REPAIR/MAINT OF STEEL FURNITURE AND UPHOLSTERY OF SOFA SET AND PATTERN TRADE UNDER GE (I) KANPUR

Amount

Almirah Steel Med Steel/Almirah Med 1/2 H 1/2S (Drawing No FD 67/1032 for item Nos 1.00 to 7.00) S&F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock with duplicate keys (Make of Lock- LICO/RINA)

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with two coats of synthetic enamel paint of olive green/smoke grey shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green/smoke grey/red or any shade as approved over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. (Note for steel painting;- All steel surface shall be done with spray painting) (Make of Lock-LICO/RINA)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/any shade as approved over a coat of primer.

(g) M&L for painting two coat of synthetic Enamel paint with of Olive /Green/Smoke Gry shade as approved by Eng in Charge/GE over a coat of primer through spray machine both internally & externally to the following furniture articles. As per MES pattern viz F/FD/DB MAP Series or similar items including removing of dust, dirts, dents etc. applying putty to level the surface before primer/painting all specefied and shown on drgs and directed by Engr in Charge.

Almirah steel large/ Almirah steel large 1/2H 1/2S (Drawing No FD-67/1031 for item Nos 8.00 to 14.00) S&F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock duplicate keys (Make of Lock-LICO/RINA)

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with two coats of synthetic enamel paint of olive green/smoke grey/ any shade as approved over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/ any shadeas approved over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with two coats of synthetic enamel paint of olive green/smoke grey/ any shade as approved over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock-LICO/RINA)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/ any shade of approved quality over a coat of primer.

(g) M&L for painting two coat of synthetic Enamel paint with of Olive /Green/Smoke Gry shade as approved by Eng in Charge/GE over a coat of primer through spray machine both internally & externally to the following furniture articles. As per of MES pattern viz F/FD/DB MAP Series or similar items including removing of dust, dirts, dents etc. applying putty to level the surface before primer/painting all specefied and shown on drgs and directed by Engr in Charge.

Locker Bed Side steel (Drawing No FD-1029 for item Nos 15.00 to 20.00) S&F following components of Locker steel including dismantling unservicable one all as specified and as directed. (a) Handle 100 mm size chromium plated

Hasp & staple 100mm chromium plated

Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/ any shade of approved quality over a coat of primer.

Supply and fix new door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with two coats of synthetic enamel paint of olive green/smoke grey/ any shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed.

Supply and fix new curtain rod SS of size 20mm dia of 1.6mm wall thickness of locker steel.

(f) M&L for painting two coat of synthetic Enamel paint with of Olive /Green/Smoke shade as approved by Eng in Charge/GE over a coat of primer through spray machine both internally & externally to the following furniture articles. As per of MES pattern viz F/FD/DB MAP Series or similar items including removing of dust, dirts, dents etc. applying putty to level the surface before primer/painting all specefied and shown on drgs and directed by Engr in Charge.

Table dining 900x 900 mm steel (Drawing No FD-1009 for item Nos 21.00 to 24.00) S&F following components of Table dinning 900x900 mm steel including dismantling unservicable one all as specified and as directed. (a) Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

(b) Top 18mm thick prelaminated HDHMRboard BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.

(c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying two coats of synthetic enamel paint of olive green shade of approved quality.

(d) PVC shoe as per direction by Engr-in-Charge.

Table office officer/clerk steel (Drawing No FD-84/1003, 1004 for item Nos 25.00 to 33.00) S&F following components of Table office/clerk steel including dismantling unservicable one all as specified and as directed. (a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

(b) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with two coat of synthetic enamel paint over a coat of primer.

(c) Lock with duplicate keys(Make- Lico/Rina)

(d) Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with two coats of synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty ofTable office Officer/Clerk Steel.

(e) Top 18mm thick prelaminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.

(f) Top 18mm thick prelaminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge

(g) PVC shoe as per direction by Engr-in-Charge.

(h) M&L for painting two coat of synthetic Enamel paint with of Olive/Green/Smoke Gry shade as approved by Eng in Charge/GE over a coat of primer through spray machine both internally & externally to the following furniture articles. All are of MES pattern viz F/FD/DB MAP Series or similar items including removing of dust, dirts, dents etc. applying putty to level the surface before primer/painting all specefied and shown on drgs and directed by Engr in Charge.

(j) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of synthetic enamel paint of olive green/Smoke Grey/ any shade of approved both inside and outside complete all as specified and as directed for Table office clerk Steel.

Chair steel tubular with/ without arms (Drawing No FD-75 M for item Nos 34.00 to 38.00) S&F following components of Chair steel tubular with/ without arms made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one all as specified and as directed. (a) Seat frame

(b) Back frame

(c) Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size.

(d) MS Flat size 25 x 25 x 4mm thick welded at corner at bottom of the seat only to support and screwed with the seat .

(e) Preparation of surfaces and painting with two coats of synthetic enamel paint OG colour to chair steel tubular with/without arms including 4 Nos of PVC bushes to the bottom of the chair frame and 2 Nos of PVC caps on the top of the frame.

Table Dining ORs (Drawing No FD-165 for item Nos 39.00 to 41.00) Removing of old unserviceable top of table dining ORs and S&F new aluminum top as per drg or as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.

Taking out of unserviceable stiffner and S&F new stiffner of mild steel square tube as per existing shape and size of Table dining ORs.

Preparation of old painted steel sufaces of table dining ORs by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of olive green/black colur/shade of approved synthetic enamel paint including fixing of four Nos of PVC shoes to each leg.

Chair Verandah (Drawing No FD-256) Preparation of steel tubular frame surfaces with emery paper and applying two coats of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable 04 Nos PVC shoes to the each leg of approved quality.

Teapoy Varandah (Drawing No FD-255/383 for item Nos 43.00 to 44.00) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of white synthetic enamel paint including four Nos PVC shoes.

(b) Top 18mm thick prelaminated HDHMRboard BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.

Table 3'x2' with/without drawer steel (Drawing No 283, 1008, 223, 310, 1007 for item Nos 45.00 to 49.00) S&F following components of Table dinning 900x600 mm steel including dismantling unservicable one all as specified and as directed. (a) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

(b) Top 18mm thick prelaminated HDHMRboard BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.

(c ) Taking out of unserviceable drawer and S&F of new drawer of as per existing shape and size complete all as per Drg.

(c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green/smoke grey/ any shade of approved quality.

(d) PVC shoe as per drg

TABLE COMPUTER (TP for item Nos 50.00 to 58.00) Top 18 mm thick pelaminated HDHMR board BSD (Make- Century/Green Ply/Achidly/Action Tesa) colour/shade as approved by EIC/GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed all around top with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Side with 18 mm thick prelaminated HDHMR board wih 0.8 mm thick PVC edging (Action Tesa/Centure Prowud from Century ply/ Green Panelmax fom Greenply) complete rest all as per drg.

(a) Complete key board made of 18mm thick prelaminated HDHMR board (Action Tesa/Century Prowud from Century ply/Green Panelmax from Greenply) with 2mm thick PVC edging with telescopic chaneel (Make-Ebco/Oxone/Hettich) Complete rest all s per drg & as directed by EIC. (b) Complete mouse board made of 18 mm thick prelaminated HDHMR board (Action Tesa/Century Prowud from Century ply/Green Panelmax from Greenply) with telescopic channel (make-Ebco/Ozone/Hettich) & PVC beading complete rest all as per drg & as directed by EIC.

Removing unserviceable/broken drawer sliders of Table Computer and S&F Volvo Telescopic ball bearing drawer slide mechanism that utilizes ball bearings for smooth and effortless drawer movement as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken drawer and S&F Drawer of 12mm commercial plywood BWR Grade of Table bed side as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken side back and S&F Side back of 12mm commercial plywood BWR Grade of Table computer as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken Bottom of drawer and S&F bottom of drawer of 12mm commercial plywood BWR Grade of Table computer as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken Hinges and S&F Hettich 15-24mm Sensays soft close Zero creank Hinges of Table computer be as per standard drgs and as directed by Engineer-In-Charge.

M&L for preparation of old painted steel surfaces of Table computer by scrapping with emery paper, cleaning, redusting, making the surface smooth and applying Black powder coated of approved quality complete all as specified and as directed by Engineer-in-Charge.

REPAIR OF SOFA SET (Drawing No FD-281 for item Nos 59.00 to 70.00) M&L for removing old unserviceable/ wornout cushion and tapestry cloth from sofa set 5 seater (Set consisting of 10 pieces of cushion) and supply of new cushion of size 580x 530x 100 mm thick make : sleep Well/Kurl-on/Duroflex with 40 density as approved by GE and cushion covered with tapestry cloth of approved shade & quality over a cover of lining cloth duly covered and streeched over the cushions complete in all as specified and as directed by Engr-in-Charge. (Cost of the tapestry cloth incorporated in the work shall be of not less than Rs. 400/- per meter)

All as per item No. 59.00 above but sofa set 4 seater (consisting of 8 pieces of cushion).

M&L for taking down decayed wooden long rail of sofa set three seater and S&F new long rail of same size made out of 2nd class HW (Shisham) and all as shown on drgcomplete all as specified and directed.

M&L for taking down decayed wooden short rail of sofa set three seater and Single seater and S&F new short rail of same size made out of 2nd class HW (Shisham) and all as shown on drgcomplete all as specified and directed.

M&L for taking out unserviceable legs of sofa set three seater and single seater and S&F new leg made out of 2nd class HW (Shisham) all as specified in drg and as directed by Engr-in -Charge.

M&L for taking down decayed wooden front/side rail of sofa set single seater and S&F new front/side rail of same size made out of 2nd class HW (Shisham) and all as shown on drgcomplete all as specified and directed.

M&L for taking out unserviceable side rail of sofa set three seater and S&F new side rail made out of 2nd class HW (Shisham) all as specified in drg and as directed by Engr-in -Charge.

M&L for taking out unserviceable Arms of sofa set three seater and single seater and S&F new arm made out of 2nd class HW (Shisham) all as specified in drg and as directed by Engr-in -Charge.

M&L for taking down decayed wooden front supporting long rail of sofa set single seater and S&F new long rail of same size made out of2nd class HW (Shisham) and all as shown on drgcomplete all as specified and directed.

M&L for taking down decayed wooden bottom / rear supporting rail of sofa set single seater and S&F new bottom/rear supporting rail of same size made out of 2nd class HW (Shisham) complete all as specified and directed.

M&L for taking down decayed wooden bottom / rear supporting rail of sofa set three seater and S&F new of same size made out of 2nd class HW (Shisham) and all as shown on drg complete all as specified and directed.

M&L for melamine polish with spary machine after removing of existing polish by scrapping for preparation of wooden surfaces of the following furniture by scraping with sand paper, redusting and apply putty whereever required and polishing the surfaces with french polish to get glossy finish all as specified in drg and directed by Engr-in-Charge for Sofa set 05 seater

REPAIR OF CHAIR WRITING CUSHIONED (MAP) (Drawing No FD/E6/MAP-12 for item Nos 71.00 to 74.00) M&L for melamine polish with spary machine after removing of existing polish by scrapping removing the existing old unserviceable worn out/torn out seat & back cushion complete with cloth and ply board from the chairs writing cushioned and replacing the same by cushion 40 mm density and duly covered with tapestry cloth superior quality not less than 400/- per meter and colour PVC beading alround as approved by Engr-in-Charge complete all as specified and directed.

M&L removing the existing old unserviceable worn out/perished out arms complete from the chairs writing cushioned and S&F new arm left right same as per existing arm complete all as specified and directed.

Welding to existing perished out portions of chair writing with Gas Welding to bring the item to original shape as per drg (Welding point upto 2 cm wide and 3 cm long will be counted as one point).

M&L for melamine polish with spary machine after removing of existing polish by scrapping for preparation of old painted steel surfaces of chair writing by scrapping with emery paper, cleaning, redusting, making the surface smooth and apply one coat of synthetic enamel paint of black shade of approved quality complete all as specified and directed.

REPAIR OF CHAIR DINING CUSHIONED(MAP) (Drawing No FD/E6/MAP/10 & 10(R)/FD/E6/MAP II/04 for item Nos 75.00 to 84.00) M&L for removing old unserviceable/ wornout cushion and tapestry cloth from Chair Dining and supply of new cushion of make : sleep Well/Kurl-on/Duroflex with 40 density and fixed on Plywood 12mm commercial BWR as approved by GE and covered with tapestry cloth of approved shade & quality over a cover of lining cloth duly covered and stitched over the cushions complete in all as specified in drg and as directed by Engr-in-Charge.FD/E6/MAP /10 & 10®/FD/E6/MAP II/04 (Note : Cost of the tapestry cloth incorporated in the work shall be of not less than Rs. 400/- per meter)

S&F new triangle bracket of teakwood 2"x2"x2" and fixing with Fevicol and brass Nails to Legs and Rails of chair dining cushioned complete all as specified and directed.

M&L for removing old unserviceable/ broken front leg of chair dining cushioned and S&F of new leg of teakwood complete all as specified in drg and as directed by Engr-in-Charge.

M&L for removing old unserviceable/ broken rear leg of chair dining cushioned and S&F of new leg of teakwood complete all as specified in drg and as directed by Engr-in-Charge.

M&L for removing old unserviceable/ broken front or back rail of chair dining cushioned and S&F of new rail of teakwood complete all as specified in drg and as directed by Engr-in-Charge.

M&L for removing old unserviceable/ broken side rail of chair dining cushioned and S&F of new rail of teakwood complete all as specified in drg and as directed by Engr-in-Charge.

M&L for removing old unserviceable/ broken Stiffner complete of chair dining cushioned and S&F of new Stiffner of teakwood complete all as specified in drg and as directed by Engr-in-Charge.

M&L for removing old unserviceable/ broken back support rail of chair dining cushioned and S&F of new back support rail of teakwood complete all as specified in drg and as directed by Engr-in-Charge.

M&L for removing unserviceable hard Rubber shoes from bottom of legs of chair dining cushioned S&F hard Rubber ring/shoes duly screwed as specified in drg.

M&L for melamine polish with spary machine after removing of existing polish by scrapping with sand paper, redusting and apply putty whereever required and polishing the surfaces with french polish to get glossy finish all as specified in drg and directed by Engr-in-Charge for Chair Dinning Cushioned.

REPAIR OF TRADE PATTERN/GODREJ HAIR/COMPUTER/REVOLVING CHAIR (TP for item Nos 85.00 to 96.00) M&L removing the existing old unserviceable worn out/torn out seat & back cushion complete with faded/wornout cloth from the chairs and replacing the same with new tapestry cloth, colour PVC beading alround and cushion foam 40 mm density, and size as per brand and as approved by Engr-In-Charge .

All as per item No 85 above but for Base Plate

All as per item No 85 above but Height adjustment mechanism

All as per item No 85 above but Connector of seat & back

All as per item No 85 above but Castor roller (wheel)

All as per item No 85 above but Hydraulic compressor

M&L replacing existing loose screws of arm rest, seat & back, base plate. and greasing of compresor parts up/down lever, tightening of PVC beading and welding wherever required and as directed by Engr-In-Charge.

M&L removing the existing old unserviceable worn out/torn out parts from the Chairs Revolving . S&F the new standard parts, necessary welding work wherever required includung making good for ARM Rest Left and right

CHAIR VISITOR /CHAIR STEEL WITH CUSHION Taking down and removing of old unserviceable materials i.e foam and cloth velvet etc from seat and back from Chair Visitor/Chair steel with cushion and supply and fixed 12mm th hot pressed ply wood upholstered with fabric and moulded polyurethane form seat and back of Chair Visitor/Chair with cushion with change of new tapestry, of best Quality as approvled by GE with foam cushion shape/size/pattern as per old existing seat and back complete all as specified and directed by Engineer-in-Charge FD No-TP

M&L replacing existing loose screws of arm rest, seat & back, base plate. and greasing of compresor parts up/down lever, tightening of PVC beading and welding wherever required and as directed by Engr-In-Charge.

M&L removing the existing old unserviceable worn out/torn out parts from the Chairs .S&F the new standard parts, necessary welding work wherever required includung making good for ARM Rest Left and right

M&L of two coat of Enamel paint to be match as per old/existing colour will be provided after making smooth surfaces of the steel frame complete all of chairs as specified and directed by Engineer-in-Charge FD No-TP

REPAIR TO BED HARD STEEL (MAP) (Drawing No FD/E6/MAP/08(R) for item Nos 97.00 to 101.00) M&L for preparation of old steel surfaces by of Bed Hard steel scraping with emery paper, cleaning, redusting, making the surfaces smooth finishing and one coat of synthetic enamel paint of approved shade of approved make & quility on all steel surfaces inside and out side of Bed Hard steel all as specified and as directed by Engr-in-Charge.

M&L removing of unserviceable ply top and supply & fixing 1980mm X 900mm X 12mm thick BWR plywood conforming to IS 303 of 1975 fixing with nuts & bolts complete all as specified and as directed by Engr-in-charge.

M&L removing of unserviceable head board frame of steel & fixing new full frame head board with legs made of steel as per drg andn and fixing new head board with made of 18/19 mm thick pre-laminated partical board with PVC edge beading and fixing with suitable size of screws complete all as specified and as directed by Engr-in-charge.

M&L removing of unserviceable foot board frame of steel & fixing new full frame foot board with legs of steel as per drg & fixing new foot board with made of 18/19 mm thick pre-laminated partical board with PVC edge beading and fixing with suitable size of screws complete all as specified and as directed by Engr-in-charge.

M&L for removing unserviceable/broken toe rubber shoes from Bed Hard steel and S&F new rubber shoes of approved make and quality , all as specified in drg and as directed by Engr-in-Charge.

CHAIR VERANDAH(MAP) (Drawing No FD/MAP-II/15 for item Nos 102.00 to 104.00) M&L for removing broken/ unserviceable PVC seat and back with 4 mm thick ribs on back side from Chair Verandah and fix new PVC seat and back with 4 mm thick ribs on back side duly approved by GE all as specified and as directed by Engr-in-charge.

S&F for hard rubber shoes to bottom of legs in Chair Verandah shape all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces by scrapping with emery paper, cleaning, redusting, making the surface smooth and applying one coat of synthetic enamel paint of white shade/Olive Green/black of approved quality complete all as specified and directed by Engr-In-Charge for Chair Verandah.

TEAPOY VERANDAH (MAP) (Drawing No FD/E6/MAP/17 for item Nos 105.00 to 108.00) Welding to existing perished out portions of Teapoy Verandah with Gas Welding to bring the item to original shape as per drg ( Welding point upto 2 cm wide and 3 cm long will be counted as one point) complete all as specified and as directed by Enginner-in-Charge.

M&L for preparation of old painted steel surfaces of Teapoy Verandah by scrapping with emery paper, cleaning, redusting, making the surface smooth and applying one coat of synthetic enamel paint of black of approved quality complete all as specified and as directed by Engineer-in-Charge.

Removing unserviceable/broken portion of teapoy Verandah top and S&F teapoy Verandah top of pre laminated particle board (ISI marked)of 18mm thick and provide 4mm thick teakwood beading alround the top including polishing to teak wood beading as per standard drgs and as directed by Engineer-In-Charge.

S&F for hard rubber shoes to bottom of legs in Teapoy Verandah complete all as shown on drawings and as directed.

TABLE BED SIDE (MAP) (Drawing No FD/E6/MAP/15(R) for item Nos 109.00 to 118.00) Welding to existing perished out portions of Table bed side with Gas Welding to bring the item to original shape as per drg ( Welding point upto 2 cm wide and 3 cm long will be counted as one point) complete all as specified and as directed by Enginner-in-Charge.

Removing unserviceable/broken drawer sliders of Table bed side and S&F Volvo Telescopic ball bearing drawer slide mechanism that utilizes ball bearings for smooth and effortless drawer movement as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken MS conduit pipe and S&F 18 MS Square pipe (18 Gauge) fiexing with black powdwe coated in Table bed side as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken top and S&F Top of pre laminated particle board (ISI marked)of 18mm thick and provide 4mm thick teakwood beading alround the top including polishing to teak wood beading Table bed side as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken drawer and S&F Drawer of 12mm commercial plywood BWR Grade of Table bed side as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken side back and S&F Side back of 12mm commercial plywood BWR Grade of Table bed side as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken Bottom of drawer and S&F bottom of drawer of 12mm commercial plywood BWR Grade of table bed side as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken Handle and S&F Zinc Handle best qulity of table bed side be as per standard drgs and as directed by Engineer-In-Charge.

Removing unserviceable/broken Hinges and S&F Hettich 15-24mm Sensays soft close Zero creank Hinges of table bed side be as per standard drgs and as directed by Engineer-In-Charge.

M&L for preparation of old painted steel surfaces of Table bed side by scrapping with emery paper, cleaning, redusting, making the surface smooth and applying Black powder coated of approved quality complete all as specified and as directed by Engineer-in-Charge.

ANAND FURNITURE (BID ID -3376480)

GUJRAL BUILDERS (BID ID -3377184)

Avinash Enterprises (BID ID -3369932)

m/s tripurari enterprises (BID ID -3379272)