Repair and Maintenance works to the Rolling Shutter in E Store at Central Store TTPS

Removing the damaged gear box and side channel with gear rod up to top, greasing gearbox, welding the gear wheel with gear rod alignment checking refixing in position overall and removing of bottom `T' angle, bend removing and welding the broken plates, top cover removing dismantling the lath from the roller, removing the spring, removing shaft, reconditioning of the shaft and spring cleaning the old grease strengthening if roller assembly and refixing in position loading the springs and overhauling the over shutter, gear box, roller, ball bearing etc., complete.

Painting two coats with ready mixed enamel paint for the old steel surface including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Providing two legged scaffolding for works above 3m heights (inner walls), using 13 to 15 cm. dia. casuarinas props, the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at 2m c/c including longitudinal & transverse middle braces to step up and providing a platform with country wood planks of 40 mm. thick & 1m width, etc. including cost of all materials, labours, lead, lift, safety measures, etc. complete.

Supplying of Rolling shutter lath leaf including cost of leaf, lead, lift, etc., complete.

Supplying of Rolling shutter Heavy type spring including cost of lead, lift, etc., complete.

S.KUNJAN (BID ID -1084768)