Construction of Pavillion at Gole Gujral,Tallab Tillo Jammu

Amount

Earthwork in all kinds of soil excavation by manual means over areas (Exceeding 30cm and upto 1.5 Mtr in depth, 1.5 M in width as well as 10 sqm on plan) including disposal of excavated earth upto 50 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed (50% all kind of soils, 20% ordinary rock and 30% hard rock (Blastic Prohibited).

Extra for every additional lift of 1.5 M or part therefore in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed.

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 upto plinth level in cement mortar 1:4 (1 cement : 4 fine sand).

Providing and laying DPC 50mm thick in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size crusher aggregate).

Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in cement mortar 1:6 (1 cement : 6 fine sand). In superstructure

Half brick masonry with bricks of class designation 75 in foundation, plinth and superstructure upto floor V-level in cement mortar 1:4 (1 cement : 4 coarse sand).

Providing and laying Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) in suspended floors, balconies, landings and staircases having 15 degree slope. upto floor five level excluding the cost of centering and shuttering.

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Foundations, footings, bases of columns.

Suspended floors, roofs, landings, balconies and access platforms.

Columns, pillars, piers, abutments, posts and struts.

Edges of slabs and breaks in floors and walls upto 20cm wide.

Retaining walls, return walls, wall (any thickness) including attached pilasters, buttresses, plinth and string courses fillets etc.

Weather shade, chajjas, corbels etc. including edges.

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.

RBM filling in layers not excedding 20mm and consolidaling with power head roller incl.all leads, lifts carriages and all form of taxes.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40mm nominal size) in R/Wall/Return Wall, columns etc. excluding the cost of centering and shuttering, all works upto floor V level.

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars.

Kota stone slab flooring over 20mm (avg.) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) 25mm thick.

Kota stone slab 25mm thick in riser of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineerin- Charge)0.50mm+/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

6mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).

15mm cement plaster on the rough side of single or half brick wall of mix in 1:6 (1 cement : 6 fine sand).

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand).

Providing and laying glossy finished full-body vitrified premium quality floor tiles of 60x60cm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make of Somany, Kajaria, NITCO and Orient make in colours and shade Ethnic-Berlinetta White, Crown White, Dacia White, Dacia Green, Dacia Pink, Dacia Ivory, Dacia Grey, Dacia Brown, Dacia Pearl, Dezzling White, Evalia, S&P Grey, S&P Brown, Ultra White, Haze Grey and Border of Royale- Crown Mint, Crown Pink, Crown Snow, Micra Brown and Radiant- Lawrence Gold, Lawrence Bianco, Lawrence Grigio, Lawernce Moka, Lawrence Jaisalmer, Nuvro Brown, Nuvaro Mocha, Nuvaro Grey, Nauvaro Nero, Nuvaro Crema, Nuvaro Bianco, Nuvaro Beige laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with matching Epoxy etc. complete.

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skirting, risers of steps and dodos over 12mm thick bed of cement mortar 1:3 (1cement : 3coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ceramic glazed floor tiles (non-skidding) 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming to IS : 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.

Supply fabrication including erection at all heights and lifts and keeping in accurate position of structural steelwork including sand blasting wherever required to fine grade & applying one shop coat of Epoxy primer of 35 microns thickness including assembling & erection of the fabricated steel work by bolting with (M.S, High Tension & High Steel Friction Grid bolts) and site welding. Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer-In-Charge and incorporation of Engineer-In-Charge's comments on same. Applying two coats of insitu Epoxy finishing paint of 30 micron thickness per coat on unencased structural parts and MS hollow sections only (Epoxy paint shall be not paid separately). The shop coat of Epoxy primer is not required in the small areas of site-joints with HSFG bolts / site-welds including M.S. inserts (e.g. Foundation bolts with pipe - sleeves, lugged plate/ angle surface inserts, through pipe inserts etc. ) as per drawings and direction of Engineer-In-Charge. Using M.S. Structural steel sections like ISMB, Angle, Channel, MS Plates etc. conforming to IS 808-1957, IS : 2062 of grade 350 YST Wide parallel flange beams as per IS : 12778 approved for space frame i/c high strength nuts & bolts.

Providing and fixing of Floor (Riser) Mounted Stadium seats HDPE Hot blow moulding UV resistance in appropriate colour Chair of size 420mmx450mmx310mm. With back fram of Aluminium Alloy complete all respect. approved by competent authority.

Extra for providing edge moulding to 18mm thick Granite stone counters, Vanities etc. over item No. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry, but excluding the coat of nosing of steps etc. complete 50mm thick with 20mm nominal size of stone aggregate.

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer.

Finishing walls with premium Acrylic smooth exterior paint with silicon additives of required shade on new work ( two or more coat applied @ 1.43 litre/ 10sqm over and including base coat of water proofing cement paint applied @ 2.20Kg/10sqm

Providing and fixing powder coated 50 microns aluminim work (10gauge) for doors, windows, ventilators and partitions with extruded built up standard tubular sectond / appropriate Z sections and other sections of approved make conforming to IS: 733 and 1285, fixed with rawl plugs and screws or with fixing clips , or with expansion hold fasteners including necessary filling up of gaps at junctions , at top ,bottom,rust free, straight , metered and jointed mechanically wherever required including cleat angle, alumium snap beading for glazing/ paneling, C.P brass / stainless steel screws, all complete as per architectural deawing and the directions of engineer-in charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc. with PVC / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). With glass panes of 5.50 mm thickness (weight not less than 13.75 kg/sqm).

Providing and fixing in position HDPE pipes and required accessories of outer/inner diameters conforming to IS : 14333-1996 and bearing ISI mark for soil, waste, rain water, vents etc including all fittings with or without access of any degree i.e. bends, traps, tees, junctions, cowls, offsets, access pieces, holder bats, structural steel fabricated supports, clamps for suspended pipes in ceiling, stays, through ducts and other required accessories as per site condition etc and jointing materials, chemicals, labour required for cutting holes in walls and floors handling and making joints etc. including hydraulic testing of pipes, refilling of trenches etc. complete job and as per direction of Engineer-in-charge.(make Supreme or Jain or Astral)

110mm dia SN-8

160mm dia SN-8

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS:6315 marked for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge with brass cover plate.

providing and installing water pump of 1 hp capactiy of kirloskar chromption greaces od equivalents along with all necessary fittings and connections.

Providing and laying in position cement concrete of 1:3:6 grade (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of m-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand filling the joints with coarse sand etc . all complete as per dirction of engineer –in-charge

15mm cement plaster with floating coat of neat cement concrete on single and half brick masonry below plinth level and upto floor 5th level including all leads lifts and all form of taxes complete . In mix : 1:4 cement

Providing and laying at or near ground level factory made kerb stone of m25 grade mix cement in position of required line all complete .

Carriage of material by mechanical transport in all terrains including cost of loading/ unloading and stacking at site.

Stone aggregate below 40mm size for an average lead of 8Kms.

Sand for an average lead of 8 Kms .

Bricks for an average lead of 8 Kms .

Stone aggregate below 40mm size for an average lead of 8Kms.

Providing & fixing of white vitreous China pedestal type water closet (European Type) with cistern (A/PHAS-100 +Cat No. 201100 + Cat No. 21054) with CP bolts, nuts, CI chair hanging arrangements, bakelite seat & cover with CP hinges & rubber buffers, CP brass screw, washer with all accessories with WC connector with Rubber Lip / Buffer and side gap filled with silicon sealant wherever required. Including brass / SS screws and washer complete including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-in-charge.

Providing & fixing of white vitreous China under counter oval wash basin / circular basin (Hindware 10080) with CP brass waste assembly, CP cast brass bottle trap with extension piece (Jaquar Cat No. 769B + Parko1535 or approved equivalent), 450mm long CP copper connections pipes (Jaquar Cat No. 803B or Parko 1535 or approved equivalent), wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-in-charge.

providing and fixing pedestral for wash basin

Providing and fixing of white vitreous china wash basin with pedestal (Hindware Cat No. 1008 + Pedestal Cat No. 11003) with CP brass waste assembly, CP cast brass bottle trap with extension piece (Jaquar Cat No. 769B+Parko 1535 or approved equivalent), 450mm long CP copper connections pipes (Jaquar Cat No. 803B or Parko 1535 or approved equivalent), wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-in-charge.

Providing and fixing CP single liver extended basin mixer (height 85mm) without Popup waste system with 450mm long Braided Hoses and brass nuts with all fittings and accessories as per direction of Engineer-in-charge (Jaquar FUS 290238).

Providing & fixing white vitreous china flat back urinal with automatic flushing systems (Hindware 60021) comprising of all plumbing, electronic and electrical items, CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, infrared photo cells, eyes, electrically operated solenoid valve, step down transformer, equipment and any other item required to provide satisfactory functioning including necessary wall cutting/ chasing and making good, as required for urinal flushing complete as mentioned above as per direction of Engineer-Incharge.

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 a) 15mm nominal bore (Make Jaquar FUS 29053).

Providing and fixing C.P brass robe hook (Jaquar Cat No. CAN 1191N) or approved equivalent) fixed to wall / door with plastic rawl plugs and C.P brass screws including cutting and making good the walls wherever required as per direction of Engineer-in-charge.

Providing and fixing recessed liquid soap dispenser with glass bottle (Jaquar Cat No. ACN 1135 N) as per direction of Engineer-in-charge.

Providing and fixing of Soap Dish Holder with all fittings as per direction of Engineer-in-charge (Jaquar Cat No. ACN 113 N).

Providing and fixing of Tumbler Holder with all fittings as per direction of Engineer-in-charge (Jaquar Cat ACN 114 N)

Providing and fixing 6mm copper backed float glass mirror MODI / SAINT-GOBAIN including 6mm thick BWR type ply board, 40mm stainless steel channel plugged to wall, hard wood treated with two coats of wood preservative etc. all complete as specified and shown in drawing complete to the satisfaction of Engineer-in-charge.

Providing and fixing brass towel Ring Round with Round Flenge of approved make complete with all fittings (Jaquar Cat No. ACN 11021 BN).

Internal work:- Exposed on wall Providing and fixing of Polyethylene/Aluminum/Polyethylene (PE-AL-PE) composite Pipes as per IAPMO IGC-INDIA 308, UMC-1 TM certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer's name or trade mark including all relevant DZR brass fittings as Female Elbows/Tees, MTC/FTC and Engineering plastic fittings with internal sealing system like Eq. elbows, Eq. tees, reducers, Straight couplers, Connectors, with PAP valves etc. Trenching, re filling and testing etc. Complete as per Engineer In Charge. Make Kitec, Maithilee and Vista.

1620 (20mm OD) pipe

2025 (25mm OD) pipe

2532 (32mm OD) pipe

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license) (1000 ltr. Capacity 15 No.).

chamanlal

Jai Singh Manhas

Varun Pandoh

Mahesh Kumar