Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
22 Jan 2026, 4:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
ELECT.G
17 conditions · 5 needing a document upload
Financial Eligibility Criteria: (Ref: RB letter No. 2022/CE-I/CT/GCC- 2022/POLICY : Advance Correction Slip No.-1 dt 14.07.2022) The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-I, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The intending tenderers should possess a valid electrical contractor license at the time of opening of tender, issued by any state government & same should be submitted along with tender documents by all bidders including working contractors of this unit otherwise offer shall be summarily rejected....... IT SHOULD BE NOTED BY THE TENDERER THAT ELECTRICAL LICENSE UNDER RENEWAL AT THE TIME OF TENDER OPENING WILL NOT BE CONSIDERED AND OFFER WILL BE SUMMARILY REJECTED. IT IS THE RESPONSIBILITY OF TENDERER TO UPLOAD VALID ELECTRICAL CONTRACTOR LICENSE ON THE DATE OF TENDER OPENING.
All requisite documents mentioned in clause 3.7 of the tender document attached pertaining to constitution of firm/concern. (As applicable).
32 conditions · 4 needing a document upload
The rate to be quoted by tenderer shall be inclusive of all state/central taxes including GST. THE TENDERER SHOULD UPLOAD VALID GST REGISTRATION CERTIFICATE ALONG WITH THE OFFER.
The tender shall comply with General Condition of contract (GCC),2022 of Indian Railways (file attached). and its latest amendment, if any. The tenderer shall submit the offer after duly satisfying himself/herself with the GCC,2022 in general.
Tenderers are required to upload the Bank details as per Annexure-XII (Real Time Gross Saving (RTGS)/National Electronic Fund Transfer (NEFT) Model Mandate Form)of tender document.
Tenderers are required to upload requisite details as per Annexure-VIIB (DETAILS OF CONTRACTUAL PAYMENT RECEIVED IN LAST THREE FINANCIAL YEARS AND CURRENT FINANCIAL YEAR) without which the offer is liable to be rejected.
Tenderers are compulsorily required to upload Affidavit as per Annexure-XXIV along with tender document, without which the offer will be considered incomplete and will be rejected summarily.
All requisite documents/credentials mentioned in clause 3.5 of the tender document attached pertaining to his/their technical and financial eligibility. (As applicable).
All requisite documents mentioned in clause 3.7 of the tender document attached pertaining to constitution of firm/concern. (As applicable).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
PAYMENT TO THE CONTRACTOR SHALL BE MADE AS UNDER: 1.1 100% payment will be done after successful supply, installation, testing and commissioning of actual work done by the tenderer and on certification by the Railway representative. No part payment shall be made for supply of material. 1.2 2% Income Tax and 15% surcharge on Income Tax shall be deducted from the payment as statutory obligation and required certificates for this deduction shall be issued by Railway Accounts Department. 1.3 Any other statutory taxes, as applicable shall also be deducted from the contractor's bill.
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenderer/s shall be treated as Null & Void.
The rate to be quoted by tenderer shall be inclusive of all state/central taxes including GST. tenderer shall submit GST certificate along with the offer.
This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no. 2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017.
IF ANY DISCREPANCY IS FOUND IN THE TENDER DOCUMENT, NAMELY SOR ITEM DESCRIPTION, SPECIAL TENDER CONDITION ETC., CLARIFICATION CAN BE SOUGHT FROM THE OFFICE OF SRDEE/G/DLI, DRM OFFICE, STATE ENTRY ROAD, NEW DELHI.
This tender complies with Railway Board instructions for Startups (recognized by Department of Industrial Policy and Promotion, Ministry of Commerce and Industry) for exemption from payment of Bid Security as detailed in GCC 2022 as amended from time to time. Such Startup firms may note that no other exemption is applicable to them in this particular tender.
On account payment, contractor shall submitted indemnity bond with validity up to the completion/extended period in the prescribed format (please refer Annexure-XXVIII) at the contractor's cost, vesting the ownership of such material with the railways.
Repair, servicing, overhauling & strengthening of 11 KV HT installation at colonies over DLI division.
34-R1-SRDEE-G-DLI-2025-26~NR
34-R1-SRDEE-G-DLI-2025-26
Open
Works - General
12 Months
Delhi, Delhi
₹0
₹2.2 L
22 Jan 2026
31 Dec 2025
8 Jan 2026
66 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 94,85,848 | ||
| — | 500.00 | — | — | ||
| Supply Laying Testing and Commissioning of HDPE pipe of 160 mm dia having material grade PE-100, wall thickness PN-6 and confirming to IS-4984 or latest as per IE rules and site requirement for cable laying through HDPE pipe of 160mm diameter by trench less method as per IS -1255 or latest & IE rules and site requirement.& as per Explanatory Note . | — | — | — | 5,37,500 | |
| — | 300.00 | — | — | ||
| Laying of HT cable of size upto 120 sq. mm as per CPWD guidelines and maintaining minimum depth of 75 cm and depth not less than 35 cm conforming to CPWD General Specifications for Electrical Works Part-II External - 2023, CPWD DSR (E&M) 2022 Item no. 8.1.1. & as per Explanatory Note . | — | — | — | 1,57,500 | |
| — | 3.00 | — | — | ||
| Supply, Fixing, Testing and Commissioning HT Outdoor type , 11 KV SF6 type extensible and motorized , 5-way smart RING MAIN UNIT(RMU) complete with three VCB and two LBS and FPI but without FRTU as per Nigam's technical spec.no. CSC-117/R-III/DH/UH/P&D/2018-19- (with latest amendments) and Explanatory Note and tech spec 1. the RMU shall have the complete wiring and capability to connect/Integrate the FRTU in the future for enabling the SCADA functionality as per site requirement. | — | — | — | 40,07,280 | |
| — | 15.00 | — | — | ||
| Supplying and making outdoor cable end jointing with heat shrinkable joining kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminum conductor cable of 11 KV grade as required conforming to CPWD General Specifications for Electrical Works Part-II External - 2023, CPWD DSR (E&M) 2022 Item no. 10.5.1. 70 sq.mm & as per Explanatory Note. | — | — | — | 2,73,720 | |
| — | 6.00 | — | — | ||
| Supplying and making straight through cable joint kit with heat shrinkable joining kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminum conductor cable of 11 KV grade as required conforming to CPWD General Specifications for Electrical Works Part-II External - 2023, CPWD DSR (E&M) 2022 Item no. 10.6.1. 70 sq.mm & as per Explanatory Note . | — | — | — | 1,74,846 | |
| — | 500.00 | — | — | ||
| Suplying and fixing of FRP Fencing rust proof,shock proof, anti-corrosive,self extinguishing, ultraviolet stabilized, FVO-UL94, weather proof, flame retardant,environment friendly, installed at electrical installations with necessary concreting for grouting vertical post, hardware, accessories, fitting etc. of 2000 mm height above the ground and minimum 300 mm grouting in ground i.e. total height will be 2.3 meter along with 1 number of FRP almirah type double door gates with necessary hardware accessories like stainless steel heavy duty L-Drop, hinges, screws, nut and bolt, lock fittings etc. with double door openable-lockable provision for top ceiling arrangement with appropriate cut for high mast pole/CSS/FTU along with pad lock, hinges for the same of suitable length, width & height with vertical post of size 50x50x3mm, subframe of 50x25x3mm, pickets of size 38x15mm, hollow section size of not more than 5x5 inch and also providing 1 number danger plate of size 250x200x2mm, 1 number name plate of property of N.Railways and sponsors name as per site requirement & as per Explanatory Note . | — | — | — | 6,22,000 | |
| — | 6.00 | — | — | ||
| Earthing with 600x600x3mm thick copper plate earth electrode as per IS 3043(Latest version), to achieve earth resistance less than one ohm, including construction of masonry enclosure with hinged cover plate of cast iron with locking arrangement (Approx.size 600x600 mm) on top, watering pipe of length 2.7 Mtr, connections from earth plate to top with 40x6mm copper stip in 50 mm dia pipe class 'B' provision of earth plate as per drawing and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 and CPWD DSR (E&M) 2022 Item No. 5.6. & as per Explanatory Note . | — | — | — | 65,502 | |
| — | 30.00 | — | — | ||
| Supplying and laying 40 mm X 6 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt,spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) & as per Explanatory Note . | — | — | — | 56,250 | |
| — | 1.00 | — | — | ||
| Supply, Inspection & testing of Handheld Partial Discharge Measurement instrument for HT 11 KV switchgear panels with external TEV sensor, Temperature & humidity sensor, function tester, USB cord, charging cord, adapter, headphone, usb stick & case. (complete details as per Explanatory note), similar of Megger PD scan or equivalent, with 36 months warranty . | — | — | — | 9,91,200 | |
| — | 2.00 | — | — | ||
| Supply Inspection & testing of Digital multi functional tester for loop impedance measurement, prospective earth fault & short circuit current, RCD testing, voltage measurement, insulation & earth resistance measurement with accessories of make Megger MFT X1/ Fluke 1664 or similar, with 36 months warranty. Two days field training is mandatory by OEM representative person to railway staff for better application utilization of product.& as per Explanatory Note . | — | — | — | 5,01,500 | |
| — | 5.00 | — | — | ||
| Supply Inspection & testing of AC LEAKAGE clamp meter having current measurement range of 6mA to 100 A AC, jaw size 40mm, least resolution value of 0.001 mA at 6mA current range, Low pass filter, Analogue bar graph display with mandatory battery, carrying case & manual, similar of Megger DCM305E/ fluke or equivalent with 12 months warranty ,& as per Explanatory Note . | — | — | — | 3,46,330 | |
| — | 6.00 | — | — | ||
| Complete Repair & Overhauling of HT VCB panel in Dehi division area as per explanatory note. The work includes following scope of work: -A) Checking & rectification of complete wiring and its electrical / mechanical VCB functioning. B) Insulating painting of VCB (inner side) & its mounting accessories like CT, PT, spout & bus bar etc. C) Physical and operational testing of HT breaker by taking trolley out and submit report for trolley and allied parts health. D) IR testing of trolley & IR testing of all insulators. E) IR testing of vacuum interrupters. F) IR testing of CT and PT. G) Replacement of heaters and thermostat 1 set. I)Contact Resistance Measurement of Breaker. J) Checking of Time Interval and Stroke Length of VCB. K) Checking of VCB through AC Hi-Pot of 18KV. L) if required replacement of panel bus bar sleeve along with door & openable covers gasket for prevention of dust ingress.& as per Explanatory Note . | — | — | — | 1,59,000 | |
| — | 20.00 | — | — | ||
| Replacement,provision,connection & commissioning of Microprocessor technology based Numerical Protection Relay with digital display showing running current in all phases & earth, having IDMT as well as instantaneous protection for both three over current & earth elements with breaker failure protection, test trip option, Harmonic block protection, negative phase sequence protection, fault record option & communication port for a 3 phase 11KV breaker panel as per site requirement in make of C&S, GE, PROKDVS, Siemens,Schneider,ABB,Ashida, CG. It includes the work of disconnection, stripping of existing defective relay & rewiring of new relay, required as per site requirement to commissioning the new relay in HT panel at location of complete Delhi division. & as per Explanatory Note . | — | — | — | 2,59,320 | |
| — | 6.00 | — | — | ||
| — | — | — | 2,85,000 | ||
| — | 21.00 | — | — | ||
| — | — | — | 2,60,400 | ||
| — | 2.00 | — | — | ||
| — | — | — | 29,500 | ||
| — | 1.00 | — | — | ||
| — | — | — | 6,000 | ||
| — | 4.00 | — | — | ||
| — | — | — | 65,000 | ||
| — | 6.00 | — | — | ||
| — | — | — | 1,65,000 | ||
| — | 10.00 | — | — | ||
| — | — | — | 45,000 | ||
| — | 1.00 | — | — | ||
| Supply, inspection & testing of 3 phase breaker timer test kit similar of scope scot m3k+ or equivalent & as per Explanatory Note. | — | — | — | 2,00,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .