Line Shifting of 11 KV and LT Lines

Amount

Part A (Materials Provided by contractor)

ST Pole 9 mtr

ST Pole 11 mtr

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Polymer Disc Insulator T&C Type

11 KV Disc Fitting

1x400 mm² LT Cable

3x185 mm² xlpe Cable 11 KV

ACSR Dog conductor

ACSR Weasel conductor

3x150+1x95+1x16 mm² LT AB Cable

2x10 mm² LT cable (Armoured)

4x16 mm² LT cable (Armoured)

LT Shackle Insulator

3x185 mm² XLPE C/J kit outdoor 11 KV

3x185 mm² XLPE C/J kit St. through 11 KV

11 KV X-arm clamp

11 KV ‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Alluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Complete (Earthing Rod with per 2 Kg GI Wire)

11 KV E Bracket with Nut & Bolt

11 KV Top Channel

11KV Bracing angle (01 Set=2 No Bracing angle with 04 No clamp)

11 KV Top channel clamp with nut and bolt

PG Clamp as suitable for Dog/ Weasel conductor

11 KV Stay Set complete (01 set =01 No Stay Rod 16x1800 mm+01 No Stay clamp+05 Kg 7/10 SWG GI Wire)

Dead End Clamp for AB Cable

LT O/H clamp with nut & Bolt

Copper L Piece 62x225x12m(LS)

MS Channel Dropper (For fuse set) 100x50x2028 mm

Holding clamp for fuse set

Distribution box (D.B)

Clamps for D.B.

4 core LT MCB with Box

Al. Lug 240/400mm²/required size

I Hook

LT abc clamp with nut & Bolt

I clamp

Suspension clamp

11 KV Temporary cable hanging clamp (as per site required)

Neutral PRC

PART - B- WORK

Erection of Single pole structure on 9mtr ST. (SP-33) Pole for LT O/H Line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm Stone ballast), back filling of earth, proper ramming & fitting of all accessories LT clamp, danger board with clamp, number plate wih clamp, Aluminium paint, red oxide Paint, barbed wire, earthing, shackle insulator, etc. complete).

Erection of Single pole structure on 9mtr ST. (SP-33) Pole for LT AB Cable hanging including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm stone ballast), back filling of earth, proper ramming & fitting of all accessories LT ABC clamp, danger board with clamp, , Number plate with clamp, Aluminium paint, red oxide Paint, barbed wire, earthing, shackle insulator, etc. complete).

Erection of Single pole structure on 11mtr ST(SP-55) Pole for 11 KV S/C Line including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm stone ballast), back filling of earth, proper ramming, making plinth for poles 30 cm above & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Number plate with clamp, Pole painting, barbed wire earthing, etc. complete).

Erection of Single pole structure on 11mtr ST(SP-55) Pole for 11 KV D/C Line including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm stone ballast), back filling of earth, proper ramming, making plinth for poles 30 cm above & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Number plate with clamp, Pole painting, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for 11 KV D/C O/H Line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Number plate wiith clamp, Aluminium paint, red oxide paint, barbed wire earthing, Polymer Disc Insulator with fitting, Polymer Pin Insulator etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for 11 KV one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 9 mtr ST Pole for 11 KV only cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Laying of 11 KV 3x185 mm² cable(D/C) by HDD Method below ground (2M depth or as per site required) level.

Laying of 11 KV 3x185 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand.

Labour charges for inserting of MS Pipe, Rising of 11 KV cable and jumpering complete work.

Rising of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Cable kit jointing charges of 11 KV XLPE Cable Outdoor/Straight through

Labour charges complete for ABC Cable.

Dismantling, shifting and Relaying (Hanging) of Existing LT AB Cable on new erected Pole as much as possible.

Special Pipe Earthing Complete for Cable jointing Kit with materials. (provided and installation by contractor)

Disconnection and Reconnection of Existing LT cable connection in the path of Shifting of line as per follwoing details.

L.T. and Domestic Consumer connection cable.

Commercial and Power Consumer Connection cable.

Shifting, loading, carrage and installation of existing 630/400/250 KVA T/F 11/0.4 KV with related fitting (FRP fencing must be require)

Charges for Temporary trolly transformer during widening of sever with complete accessories provided by contractor.

Grouting of stay rods (16x1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog/weasel conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03/06 Nos. conductor in parallel. (11 KV S/C or D/C Line)

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog/weasel conductor in accordance including binding, Jumpering as per requirement in 04 Nos. conductor in parallel.

Laying, spreading, lifting and final sagging of 1 phase of ACSR weasel conductor in accordance, including binding, Jumpering as per requirement with LT AB Cable

Dismentling charges of existing Single Pole 8.5mtr. PCC Pole with fitting.

Dismentling charges of existing Single Pole 9 mtr. ST Pole with fitting.

Dismentling charges of existing Single Pole 11 mtr. ST Pole with fitting.

Dismentling charges of existing Double Pole 11 mtr. ST Pole with fitting.

Dismentaling of old ACSR Dog conductor and rolling in pieces.

Dismentaling of old ACSR weasel conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

Temporary line shifting work

Erection and grouting of ST Pole 11 mtr with X arm and other fitting.

Hanging of 3x185 mm² xlpe Cable on erected ST Pole with Existing line connecting and other complete work

Cable kit jointing charges of 11 KV XLPE Cable Outdoor/Straight through

Dismentaling of temporary line materials and ready to use for permanent line (Cable)

INDIA SUPPY CORPORATION (BID ID -4801130)

M/S SHUKLA ENTERPRISES (BID ID -4799317)

ARK ENGINEERING (BID ID -4800744)