CA NO GE/ND-47/2022-23 REPAIR / MAINT OF INTERNAL E/M FITTINGS AND FIXTURES AND INT WIRING INCL SUBMAIN WIRING AND ALLIED WORKS AT HQ IDS, SOUTH HUTMENT AND DCYA UNDER GE NEW DELHI

Amount

Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point ) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes all as specified.

Material and labour for point wiring with PVC insulated unsheathed multi stranded, single core, FRLS, copper conductor cable of size 1.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS , copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly drawing through PVC concealed conduit but including provn of new galvanised modular concealed box with suitable back & front plate for housing the modular switches, sockets & fan regulators

One light/fan/bell point controlled by one No, one way switch.

One 6 Amp socket outlet point controlled by one No, one way switch on same board

One 6 Amp socket outlet point controlled by one No, one way switch on independent board

One 16 Amp socket outlet point controlled by one No, one way switch on independent board with cable of size 2.5 sqmm 1100 Volts including one run of size 1.5 sqmm as earth continuity conductor all as directed

One 32 Amp socket outlet point controlled by one No, one way switch on independent board with cable of size 4 sqmm 1100 Volts including one run of size 2.5 sqmm as earth continuity conductor all as directed Notes :- (i) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (ii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

S&F modular switch 1 way 6 Amp, SP, one module 230 volts AC all as specified.

S&F modular switch 1 way 16 Amp, SP, one module 230 volts AC all as specified.

S&F modular socket out let 2/3 pin combined 6 Amp, 230 volts two module AC all as specified.

S&F modular socket out let 2/3 pin combined 6/16 Amp, 230 volts two module AC all as specified

S&F modular type electronic fan step regulator 120W, modular type 2 module all as specified.

S&F modular bell push switch 6 Amps, one module 230 Volts AC all as specified.

S&F modular AC BOX suitable for load current upto 32 Amp 230 Volts AC all as specified.

S&F in replacement LED tube light fitting 1x 20 watts, 220 volts AC, 1200mm, with Aluminium housing & integrated electronic driver complete with driver with polycarbonate diffuser & THD 10 % including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified

S&F in replacement sleek LED mirror light with high output diffuser 2 feet, 10 watts, 220 volts AC decorative type complete with driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified.

S&F in replacement LED luminaire 595 x 595 x2 mm, (2'x2') 36 watts, 220 volts AC recessed type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/Gypsum/roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified

S & F LED light (2'X2 inverter type') masterlite BB comes with provision for battery back up with accessories shift to emergency lighting in case of power failure LED luminaries made in CECA sheet metal with light window, opal diffuser for spotless glare -free uniform lighting.

S&F in replacement LED luminaire 1180x280x70 mm (4'x1'), 30 watts, cool white 220 volts AC recessed type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/Gypsum/roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified.

S&F in replacement warm/cool white LED luminaire recess/surface mounted downlighter with pressure die cast aluminium heat sink & PC diffuser round shape 24 watts, 220 volts AC finished in white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified.

S&F in replacement LED luminaire recess mounted downlighter with pressure die cast aluminium heat sink & PC diffuser round shape 15 watts warm white/cool white, 220 volts AC finished in white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified

S&F in replacement LED luminaire recess mounted downlighter with pressure die cast aluminium heat sink & PC diffuser round shape 6 watts warm white/cool white, 220 volts AC finished in white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified

S&F in replacement post top lantern ENDURA SPRING 40 W energy saving, environmental friendly , long life aesthetically designed with good indirect symmetrical light distribution , die cast aluminium landscape IP65 luminaire with IP 65 rating with high power COB LED as light source along with its mounting accessories .

S&F in replacement Cone NXG sturdy LED bollard 8 W conical type with uniformly lit diffuser at the upper portion for landscape lighting complete with mounting on PCC cube (15x15x15 cm) along with nut bolts and its grouting complete all as specified and as directed by Engr-in-Charge.

S&F in replacement spot light fittings LED type recessed mounted aluminium body round shape ivory powder coating finished 86mm dia of capacity 7 watt all as specified.

S&F in replacement Engagement light LED type with Red and Green compartment 230 volts with LED lamp 9 watt complete all as directed.

S&F in replacement warm white LED light fitting suitable for mounting on photo frame consisting of 02 Nos LED candle lamp 3 watt warm white 230 volts complete all as directed

S&F in replacement warm white LED light fitting suitable for mounting on photo frame consisting of 9 watt LED strip warm white 230 volts complete all as directed

Taking down of submain wiring including taking out conduit pipe of any description and of any size complete all as specified

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 10 sqmm complete drawn along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type in pvc conduit for continuous earth wire and connected to common earth dolly complete all as specified. Note :- Two run of 10 sqmm copper conductor cable,one run of 6.0 sqmm copper cable and one run of PVC conduit shall be measured as one unit length

All as per item No 24.00 here-in-before but size of cable 2 x6 sqmm complete along with cable 1x 4 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified Note :- Two run of 6.0 sqmm copper conductor cable,one run of 4.0 sqmm copper cable and one run of PVC conduit shall be measured as one unit length

All as per item No 24.00 here-in-before but size of cable 2 x 4 sqmm complete along with cable 1x2.5 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified. Note :- Two run of 4 sqmm copper conductor cable,one run of 2.5 sqmm copper cable and one run of PVC conduit shall be measured as one unit length

All as per item No 24.00 here-in-before but size of cable 2 x 2.5 sqmm complete along with cable 1x 1.5 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified Note :- Two run of 2.5 sqmm copper conductor cable,one run of 1.5 sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

M&L for checking electrical points for continuous electric supply system and rectification of defects including ceiling/ exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening, tapping of loose wires, any type renewal of small pieces of electric wire upto 1.00 mtr length and petty work complete on all working days including holidays all as directed by Engr-in-Charge for Kashmir House (E-in-C branch ) Area. Note - Contractors are advised to visit the sites before quoting their rates. Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. Contractor shall provide and deploy tradesman to carry out day to day complaints and tradesman will remain present in Kashmir House E-in C branch ) area from 0830Hrs to 1800 Hrs in working day . In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on Sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account.Contractor shall be penalised @ Rs. 1000/- per complaint per day, if he fails to attend the complaint within 3 hours.

Supply only against in repairs of switch piano flush type 6 Amp, SP, one way 230 volts AC all as specified

Supply only in repairs of switch piano flush type 16 Amp, SP, one way 230 volts AC all as specified.

Supply only in repairs of piano flush type socket out let 5 pin 6 Amp, 230 volts AC all as specified.

Supply only in repairs of piano flush type socket out let 6 pin 16 Amp, 230 volts AC all as specified.

Supply only in repairs of piano type electronic fan regulator suitable for 1200/1400 mm ceiling fan all as specified

Supply only in repairs of bell push switch piano flush type 6 Amps, SP, 230 Volts AC all as specified.

Supply only in replacement of call bell ding dong type suitable for 230 volts AC all as specified.

Supply only in repairs of cordless bell electronic type 230 volts AC all as specified.

Supply only in repairs of Plug Top 15 Amps, 230volts AC, 3-pin all as specified.

Supply only in repairs of Plug Top 5 Amps, 230volts AC, 3-pin all as specified.

Supply only in repairs flexible copper conductor twisted twin core PVC insulated cable of size 23/0.0076.

Supply only in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 4 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified.

Supply only in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified.

Supply only in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified.

Supply only in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 12 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified.

Supply only in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified.

Supply only in replacement of MCCB TP 125 Amp, 25kA thermal type complete all as specified.

Supply only in replacement of MCCB TP 160 Amp, 25kA thermal type complete all as specified.

Supply only in replacement of MCB SP 5-32 Amp, 10kA all as specified.

Supply only in replacement of MCB SP 40-63 Amp, 10kA all as specified.

Supply only in replacement of MCB SPN 20-32 Amp, 10kA all as specified.

Supply only in replacement of MCB SPN 40-63 Amp, 10kA all as specified.

Supply only in replacement of MCB TP 25-63 Amp, 10kA all as specified.

Supply only in replacement of MCB TPN 40-100 Amp, 10kA all as specified.

Supply only in replacement of metal clad AC box complete with MCB 20 Amp, 230 volts AC all as specified.

Supply only in replacement LED tube light fitting 1x 10 watts, 220 volts AC decorative box type complete with driver, bipin holders & including 10 watts retro fit type LED tube light including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply only in repairs LED lamp candle type 3 watt 230 volts all as specified and as directed by Engr-in-Charge.

Supply only in repairs of decorative laminated sheet 3 mm thick of size 8"x 12" including necessary cutting of sheet for fixing switch/ socket complete as specified and directed

Supply only in repairs of decorative laminated sheet 3 mm thick of size 8"x 5" including necessary cutting of sheet for fixing switch/ socket complete as specified and directed

Supply only in repairs of decorative laminated sheet 3 mm thick of size 7"x 4" including necessary cutting of sheet for fixing switch/ socket complete as specified and directed

Supply only in repairs of decorative laminated sheet 3 mm thick of size 4"x 4" including necessary cutting of sheet for fixing switch/ socket complete as specified and directed

Taking down ceiling fan/ exhaust fan of any sweep and any make, dismantling of blades, transportation to work shop for carrying out rewinding work, transportation back to site, reinstallation/refixing/hanging in position after complete repairs as required and making functional including testing complete all as specified and directed. Note:- Rewinding shall be measured and paid for under respective item of this Schedule.

M&L for rewinding of ceiling fan 1200 mm sweep, by dismantling of fan motor, cutting and removing burnt windings, cleaning, winding with super enamelled copper wire of superior quality, thickness as per existing gauge and number of wire turns as per existing winding, provision of insulation paper, applying varnish, drying varnish and re-assembling of fan including replacement of gun metal bush & ball bearing where ever required complete all as specified and directed. Note:- cost of gun metal bush and bearing included in this item.

M&L for rewinding of ceiling fan 1400 mm sweep, by dismantling of fan motor, cutting and removing burnt windings, cleaning, winding with super enamelled copper wire of superior quality, thickness as per existing gauge and number of wire turns as per existing winding, provision of insulation paper, applying varnish, drying varnish and re-assembling of fan including replacement of gun metal bush & ball bearing where ever required complete all as specified and directed. Note:- cost of gun metal bush and bearing included in this item.

M&L for rewinding of exhaust fan/cabin/wall fan 230/300 mm sweep, by dismantling of fan motor, cutting and removing burnt windings, cleaning, winding with super enamelled copper wire of superior quality, thickness as per existing gauge and number of wire turns as per existing winding, provn of insulation paper, applying varnish, drying varnish and re-assembling of fan including replacement of gun metal bush & ball bearing where ever required complete as specified and directed. Note:- cost of gun metal bush and bearing included in this item.

Supply only in repairs of fan capacitor 2.5 Mfd all as specified.

Supply only in repairs of fan capacitor 3.15 Mfd all as specified.

Supply only in replacement steel ball bearing of suitable size & model (as per sample) for ceiling fan 1200/1400mm sweep.

Supply only in replacement gun metal bush for ceiling fan 1200/1400mm sweep.

Supply only in repairs of Steel screws for body cover and blades suitable for ceiling fan of any size and of any make

Supply only in repairs of Mild steel 'U' clamps with rubber reel, bolts, nuts, washers and safety pin

Supply only in repairs of Down rod 1.2 mtr height fabricated out of MS pipe 12mm dia heavy duty duly painted with two coats of white synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete as specified and directed.

Supply only in repairs of Down rod 60 cm height fabricated out of MS pipe 12mm dia heavy duty duly painted with two coats of white synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete as specified and directed.

M&L for taking down ceiling fan & taking out old unsv blades & replacement with new one by fixing nut bolts complete all as specified and as directed by Engr-in-Charge

M&L for taking down ceiling fan by replacing old unserviceable nut bolts, washers (GI) with new one and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. at its position. Complete all as specified and as directed by Engr-in-Charge.

Supply only in replacement of PVC gang box 5/6 amp single way heavy duty as approved by Engr-in-Charge

Supply only in replacement of PVC gang box 5/6 amp 3/4 way heavy duty as approved by Engr-in-Charge

Supply only in replacement of PVC gang box 15 amp 4 ways heavy duty as approved by Engr-in-Charge

Supply only in replacement of PVC 3 Modular gang box with Cover plate of suitable module as approved by Engr-in-Charge.

Supply only in replacement of PVC 4 Modular gang box with Cover plate of suitable module as approved by Engr-in-Charge.

Supply only in replacement of PVC 6 Modular gang box with Cover plate of suitable module as approved by Engr-in-Charge.

Supply only in replacement FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 1.5 sqmm LT 1100 volt grade complete.

Supply only in replacement FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 2.5 sqmm LT 1100 volt grade complete.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 4.0 sqmm LT 1100 volt grade complete.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 6.0 sqmm LT 1100 volt grade complete.

Supply only FRLS PVC insulated unsheathed multi core stranded copper conductor Cable of size 2.5 sqmm, 3Core LT 1100 volt grade complete.

Supply and fixing in replacement of motor for ventilating fans AC single phase 230/240 V of size 230 mm sweep metal body complete

Supply and fixing in replacement of motor for ventilating fans AC single phase 230/240 V of size 300 mm sweep metal body complete

Supply and fixing in replacement heavy duty motor for exhaust fans AC single phase 230/240 V of size 300/380 mm sweep 900 rpm metal body complete

Supply & fixing in replacement of motor for wall mounted fan 380 mm sweep AC single phase 230/240 V complete

M&L for laying of XLPE PVC sheathed armoured cable 16 sqmm 4 core complete all as specified and as directed by Engr-in-Charge.

M & L Earthling complete with galvanised steel earth plate electrode, 600x600x6mm thick, buried directly in ground vertically to depth not less than 1.5 meters below normal ground level, connected to galvanised iron earthing strip 25x4mm by means of bolts, nuts, check nuts including necessary excavation and earth work (in any type of strata ) and washers of galvanised iron or steel, CGI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type c1, 80mm thick pre-cast RCC 1:2:4, type B-1 cover reinforced earth plate surrounded by alternate layers of packed charcoal, salt packed which shall not be less than 15cm in all side of earth plate complete all as shown in electrical plate No 3 of MES schedule Part-I.specified and directed by Engr-in-charge .

Supply only in replacement 5 W LED coloured Adore Lamp B22 Green suitable for bulb holder in engage lights. Complete all as specified and as directed by Engr-in-Charge.

Supply only in replacement 5 W LED coloured Adore Lamp B22 Red suitable for bulb holder in engagement lights. Complete all as specified and as directed by Engr-in-Charge.

M&L in replacement for fixing of LED Picture lights 12W for photo frame in warm white colour in Aluminium body gold finish along with all accessories necessary to mount the lights.

M&L in replacement LED inverter based 18 watt light batten fitting complete with accessories made of aluminium housing having minimum system efficiency 100 lm/watt operating at full load at AC supply & minimum 10 watt during battery back up , power factor is equal to or greater 95, CCT 6500K, CRI -80, IP-20, inbuilt Li-ion battery for backup, back up to 4 Hrs for complete tube light (partial back up not allowed), LM-79 & 80 complete all as specified and directed.

M&L in replacement LED inverter based 45 watt building security(street light) fitting complete with accessories made of aluminium housing having minimum system efficiency 100 lm/watt operating at full load at AC supply & minimum 20 watt during battery back up , power factor is equal to or greater 95, CCT 6500K, CRI -80, IP-20, inbuilt Li-ion battery for backup, back up to 4 Hrs for complete tube light (partial back up not allowed), LM-79 & 80 complete all as specified and directed.

supply and fix Heavy duty exhaust fan 18 inch metallic body copper wounded motor ,consisting louver shutter complete all as specified and directed

supply only in replacement fastener MS 8 mm suitable for fixing heavy-duty exhaust fan /geyser/wall fan etc complete all as specified and directed

supply only in replacement pvc mcb box pvc for mcb DP

supply only in replacement pvc conduit 20/25 mm size

supply only in replacement pvc casing caping of any size

supply only in replacement pvc flexible pipe 20/25 mm size

supply only in replacement 3 module plate and MS sunken box suitable for modular switch socket any type

supply only in replacement 4 module plate and MS sunken box suitable for modular switch socket any type

supply only in replacement 8 module plate and sunken box suitable for modular switch socket

supply only in replacement 12 module plate and sunken box suitable for modular switch socket

supply only in replacement Teflon tape in red ,yellow ,black,green colour suitable to wrap over wire joints (each set contains 4 roll of tape )

M&L for Chemical Earthing complete with Copper earth plate 90 x 60CM x 5 mm thick buried directly in ground (earth pit not less that 2.5mtr deep below ground level ) with top edge of the plate not less than 1.25mr below normal ground level connected to 50x6 mm copper strip as earthing lead by means of brazing after tighten by bolts, nuts, check nuts and washers from earth pit to test point with protection GI pipe of size 40mm dia light grade and providing masonry enclosure and watering pipe of dia 25 mm including wire mesh steel funnel, including watering arrangement 200 ltrs for each earth pit complete as specified and directed by Engr-in-charge. Make of GI Pipe is Prakash/Jindal Note: Copper strip 7.5 mtr included in the quoted rate from earth pit to test point

Grid Infratech Pvt Ltd

S.R. Constructions

SANJEEV ENTERPRISES

Surjit and Sons