring (wheel) shall be made of a 40 mm NB GI pipe. The spokes of the wheel shall consist of 15 mm NB GI pipes, with a total of six spokes per wheel. The foundation pipes shall be GI pipes anchored 750 mm deep, supported with mild steel (MS) angles of 25×25×4 mm, and shall have a nominal bore of 125 mm. The MS foundation plate shall have a minimum thickness of 12 mm. All nuts and bolts used for assembly shall be made of stainless steel to ensure durability and resistance to corrosion. The movement mechanism shall be equipped with ball bearings, which shall be self-lubricating and sealed to provide protection against rain, dust, and other environmental factors. The open ends of pipes, bearings, bushes, and bases shall be fitted with high-density polyethylene (HDPE) closing caps having a minimum thickness of 2 mm. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance in outdoor conditions.
Colour - Paint finish- Power coated, UV resistant
Paint coating thickness (min) – 100 micrometer
Warranty -4 years.
Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. | - | each | - | - |
| 4 | Providing and fixing of double Surf Board - outdoor Gym Equipment complete in all respects having following specifications.
Size / Dimensions
Length - 950 millimetre
Width - 700 millimetre
Height - 1300 millimetre
Maximum weight -120 kilogram
Material - All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality, strength, and durability. The main central pipe shall be made of 150 mm NB GI pipe with a thickness of 4.5 mm. The movement frame pipe shall be 32 mm NB with a thickness of 4 mm, while the connecting link pipes shall be 32 mm NB with a thickness of 2.6 mm. The handle frame pipe shall be 25 mm NB with a thickness of 2.6 mm. The foundation pipes shall consist of GI pipes anchored 500 mm deep and supported with mild steel (MS) angles of 25×25×4 mm, having a nominal bore of 100 mm. The MS foundation plate shall have a minimum thickness of 12 mm. The movement mechanism shall be equipped with ball bearings that are self-lubricating and sealed to provide protection against rain, dust, and other environmental factors. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure long-lasting durability and corrosion resistance. The footrest shall be made of fibre-reinforced plastic (FRP) for strength and user comfort. The open ends of all pipes, bearings, bushes, and bases shall be fitted with GI closing caps having a minimum thickness of 3 mm. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance in outdoor conditions.
Colour - Paint finish- Power coated, UV resistant
Paint coating thickness (min) – 80 micrometer
Warranty - 2 years.
Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. | - | each | - | - |
| 5 | Providing and fixing of Air walker/Stroller Single outdoor Gym Equipment complete in all respects having following specifications.
Size / Dimensions
Length - 1100 millimetre
Width - 460 millimetre
Height - 1480 millimetre
Maximum weight – 100 kg.
Material - All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure strength, durability, and corrosion resistance. The main frame shall be made of 100 mm NB GI pipe, while the leg movement frame shall consist of 40 mm NB GI pipe, and the handle frame shall be constructed using 32 mm NB GI pipe. The movement mechanism shall be equipped with ball bearings that are self-lubricating and sealed to provide protection against rain, dust, and other environmental factors. The footrest shall be made of high-density polyethylene (HDPE) for enhanced durability and user comfort. The foundation pipes shall be GI pipes anchored 750 mm deep and supported with mild steel (MS) angles of 25×25×4 mm. The nominal bore of the foundation pipe shall be 100 mm, while the MS foundation plate shall have a minimum thickness of 10 mm. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure long-lasting durability and corrosion resistance. The open ends of all pipes, as well as the bearings, bushes, and bases, shall be fitted with HDPE closing caps having a minimum thickness of 2 mm to provide a neat finish and additional protection. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.
Colour - Paint finish- Power coated, UV resistant
Paint coating thickness (min) – 100 micrometer
Warranty - 3 years.
Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. | - | each | - | - |
| 6 | Providing and fixing of Double Twister (One standing and One Sitting) outdoor Gym Equipment complete in all respects having following specifications.
Size / Dimensions
Length - 1400 millimetre
Width - 680 millimetre
Height - 900 millimetre
Weight - 100 kilogram (Maximum)
Material - All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality, strength, and durability. The main central pipe shall be made of 100 mm NB GI pipe with a thickness of 4.5 mm. The standing/sitting twister frame pipe shall be 32 mm NB GI pipe with a thickness of 4 mm, while the rotating disk support pipe at the bottom shall be 80 mm NB GI pipe with a thickness of 3.2 mm. The handle frame pipe shall be 25 mm NB GI pipe with a thickness of 3.2 mm. The foundation pipes shall consist of GI pipes anchored 750 mm deep and supported with mild steel (MS) angles of 25×25×4 mm, having a nominal bore of 100 mm. The MS foundation plate shall have a minimum thickness of 10 mm. The movement mechanism shall be equipped with roller bearings that are self-lubricating and sealed to provide protection against rain, dust, and other environmental elements. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure durability and corrosion resistance. The footrest shall be made of aluminum casting for enhanced strength and stability. The open ends of all pipes, as well as bearings, bushes, and bases, shall be fitted with fibre-reinforced plastic (FRP) closing caps having a minimum thickness of 2 mm to provide a smooth finish and additional protection. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance in outdoor conditions.
Colour – Blue (As per Buyers requirement)
Paint finish- Power coated, UV resistant
Paint coating thickness (min) – 80 micrometer Warranty - 2 years.
Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. | - | each | - | - |
| 7 | Providing and fixing of Leg Press Double Outdoor Gym Equipment complete in all respects having following specifications.
Size / Dimensions
Length - 1700 millimetre
Width - 700 millimetre
Height - 2000 millimetre
Weight - 120 kilogram (Maximum)
Material - All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality, strength, and durability. The main central pipe shall be made of 100 mm NB GI pipe with a thickness of 4.5 mm. The thickness of seat and Back rest 6 mm, Foot rest is of Fiber reinforced plastic. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure durability and corrosion resistance. The footrest shall be made of aluminium casting for enhanced strength and stability. The open ends of all pipes, as well as bearings, bushes, and bases, shall be fitted with fibre-reinforced plastic (FRP) closing caps having a minimum thickness of 3 mm to provide a smooth finish and additional protection. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance in outdoor conditions.
Colour – Blue (As per Buyers requirement)
Paint finish- Power coated, UV resistant
Paint coating thickness (min) – 100 micrometer Warranty - 3 years.
Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. | - | each | - | - |
| 8 | Providing and fixing of Sit Up Board Outdoor Gym Equipment complete in all respects having following specifications.
Size / Dimensions
Length - 1524 millimetre
Width - 1524 millimetre
Height - 1000 millimetre
Weight - 100 kilogram (Maximum)
Material - All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality, strength, and durability. The main central pipe shall be made of 80 mm NB GI pipe with a thickness of 3.2 mm. The standing/sitting twister frame pipe shall be 32 mm NB GI pipe with a thickness of 2.6 mm, while the rotating disk support pipe at the bottom shall be 80 mm NB GI pipe with a thickness of 3.2 mm. The handle frame pipe shall be 25 mm NB GI pipe with a thickness of 2.6 mm. The foundation pipes shall consist of GI pipes anchored 500 mm deep and supported with mild steel (MS) angles of 25×25×4 mm, having a nominal bore of 80 mm. The MS foundation plate shall have a minimum thickness of 10 mm. The movement mechanism shall be equipped with roller bearings that are self-lubricating and sealed to provide protection against rain, dust, and other environmental elements. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure durability and corrosion resistance. The footrest shall be made of aluminum casting for enhanced strength and stability. The open ends of all pipes, as well as bearings, bushes, and bases, shall be fitted with fibre-reinforced plastic (FRP) closing caps having a minimum thickness of 2 mm to provide a smooth finish and additional protection. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance in outdoor conditions.
Colour - Blue
Paint finish- Power coated, UV resistant
Paint coating thickness (min) – 80 micrometer Warranty - 4 years.
Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. | - | each | - | - |
| 9 | Double Swing
Providing and fixing double swing structure consisting of 65mmx14swg,Electric Resistance welded (ERW) M.S pipe 2’-0” below G.L grouted with c.c 1:2:4 block size 1’-6’’x 1’-6’’x2’-0’’ welded at bottom with 9’’ long anchor piece of angle iron size 50x50x6 mm 2 nos in cross.
1. Base piller 65mm x 14 swg ERW round pipe.
2. Horizontal pipe same 65 mm.
3. Tested chain 8mm ms seat.
As per entire satisfaction of Engineer-in-charge. | - | each | - | - |
| 10 | Sea Saw four Seater
Providing and fixing sea saw structure consisting of 65mmx65mmx14swg,Electric Resistance welded (ERW) M.S pipe 2’-0” below G.L grouted with c.c 1:2:4 block size 1’-6’’x 1’-6’’x2’-0’’ welded at bottom with 9’’ long anchor piece of angle iron size 50x50x6 mm 2 nos. in cross.
1. Base pipe 65 mm x 65 mm x 14 swg sq section.
2. Horizontal section 50mm x 50mm x 14 swg.
3. Heavy duty bush.
As per entire satisfaction of Engineer-in- charge. | - | each | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.51 MB
BOQ_112530.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid