PROVN OF SECURITY FENCING FROM WAR MEMORIAL XXXX TO MAIN GATE AT XXXXX AT CHAKABAMA MIL STN

Amount

Excavation in post holes (or similer holes) each n.exc 0.5 Cum getting out, returning filling and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc. 50 m and making good the disturbed surface in hard and dense soil complete all as specified and as directed.

Material and Labour for plain cement concrete type C2 1:3:6 (using 40mm graded aggregate) as for in foundations, filling and mass concrete post holes for securing angle vertical posts complete all as specified and as directed.

Supply and fixing Angle Iron, Flat Iron, Hand rails, half round or other steel section or posts and struts in fencing drilled and countersunk for balusters running bars, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-410 Gde E-310 complete all as specified and as directed.

Supply and fixing Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fixing galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (each line wire to be measured).

Fixing only chain link fencing 4mm dia galvanised steel wire 100 x 100 mm mesh, made up into mattresses or cages, lapped including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanised steel wire fencing 4mm dia and 100 x 100mm mesh , made up into mattresses or cages,lapped wired complete all as specified and as directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc.10cm long but n.exc.15cm long, diameter of neck 11 to 15 mm complete all as specified and as directed.

Material and Labour Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed.

Material and Labour Preparation of new steel surfaces of any description, n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed.

Excavation in trenches not exceeding1.5metre wide and not exceeding1.5 metre in depth and not exc10Sqm on plan in any type of soil and getting out in hard and dense soil Complete all as specified and as directed.

Material and Labour for Cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for reinforcement cement concrete (Nominal mix) Type B1 (1:1.5:3) using 20mm graded aggregate as in footing , foundation beams, plinth beams, based for column Complete all as specified and as directed.

Material and labour for reinforcement cement concrete (Nominal mix) Type B1 (1:1.5:3) using 20mm graded aggregate as in column, pillars, piers, posts and struts Complete all as specified and as directed.

Supply and fixing framed work as in door or gate of angel,mild steel plate or other section with gusset plates, rails, braces, etc complete of Gde Fe -410 W or E-250, drilling ,welding etc for fixing of steel sheeting or other covering .Doors etc to be prepared for hanging or sliding Complete all as specified and as directed.

Supply and fixing mild steel work conforming to Fe-310-0 or Fe-410-0 in hold fasts of flat of flat iron , hooks, pintle hinges, cleats hand made sliding bolt and smilar items complete all as specified and as directed.

Material and Labour TMT bars (Fe 500),10mm dia and over in reinforcement cut to length,bent to shape required incl bending spirally cranking,hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips, all as specified and as directed.

_Ditto -all as per item No 17 here -in -before but 5mm dia and over upto and including 10mm dia in stirrups space and binders all as specified and as directed.

Material and Labour form work to flat sides of concrete foundation footing base of columns and raft beams sides and soffits (if any) of plinth beams complete all as specified and as directed.

Material and Labour form work sides of pillars, post struts pier columns square,rectangular or polygonal rough finished surface of concrete complete all as specified and as directed.

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed.

Material & labour for Plain cement concrete Type B1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate cast in situ in lintels up to 1.5m span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and as directed.

Material and labour for 12mm thick rendering in CM (1:4) on other than face of brick work or concrete surface, mixed with integral water proofing compound @ 3% by wt of cement, finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately)

Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) complete all as specified and as directed.

Material and Labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

Material and Labour 20mm thick Granite of any type work (table rubbed and polished) for wall lining (veneering to wall) in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed.

Supply and fixing 25 mm bore GI tubing medium grade galvanised with all fitting and fixed complete to wall or laid in floor complete all as specified and as directed.

Removal of excavated material (soil) to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Returing, filling in (soil) including spreading, levelling,watering and well ramming in layer not exceeding 25cm thick in any type of soil complete all as specified and as directed.

M/S MUNGA LAL PRASAD (BID ID -3174980)