PETTY REPAIR TO ROOF SHEETING,WATER PROOFING, FlOORING,,JOINERY, PLASTER TO MD ACCN AND OTM UNDER GE NAGROTA

Amount

BUILDING WORK NOTE:-THE ENTIRE WORK HAS TO CARRIED OUT AS ON REQUIRED BASIS. ACCORDINGLY SITE WILL BE AVAILABLE IN PIECE MEAL WISE AND QUALITY OF WORK SHALL BE MONITERED PERSONALLY BY GE. THE WORK LIES IN VIP AREA.THE CONTRACTOR SHALL CLEAN GLASS PANE,FLOOR AREA AFTER PERIODICAL WORK. 2.SAFETY BELTS AND HELMET SHALL BE PROVIDED TO LABOURS WORKING IN HIGH RISE BUILING. 3.SAFETY BELTS SHALL BE ANCHORED TO AVOID ANY ACCIDENT. CONTRACTOR SHALL QUOTE THEIR RATES ACCORDINGLY

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)

Preparation of newly plastered surfces of walls and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick

M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .

Preparation of old plastered surfces of wall and applying two coats of cement base paint over a coat of wall care putty 3mm thick

Preparation of newly plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as spd and as directed

Preparation of old plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as spd and as directed

S&F Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4 including complete all as spd and directed.

Glazed ceramic tiles coloured (Premier quality) in vertical surface of size 300mm x200 mm x 7mm thick jointing in neat cement slurry and pointing in colour cement to match including incl 10mm thick screed bed/bedding layers in cm 1:4

M & L for 25 mm thick PCC 1:2:4 type B-1 (20 mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and rough

Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed

Taking down chowkats or frames exceeding n.exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each all as specified and directed

Taking down shutters of any description not exc 1.00 Sqm each all as specified and directed

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed

S & F 35mm thick plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered board with commercial veneering on both faces. The size of rail and stile as per IS -1003 (Part-I) klin seasoned and chemically pressure treated complete all as spd and directed (2nd class hard wood rail and stile) all as spd & directed.

S & F 35mm thick glazed & skeleton shutters of 2nd class hard wood, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as spd in SSR Part-I section 8 clause 8.2 (A) complete all as spd

Preparing of New or previously painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed by Engineer-in-charge.

Preparing of Old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately

Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS all as specified. Note:- Wire mesh and sheet glass shall be measured and paid separately

M & L for, Preparing of new untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane all as spd and directed

4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes all as spd

S & F Aluminium anodised handle extruded section and fixed of size 150mm all as specified and directed

S & F in repairs Aluminium anodised handle extruded section and fixed of size 150mm all as specified and directed

S & F in Aluminium sliding door bolts clamps type (ISI Marked), 300mm long, with bright bolt not less than 12mm dia with and incl a minium of 6 bolts and nuts, four on bolt plates and two on staple plate all as specified and directed

S & F in Aluminium sliding door bolts clamps type (ISI Marked), 250mm long, with bright bolt not less than 12mm dia with and incl a minium of 6 bolts and nuts, four on bolt plates and two on staple plate all as specified and directed

S & F in repairs Aluminium sliding door bolts clamps type (ISI Marked), 250mm long, with bright bolt not less than 12mm dia with and incl a minium of 6 bolts and nuts, four on bolt plates and two on staple plate all as specified and directed

Aluminium anodised barrel tower bolts extruded section and fixed in repairs of size 150 mm all as specified and directed

Aluminium anodised barrel tower bolts extruded section and fixed in repairs of size 100 mm all as specified and directed

S & F for 75 mm long Butt hinges, (ISI marked) medium weight cold rolled mild steel fixed with screws or welding fixed in repair including taking down shutter and refixing in same position

S & F fo All as per item No 37 here in before but 100 mm long

S & F for Mild steel Helical door springs including roller plate complete of 150mm long

S & F Factory made 18 mm thick celuka PVC ply of density 600kg/cbm for KICTHEN CABINETS and drawers including all Hettic fittings like Hydraulic channels, slowmotion hinges,Hydraulic shockers and 300 mm stainless steel handles as per site reqirements and manufacturer test certificate is required at the time of PAYMENT. MAKE:- RAJSHRI PLASTIWOOD,ECOCEL BY ECHON. NOTE:-1. WORK SHALL BE EXECUTED BY COMPANY REPRESENTIVES ONLY WITH GUARANTEE CERTIFICATE. 2.PVC ADHESIVE SHALL BE USED FOR PASTING THE PLY APPROVED BY MANUFACTURER 3. ONLY FRONT ELEVATION SHALL BE CONSIDERED FOR MEASUREMENT PURPOSE

Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing given in SSR -2010 (Part-II) colour shade as approved by GE complete all as specified and directed.

Glazed ceramic coloured printed tiles (first quality) of size 300 x 600 x 7 mm thick (exc 0.11 but n exc as in 0.18Sqm)vertical surface dado/skirting, set and jointed in neat cement slurry and pointing in coloured cement to match the shade of tile over 10mm thick cement scredd bed in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd and directed

Demolition of Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M/L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement..

M&L chequered cement tiles concrete 20cm x20cm x 25mm thic, set jointed in neat cement slurry in floor including 15mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc all as specified. .

20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s. Make : PRAYAG (Standard range) or equivalent as approved

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).Make- Jinal Section,

4mm thick Non asbestos fibre cement building board fixed or laid/inserted to frame work complete all as specified and directed.

Wooden beading of teak wood, bull nosed ,chamfered or rounded fixed with screw to pre laminated board area exc 3 Sqcm and n.exc 6 Sqcm in section complete all as specified

Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m.

M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Mesured and Paid Separately.

Supplied only for Integral water proofing compound.

M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces

M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm.

M&L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.

Applying one coat of aluminium paint on top of APP membrane.

S&F 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs.

S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore

PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in padding finished even and smooth without using extra cement all as specified and directed.

Supply and fix aluminium anodised snap grid ceiling of frame size 600 x 600mm, main Tee section of size 36.5 mm x 25 mm x 1.4 mm thick, cross Tee section of size 23.5 mm x 26.4 mm x 1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders complete all as specified and directed.

Supply and fix 6 mm thick non asbestos cement building boards ( Decorative E-Board), fixed to aluminium framework with screws in as ceiling complete all as specified and directed.

Taking down existing cement plaster of any description over damaged surfaces irregular facia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even ( avg 50mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate shall be provided wherever required) followed by 05mm thick rendering in CM (1:3) finished complete all as specified and directed including two coats of cement base paint over a coat of primer over new plaster surface including preparation etc complete.(after curing of specified time and drying the surfaces as required). NOTE:-1.REPAIR WORK OF CHAJJAS SHALL BE PERSONALLY MONITERED BY GE. 2.REPAIR WORK SHALL BE DONE AT ANY HEIGHT WITHOUT ANY EXTRA PAYMENT.

Dismantling Plain or Corrugated steel sheeting, any guge, thickness in roof covering and removing from site of work complete all as specified

S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based corrugated steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed of class VIII.

S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based Plain steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed of class VIII.

Removing old tarfelt or polythene film including taking down plaster of sunken floor , roughening and cleaning by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment as follow :-(i) Applying bitumen primer @ 0.40Kg/Sqm (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat.

100mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4)

75mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4)

M & L for Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed

Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed by Engineer-in-charge.

M & L, preparation of new or previously untreated surfaces with one coat of Red oxide and two coats of synthetic enamel of ordinary tint on surfaces of any description over 10 cm in width or grith, not otherwise described.

U K Engineering Works

Nitika electricals and engineers works

NARESH KUMAR AND COMPANY

AKSHAY CONSTRUCTION COMPANY

BMMJ TRADERS AND ENGINEERS

M/S KARAN SINGH CONTRACTOR

M/s Khajuria Construction Co.

Bidder Name

BHARTI CONSTRUCTIONS

BMMJ TRADERS AND ENGINEERS

Nitika electricals and engineers works

AKSHAY CONSTRUCTION COMPANY

U K Engineering Works

M/s Khajuria Construction Co.

NARESH KUMAR AND COMPANY

M/S KARAN SINGH CONTRACTOR