Construction of upgradation of 50 bedded SubDistrict hospital to 100 bedded Sub District Hospital At. Karjat Dist. Ahmednagar

Amount

18 mm Thick fire retardant plywood (Make:- Century/Green ply/Ampro /Catsun/Wigwam )

12 mm Thick fire retardant plywood (Make:- Century/Green ply/Ampro /Catsun/Wigwam )

6 mm Thick fire retardant plywood (Make:- Century/Green ply/Ampro /Catsun/Wigwam )

25 mm CEMENT BONDED PARTICALE BORD (Make:- BISON BORD)

20 mm CEMENT BONDED PARTICALE BORD (Make:- BISON BORD)

18 MM CEMENT BONDED PARTICALE BORD (Make:- BISON BORD)

12 MM CEMENT BONDED PARTICALE BORD (Make:- BISON BORD)

12mm th. SOFT BOARD

0.80 mm Thick Fire Retardant LAMINATE SF (Make:- Merino/Greenlam/Arolam/ Royaltouch)

1 mm Thick Fire Retardant LAMINATE SF (Make:- Merino/Greenlam / Arolam / Royaltouch)

4.00 MM Thick SMOKED OCK OR EQUIVALENT ( SPICES) VEENER (ISI-1328) (Make:- Flitchess / TIMEX / Century)

4.00 mm MDF ( Exterior Grade waterproof ) (Make:- Ampro/Century ply / Green Ply)

6.00 mm MDF ( Exterior Grade waterproof ) (Make:- Ampro/Century ply / Green Ply)

BTC LIPPING - 22X6 ( 8 Ft. Long )

BTC LIPPING 25x10 ( 8 Ft. Long )

BTC LIPPING 25x10 ( 8 Ft. Long )

BTC LIPPING 38X10 MM ( 8 Ft. Long )

BTC LIPPING 50x10mm ( 8 Ft. Long )

BTC MOULDING 75X12 mm ( 8 Ft. Long )

BTC MOULDING 22x10 mm ( 8 Ft. Long )

BTC MOULDING 32X10 mm ( 8 Ft. Long )

BTC MOULDING 70X10 mm ( 8 Ft. Long )

BTC MOULDING 72X45 mm ( 8 Ft. Long )

BTC WOOD 50 MM X 50 MM THICK 9 FT. LONG

GLASS 6mm CLEAR GLASS (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

GLASS 8mm CLEAR GLASS (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

GLASS 10mm CLEAR GLASS (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

GLASS 12mm CLEAR GLASS (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

GLASS 6mm CLEAR TOUGHENED GLASS (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

GLASS 8mm CLEAR TOUGHENED GLASS (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

GLASS 10mm CLEAR TOUGHENED GLASS (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

GLASS 12mm CLEAR TOUGHENED GLASS (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

6.00 MM THK MIRROR (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

8 MM THK MIRROR (Make:- MODI/ SAINTGOBAIN/ ASAHI GLASS)

GLASS 6mm CLEAR FIRE RATED GLASS(Make:-MODI/ SAINTGOBAIN/ ASAHI GLASS)

6MM THICK BACK PAINTED GLASS (Make:-MODI/ SAINTGOBAIN/ ASAHI GLASS)

MOULDING ON GLASS EDGES.( levling, pencile, full round )

CRYSTAL POLISH ON GLASS EDGES

FROSTING ON GLASS

ACID & DIGITAL DESIGN ON GLASS

GLASS HOLE

CUTOUT FOR GLASS

ABRO TAPE (Make:- 3M/Abro/Flichess)

3M DOUBLE SIDED TAPE (Make:- 3M)

SILICONE TUBE

FEVICOL HYPER ( Non buble formula) (Make:-PIDILITE)

HEATX Adhesive (Make:-PIDILITE)

1.mm PICH SCREWS (Make:-RKJD /RPI /ZOA)

SELF TAPING SCREWS 13X4 (Make:-RKJD/RPI /ZOA)

SELF TAPING SCREWS 13X6 (Make:-RKJD/RPI /ZOA)

SELF TAPING SCREWS 16X6 (Make:-RKJD/RPI /ZOA)

SELF TAPING SCREWS 16X8 (Make:-RKJD/RPI /ZOA)

SELF TAPING SCREWS 19X8 (Make:-RKJD/RPI /ZOA)

SELF TAPING SCREWS 32X8 (Make:-RKJD/RPI /ZOA)

SELF TAPING SCREWS 75MM (Make:-RKJD/RPI /ZOA)

S.S SCREWS 13 X 4 (Make:-RKJD/RPI /ZOA)

S.S SCREWS 13 X 6 (Make:-RKJD/RPI /ZOA)

S.S SCREWS 16 X 6 (Make:-RKJD/RPI /ZOA)

S.S SCREWS 19 X 8 (Make:-RKJD/RPI /ZOA)

S.S SCREWS 32 X 8(Make:-RKJD/RPI /ZOA)

S.S SCREWS 75mm (Make:-RKJD/RPI /ZOA)

S.S SCREWS 100MM (Make:-RKJD/RPI /ZOA)

HINGES (L - 3")(Make:-CHETANA /CM /FAMA)

HINGES (W 3") (Make:-CHETANA /CM /FAMA)

Auto Closing Hinges Soft Close (Make:-HETTICH/HAFLE )

PREMIUM QUALITY 125mm 12 GAUGE BUT HINGES BRASS C.P. PLATED (Make:- CHETANA /CM /FAMA)

PREMIUM QUALITY POWDER COATED ALUMINIUM HINGES 125 MM (Make:- CHETANA /CM /FAMA)

S.S.CHAIN (8")

MAGNET (Make:-POOJA)

DISIGNER HANDLE 100 MM (4") (Make:-CPY /HETTICH/HAFLE )

DISIGNER HANDLE 150 MM (6") (Make:-CPY /HETTICH/HAFLE )

CONCEALED HANDEL 200MM ( 8") (Make:-CPY /HETTICH/HAFLE )

CONCEALED HANDEL 230 MM ( 9") (Make:-CPY /HETTICH/HAFLE )

H shape Glass Door Handel 12" (Make:-CPY /HETTICH/HAFLE )

H shape Glass Glass Door Handel 18" (Make:-CPY /HETTICH/HAFLE )

DRAWER CHANNEL 250MM (10" ) (Make:-HETTICH/HAFLE )

DRAWER CHANNEL 300 MM (12") (Make:-HETTICH/HAFLE )

DRAWER CHANNEL 350 MM (14")(Make:-HETTICH/HAFLE )

DRAWER CHANNEL 400 MM (16") (Make:-HETTICH/HAFLE )

DRAWER CHANNEL 450 MM (18")(Make:-HETTICH/HAFLE )

DRAWER CHANNEL 500 MM (20")(Make:-HETTICH/HAFLE )

DRAWER CHANNEL 560 MM (22") (Make:-HETTICH/HAFLE )

DRAWER CHANNEL 600 MM (24") (Make:-HETTICH/HAFLE )

DRAWER CHANNEL 660 MM (26") (Make:-HETTICH/HAFLE )

DRAWER CHANNEL 710 MM (28") (Make:-HETTICH/HAFLE )

CONCEALED DRWER LOCK (Make:-GODRGE/EUROPA/ENOX)

DISIGNER MORTISE LOCK WITH HANDEL (Make:-GODRGE/EUROPA/ENOX)

PREMIUM QUALITY BRASS SILVER PLATED ALDROP 250 MM (Make:-HINT/HARSH/N Series )

PREMIUM QUALITY BRASS SILVER PLATED ALDROP 300 MM (Make:-HINT/HARSH/N Series )

PREMIUM QUALITY BRASS SILVER PLATED TADIPATTI 250 MM (Make:-HINT/HARSH/N Series )

FOLDING SLIDING DOOR FITING 60MM ALUMINIUM HEAVY SECTION ( FOR GRILL FRENCH DOOR ) 8 feet long (Make:-HAFLE/ENOX/DEEPJYOTI)

CONSEALED DOOR CLOSER (Make:-GODRGE/HAFLE/ENOX)

DOOR CLOSER (Regular ) (Make:-GODRGE/HAFLE/ENOX)

PREMIUM QUALITY HYDRAULIC FLOOR SPRING DOOR CLOSER (Make:-CUBA , HAFLE , ENOX)

PREMIUM QUALITY BRASS SILVER PLATED TOWER BOLT 100mm (Make:- HINT/HARSH/N Series)

PREMIUM QUALITY BRASS SILVER PLATED TOWER BOLT 150mm (Make:- HINT/HARSH/N Series)

PREMIUM QUALITY BRASS SILVER PLATEDTOWER BOLT 200mm (Make:- HINT/HARSH/N Series)

PREMIUM QUALITY BRASS SILVER PLATED TOWER BOLT 300mm (Make:- HINT/HARSH/N Series)

S.S. CABLE MANEGER

P.V.C. CABLE MANEGER

PREMIUM QUALITY BRASS SILVER PLATED DOOR STOPER (Make:-HINT/HARSH/N Series)

CASTRER WHEEL

Stud 25mm Dia. For Glass 3"

MIRROR CAP 1/2"

MIRROR CAP 3/4"

MIRROR CAP 1"

Curtains rod

Glass Door Top patch Fitting for toughed glass (Make:- HAFLE /ENOX /OZONE)

Glass Door Bottom patch Fitting for toughened glass (Make:- HAFLE /ENOX /OZONE)

SPIDR PATCH FITTING for toughened glass (Make:- HAFLE /ENOX /OZONE)

GLASS PIVOT PATTI for toughened glass (Make:- HAFLE /ENOX /OZONE)

GLASS DOOR LOCK for toughened glass (Make:- HAFLE /ENOX /OZONE)

OVER PANEL PATCH FITTING for toughened glass (Make:- HAFLE /ENOX /OZONE)

SMALL L PATCH for toughened glass (Make:- HAFLE /ENOX /OZONE)

BIG L PATCH for toughened glass(Make:- HAFLE /ENOX /OZONE)

TWIM-PRO (Make:- HAFLE /ENOX /OZONE)

10mm X 150mm FASTENER

MELAMINE POLLISHING TO MOULDING & LIPPING.

Melamine Polish Groove (4mm)

6 mm Thick SOLID SURFACES GN Group (CORIAN) (Make:-DUPOINT /MARINO)

12 mm Thick SOLID SURFACES G4 Group (CORIAN) (Make:-DUPOINT /MARINO)

Jointer Adhesive for solid surface (Make:-DUPOINT /HANEX)

PINUP BOARD CLOTH

WALL PAPER (Make:-Excel/Wall-King /LG)

WALL Paper Adhesive (Make:-PIDILITE)

SPC 6mm Thick Flooring (Make:-A SQUARE IMPEX /RESPONSIVE FLOORING/WELSPUN)

SPC WALL SKIRTING (Make:-A SQUARE IMPEX /RESPONSIVE FLOORING/WELSPUN)

SPC WALL EDGE PATTI (Make:-A SQUARE IMPEX /RESPONSIVE FLOORING/WELSPUN)

14MM THICK ENGINEER WOODEN FLOORING (Make:-MIKASA /KINGDOM/GREEN )

2MM THICK HIT LOAN

14MM THICK ENGINEER WOODEN WALL SKIRTING (Make:-MIKASA /KINGDOM/GREEN )

14MM THICK ENGINEER WOODEN WALL EDGE PATTI (Make:-MIKASA /KINGDOM/GREEN )

POLYMER 9 MM THICK ACOUSTIC SHEET (Green material) (Make:-TRANQUIL/ ANUTONE/ TECHNO)

1000 gsm synthetic wool 50 mm Thick

4mm THICK FIRE RATED A.C.P. SHEET (Make:-VIVA / Eurobond)

3MM THICK S.S. PLATE

LASER CUTTING FOR S.S. PLATE

12MM THICK ALUMINIUM POWDER COATED SURFACES VENTILATOR

ALUMINIUM SEACTION WITH COLOUR ANODISING (Make:-JINDLA /ALUMINIUM PROFILE)

ALUMINIUM GLAZZING PATTI WITH COLOUR ANODISING (Make:-JINDLA /ALUMINIUM PROFILE)

ALUMINIUM SECTION RUBBER

ALUMINIUM DOOR WOOL STRIP

G.I. wooden powder coated ceiling panels 150 mm wide (Make:-Hunter Douglas/ Luxlon/ Laban/ Hypersil)

G.I. CARRIAR FOR WOODEN CELLINGMAIN RUNNER 10 ft(Make:-Hunter Douglas/ Luxlon/ Laban/ Hypersil)

WALL ANGLE ( ' L ' PATTI ) (Make:-Hunter Douglas/ Luxlon/ Laban/ Hypersil)

3MM THICK G.I WIRE SUSPENDER WITH BUTTERFLY CLIP (Make:-Hunter Douglas/ Luxlon/ Laban/ Hypersil)

3MM THICK MS PLATE WITH LEASER CUTTING for designer jali

CELLING FASTENER

DUCO PAINT WITH DUCO putti (Make:- DUCO/MRF)

DUCOPAINT LABOUR

UV PRINTED FROSTED FLIM (Make:- 3M/charcole/garvare )

LASERCUT DESINER GRILL AND DOOR FABRICATION LABOUR

OPERATION THEATEAR AREA S.S. FIRE RATED DOOR WITH FIRE RATED VISION GLASS.: Stainless Steel Double Swing Door with Honeycomb / Puff core doors 44mm thk & 0.8 mm(SS 304 Grade) Face sheet Single rebate frame 1.2mm thk(SS 304 Grade) and 100 X 57mm Jamb depth & width. SS / Single Doors Using Floor Spring CFS650 with SS Cover - Consort UK , Mortise Dead Lock With Cylinder , SS D Handle Pair -300mm- Geze Make (Make:-UNIVERSAL / AK KITCHEN MATE PVT. LTD. )

OPERATION THEATEAR AREA S.S. FIRE RATED DOOR WITH FIRE RATED VISION GLASS Stainless Steel Double Swing Door with Honeycomb / Puff core doors 44mm thk & 0.8 mm(SS 304 Grade) Face sheet Single rebate frame 1.2mm thk(SS 304 Grade) and 100 X 57mm Jamb depth & width. SS / Double Doors Using Floor Spring CFS650 with SS Cover - Consort UK , Mortise Dead Lock With Cylinder , SS D Handle Pair -300mm- Geze Make (Make:-UNIVERSAL / AK KITCHEN MATE PVT. LTD. )

X-RAY ROOM DOORS WITH LEAD LINING S.S. FIRE RATED DOOR :-Stainless Steel single Swing Door with Honeycomb / Puff core doors 44mm thk & 0.8 mm(SS 304 Grade) Face sheet Single rebate frame 1.2mm thk(SS 304 Ggrade) and 100 X 57mm Jamb depth & width.SS Double Door-H3 Lead Lined ( Double Door ) Using Floor Spring CFS650 with SS Cover - Consort UK , Mortise Dead Lock With Cylinder , SS D Handle Pair -300mm-Geze Make (Make:- UNIVERSAL / AK KITCHEN MATE PVT. LTD. )

X-RAY ROOM DOORS WITH LEAD LINING S.S. FIRE RATED DOOR :- Stainless Steel single Swing Door with Honeycomb / Puff core doors 44mm thk & 0.8 mm(SS 304 Grade) Face sheet Single rebate frame 1.2mm thk(SS 304 Grade) and 100 X 57mm Jamb depth & width.SS Single Door-H3 Lead Lined ( Single door )Using SS Ball Bearing Hinges , Mortise Dead Lock With Cylinder , Door Closer, SS D Handle Pair - 300mm (Make:-UNIVERSAL / AK KITCHEN MATE PVT. LTD. )

Ascostic black cloth to cover glass wood pannale

Providing and Fixing approved heavy duty u-poly vinyl chloride wall guard system maximum 150 millimetre wide suitable for crash protection on walls. The modular system shall include an aluminium retainer, u-poly vinyl chloride cover and u-poly vinyl chloride accessories including returns, inside and outside corners and brackets that are non-reflective, throughcoloured and textured to conceal the effects of impact and abrasion. Handrail profile on top shall be 38 millimetre diameter incorporating a thumb groove to offer a comfortable grip in line with guidance. Assembly shall be easy to fit, fixed using aluminium retainer and able to correct gentle undulations of substrate, in true line and level as per manufacturer's reco millimetre endation at locations identified as per drawings.

Providing and Fixing approved heavy duty u-poly vinyl chloride wall guard maximum 100 millimetre wide suitable for crash protection on walls. Wall guard shall have replaceable snap-on covers and end caps that are non-reflective, through coloured and textured to conceal the effects of impact and abrasion. Assembly shall be easy to fit, fixed using 50 millimetre clips and able to correct gentle undulations of substrate, in true line and level as per manufacturer's reco millimetre endation at locations identified as per drawings.

Providing and Fixing approved heavy duty u-poly vinyl chloride corner profile upto 1200 millimetre height from floor with maximum 75 millimetre wide flange suitable for crash protection at corners. Profiles shall be non reflective, through coloured and textured to conceal the effects of impact and abrasion. Profiles shall be fixed using self-adhesive tape in true line and plumb as per manufacturer's reco millimetre endation at locations identified as per drawings. Rate to include cost of any samples, mock-ups, cutting, drilling, accessories, tools, cleaning any stains and discarding waste etc. complete. Installed length shall be measured.

Providing and laying fully flexible 2 millimetre thick Permanently Static Conductive Pressed Homogeneous Vinyl Floor Covering of Tarkett make or approved equivalent, of approved colour over kotastone base flooring , with nondirectional design and even colour throughout the thickness, providing excellent resistance to wear and tear (Abrasion Group T) and minimum use area Class 34 as per ISO 10874 / complied with respective EN standard. Electric insulation properties on VDE 0100, Part 600 with Rj less than or equal to 5 x 104 Ohms and Electric resistance R less than or equal to 109 Ohms. The homogenous sheet top surface shall have a Polyurethane treatment by UV laser cross-linking. The floor covering shall achieve fire rating of class Bfl-s1, static electrical propensity <2 KV, low TVOC emissions after 28 days as per ISO 16000-6. The covering shall be compatible to hot-welding and bent up skirting, have anti-bacterial and anti-fungal properties, resistance to stains, and shall have minimum 5% recycled content to comply with GRIHA Environmental Product Description. The cost of this item includes all labour, materials and equipment required to lay the floor covering as per manufacturer's specifications and as directed by Engineer-in- Charge. Actual floor area covered shall be measured for payment.

Vinyl Flooring - Caping & CovingProviding and fixing Caping and coving for Mipolam Ambiance Ultra Evercare including LEVEL 0 self leveling. The caping & coving shall be of approved make and shall match with vinyl flooring. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, and leads, lifts at all Floors and shall be as directed by Engineer in charge.

Desigining, providing and fixing High Quality Printed Vinyl Sheet Rolls assembled adjacently to complete Computer Generated Graphics / Posters designed byArtist and approved by Architect / Client. The Vinyl Prints shall be stuck on existing finish surface using required adhesive to achieve smooth and clean surface without airbubbles / crevices including necessary lifting / scaffolding etc. complete.

CURTAINS : consisting of :- HOSPITAL CURTAIN TRACK : Made up of Aluminium Extruded of grade 6063 hollow section of rectangular shape size34mm x16mm of 16G with powder coating finish, as per choice : Supporting systems of curtain track shall consist of following; Wall bracket made up of plastic molded caps ROOF SUSPENSION : Made up of aluminium pipe . HOOKS : Comprises of wheel type runners for easy & smooth sliding of the curtain. CURTAIN CLOTH : antifungul, Chemically treated Stain retardant fabric with Top Mesh/net of nylon. Top mesh size carioes from 18"to 24" / Supply, InstallationTesting and Commissioing of Cubicle Curtain Track :Ceiling Cubical Partition Track Aluminum rail with plastic runner, rings and netted curtains It is made from heavy Duty Aluminium cubicle track size 20mm wide x 30mm high, made of aluminium natural anodized to 15 microns complete with continuous PVC liner, nylon gliders and hooks, plastic end cap, connecting bridge, overlapping joint connector, wall brackets with matching screws to make up cubicle height to 2100mm clearance from floor level at 1000mm spacing and securely fixed to above slab. as directed engineer incharge and approved by architect incharge

Supply, InstallationTesting and Commissioing of Cubicle Curtain Track :Ceiling Cubical Partition Track Aluminum rail with plastic runner, rings and netted curtains It is made from heavy Duty Aluminium cubicle track size 20mm wide x 30mm high, made of aluminium natural anodized to 15 microns complete with continuous PVC liner, nylon gliders and hooks, plastic end cap, connecting bridge, overlapping joint connector, wall brackets with matching screws to make up cubicle height to 2100mm clearance from floor level at 1000mm spacing and securely fixed to above slab.as directed engineer incharge and approved by architect incharge

Patient beds (manual) Supplying and placing in position of Semi Fowler Bed with dimensions 2265 millimeter (Length) X 900 millimeter (Width) X 610 millimeter (Height) with 2 – Section mattress of dimensions 1965 millimeter (Length) X 830 millimeter (Width) X 100 millimeter (Height) including IV pole (height adjustable, on bed) document holder and wherever required both side railing. It should have One function bed with adjustable backrest 70deg, with head board/foot board-ELECTRIC RESISTANCE WELDED round tubes of thickness 1.2 millimeter must be made with section 19, 25.4 & 31.7millimeter, bed frame – ELECTRIC RESISTANCE WELDED round & rectangular tubes should be used with thickness of 1.6 millimeter. Lying surface frame- ELECTRIC RESISTANCE WELDED round tubes should be used with thickness of 1.6millimeter with section 25.4 millimeter, lying surface must be made of COLD ROLLED CLOSE ANNEALEDsheet with thickness of 1millimeter and must be powder coated with anti microbial & anti rust coating. It should consist of mattress retainer to define the mattress position. For mechanisms- All functions should be operated with lead screw mechanism, ACME threaded EN8 made 6millimeter pitch for easy in movment.The castors should have High endurance, plastic injection molded castors of 125millimeter diameter having provision for diagonal locking with stem diameter 22millimeter to be provided for better stability. Anti rust, thermosetting epoxy polyester powder coating must be used. All powder coating must be in Ral White. Maximum working weight should be 135 kilogram. Rate shall include supplying of hospital grade linen cover for mattress and pillow with pillow cover as approved by engineer in charge.

Patient beds (Four function motorised) Supplying and placing in position of four function ICU (Intensive Care Unit ) Bed with manual Trendelenburg with dimensions 2120 millimeter (Length) X 1000 millimeter (Width) X 490-750 millimeter (Height) with 4 Section Mattress of dimensions 1950millimeter (Length) X 850 (Width) of ArjoHuntleigh /Hill- Rom/Stryker/Godrej. 1. Four sectional bed with two ¾ collapsible side rail. 2. Seven motorised functions as follows; A. Motorised backrest operation up to an angle of 80°± 5° B. Motorised knee break operation up to an angle of 35°± 5° C. Motorised Height adjustment from 340 millimeter (minimum height) to 690 millimeter D. Motorised single button push cardiac chair / auto contour position. E. Manual trendelenburg up to an angle of + 17°± 1° F. No Reverse trendelenburg. 3. High breaking load of 170Kg 4. Overall bed dimension should be 2120 millimeter (Length) X 1000 millimeter (width) 5. Mattress platform size should be 1950 millimeter (Length) x 850millimeter (width) 6. 1Numbers pendent handset to attend various bed positions. 7. Three integral cabled German Make actuators with optional battery backup. Certificate of make for the motor should beprovided. 8. Fully removable ABS plastic made ventilated design mattress platform sections. 9. When knee break function is activated, knee platform section should raise upward in parallel to bed frame above the heart level. This should be default function. 10. four 5 Inch diameter castors with individual wheel locking and unlocking facility. 11. 158 millimeter under bed clearance for effective hoist movement 12. Bed frame should be made up of high density carbon steel material with silver ion antimicrobial double powder coating treatment of paint with Bio Coat technology. 13. Easily Removable head and foot end board 15. Optional: Battery backup of 2 x 12V sealed rechargeable lead / acid gel 1.2 amp hr. incase of power failure 16. Power In: 1.5A max at 230V a.c, 50/ 60 Hz 17. Electrical shock protection for actuator: Class I, Type B 18. Liquid ingress protection for actuator: IP54 19. Standard accessories to be supplied with bed A. 1 Numbers IV Pole B. Four sectional foam Mattress with hospital grade linen cover, pillow and pillow cover as approved by Engineer in charge. C. 4 Drainage Bag holder hooks

Patient beds (Seven function motorised) Supplying of seven function ICU (Intensive Care Unit ) bed with Twin Wheel Central Locking with dimensions 2240millimeter (Length) X 980millimeter (Width) X 450-825 millimeter (Height) with mattress of dimensions 1990millimeter (Length) X 850millimeter (Wide) X 100 millimeter (Height) of 1. Four sectional bed with four blow molded ABS plastic split side rails 2. Seven motorised functions as follows; G. Motorised backrest operation up to an angle of 70°± 5° with angle indicator H. Motorised knee break operation up to an angle of 30°± 5° I. Motorised Height adjustment from 460 millimeter (minimum height) to 790 millimeter J. Motorised single button push cardiac chair / auto contour position. K. Motorised trendelenburg up to an angle of + 12°± 1° with angle indicator L. Motorised reverse trendelenburg up to an angle of - 12°± 1° with angle indicator M. Dual side CPR lever for quick backrest lowering. 3. High breaking load of 200Kg 4. Overall bed dimension should be 2240 millimeter (Length) X 980 millimeter (width) 5. Mattress platform size should be 1990 millimeter (Length) x 850millimeter (width) 6. 1Numbers pendent handset to attend various bed positions. 7. Four integral cabled European Make actuators with battery backup. Certificate of make to be provided. 8. Fully removable carbon steel made ventilated design mattress platform sections. 9. When knee break function is activated, knee platform section should raise upward in parallel to bed frame above the heart level. This should be default function. 10. ROHS approved four 5 Inch diameter castors with individual wheel locking and unlocking facility. 11. 158 millimeter under bed clearance for effective hoist movement 12. Bed frame should be made up of high density carbon steel material with silver ion antimicrobial double powder coating treatment of paint with BioCoat technology. 13. Easily Removable head and foot end board 15. Battery backup of 2 x 12V sealed rechargeable lead / acid gel 1.2 amp hr. in case of power failure 16. Power In: 1.5A max at 230V a.c, 50/ 60 Hz 17. Electrical shock protection for actuator: Class I, Type B 18. Liquid ingress protection for actuator: IP54 19. Standard accessories to be supplied with bed A. 1 Numbers IV Pole B. 4 Drainage Bag holder hooks C. Hospital grade linen cover for mattress and pillow with pillow cover as approved by engineer in charge. 20. Technical specification of foam mattress to be supplied with this bed; A. Pressure reducing mattress manufactured using high quality polyurethane foam ensuring excellent durability and recovery characteristics B. 3 different zones of horizontally cut foam with smaller cuts on either end designed for support and comfort C. The zoned areas of support varied according to anatomical distribution of body mass, to create high degree of conformity, especially near bony prominence D. Polyurethane ultra two-way stretch mattress cover with vapor permeable, water resistant, antimicrobial, bacteriostatic, fungi static, non-slip durable base, concealed zip, clearly marked Turntable® guide and washing instructions & designed to meet infection control guidelines. E. Double sided mattress which can be turned as well as rotated (4 way) is also available Cover F. Foam should compile fire retardancy certification G. Cover should compile fire retardancy H. The mattress

Patient beds (sheet beds) Supplying and fixing Sheet Bed without castors with fixed Head/Foot Board ( (Length) 2033 x (Width) 744 x millimeter (Height) x550 millimeter with Mattress 1940 millimeter (Length) X 700 millimeter (Width) X 100 millimeter (Height) millimeter, including IV pole (height adjustable, on bed), document holder and if required both side railings. Head board and foot board having curved profile at the top made of MS ELECTRIC RESISTANCE WELDED round tubes of thickness 1.6millimeter and diameter 31.75 millimeter. Head board and leg board is further strengthened by 3 vertical pipes each of thickness 1.2 millimeter and diameter of 19millimeter and 1 each Horizontal pipe of thickness 1.2 millimeter and diameter of 25.4millimeter,Lying surface should be made of 8 bend panel of COLD ROLLED CLOSE ANNEALED sheet of thickness of 1 millimeter . This 8 bend panel is further strengthened on the longetudienly edges by welding full length with the help of C shaped metal channel section. Middle of 8 bend panel is strengthened by 5 L shapedstiffeners. It should be strengthenedby trapezoidal contour ( rounded corner ) 10 nose, embossed cut out. All metal components should be pre treated with zinc phosphate and then powder coated with anti microbial epoxy polyester powder coating. should be supplied in knocked down construction to reduce carbon emission. Mosquito net pole holder should be provided on head and leg boards To ensure wood quality welding " Carbon dioxide Argon" process should be adhered to. Head board and leg board are connected to mattress platform thru L bracket at 4 corners to ensure rigidity, with the help of zinc plated screws, All metal components should be pre treated with zinc phosphate in 9 tank process and then powder coated with anti microbial epoxy polyester powder coating. Maximum safe working load must be 135 kilogram. The rate shall be inclusive of all labor, material, wastage, scaffolding, transportation, and leads, lifts at all Floors. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Paediatric Bed Supplying and placing in position Paediatric bed of overall dimension: 1570 millimeter (Length) X 830 millimeter (Width) X 630 ( H Till Bed Surface) with Mattress 1415millimeter (Length) X 785 millimeter (Width) X 75 millimeter (Height), including IV pole (height adjustable, on bed) and document holder. Head and foot board should be made of 15.8 and 31.75 millimeter diameter 1.6 millimeter and 1.2 millimeter thick ELECTRIC RESISTANCE WELDED tube. ELECTRIC RESISTANCE WELDED round tubes should be used with thickness of 1.6millimeter with section 32millimeter Lying surface must be made of COLD ROLLED millimeter and must be powder coated with anti microbial & anti rust coating. It should consist of embossed holes to give more stability and load bearing capacity. The bed should be provided with drop down type full side rails which should made of 15.9 diameter and 19 millimeter diameter and 1.6 millimeter thickELECTRIC RESISTANCE WELDED tube. Nylon6 made Leg shoe must be provided for avoiding wear & tear. Maximum safe working load must be 135 kilogram. All metal components should be pre treated with zinc phosphate in 9 tank process and then powder coated with anti microbial epoxy polyester powder coating . Maximum patient load should be 135 kilogram. Mattress should have single section 70 millimeter mattress and made of 40 density pu foam. The mattress should have high end heavy hellium cover which is water resistant, x ray permeable, fire retardant. The rate shall be inclusive of all labor, material, wastage, scaffolding, transportation, and leads, lifts at all Floors. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. The sample and make of the item shall be got approved from consultant and Engineer in Charge piror to execution

Attendant bed / Doctor room bed Supplying and placing in position of Attendant Bed with dimensions 1880millimeter (Length) X610millimeter (Width) X 545millimeter (Height) with suitable mattress of Amardeep/Hill-Rom/Stryker. The frame must have MS electric resistance welded Round Tube with section of diameteer 25millimeter, with thickness 1.6millimeter. The lying surface must be of COLD ROLLED CLOSEANNEALEDwith 1.6millimeter thickness. Leg shoe should be of Neoprepene Rubber with reinforced metal washer. The powder coating should be of Epoxy Polyester powder coating and maximum patient load is 135 kilogram. Rate shall include supplying of hospital grade linen cover for mattress and pillow with pillow cover as approved by engineer in charge. The rate shall be inclusive of all labor, material, wastage,scaffolding, transportation, ,, including all leads, lifts at all Floors. All material should be of approved make. All works complete as per drawing, technical specifications and shall be as directed by Engineer in charge.

Examination bed Supplying of Elixir Examination Table with drawer storage of dimensions 1957 millimeter (Length) X 625 millimeter (Width) X 808 millimeter (Height) adjustment from 0 to 30 degrees.Lying surface overall dimension 625 mix 65 millimeter x 1460 millimeter, Mattress and Upholstery is to be made with PU molded foam with density 50-55, 23millimeter thick. Mattress is to be projecting out from the understructure to provide soft touch from all sides. Seamless upholstery of approved shade is to be provided to avoid spread of bacteria. Head rest overall dimension is 625 millimeter x 497 millimeter x 65 millimeter made of PU molded foam with 50 -55 density and 23 millimeter thick. .Gas-lift assist to betted head rest with continuous adjustment from 0° to 30°. Understructure and top frame is to be made of ELECTRIC RESISTANCE WELDED square tube , os section 30millimeter x 30millimeter and 1.6 millimeter thick. Understructure is to be made of Mild Steel square tubes with unique styling that provides better strength and stability. It is to be provided to reduce vis to beual clutter and offers better access and reach.Top Drawer Unit is to be provided, made of COLD ROLLED CLOSE ANNEALEDsheet construction with SS handle and SS hinge. Sheet thickness 1.2 ,0.8 and 0.6. Top Drawer Unit is to be provided, made of COLD ROLLED CLOSE ANNEALEDsheet construction with SS handle and SS hinge. Sheet thickness 1.2 ,0.8 and 0.6.Top Drawer Unit is to be provided, made of COLD ROLLED CLOSE ANNEALEDsheet construction with SS handle and SS hinge. Sheet thickness 1.2 ,0.8 and 0.6 Two drawers at top; each of volume 510 x 334 x 95 millimeter are provided.BP Apparatus tray: COLD ROLLED CLOSE ANNEALEDsheet for handle. Sheet thickness 1.2 ,0.8 and 0.6. swivel tray is to be designed for BP Apparatus that should be concealed when not in use.Single Step stool is to be made of ELECTRIC RESISTANCE WELDED square tube. Textured and Rubber mat is to be provided, of 20millimeter x 20millimeter size. Tube 1.2 millimeter thick and mat 3.0 millimeter thick Size: 485millimeter (Length) X 335 millimeter (Width) X 210 millimeter (Height) Step stool is to be made of Mild Steel square tubes, is to be strong and firm. Top is to be made of textured rubber offering firm grip for climbing.There should be a ss 304 ELECTRIC RESISTANCE WELDED tube of 12.7 millimeter diameter and 1.2millimeter thick is to be provided at the back of the back rest section to mount tissue roll which should be used as tissue roll holder.Powder coating is to be Bacteriostatic and thermosetting epoxy polyester,formulated to fulfill the requirements for bacterial protection. Maximum patient load is to be 135 kilogram. Head Rest is to be adjustable 0 - 30°.BP Apparatus tray is to be provided to Swivel angle 0 to 180 deg. Approx. Rate shall include supplying of hospital grade linen cover for mattress and pillow with pillow cover as approved by engineer in charge.

Doctor room bed -BD8 Supplying of Ayush Attendant Bed with dimensions 2033 millimeter (Length) X 774 millimeter (Width) X 550 millimeter (Height) with mattress of dimensions 1940 millimeter (Length) X 750 millimeter (Width) X 100 millimeter (Height..

12 mm P.V.C. Sheets

18 mm P.V.C. Sheets

25 mm P.V.C. Sheets

18 mm fire retardant Block Borad

25 mm fire retardant Block Borad

32 mm fire retardant Block Borad

40 mm fire retardant Block Borad

P.V.C. Carpet

Graphical Filmimng On Glass (3M)

Mural Arts

S.S. Trolly for medical material convyeing

400*400 mm Tiles 12 mm Thikness For Parking

Aluminium Square section 100*200mm with Powder coating

Aluminium Square section 75*150mm with Powder coating

MEDICAL GAS SUPPLY Supply and fix medical Gas supply pipe line system comprising of following:-Oxygen System 2x8 Manifold with tail pipe, O-ring and NRV

Fully Automatic Control Panel for Oxygen

Oxygen Emergency 2x2 Cylinder manifold with tail pipe and NRV with MOX regulator

Oxygen Outlet with probe ( Double Lock only)

BPC flow meter with humidifier bottle

Nitrous oxide Emergency 4cylinder manifold with tail pipe and NRV.

Nitrous oxide Outlet with probe

Compressed Air System Consisting of 2 nos Anest Iwata make Air Compressors(Model BFT 150C-9), each having 15 HP Motor with 57.18 cfm capacity at 8.5Kg/cm2 pressure with common receiver of Capacity 1500 ltrs, common Air dryer, Pressure Reducing Unit etc.

Three Stage Filtration

Medical Air Outlet with probe ( 4 Bar)

Surgical Air Outlet with probe ( 7 Bar)

2 nos. of Atlas Copco BMV200 5 HP Motor, noise level 69db, nominal power rating at 50hz 3.7KW with 2000 litres Receiver, Filters, Electricals, etc.

Bacteria Filter

Vaccum outlet with probe.

Vaccume meter Major for Wards (600 ml jars)

Vaccume meter Major for O.T (2000 ml jars)

Supply and fix Copper pipe-medical Grade Coppe Pipes 76 MM

supply and fix Copper pipe-medical Grade Coppe Pipes 54 MM

supply and fix Copper pipe-medical Grade Coppe Pipes 42 MM

supply and fix Copper pipe-medical Grade Coppe Pipes28MM

supply and fix Copper pipe-medical Grade Coppe Pipes 22 MM

supply and fix Copper pipe-medical Grade Coppe Pipes 15 MM

supply and fix Copper pipe-medical Grade Coppe Pipes 12 MM

ISOLATION VALVES 15 MM Isolation Valve

22MM isolation valves

28 MM Isolation valves

42 MM 1solation valves

Area Alarm Panel (6 Gas) disgital Indigenious

Area Alarm Panel 4 Gas)digital indigenious

Area Alarm Panel 3 Gas)digital indigenious

Area Alarm Panel 2 Gas)digital indigenious

Valve Box (6 Gas) Without Valves

Valve Box (4Gas) without valves

Valve Box (3 Gas) without valves

Valve Box (2 Gas) Without Valves

Electrical Pannel for air Compressors / Vaccum

Low pressure tubing

High Pressure tubing

AGSS Outlets

AGSS Remote Switch

Duplex AGSS pump

2 cylinder emergency with Regulator

CO2 outlets

CO2 2 cylinder Manifold with Tail Pipe, NRV and O-ring

Creative seating systems

Premier Glass and Hardware