PROVN OF BATHROOM CUM TOILET AT BLDG NO T192 SINGLE JCOs ACCN SEPTIC TANK BEHIND JCO MESS P24A HARDSTANDING BETWEEN BLDG NO T06 AND T09 BOUNDARY WALL IN FRONT OF BLDG NO P305 JCO CLUB WASHING POINT AND VEHICLE INSPECTION RAMP FOR MT GUARDROOM NEAR

Amount

Surface excavation n.exc 30cm deep and averaging 15.00cm deep and getting out in soft/loose soil omplete all as specified and as directed.

Excavation over area, n. exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed.

Excavation over area, exc 1.5m but n. exc 3.0m in depth and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits, man holes, laying of cable etc not exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and as directed.

Excavation in trenches exc 1.50 m deep and each additional 1.5m or part thereof in depth beyond the first 1.5 m and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

M&L for hardcore of broken or boulders of gauge exc. 63 mm but n exc.100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

M & L for PCC 1:5:10, type E2, (using 40 mm grade stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M & L for PCC 1:4:8, type D2, (using 40 mm grade stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M & L for PCC 1:3:6, type C2, (using 40 mm grade stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M & L for PCC 1:2:4, type B1, (using 20 mm grade stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in coping / benching etc including necessary form work complete all as specified and as directed.

M & L Precast RCC 1:2:4 Type B-1 ( Using 20mm graded stone aggregate) as in landings, cover slabs ( for manhole etc) chullah hoods, chajjas , water toughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in surface channel, and drain complete all as specified and as directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed.

M&L for RCC 1:1½:3 type A1 (20mm graded stone aggregate) nominal mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.

M&L for RCC 1:1½:3 type A1 (20mm graded stone aggregate) nominal mix as in Slabs supported on walls beams and columns in floors,roofs,landings, balconies,canopies,deck slabs and in shelves and the like etc complete all as specified as directed.

M&L for RCC 1:1½:3 type A1 (20mm graded stone aggregate) nominal mix as in beams, seismic bands, cantilevers, bressumers and lintels complete all as specified as directed.

M&L for RCC 1:1½:3 type A1 (20mm graded stone aggregate) nominal mix as in Columns, pillars, piers, posts and struts etc.complete all as specified as directed.

M&L for RCC 1:1½:3 type A1 (20mm graded stone aggregate) nominal mix as in chajjahs complete all as specified as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) complete all as specified as directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified as directed.

S&F mild steel Fe-410-W (Gde-E-250) quality B framed work such as in doors or gates using angle or other sections with gusset plates, rails, braces etc complete, drilled for and including steel sheeting or covering as required. Doors etc to be prepared for hanging or sliding with ornamental design and including hooks and hinges of steel for hanging door and other fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed.

S&F mild steel Framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors, double rebates incl necessary fixing lugs, 06 Nos 100mm size stainless steel (03 Nos for each shutter), lock strike plate, filling the hollow portions of steel frame with and including PCC 1:3:6 type C-0 (12.5 graded stone aggregate) etc. complete all as specifed and as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.

S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F of steel windows with side hung shutters glazed shutter including both side openable (out side glazed window and inside fly proof window) including projecting type hinges with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded including taking down the old window complete all as specified and as directed. Note: Guard bar or square bar shall be measure and paid separately.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

Supply & Fixed frosted glass 4 mm thick ordinery quality and glazing with oil putty in sqaure n exc 0.50 sq. m in each pane complete all as specified and as directed.

S & F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed.

S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix steel helical door spring 300 mm size rat tail rod pattern spring, including roller and roller plate complete all as specified and as directed.

S&F 150 mm long extruded anodized aluminum alloy handles, fabricated type, etc complete all as specified and as directed.

S&F 100 mm long extruded anodized aluminum alloy handles, fabricated type, etc complete and as directed.

S&F powder coated aluminium alloy curtain rails 20mm dia with brackets fixed to required lenghts etc complete all as specified and as directed.

S & F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base for path /paving/ hard standing/ floor etc. complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of floor complete all as specifed and as directed.

M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregates) as in flooring/ path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

S&F 3mm thick 38mm width glass dividing strip inserted in position conform to design complete all as specified and directed.

M&L for Finishing the top surface of concrete by brooming while the concrete is green complete all as specified and as directed.

M&L for broken glass coping on top of walls in cement mortar 1:3 complete all as specified and as directed.

M & L for forming 12 mm thick expansion joints 100 mm thick concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade `A' complete all as specified and as directed.

M & L for forming contraction (dummy) joints 65mm deep x10mm wide, filled with sealing compound Grade 'A' complete all as specified and as directed.

S&F Salt glazed stoneware drain pipes 150 mm bore laid in trenches and jointed complete all as specified and directed.

M/L PCC 1:3:6 type C-2 ( 40mm graded aggregate) as in concrete bed to drain pipe 150 mm dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Cutting into existing manhole for connecting new drain pipe of any size making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc complete all as specified and directed.

M&L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L for glazed light coloured/printed ceramic tiles 300x200x6 to 7mm/ 350x250x6 to 7mm /450x350x6 to 7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), to fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), to fair faces of brick or concrete wall surfaces, mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. (Note : Water proofing compound to be measured and paid separately as "Supply only".)

M&L for 15mm thick rendering in cement mortar (1:6), to fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound to be measured and paid separately as "Supply only".

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of weather coat paint over one coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old decorated surface of walls and applying one coat of weather coat paint complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as specified and as directed.

M&L of newly plastered surface of wall and applying two coats of cement based paint over one coat of alkali resitant primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F GI tubing 15 mm bore, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases in brick masonry walls built in cement mortor for concealed water tubing or concealed conduit wiring, etc., and making good in CM 1:3, cutting not exc 10 cm girth etc complete all as specified as directed.

S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

S&F bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S & F stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F stop valves, 15 mm dia cast copper alloy, chromium plated, two way angle cocks, concealed type long body with round operating knob screwed down high pressure with screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F of 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F of 125 mm, dia chromium plated, swivel type shower rose suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

S&F in repair tubular towel ring with brass chromium plated brackets fixed with screws and wooden/plastic cleats etc. complete all as specified and directed.

S&F of fancy type Brass chromium plated 600mm long Towel Rail fixed with screws and wooden/plastic cleats etc. complete all as specified and directed.

S&F of 15 mm dia 450 mm long PVC connection pipe with two PTMT nuts at each ends with rubber washer complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S & F 75mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S&F 100mm bore Cast iron spun pipe soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall.complete all as specified and directed.

S&F 75mm bore Cast iron spun pipe soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed.

S&F CI Bends 100 mm bore (any radius), diminishing pieces or tapers ( larger bore measured) complete all as specified and as directed.

S&F CI Bends 75 mm bore (any radius), diminishing pieces or tapers ( larger bore measured) complete all as specified and as directed.

M&L for CI Branch pieces, 100 mm bore single ( equal or unequal), ordinary or inverted ( spigot or socket type) or with parallel branches complete all as specified and as directed.

M&L for CI Branch pieces, 75 mm bore single ( equal or unequal), ordinary or inverted ( spigot or socket type) or with parallel branches complete all as specified and as directed.

M&L for CI Cowl, 100 mm bore complete all as specified and as directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm/100mm dia bore of pipe complete all as specified and as directed.

S&F Cast iron Nahani trap with diameter of outlet 100mm with grating including jointing to waste pipe fixed with cement concrete (1:2:4) type B-1 etc. complete all as specified and as directed.

S&F Cast iron Nahani trap with diameter of outlet 75mm with grating including jointing to waste pipe fixed with cement concrete (1:2:4) type B-1 etc. complete all as specified and as directed.

S&F Cast iron floor trap 50mm dia with grating including jointing to waste pipe fixed in cement concrete type B-I ( 1:2:4) complete all as specified & as directed.

S & F of salt glazed stoneware gully traps, square or round mouthed, type "P" 125/100, setting and jointed wit CM 1:1 complete all as specified and as directed.

S & F of Vitreous China Squatting Pan "Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. (excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S & F of vitreous china, wash hand basin, white, flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed

S&F Vitreous china urinal, half stall white (excluding flushing cisterrn) including urinal spreader, PVC connection, 40mm PVC waste pipe & 40mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe ( Minimum weight -60 gms) complete all as specified and as directed.

S&F 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F fancy type soap dish chromium plated fixed to wall with chromium plated brass screws and plastic cleats complete all as specified and as directed.

M & L for water proofing treatment with hyperplas fiber 3 kgs/sqm APP polymeric membrane of 3mm thick reinforced with polystar non woven fabric (wt not less than 150 gm/Sqm) including coating the surface with water based bituminous primer @0.70 sqm/ltr, blown bitumen 85/25 or 90/15 at 1.20 kgs/sqm , both at top and bottom of the membrane over rendering 10 mm 1:3 plaster with and including WPC and finally finished with one coat of bituminous aluminium paint @ 100gms / sqm complete all as specified and as directed.

M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

Supplying, laying & testing 100 mm dia ductile iron pressure pipe socket and spigot end, class K-7, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for push-on - joint with inside cement mortar lining, internal metallic zinc coating and external black bitumen coating duly ISI marked laid in trenches including making good disturbed surfaces of road /pavement/PCC surface as required including taking out old existing pipeline of any description and size complete all as specified and as directed.

S&F GI tubing 50 mm bore, medium grade with all fittings and fixed complete laid in trenches including taking out old existing pipeline of any description and size complete all as specified and as directed.

S&F GI tubing 20 mm bore, medium grade with all fittings and fixed complete laid in trenches including taking out old existing pipeline of any description and size complete all as specified and as directed.

S&F GI tubing 20 mm bore, medium grade with all fittings and fixed complete to wall, ceiling including taking out old existing pipeline of any description and size complete all as specified and as directed.

M&L for Ductile iron (DI) fittings 100 mm to 450 mm bore for spigot and socketed pipes such as bends (any type radius and angle), tappers any type (straight, bend, increasing, decreasing or double socket type etc), tee pieces, single branch, Y junction, double branch, cross (all sockets or socket and spigot etc), collars, caps & plugs etc. conforming to IS 9523 complete all as specified and as directed.

S&F in repair 50mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repair 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F 100 mm bore cast iron flanged & drilled both ends Sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & Stainless Steel spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing including taking out old unserviceable sluice valve from any position complete all as specified & directed.

S&F in repair Straight plain brass ferrules 25mm (or connecting screws) screwed both ends and fixed complete all as specified and as directed.

Cutting the existing road of 3.65 m wide and pathway as per site requirement for laying various size of DI pipe under the road and making good distrubed surface as per existing road/ pavement/ PCC surface complete all as specified and as directed.

M&L for construction of brick masonry valve pit of size 60 cmx 60 cm x 60 cm (internal dimension) one brick thick wall built in CM (1:4) on 100mm thick PCC (1:4:8) type D2, (nominal mix) as in foundation, and 15mm thick rendering in cement mortar (1:4) both externally and internally, external plaster shall be up to 15cm below GL, providing valve pit cover made of 3.15mm thick MS sheet/plate, including provision of hinges, handle and locking arrangement including40X40X 6mm angle iron frame fixed on top of valve pit by means of MS hold fast 40x6mm and 150mm long, embedded in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) block of size 230X200X100mm, including two coats of anti-corrosive paint over a coat of red oxide zinc Chrome primer and necessary earth work in soft/loose soil including demolition of old valve pitcomplete all as specified & directed.

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (including connecting to earth dolly) laid/fixed in and including concealed in PVC rigid conduit on walls/ceiling, and also including sunk type pressed steel terminal box made out of galvanised iron sheet thickness not less than 1mm and 3 mm thick plastic laminated sheet top covers for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed.

All as per item serial No 177 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches

All as per item serial No 177 here-in-before but One socket outlet 3 pin 5 Amp on independent board.

All as per item serial No 177 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable.

S&F switch piano, flush type single pole one way 5 Amps 230 volt complete all as directed.

S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed.

S&F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as directed.

S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as directed.

S&F ceiling rose surface bakelite 65x50mm three terminal complete all as directed.

S&F lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as directed

S&F stepped type electronic fan regulator, two module size, flush type complete all as directed.

S&F of wall decorative fixtures in durable plastic body and designer mesh in gold finish suitable for 9 W LED lamp of B-22 including lamp of 9 W complete all as specified and directed. (Make : Havells Cat No. LHFOECE1TZ1B014 or in equivalent of Bajaj / CG / Philips)

S&F of LED box type fitting pre-wired including LED tube 1x10W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable and fix on 2 no of PVC block ccomplete as specified and directed. (Make:- Jaguar Model No. LGLZ01X010XC/ LGLZ01X010XN/LGLZ01X010XW or Havells Model No. LUMILINEPLUSBS10WLED865SPCSS or equivalent model of make Philips /GE/Crompton)

S&F of regal batten for LED Tube rod pre-wired including LED tube double sided 1x20W connecting up with aluminium housing and sheathed 1100 volt grade flexible copper cable & fix on 2 no. of PVC block complete all as directed. (Make: Havells Model:REGALBATTENT8UPTO1X22WDSBSWH+CRSTAL1213T8DSTL20WLED865SGLASS or equivalent model of make Bajaj/ Philips /GE/Crompton)

S&F of SPN DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed. (Make :- Legrand Cat No 5076 11 or equivalent model in Siemens / Schneider)

S&F of factory made, sheet steel distribution boards, TPN, 4 Way, double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. (Make :- Legrand 5076 70/ Siemens/Schnider/L&T)

S&F of MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Model 4085 90 to 95 orequivalent model in Siemens / Schneider/L&T

S&F of MCBs, SPN 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Model 4086 09 to 17 or equivalent model in Siemens / Schneider/L&T

S&F of MCB TPN 40 to 63 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified. (Make :- Legrand 4086 81-83 / Siemens/Schnider)

S&F ceiling fan complete with blades, down rod, electronic regulator and accessories, 230 V , 1200mm sweep with minmum air delievery 210CFM with service value 6.00 BEE five star rated with bushless direct current motor ( BLDC) complete all as specified and directed. (Make Usha/Havells/ Orient)

S&F Exhaust fans AC single phase 230/ 240 V of size 230 mm sweep with louver shutter with frame and necessary fixing accessories , writing MES No. with black synthetic enamel paint 2 cm high in letter complete with necessary connection up including provision of three core copper flexible cable with flexible wire cover of plastic white in color and connection from ceiling rose to exhaust fan terminal etc complete all as specified and as directed. (Make:-Usha, Model-230 MM Aeroclean LD Exhaust or equivalent make in Crompton, Bajaj)

S&F Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver shutter with frame and necessary fixing accessories , writing MES No. with black synthetic enamel paint 2 cm high in letter complete with necessary connection up including provision of three core copper flexible cable with flexible wire cover of plastic white in color and connection from ceiling rose to exhaust fan terminal etc complete all as specified and as directed. (Make:-Usha, Model: 300 MM Aeroclean LD Exhaust or equivalent make in Crompton, Bajaj)

S & F thermoplastic (Polycarbonate) junction box for test point without terminal block of dimension 130x180x77mm IP 66 halogen free and weather proof including four hexagonal anticorrosive screws for outdoor installation complete all as specified and as directed. (Make : Hensel Cat Part No. DK 0600 G or equivalent in Syntex)

S & F of bollard 15W fittings including LED lamp with opal acrylic diffuser with IP-65 protection, 80mm height of pole complete all as specified and as directed. (Make : Magc Cat Part No. OGFAOOOO or equivalent Havells/ Bajaj / Phillips)

M&L LED building secruity luminaries 48 Watts WSPD epoxy powder coated pressure die cast aluminum housing with wheatherproof gasket for LED's and control gear compartments, pressure die cast aluminium frame with heat resistant toughened clear glass fixed with SS screws LED Specification: CREE LED/Equivalent, Colour temp - 5700 K +/- 300 K Lens,,IP-66,Lumen efficiancy >100 lm/w,surge protection 4kv internal (Built-in) with twin core conductor complete all as directed including testing on completion. (Make: Havells CAT No. ENDURAPEARNEOSL48WLED757SASYTOPC or equivalent of Philips/Wipro/CG)

M&L for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 Sqmm 4.0 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 Sqmm 3.0 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 Sqmm 2.0 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)

M&L for Sub class ‘B’ old size well burnt brick laid flat in trenches over the cable for protection of LT cable complete all as specified and as directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

PRITHWI BUILDERS

MAC ENGINEERS