SPL REPAIR TO JCOs MD ACCN BLDG NO.P-598 (01 TO 06) SS COLONY OF 92 BH AT BB CANTT, SRINAGAR

Amount

Taking down chokats or frame with shutters (without taking off shutters from frame) not exc 1.5sqm each and removing from site complete all as specified and directed.

Taking down chokats or frame with shutters (without taking off shutters from frame) exc 1.5sqm and n.exc 4.0sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description not exc 1.0sqm each and removing from site complete all as specified and directed.

S&F 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) fitted to chowkats complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F butt hinges medium weight 100mm size colled rolled mild steel complete all as specified and directed.

S & F 150mm size aluminium anodised barrel tower bolts of extruded section all as specified and directed.

S&F 150mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

S&F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Aluminum powder coated (thickness or powder coating not less than 50 micron of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831), bottom of size 92 x 31.75 x 1.50mm (section No 20832) and shutter top & bottom of size 40 x 18 x 1.55mm (section No 20736) and side (handle) of size 40 x 18 x 1.55mm (section No 20738) and lock side shutter frame of size 40 x 18 x 1.45mm (section No 20737) and for wire quage shutter of size 18 x 43.50 x 1.35mm (Section No. 20791) with locking arrangement including stainless steel wire mesh 0.36 mm nominal diameter of wire with 1.40mm average aperture and fixed with stainless steel wire staples and providing 5.5mm thick tinted glass with necessary rubber beading gasket and aluminum (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc including making good to the disturbed surfaces all as specified and as directed.

S&F aluminium anodised powder coating of any colour (thickness or powder coating not less than 50 micron) ventilator shutters, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 x 38.0 x 1.70mm thick, half portion glazed with 4mm thick frosted glass with glazing clips, rubber packing, anodised aluminium snap beading, half portion louvers of 80mm wide & 4mm thick frosted glass including aluminium louver patti & SS wire gauge of 0.36mm dia of wire and 1.40mm average width of aperture with 25x3mm thick aluminium strip fixed with screw to upper half portion of ventilator with all fittings and fixture and fixed in position and aluminium anodised grill, square, ractangular or similar section fixed with channel of size 38x12x13mm complete all as specified and directed.

S&F in replacement curtain rod 20mm dia mild steel, chromium plated fancy type with fixing brackets and knobs at both ends complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M & L for rendering 5mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of suitable primer over and including 1-2mm thick layer of wall putty to obtain even/smooth surface using sand paper complete all specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of suitable primer over and including 1-2mm thick layer of wall putty to obtain even/smooth surface using sand paper complete all specified and directed.

M & L for preparation of previously treated plastered surfaces of walls and applying two coats of oil bound distemper complete all specified and directed.

M&L for preparation of old treated surfaces of wall and applying two coats of cement base paint white or tinted all as specified and directed.

Dismantling wooden boarding, any description, fixed in any position with nails all as specified and directed.

S&F 20mm thick wooden boarding clean swan as in eaves board, fixed in any position with nails all as specified and directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S & F butt hinges medium weight 50mm size colled rolled mild steel complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished complete all as specified and directed.

S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in complete all as specified and directed.

Dismantling of timber scantlings 40 sqcm and over in section, in any position unframed work complete all as specified.

M&L for second class soft wood in scantlings clean swan fixed in frame work complete all as specified.

Dismantling wall, ceiling and floor boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 2nd class soft wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads sectional area exc 13 but n. exc 25 Sqcm complete all as specified and directed.

S&F 2nd class soft wood plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or brads sectional area exc 6 but n. exc 13 Sqcm complete all as specified and directed.

S&F 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame-work complete all as specified and directed.

S&F 6mm thick veneered decorative plywood, grade 1, (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame-work complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/eaves board fixed with self tapping screws complete all as specified and directed.

Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.

M&L for 75mm thick PCC (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in sub base/levelling course for footpath complete all as specified.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, polished, area of each tiles exc 0.42sqm and not exceeding 1.0sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:4 complete all specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:4 complete all specified and directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:6 complete all specified and directed.

M&L for coloured glazed ceramic tiles on vertical surface as in dado, skirting etc of size 350x250x7mm/ 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile fixed over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement and filling joints with bitumastic filling in proporation bitumen and coarse sand mixture. 1:2 complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cmx30cmx22-25mm thick,with white cement and pigments set, jointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded in any mortar complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over and including 15mm thick bedding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F 15mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144Kg/cum conforming to IS-9842 provided with 0.01mm aluminium foil complete all specified and directed.

Lagging to pipes internal dia 20mm used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144Kg/cum conforming to IS-9842 provided with 0.01mm aluminium foil complete all specified and directed.

S&F in repair plate rack made of stainless steel sheet 1.00mm thick of size 750mmx 600mmx 300 mm with steel shelves and hanging arrangments for utensil, complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainles steel sheet 1.0 mm thick kitchen or laboratory with plugs washers and waste pipes, including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F wall mounted bathroom PVC cabinet with mirror of size 14"x18"x4" (inch) complete all as specified and directed.

S&F in repair corner glass shelf of size 300mm with brass brackets complete all as specified and directed. Make: Prayag Cat No. BEA-44 or tecnocommercially equivalent make in Cera, Jaquar etc

S&F in repair glass shelf of size 500x60mm with ABS brackets complete all as specified and directed. Make: Prayag Cat No. BEA-47 or tecnocommercially equivalent make in Cera, Jaquar etc

S&F in repair CP wall mixer 3-in-1 including over head and hand shower complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 'D' type, 600mm long between flanges complete all as specified and directed.

S&F in repair brass chromium plated shower rose, 125mm size with or without swivel joints including fixing to 15mm bore steel pipe or union complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm bore stop valves or angle valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, size 550 x 400mm (flat back) including brackets cutting for and pinning in ends of brackets including 32mm bore waste fittings, brass, chromium plated and PVC waste pipe complete all as specified.

S&F in repairs 15mm bore Brass CP single lever basin mixer with double action for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair CP towel ring fixed with and including chromium plated brass screw and wooden/plastic cleats complete all as specified and directed. Make: Prayag Cat No. BA-21 or tecnocommercially equivalent make in Cera, Jaquar etc

S&F in repair of vitreous china squatting pan ‘Orissa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve, float handle, including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.

S&F 450mm long (PVC connection) 15 mm bore with PTMT nut complete all as specified and directed.

S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball 20mm dia all as specified in SSR Part-I including dismantling old unserviceable water tanks complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:3) on faces of sunken portion mixed with and including water proofing compound Dr Fixit pidiproof LW+ or equivalent @ 200ml/50kg of cement complete all as specified and directed.

M&L for applying two coats of flexible polymer water proofing coating 1.0mm thick (Dry film in two coats) using Dr Fixit pidifin 2K of M/s Pidilite Industries or equivalent including necessary pond testing for 48 hrs in sunken portion complete all as specified and directed.

M&L for treatment to sunken slab complete all as specified and directed as under :- (a) Preparation of surfaces and applying one coat of bituminous primer @ 0.50 Ltr/sqm (b) Applying hot blown cutback bitumen @ 0.70 kg/sqm (c) Providing and laying APP membrane 3mm thick of weight not less than 3kg /sqm with min 15cm over lap

M&L for PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in sunken floor finished even and fai complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub bas of floor of wc/bath/toilet finished even and smooth without using extra cement mixed with and including water proofing compound Dr Fixit pidiproof LW+ or equivalent @ 200ml/50kg of cement complete all as specified and directed.

Demolition and breaking up drain pipes 150mm dia (salt glazed ware, AC or reinforced concrete) jointed in cement mortar and taking out of trenches or wall if required, complete all as specified and directed.

S&F reinforced concrete pipes of 150mm bore class NP-2 laid in trenches and jointed with collars complete all as specified and directed

M&L for concrete bed to drain pipe in PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipe complete all as specified and directed.

M&L for Precast RCC 1:2:4 (nominal mix) type B-1 (using 20 mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces with and including necessary form work complete and seting with cement mortar (1:4) complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

S&F in replair CP soap dish with glass, heavy duty, fixed with chromium plated brass screws, complete all as specified and directed. Make: Prayag Cat No. BA-25G or tecnocommercially equivalent make in Cera, Jaquar etc

S&F in repair toilet paper holder, vitreous china, coloured, box type fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

Taking down carefully existing old burn out/unserviceable copper/aluminium point wiring any type (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing old materials tfrom site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 1.5 Sqmm (Nominal area) drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all connected fittings accessories including providing of molded type/size of pressed steel terminal sunken boxes 1.2 mm thick or PVC flush type box and dully fixed it concealed on wall or surface on wall and covered to top with electro plated 3mm thick plastic laminated sheet for housing/mounting of switches, sockets, regulators etc and also providing 1.5sqmm PVC insulated FRLS wire, 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as a continuous earth wire complete and including making good all disturbed surfaces to match the existing surface of wall/floor/ceiling etc. all as specified and directed for following:-

One light/fan point controlled by one switch of one way point wiring system

One 3/5 pin socket outlet, 5 Amps on same board controlled by one way switch

One 3/5 pin socket outlet point, 5 Amps on independent board controlled by one way switch

Two way point controlled by two way switch point wiring system

One bell point controlled by one bell push switch of one way point wiring system

All as per Sl item No.105 above but using single runs of PVC insulated FRLS wire, 1100volt grade with multistranded copper conductor wire of size 2.5 Sqmm (Nominal area) power point wiring system with controlled by one way switch fixed on independent board and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed

S&F switch piano flush type 5/6 Amps one way complete as specified and directed.

S&F socket outlet 5/6 Amps, two in one 3/5 pin complete as specified and directed.

S&F switch piano flush type 15/16 Amps one way complete as specified and directed.

S&F socket outlet 15/16 Amps, 5/6 pin complete as specified and directed.

S&F bell push flush type single pole one way of 5/6 Amps complete as specified and directed.

S&F bell Ding Dong type 220 Volts AC single pole complete as specified and directed.

S&F ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed.

S&F step type electronic fan regulator with hum free step alongwith speed control knowb complete all as specified and as directed.

S & F in replacement LED tube light fitting 1 x 20W/ 22W, 220V AC decorative box type with eletronic driver, holder including LED tube light with having energy efficient including providing of suitable type of flat fexible cable for electric connection complete all as specified and directed.

S & F in replacement LED mirror light fitting with high output diffuser 2' long, 1x10W, 220V AC decorative type with eletronic driver, holder including LED lamp with having energy efficient including providing of suitable type of flat fexible cable for electric connection complete all as specified and directed.

S & F angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb complete all as specified and directed .

S & F surface wall mounted decorative bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adhaptor suitable for 7.5/9W LED filament lamp E-27 base including providing of 1Nx9W LED lamp use in both warm/white type colour complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection all as specified and directed.

S&F surface mounted LED bulk head luminaries light fitting of rated capacity 10W including LED lamp & driver, out door type with dust and water proof, energy efficient for ready to use and required in both warm/white type colour fixture complete including dully fixed on bldg wall surface including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed.

S & F environmental friendly LED street light fitting of rated capacity 35W 230 volt AC with having LED driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, out door type, having IP 65/66 protection made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia or as recommended by manufacturer GI pipe light grade bracket and it to match/setting the new fitting fixture hole attachment system of suitable bracket length make to shape / bend including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed.

S&F ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall and fixing compete with nut, bolt etc all as specified and directed.

S & F in replacement sheet metal enclosure duly powder coated with double pole and neutral enclosure with having a two pin and earth plug socket base & metal plug top and having mounting channel with one MCB SPN 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface all as required at site complete all as specified and as directed.

S&F in replacement sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of rating of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415volt, 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base channel and blanking plates suitable for holding of main MCCB as incommer and outgoing MCB complete system alongwith providing and mounting in side of DB box 01 Nos MCCB TP 160 Amps with breaking capacity 25 KA having adjustable setting & adjustable magnetic type and also providing of 8 Nos MCB SP 63Amps 10 KA 'C' curve same as per make of distribution board and also making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and as directed.

S&F in replacement sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of rating of size/type of distribution board of rating SPN 12 way type 220 volt AC supply system with IP-43 protection rating and having neutral and earth link bus bar mounting base channel for holding MCBs incommer and outgoing complete set and also making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and as directed.

S&F MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

M&L for sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2x10Sqmm and one run of 1x10 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old sub main wiring and making good the disturbed wall surface complete all as specified and as directed. Note:- 3 runs of 10sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 50 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed.

Excavation in trenches/under road/PCC path/ hard standing not exc. 1.5 m wide and n. exc. 1.5m depth for laying cable/pipe etc in soft/loose soil and getting out complete all as specified and directed.

M&L for sand cushioning for under ground cable provided with a layers of sand before laying cable and sand after laying and stretching the cable complete all as specified and directed.(Punned thickness shall be measured)

M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat acomplete all as specified and directed.

Returning filling in including, spreading, leveling and well ramming in layers not exceeds 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Supply and laying GI pipe 40mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe on pole/wall in proper size of clamps, nut bolt and washer etc complete all as specified and directed.

M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed.

M&L for taking down carefully existing ceiling/exhaust fan and geyser any type and capacity and removing fan blade and body parts and cleaning all dust and filling cavities with filler material, oiling, greasing including painting fan with blade and geyser complete body by applying two coats of synthetic enamel paint and assemble the same alongwith all connecting & fixing accessories such as rubber reel, nut, bolt, washer, lock pin, clamp etc and hanging and refixing the same in position with providing nut, bolt and washer etc and making electric connection complete all as specified and directed.

GHULAM NABI GILKAR AND CO (BID ID -3138820)

M/S Ghulam Mohammad Shalla (BID ID -3141392)

M/S PARVEZ AHMAD LONE (BID ID -3148013)

M/S SHIMAR STAR GLACIER (BID ID -3148242)

M/S Vivek Gupta and Co (BID ID -3147738)

M/S SK ATLANTIC ENTERPRISES (BID ID -3140974)

M/S AIJAZ ENTERPRISES (BID ID -3147811)