Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-AOC R O VIJHARA LOWDARA BANDIPORA KASHMIR J K 193502 | BANDIPORA | JAMMU AND KASHMIR | 193502 | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹34.5 L+₹63,436.50 (1.87%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹38.7 L+₹4.8 L (14.2%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹63,000
Closing Date
4 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPL REP TO CERTAIN BUILDINGS AT KANZALWAN AND NIRU UNDER STN HQ DAWAR
2023_MES_611642_1
GE 874/EWS-46/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹63,000
Yes
30 Oct 2023
1 Aug 2023
5 Sept 2023
1 Aug 2023
4 Sept 2023
21 Aug 2023
1 Aug 2023 - 8 Aug 2023
Amount
BR and EM Portion
Demolition of cement conc (Un - reinforced ) in ground floors and pavings n exc. 15cm thick.(Below or above ground level).
75mm thick plain cement concrete 1:4;8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as directed by Engr-in-Charge.
M&L Non-skid ceramic coloured tiles 7-8 mm thick,area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg).
M&L Chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed of 1:4 cement mortar
M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.
Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar pattern roof covering .
S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw as specified.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet.
M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling
M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in lining.
All as per item above but except plywood.
M&L for Preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
M&L for Preparation of old painted surfaces and applying two coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
M & L Plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails.
Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work .
M & L second class soft wood in scantling clean swan complete all as specified
All as per item above but except timber.
Dismantling of boarding of any description fitten in any position with nails
S&F 20mm thick 2nd class softwood boarding , planed one side , with butt joints and fixed with nails in facia eaves boarding complete all as specified and direced by Engr-in-Charge.
M&L 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps.
All as per item above but fixing only.
S&F 25mm thick 2nd class softwood boarding in floor, planed one side, with butt joints and fixed with nails
All as per Item above but except timber for repairs in existing floors including cutting out, peicing, heading joints complete all as specified.
Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm(w/o taking off shutters from chowkhat)
Taking down chowkat with shutters n. exc.1.5Sqm (w/o taking off shutters from chowkhat).
S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified.
S & F plain framed, panelled shutters 35mm thick 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides,or of veneered particle board med density, wood particle board with commercial face or 9mm BWP plywood fitted to chowkat.
S & F glazed & skeleten shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) fitted to chowkhats.
S & F glazed & skeleten shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats.
S & F in Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beads.
S&F 4 mm Sheet glass ordinary quality in square n.exc. 0.5Sqm in each pane.
S&F 100 mm long butt hinges extruded aluminium anodised.
S&F 75 mm size mild steel butt hinges medium weight.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section.
S&F 100 mm long aluminium anodised barrel tower bolt of exturded section.
S&F aluminium anodised alloy handles fabricated type 150mm size of handle.
S&F 100 mm long aluminium handles cast type anodised.
S&F 300mm, MS ordinary rat tailrod pattern springs including roller and roller plate complete.
S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section.
S & Fixed in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.
Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles.
M&L for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed.
M&L for Random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted built in CM 1:4 complete all as specified and directed
All as per item above but except stone.
M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) as in coping,plinth band ,bed block including rounded or chamfered angle as directed including necessary formwork etc.
Taking down of cement plaster of any desc including racking out of joints hacking for keys and scrubing down with water etc
M&L of Rendering 15mm thick on stone masonry surfaces or other than fair faces in cement motar 1:4 finished even and smooth (without using extra cement).
M&L for Preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed.
Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified.
S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed
S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.
S&F Stop valves/angle valve cast copper alloy,fancy type ,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe,in repair.
S&F in repairs pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed.
S&F in repair Bib taps cast copper alloy ,chromium plated,with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore.
S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed
S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm
S&F in repair Grating doom 100mm dia of PTMT (minimum weight 25gms) suitable for floor taps, all as specified and directed.
S&F 500 Ltr capacity PVC water storage tank (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I, including dismantling of old tank.
S&F ball valves, high pressure,with polythene float and flynut complete ,20mm bore, in repair.
S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends ,in repair.
Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.
S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.
Lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified.
Lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified.
Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed.
S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls
S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches.
S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door.
S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door.
S&F PVC (SWR) reducers any radius 110mm bore.
S&F PVC (SWR) vent cowl 75mm dia.
M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement, in repair.
M&L Hard core of guage n exc 63 mm of broken stone or boulders.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.
Demolition of cement conc (Reinforced ) in ground floors and pavings n exc. 15cm thick.(Below or above ground level).
M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, lintel beams or shelves complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves/slabs incl supports, overhangs etc also splays between floors and beams etc all as specified.
M&L MS TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.
All as per item above but 6mm to 8mm dia as in stirupps/spacers complete all as specified and as directed.
Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.
Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed
Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.
All as per item above but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.
All as per item above but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.
All as per item above but wiring with 2.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.
S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.
S & F switch socket combination 2 in 1,5A, flush type .
S & F switch socket combination 5 pin 16A, flush type .
S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.
S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' curve series, all as specified and as directed by Engr -in-Charge.
S & F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve .all as specified and as directed by Engr -in-Charge.
M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings
S&F LED, 20 Watts, 4 ft, fittings complete with all accesories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.
Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire.
Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the platenot less than 1.5 mtr below normal ground level, connected galvanised earrth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shoen in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.
S&F 09W/10W Bulk head liminiares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix LED Bulb 9 Watt all as specified and directed by Engr-in-Charge.
Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size16 Sqmm 2 core complete all as spd and as directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding removing rubbish off the premises complete all as directed.
M&L M&L Vitrified Ceramic Tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F frosted or grouded/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed
S&F 75 mm long aluminium anodised barrel tower bolt of exturded section
S& F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm.
M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and as directed.
M&L of Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement motar 1:4 finished even and smooth (without using extra cement).
M &L of Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement motar 1:6 finished even and smooth (without using extra cement).
M&L for preparation of new or undecorated surfaces of wall and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic distmper over a coat of primer complete all as specified and as directed.
M&L 2nd class softwood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and doevetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall/ceiling panelling 15mm including cornice and beading as required and applying two coats of varnish over a filled coat of thin varnish after preparation of the surface, complete all as specified and as directed. Note : Framework shall be measured and paid separately.
M&L Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in ceiling complete.
M&L Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in walls complete.
M&L for Preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
M&L Fabrication & fitting of modular kitchen with cabinet/ shelves & wardrobe/ cupboard made out of 18 mm thick PVC board plain colour & laminated sheet with piano hinges (sheet shall be laminated over PVC board with solvent adhesiv at external faces) including providing cabinet for keeping baskets/ cutlery basket with handles/ door shutters all as specified and directed. NOTE : PVC sheet fittings & fixture will be measured and paid seperately as supply only.
Supply only 18 mm thick solid PVC board one side prelam sheet colour (Saluca sheet) of Make : Rajshree or equivalent all as specified and approved by Accepting Officer laminated with suitable cement solvent adhesive for shutter/ kitchen cabinet/ cup-boards/ partition wall/ wall cabinet and similar complete.
Supply only 100 mm size Double action spring brass, with phosphor bronze wire spring, bright polished hinges complete all as specified and directed
Supply only 150 mm dia brass handles, cast type, polished bright finish complete all as specified and directed
S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.
S&F 1000 Ltr capacity PVC water storage tank (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I, including dismantling of old tank .
M & L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed 15mm tk in CM 1:4 complete all as specified.
S&F switch socket combination 3 pin 5A, flush type.
S&F sheet metal closure for DBs (double door type) when MCBs to be used single pole and neutral 4 way including blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.
Supply and fixing in replacement round indoor lighting shape 10watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with integral drivers, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells/Syska/Wipro/Crompton/Surya/Hallonix or equivalent make as approved by GE.
M&L for providing/cutting the round/square hole of required size in fabricated wall finishing the distributed surfaces as per existing finishes complete all as spd and supply and fixing propeller PVC type AC ventilating fans, single phase, 230 volts, 250mm sweep completed fixed with proper size nut & bolts in fabricated wall, fixing the frame on exhaust side (outer surfaces of wall) and connecting with and including PVC insulated three core sqmm copper cable from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-Charge.
M/s Sajad Hussain Wani
M/S BEE AAY CONSTRUCTIONS
Bidder Name
M/s Sajad Hussain Wani
M/S BEE AAY CONSTRUCTIONS
M/s Shamas Parwaiz Bhat
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .