Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC 21 KISHORE BHAWAN MALVIYA NAGAR AIR FORCE JODHPUR RAJ 342011 | JODHPUR | JODHPUR | RAJASTHAN | 342011 | L1 | Accepted-AOC ok | |
| 2 | L2₹14.5 L+₹1.1 L (8.12%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹16.8 L+₹3.4 L (25.4%)Rejected-Finance PRAGARI NAGAR BYE LANE 3 HOUSE NO 05 SATGAON UDAYAN VIHAR GUWAHATI 781171 | KAMRUP METRO | ASSAM | 781171 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹18.0 L+₹4.6 L (34.5%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹19.0 L+₹5.6 L (41.8%)Rejected-Finance HOUSE NO 15E ROAD NO 12 RAJENDRA NAGAR PATNA BIHAR 800016 | PATNA | PATNA | BIHAR | 800016 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF BIHTA
AIR FORCE STATION BIHTA - 801103
REPAIR/MAINTENANCE OF PERIMETER SECURITY LIGHTS, GENERAL AREA SECURITY LIGHTS AND ALLIED WORKS AT AFS BIHTA
2023_MES_598027_1
8317/BHT/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
BIHTA
CLASS E CATEGORY b(i)
6 documents required · 6 mandatory
₹500
GE (AF) Bihta
₹40,000
Yes
30 Jun 2023
24 May 2023
20 Jun 2023
24 May 2023
12 Jun 2023
7 Jun 2023
25 May 2023 - 31 May 2023
Amount
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts, column footings or for laying cables etc not exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.
Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.
Removing excavated materials (soil) not exc 50 m distance and depositing where directed at a level not exc 1.5 m above starting point, complete all as specified and directed.
Supply and laying well burnt old size sub class 'B' bricks as protection to underground cables, laid dry and flat perpendicular to the direction of cable adjoining each other, complete all as specified and directed.
M&L for dry and fine river sand free from sharp material as in cushioning to cable in trenches for cable protection including necessary punning and consolidation as required, complete all as specified and as directed. (Depth of sand shall be measured after punning).
Relaying of serviceable old size sub class 'B' bricks as protection to underground cables, laid dry and flat perpendicular to the direction of cable adjoining each other, complete all as specified and directed.
Disconnecting & taking out defective under ground cable from trenches, pole, pipe, floor, wall etc, locating the fault, rectifying the defect and relaying the XLPE cable under ground PVC insulated and overall sheathed aluminum conductor heavy duty 1100 volts connecting and testing for any size, complete as directed by Engineer-in-Charge. (Excavation,earth work, brick protection sand cushioning and GI pipe etc shall be measured & paid for separately).
Supply & laying, connecting and testing XLPE cable underground PVC insulated and overall sheathed with aluminium conductor heavy duty 1100 volts grade laid in trenches, floors, walls, poles, ducts, passing through pipe for road crossing etc complete all as directed by Engr-in-Charge including taking out old defective/unsv cable of following sizes :- (a) 16 Sqmm 4 core
(b) 25 Sqmm 3 ½ core
(c) 35 Sqmm 3 ½ core
(d) 50 Sqmm 3 ½ core
(e) 70 Sqmm 3 ½ core
(e) 95 Sqmm 3 ½ core
Supplying, laying connecting & testing PVC insulated sheathed, aluminium solid conductor cable of size 4 Sqmm twin core flat or circular, 1100 volts grade service connection from pole light to box with 15 mm flexible pipe connection on poles whereever reuired at site, complete all as specified and directed.
Supplying, laying connecting & testing PVC insulated sheathed, aluminium solid conductor cable of size 10 Sqmm twin core flat or circular, 1100 volts grade, complete all as specified and directed.
M & L for drilling of suitable dia horizontal bore holes suitable for insertion/laying of pipe upto 50 mm of any description under road surface/floor etc at site including making good disturbed surface to match with existing strata after laying pipe, complete all as specified and directed.
Supply & fixing in replacement of GI tubing, light grade, on poles, under floors, road crossing etc all as reqd at site including dismantling complete all as directed. (a) 50 mm bore
(b) 80 mm bore
Material & labour for cross arms, bracing supports, clamps and back plates fabricated from structural steel sections of any size and shape including nut, bolts, washers, welding, bending, cold or hot drilling holes in bolts of any size or 25/40 mm light grade 1.2 mtr GI pipe/bracket suitable for fixing the street light also including two coats of aluminium paint over one coat of primer, complete all as specified and as directed.
M & L for driver unit suitable for LED street/road way light of upto 60 watt including testing and taking down unsv street light and refixing the same after replacement of driver unit, complete all as specified and directed.
M & L for driver unit suitable for LED street/road way light of 60 -200 watt including testing and taking down unsv street light and refixing the same after replacement of driver unit, complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.
Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed.
S & F nature switch complete with timer, contactor, relays in suitable enclosure of single phase integrated models of capacity 8 KW including taking down old unsv nature switch, complete all as specified and directed.
S & F thermoplastic/polycarbonate enclosure bus bar chmaber, shockproof, vermin and dust proof complete with terminals for upto 3 phase cable of size 35 sqmm 3.5 core and 01 no MCB SP 6 amps including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole/wall, complete all as specified and directed.
M & L for aluminium lugs for LT cable connection and fixed complete suitable for cable of size of upto 35 sqmm, complete all as specified and directed.
M & L for aluminium lugs for LT cable connection and fixed complete suitable for cable of size from 50 to 95 sqmm, complete all as specified and directed.
Material & Labour for 1.1 KV heat shrinkable jointing kits, Indoor/out door end termination suitable for for underground XLPE cable of following size including taking out old/unserviceable joints and testing etc complete all as directed. (a) 16 to 35 Sqmm 3 ½ core
(b) 50 to 120 Sqmm 3 ½ core
(c) 150 to 300 Sqmm 3 ½ core
M&L for heat shrinkable 1.1 KV XLPE straight through joint suitable for under ground cable of following sizes complete all as specified and directed. (a) 16 to 35 Sqmm 3 ½ core
(b) 50 to 120 Sqmm 3 ½ core
(c) 150 to 300 Sqmm 3 ½ core
S & F for MCCB 4 pole upto 63 Amps rating 10 KA with suitable size of flat bars for connection, fixed thermal and magnetic settings, complete all as specified and directed.
S & F for MCCB 4 pole upto 100 Amps rating 10 KA with suitable size of flat bars for connection, fixed thermal and magnetic settings, complete all as specified and directed.
S & F for MCCB 4 pole upto 125 Amps rating 10 KA with suitable size of flat bars for connection, fixed thermal and magnetic settings, complete all as specified and directed.
Supply and fixing MCB SP rating 240V, 10KA, 'C' curve, of capacity 5 to 32 amps complete with connection, complete all as specified and directed.
Supply and fixing MCB DP rating 240V, 10KA, 'C' curve, of capacity 32 -63 amps complete with connection, complete all as specified and directed.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning: - (a) TPN 16 To 32 AMP
(b) TPN 40 To 100 AMP
S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220 volt with 100 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching all as specified and directed including taking down old one.
M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead strip of 25x4 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 32 mm bore for protection of GI strip from earth electrode to test point /machinery / equipment, supplying and laying charcoal dust comman salt PCC (1:2:4) type B1 using 20 mm graded stone aggregrate chamber and RCC cover 54 cm X 54cm x50 mm thick (1:2:4) type B-1 using 20 mm stone aggregate) reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, using round bar, PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in electrical plate No-3 of SSR part-1 including taking out the old one complete all as specified and directed Note - Cost of GI earth strip and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items.
Material & labour for cleaning, preparing the surface of steel tubular poles LT 9.0 mtrs long including removing of rust particles and painting with two coat of aluminium paint including cross arms, bracing, supports, clamps, eye hook etc., and providing Blue & white strips alternatively 30cm each from coping to 1.5 mtr height starting with blue strip using synthetic enamel paint, complete all as specified and directed.
M&L for PCC (1:2:4) type B1 using 20 mm gradded stone aggregate for coping of poles, panel board etc complete all as specified and as directed.
Supply, transporting, erection and fixing steel tubular swaged pole, 9.00 metres long, type 410 SP-31, complete with cast iron base plate, pole cap, finial taper plug, bolts, nuts, washers etc including necessary earth work and excavation in any type of soil, PCC in foundation 1:4:8 type D2, using 40 mm graded stone aggregate and PCC 1:3:6 type C2, using 40 mm graded stone aggregate as in plinth block as specified in SSR Pt I, disposal of surplus soil to a distance not exceeding 50 m, painting two coats of aluminium paint over one coat of red oxide primer including 3 nos band/straps with blue paint (150mm wide each) synthetic enamelled paint at a distance 300mm from plinth block at a gap of 15 cm between two bands and marking pole nos with black synthetic enamelled paint including tarring one coat on steel surface embedded in concrete, complete all as specified and directed.
M&L for Tube light grade galvanised with all fittings for earthing lead protection of under ground /on wall/pole size 20 mm dia complete all as specified and directed.
S & F in repair cage for protection/housing post top lantern made out of 4mm dia GI wire along with suitable size of angle iron frame fixed on foundation with necessary anchor fastner and nut bolts etc complete the size of cage should be 550x450x550 mm including one side with cage opening and locking arrangement and painted with two coats of black synthetic enamel paint over a coat of red oxide primer etc, complete all as specified and directed.
S & F sheet metal enclosure of minimum 3 mm sheet of suitable size consisting four aluminium bus bar of 200 amps at fixed suitable gapping in enclosure outdoor type with fixing capabilty on MS angle iron on walls/ground/poles, complete all as specified and directed.
M&L Point wiring using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 1.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked TEC and FIA approved in & including heavy duty, electric resistance welded (ERW) stove enameled surface Steel mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980 for four light points controlled by one Switch, including HFFR insulated unsheathed unitary construction copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. All conduit accessories such as bends elbows Tee etc shall be Flame proof certified by CMRS Dhanbad for the followings :- (a) One light/fan point controlled by one, one way switch
M&L Point wiring for socket point using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 2.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked TEC and FIA approved in & including heavy duty, electric resistance welded (ERW) stove enameled surface Steel mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980 for four light points controlled by one Switch , including HFFR insulated unsheathed unitary construction copper conductor 2.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. All conduit accessories such as bends elbows Tee etc shall be Flame proof certified by CMRS Dhanbad .
M&L for flame proof switch socket & plug combined point controlled by single pole one way 16 Amp ON-OFF rotary switch. Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth, complete all as specified and directed.
S&F in repair flame proof weather rotary switch with cable terminal box in cat aluminum alloy (LM-6) construction, epoxy powder coated, single pole 16 Amp ON/OFF type, 230 V AC, certified by CMRS for Group IIA & IIB complete including compression glands, complete all as specified and directed.
M&L for sub main wiring with approved colour coding as per IS (Red, Black and green for single phase circuits) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable (Red&Black colour) of size 4.0 sqmm drawn in and including steel rigid conduit not less than 32mm dia with its accessories, surface type, including one run of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable (Green colour) of size 4.0 sqmm as earth continuity and connected of common earth dolly complete all as specified & directed. Note:- Two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith steel conduit including its accessories shall be measured and paid one unit length.
Supply and fixing LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable, complete all as specifiedand directed.
Bikarma Enterprise
MAC ENGINEERS
TRIBENI SINGH AND SONS
SANYOG CONSTRUCTION PRIVATE LIMITED
MS JAGDAMBA ENTERPRISES
AAHAN CONSTRUCTION
VISHNUDEO CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .