Maint of internal electrification in md and OTM accn at certain building of 27 Punjab 23 WEU and repair maint of external water supply systems and allied works of pumping system at Nagpani highest point and of entire area of Chaubattia under GE Ranik

Amount

BOQ ( Sch A ) Internal Electric and Ext water supply works Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete all as specified and directed.

Supply and fixing point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) with all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone / PCC block masonary wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size multistranded copper conductor cable as in earth wire and connected to common earth dolly complete all as specified (Note:- wiring shall be in done in colour coding as directed by Engineer in charge )

All as per item No 2 here in before but one light point controlled by two 2- way switch

All as per item No 2 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 2 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item No 2 here in before but wiring with using cable 2.50 sqmm size multistranded copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size multistranded copper wire for one 6 pin socket outlet, 15/16 Amp on independent board.

Supply & Fixing point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable ( FRLS) drawn into existing conduit and terminal boxes and matching the existing surface, mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated Bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size multistranded copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed. (Note:- wiring shall be in done in colour coding as directed by Engineer in charge )

All as per item No 7 here in before but one light point controlled by two 2- way switch

All as per item No 7 here in before but One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 7 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item No. 7 hereinbefore but wiring with using cable 2.50 sqmm size multistranded copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size multistranded copper wire for one 6 pin socket outlet, 15/16 Amp on independent board.

Supply and fixing point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing capping of suitable size with its all necessary fittings and accessories on wooden / stone / brick/PCC block masonary wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size multistranded copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed. (Note:- wiring shall be in done in colour coding as directed by Engineer in charge )

All as per item No 12 here in before but One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 12 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item No. 12 hereinbefore but wiring with using cable 2.50 sqmm size multistranded copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size multistranded copper wire for one 5/6 pin socket outlet, 15/16 Amp on independent board.

Supply and fixing of switch piano flush type single pole one-way 5/6 Amp complete all as specified and directed.

Supply and fixing of switch piano flush type single pole Two way 5/6 Amp complete all as specified and directed.

Supply and fixing of switch piano flush type single pole one-way 15/16 Amp complete all as specified and directed.

Supply and fixing of socket outlet 5/6 Amp, 5 pin , flush type complete all as specified and directed.

Supply and fixing socket outlet 2-in-1, 3 pin 5/6 and 15/16 Amp flush type, complete all as specified and directed.

Supply and fixing lamp holder angle type, PVC / polycarbonate type insulated body with back plate suitable for batten / wall fittings complete all as specified and directed.

Supply and fixing of ceiling rose, PVC / polycarbonate isolated body three terminal complete all as specified and directed.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole complete all as specified and directed.

Supply and fixing of bell push, piano flush type, single pole 5 amps complete all as specified and directed.

Supply and fix High quility LED T8 indoor batten tube light 20 Watt with aluminium extrusion in D shaped have large diameter for increased convection heat transfer incl one LED PC tube rod and driver, internaly pre wired of 1.5 sqmm twin twisted flexible cable all as specified & directed.Make- Havells,Bajaj & Crompton

Supply and fix in replacement High quility LED T8 tube rod 20 Watt (with inbuild driver) with single side connection including connection with wire of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.Make- Havells,Bajaj & Crompton

Supply and fix High quility T5 integrated LED batten tube light 20 Watt with aluminium extrusion with frosted PMMA/PC diffuser, internaly pre-wired of 1.5 sqmm twin twisted flexible cable all as specified & directed.Make- Havells,Bajaj & Crompton

Supply and fix High quility LED lighting fixture mirror type with high output diffuser 2 feet 1x 10 Watt. 220V AC,complete with polycarbonate tube, white/warm white suitable for mirror light internally pre-wired of 1.5 sqmm three core flexible cable complete all as specified & directed.Make- Havells,Bajaj & Crompton

Supply and fix high quality indoor LED PLL base lamp 4 pin, 18 Watt (with inbuild driver) complete all as specified and directed.

S & F in repair MCB single pole, 240 volts, 5 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type in the MCB DB including taking down complete all as specified and directed.

S & F in repair MCB Double pole, 240 volts, 16-32 Amp, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

S & F in repair MCB Four pole, 415 volts, 40 to 100 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in repair sheet metal enclosure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in repair sheet metal enclosure for DBs(double door type) Triple pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 25 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 10 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 25 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 6 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Taking out old unserviceable service connection cable for replacement including S&F service connection cable, 1100 volts grade heavy duty PVC insulated multistranded aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost to Govt by Contractor.

S & F Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories and cutting opening on wall and making good as per existing surface complete all as specified and directed

Taking down for Repair of Exhaust fan of size 250 mm to 450 mm sweep of any type including replacement of burned copper winding, bearing and any other accessories and refixing after repair with suitable size nut bolts and wire complete all as specified and directed.

Supply and fix in repair switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fix in repair socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply and fix in repair switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply and fix in repair socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S & F in repairs Plug top 3 pin 15 Amp, complete all as specified and directed

S & F in repairs modular type switch, single pole, one way, 6 Amp complete all as specified and directed

S & F in repairs modular type socket outlet, multi 5 pin, 6 Amp complete all as specified and directed

S & F in repairs modular type switch,single pole, one way, 16 Amp complete all as specified and directed

S & F in repairs modular type socket outlet 2 in 1, 3 pin, 6 Amp &16 Amp complete all as specified and directed

Supply and fix in repair modular white cover plate with frame 1 module complete all as specified and directed.

Supply and fix in repair modular white cover plate with frame 2 module complete all as specified and directed.

Supply and fix in repair modular white cover plate with frame 3 module complete all as specified and directed.

Supply and fix in repair modular white cover plate with frame 4 module complete all as specified and directed.

Supply and fix in repair modular white cover plate with frame 6 module complete all as specified and directed.

Supply and fix in repair modular white cover plate with frame 8 module complete all as specified and directed.

Supply and fix in repair modular metal flush box 1/2 module complete all as specified and directed.

Supply and fix in repair modular metal flush box 3 module complete all as specified and directed.

Supply and fix in repair modular metal flush box 4 module complete all as specified and directed.

Supply and fix in repair modular metal flush box 6 module complete all as specified and directed.

Supply and fix in repair lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

S & F Recess mounting LED 300x300 mm luminaire,18 W, 220V, suitable for Recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- Havells,Bajaj & Crompton

S & F Recess mounting LED luminaire 600mm x 600 mm ,36 W, 220V, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- Havells,Bajaj & Crompton

M & L in repairs refrigerator/deep freezer of any size including repairing of damaged body and refilling of gas of freezer and repalcement of defective parts and accessories including complete servicing and testing after repair complete all as specified and directed.

S & F in replacement bldg security light luminaires of 25 watt LED suitable for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing fitting made of 32mm bore light grade GI pipe connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. Make- Havells,Bajaj & Crompton

S & F LED post top lantern 25 W suitable for gate lights with diffuser and made in die cast aluminium housing as per Cat Part No BGCTN 25W LED WW of make BAJAJ or its equivalent cat part in make of Philips/C&S/Havells, complete with all accessories and base plate including PCC work (1:3:6 ) type C1 (using 20mm graded stone aggrigate) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

S & F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser complete with all accessories and including LED light driver holder connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

S & F for flexible LED strip (5m roll), 24 W suitable for cove/column light with driver including connecting up, 230 volt, 50 Hz of Make Havells/Bajaj/Philips/C&S complete all as specified and directed.

S & F for LED foot/step light 7W water proof suitable for staircase and wall including connecting up, 230 volt, 50 Hz of Make Havells/Philips/C&S/Bajaj complete all as specified and diected.

S&F wall bracket type, 09 watt LED decorative fixture made up of polycarbonate base B-22 including LED Lamp of Make Havells Cat part No: LHDL06160099 or its equivalent cat part in make of Bajaj/C&S/Philips complete all as specified and directed.

S&F bed side LED light fitting , 6 watt, with independent switch & G-22 holder and LED lamp complete all as specified and directed.

S & F suspended type LED luminaire 36 W, 220V, with high efficiency soft glare free light suitable for low height ceiling applications complete with driver and all accessories internally pre-wired and including necessary suspension system, joining kit & cable and fixing in ceiling/panel and connecting up with twin core twisted flexible copper conductor cable with suitable size of Make Havells/ Bajaj/ C&S complete all as specified and directed.

S&F recess mounted LED downlighter aluminium heat sink type, 09 watt with PC diffuser in white powder coated finish with integrated driver of Make Havells/Bajaj/C&S complete all as specified and directed.

S & F in repair surface suspended LED circular luminaire, 25 W, 230 volt, suitable for suspended mounting with CNC stretch bent extruded aluminium in powder coated housing panel for surface mounting with an effective height of 70 mm and produces diffused planar and low glarel illumination complete with driver and all accessories internally pre wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- TORUS600RDP/S25WLED857SPMMAWH or its equivalent cat part in make Bajaj,Crompton.

S & F LED bollard fitting suitable for 12 to 20 Watt LED bulb with B-22 porcelain holder with cover fully cast aluminium body finished with polyurethane paint (with prior treatment) & clear acrylic diffuser having 7 duly stack lowers including all fittings (Total length 939 mm, base dia 231 mm, breadth 160 mm) and LED warm white bulb 12 Watt as per Cat Part No MBL-BR-23 of make Mepro electrical or its equivalent make in Bajaj/Havells, complete with all accessories and including PCC work (1:3:6 ) type C1 (using 20 mm graded stone aggrigate) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

S & F in repair prepaid meter counter interface unit with inbuild load control switch (display unit) as per existing secure make and model complete all as specified and directed.

S & F in repair 6 core control cable to connect meter to parallel home display split unit for remote access of data/ operation including two cable end connectors (RJ-11), punching complete all as specified and directed.

S & F in repair recessed on wall, meter box fabricated from 1.2 mm CRCA sheet of as per existing adequate size of secure meter, nominal for single phase meter 01 No, foamed in PU gasket, hinged door, cable gland plate 2 mm thick provided at bottom cum locking arrangement complete all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exc 1.5mtr in depth for laying pipe line and getting out including trimming sides and forming bottom surface to the required level/slope etc. complete all as specified and directed

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed.

Returning, fillingin, in tranches including spreading ,levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

Taking up or down existing 100mm bore GI steel water tubing of any grade including all GI fittings (such as bend,elbows,tees, connections, short pieces, bolts, nuts, unions, caps & plugs etc) laid in trenches or fixed on walls or on open surfaces complete all as specified and directed.

All as per item No 82 above but 80mm bore.

All as per item No 82 above but 50mm bore.

All as per item No 82 above but 40mm bore.

All as per item No 82 above but 25mm bore.

All as per item No 82 above but 20mm bore.

Fixing only 100mm bore steel water tubing , medium grade galvanised with and including all new GI fittings (such as bend,elbows,tees, connections, short pieces, bolts, nuts, unions, caps & plugs etc) laid in trenches or fixed on walls or on open surfaces complete all as specified and directed. Note:- All the connecting accessories and GI Fittings like sockets, bend,elbows,tees, connections, short pieces, bolts, nuts, unions, caps & plugs etc) required for connection to be provided by contractor without any extra cost and only 100mm bore GI pipe medium grade shall be issued under Sch 'B' for fixing only.

S & F 80mm bore steel water tubing medium grade galvanised with and including all GI fittings (such as bend,elbows,tees, connections, short pieces, bolt, nuts, unions, caps & plugs etc) laid in trenches or fixed on walls or on open surfaces complete all as specified and directed.

All as per item No 89 above but 50mm bore.

All as per item No 89 above but 40mm bore.

All as per item No 89 above but 25mm bore.

All as per item No 89 above but 20mm bore.

Taking out old unserviceable 50mm bore (nominal bore) gun metal, globe or gate valve with and including S & F gun metal, globe or gate valves ISI marked class-I, with iron wheel head, screwed both ends, for iron pipe complete all as specified and directed.

All as per item No 94 above but 40mm bore (nominal bore).

All as per item No 94 above but 25mm bore (nominal bore).

All as per item No 94 above but 20mm bore (nominal bore).

All as per item No 94 above but 15mm bore (nominal bore).

Taking out old unserviceable sluice valve for replacement with and including, supplying,testing and commissioning of 150mm bore (nominal bore) sluice valve of cast iron body flanged and drilled as per ISI 14846 (ISI Marked) specifications PN-1.6 with stainless steel nuts,bolts, washers & fibre/rubber gasket steel spindle complete all as specified and directed.

All as per item No 99 above but 100mm bore (nominal bore).

All as per item No 99 above but 80mm bore (nominal bore).

Disconnecting of existing NRV with and including supplying, installion, commissioning , connecting and testing of 150mm bore cast steel Non Return Valve, class 300 ASA, flanged and drilled both ends with gun metal seat and making bypass arrangement flanged type complete with & including flanges,fibre sheet gasket, nut-bolts & washers complete all as specified and directed.

All as per item No 102 above but 100mm bore.

All as per item No 102 above but 80mm bore.

Taking up or down existing 100/150mm bore (nominal bore) GI steel water tubing of any grade including all fittings and accessories from trenches/open surfaces,tanks including cleaning ,re-threading the old threads, cutting, welding work, etc as required and re-fixing the same after necessary repair works, etc as required , with and including supply and fixing new GI fittings and accessories as required in new or old position including necessary excavation and earth work in any type of soil complete all as specified and directed.

All as per item No 105 above but 80mm bore (nominal bore).

All as per item No 105 above but 50mm bore (nominal bore).

All as per item No 105 above but 40mm bore (nominal bore).

All as per item No 105 above but 25mm bore (nominal bore).

M & L for cleaning of Nagpani pump house and its surrounding by removing grass, shrubs, fungus, algee including cleaning of valve pit chambers within the boundary of the installation/pump house complete all as specified and directed.

M & L for cleaning of Highest point pump house and its surrounding by removing grass, shrubs, fungus, algee including cleaning of valve pit chambers within the boundary of the installation complete all as specified and directed.

Demolition of existing unserviceable masonry valve pit including all accessories like angle iron frame, door fixed with MS sheet cover etc with and including M & L for construction of brick masonery valve pit of size 610x610x610mm (internal dimensions) with brick work of sub class 'B' old size bricks built in cement morter 1:4 and 10mm thick rendering in CM 1:6 on internal and exposed external surface and including 40x40x6mm mild steel angle frame, 3.15mm thick mild steel sheet cover with two Nos shutters with handle and locking arrangement and 1 No 50mm size 4 levers lock with key in duplicate make Navtal including painting steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified, shown on drawing and as directed.

Demolition of existing unserviceable masonry valve pit including all accessories like angle iron frame, door fixed with MS sheet cover etc with including and M & L for construction of brick masonery valve pit of size 1050x1050x900mm (internal dimensions) with brick work of sub class 'B' old size bricks built in cement morter 1:4 and 10mm thick rendering in CM 1:6 on internal and exposed external surface and including 40x40x6mm mild steel angle frame, 3.15mm thick mild steel sheet cover in two Nos shutters with handle and locking arrangement and 1 No 50mm size 4 levers lock with key in duplicate make Navtal including painting steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified, shown on drawing and as directed.

M & L for repairs to existing leaking joints (flanged/socketed/collar) upto 50 mm bore GI pipe line with and including supply and replacement of flanged/socket/union /reducer etc with and including all necessary GI nut bolts, fibre/rubber gasket sheet and welding work wherever required, to make the joints leak proof including necessary cutting threading etc,including necessary excavation and earth work in any type soil complete all as specified and directed.

M & L for repairs to existing leaking joints (flanged/socketed/collar) 80mm bore GI pipe line with and including supply and replacement of flanged/socket/union /reducer etc with and including all necessary GI nut bolts, fibre/rubber gasket sheet and welding work wherever required, to make the joints leak proof including necessary cutting threading etc,including necessary excavation and earth work in any type soil complete all as specified and directed.

M&L for repairs to existing leaking joints /flanged /socket/ collar for 100mm/150mm dia GI pipe line including replacement of flanged/socket/union/reducer etc with and including all necessary nuts, bolts, fibre/rubber insertion sheet and welding wherever required, to make the joints leak proof including necessary cutting, threading etc, including necessary excavation and earth work in any type of soil complete all as specified and directed.

Complete cleaning of 80000 gallons capacity at Nagpani pressed steel/iron water storage tank from inside, extraction of all mud/sand/dust/Algee deposits, making it free from algee growth by scrapping & washing with water & painting with two coat of black bituminous paint on all the MS items fitted inside and complete external surface of tank and staging / supports etc, inlet/outlet water pipe complete all as specified and directed.

All as per item No 117 above but 38000 gallons capacity at highest point.

All as per item No 117 above but 20000 gallons capacity at Nagpani.

All as per item No 117 above but 10000 gallons capacity at Chaubattia.

Complete cleaning of masonary water storage reservoir of 5 lakh gallons capacity at chaubattia from inside, extraction of all dust/sand/mud/Algee deposits, making it free from algee growth by scrapping with brush, washing with water cleaning of all MS /iron/wooden frame work inside and roof of the reservoir & general cleanliness of the outside surface/area surrounding of the all plastered internal surface (excluding floor) of the tank and treatment with bleaching powder on the tank floor after cleaning & applying two coats of approved make & shade of cement base paint on all sides of the tank & two coats of approved make & shade of cement base paint of all sides of the outside of the tank including necessary painting with one coat of black bituminous paint on all steel /iron frames/angles surfaces of tank over black paint of size 2.5 fit x 1.5 fit including writing of tank capacity and date etc of cleaning with thick white synthetic enamel paint. The entire Job is to be carried out all as specified and directed.

All as per item No 121 above but 3 lakh gallons capacity at Chaubattia.

All as per item No 121 above but 42000 gallons capacity at Highest point.

All as per item No 121 above but 50000 gallons capacity at Chaubattia.

Supply and fixing in repairs coupling male and female with shaft allignment for pumping set 100HP size as per existing make /sample complete all as specified and directed.

Supply and fixing in repairs pump bearing for 100 HP pumping set pump as per existing make/sample complete all as specified and directed.

Supply and fixing in repairs pump bearing for 75 HP pumping set pump as per existing make/sample complete all as specified and directed .

Supply only Calcium Hypochlorite (65%-70%) (Common name-Stable Bleaching Powder or High Strenth Bleaching Powder) chlorination chemical for drinking water disinfaction with batch lab, test report of chemical required for each lot of consignment. Brand as per generic specification for calcium hypochlorite complete all as specified and directed.

Supply only Polyaluminium Chloride(PAC) at Nagpani pump house complete all as specified and directed.

Supply only 4 mm thick fibre sheet complete all as specified and directed.

Supply only 6 mm thick fibre sheet complete all as specified and directed.

Supply only 3 mm thick leather packing sheet used to be used in GI tubing connections complete all as specified and directed.

Supply and fixing in repairs coupling rubber washer as per sample complete all as specified and directed

Supply and fixing in repairs connecting copper lugs 95 Sqmm with incoming & outgoing feeder starter to motor connector complete all as specified and directed.

Supply & fixing in repairs Copper finger suitable for Oil immersed starter 100 HP complete all as specified and directed.

Supply and fixing in repairs Copper gutka suitable for Oil immersed starter 100 HP complete all as specified and directed.

M&L for PVC insulated unsheathed copper conductor 1100 V industrial cable 50 sqmm multi-stranded single core, including connecting with copper lugs 50/95 Sqmm with incoming & outgoing feeder starter to motor connector including taking down old unserviceable cable complete all as specified and directed

Supply & Fixing in repairs Heating Element copper sheathed and nickel plated 1500 Watt triangular type complete all as specified and directed.

Supply & Fixing in repairs Heating Element copper sheathed and nickel plated 2000 Watt triangular type complete all as specified and directed.

Supply & Fixing in repairs Thermostat with temperature auto cut, 240 volt for water heater , complete all as specified and directed.

M & L for connecting and testing of CI air release valve 50 mm size with ISI marked flanged type incl jointing material such as fiber board, nut bolt, washers, and welding etc including taking out old unserviceable air release valve complete all as specified and directed.

M & L for connecting and testing of CI air release valve 40 mm size with ISI marked flanged type incl jointing material such as fiber board, nut bolt, washers, and welding etc including taking out old unserviceable air release valve complete all as specified and directed.

Supply only Bleaching powder complete all as specified and directed.

Taking out old unserviceable Water level indicator with and including supply and fixing FRP scale conventional / Mechanical water level indicator complete with float, wire, float guide pipe , bracket & pulley, counter weight, indicator pin, etc including all accessories all as specified and as directed

Supply in replacement digital water TDS testing kit complete all as specified and directed.

Supply and fixing water testing solution O-TOLODINE bottle 500 ML complete all as specified and directed.

Collecting samples of under ground sump water from chaubattia UG Sump 5 lacs gallons capacity, 3 lacs gallons capacity and from Highest point pump house for Bacteriological testing and complete Chemical testing for parameters for raw & treated water as specified. Note : The bacteriological and chemical testing of water shall be carried out in Govt authorised laboratory . The rate quoted by contarctor shall deemed to be included the collecting of samples of water from UG sump and Pump house site and charges of Govt authorised laboratory for carrying out testing of water sample shall also born by the contarctor.

Supply & Fixing in repairs galvanised iron ISI marked heavy duty drilled flanged suitable for 80 mm bore pipe line complete all as specified and directed

Supply & Fixing in repairs galvanised iron ISI marked heavy duty drilled flanged suitable for 100 mm bore pipe line complete all as specified and directed

Supply & Fixing in repairs galvanised iron ISI marked heavy duty drilled flanged suitable for 150 mm bore pipe line complete all as specified and directed

Supply and fixing in repairs nuts, bolts and washer for pumping set 12.5/40/75/100HP size as per sample complete all as specified and directed

S & F in repairs mild steel framed work such as grills, gratings etc with ends of bars soldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, mokey caging, and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

Material & Labour for preparation of existing old untreated CGI/PGI sheet roof surface of any description not otherwise described over 10 cm in width or girth by cleaning , removing dust and including washing and cleaning etc to receive painting and making good with red lead wherever required and applying two coats of roof paints (Coptic of Jenson & Nicholson or Antisol of Berger or its equivalent brand in make ASIAN Paints as specified in particular specification ) complete all as specified and directed.

M & L for preparartion of old painted steel and iron surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete as specified and directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high on existing iron/steel surfaces complete as specified and directed.

Material and Labour for repair to electrically driven centrifugal pump set (75/100 HP motor-pump set) including servicing, cleaning, and replacement of water body, kit seal cup, screw ring retainer and burnt out nut, bolts etc of any size and capacity complete all as specified and directed

Material and labour for chart/ poster/ diagram / name plate etc made out of perpex sheet 2 mm thick, of size 2 m x 1.5 m cut to size and shape with colour background and diagram and letters including fixing arrangement with screws / adhesives as required complete all as specified and directed. Note: The content and size of chart/ poster /diagram / name plate etc shall be given by the Engr in charge during execution of work.

M&L for notice board of size 50x20 cm and written as "OUT OF BOUND FOR ALL RANKS", made from 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures in signal red colour and fixed with MS clamps, bolt and nuts of approved size complete all as specified and directed.

M&L for notice board of size 50x20 cm and written as "NO ADMISSION", made from 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures in signal red colour and fixed with MS clamps, bolt and nuts of approved size complete all as specified and directed.

M&L for preparation of newly painted steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W(Gde- E-250) quality- A complete all as specified and directed.

Dismantaling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed with self tapping screws complete all as specified and directed.

Supply & Fix in replacement for WATER SUPPLY SCHEMETIC DIAGRAM/CHART depicting water supply distribution system of Chaubattia station , depicting all the vital installations/equipments like Pump houses, main pumping/distribution lines, major sluice valves and supply lines on wooden board and acrylic sheet (tampered proof) front side with proper indicating lamp for all the major distribution lines and connected equipments with lighting arrangement & on/off switch for all the sections. Size of the board shall be standard as per sample provided of 4ft X 4ft. Before finalization of schematic diagram contractor shall deploy a qualified engineer/consultant for site survey and will submit the complete layout/schematic plan for approval of GE complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type D-2 (using 40 mm graded stone aggregate) as in base for flooring and finishing surface of concrete even and smooth wihout using extra cement complete all as specified and directed

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed

aditya construction

M/S NAYAL ELECTRICALS