GE(S) BTD TOKEN NO 92 OF 2023-24 PROVISION OF CERTAIN SPECIAL REPAIR AND REVENUE WORKS UNDER AGE BR II AND AGE EM IV UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as directed.

M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with complete all as specified and directed.

S&F150mm aluminium handles, oval type, stove enemeled black complete all as specified and directed.

S&F 300mm long aluminium sliding doors bolts, plate type, stove enameled black bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.

S&F Solid PVC Door Frame as in bathroom, toilet, cupboard and kitchen cabinate of size 50mm x 47mm made out of 5mm prelaminated PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter as in bathroom, toilet, cupboard and kitchen cabinate,(With particle board) 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing extruded aluminium anodised 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed.

S&F aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed.

Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

All as per Srl item No 14 above but ventilators top hung.

Powder coated Anodised aluminium window and ventilator shutters,glazed/guazed side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches , pillars etc. complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:4) using old size bricks complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 but except bricks (old serviceable bricks to be used) complete all as specified. Note : The rate includes for cleaning of old bricks complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.

Supply only of Liquid water proofing compound of approved make complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and complete all as specified and directed.

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Demolition of cement concrete (re-inforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, fins, facia and Chajjas in double story bldg including scafolding for repair etc and the like, including form work complete all as specified and as directed .

M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including backing coat of 10 mm in cement mortar 1:4 complete all as specified and directed.

Non skid floor tiles, colored, of size 400x400x7mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 10 mm thick bedding layer in cm 1:6 complete all as specified and directed.

Glazed ceramic colored tiles of size 300x450x6mm thick or of size approved in dado, set and jointed in neat cement on and including the provision of 10mm thick rendering in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F 15 mm bore Chromium plated Bib taps (Fancy type) cast copper alloy with crutch or butterfly handle, screwed down , screwed for iron pipe complete all as specified and as directed.

S&F in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .

Supply and fixing in replacement 15 mm bore stop valve (or angle valve) fancy ,(concealed type) chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directe

S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

Supply and fixing in repair 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified.

Supply and fix in repairs Toilet paper holder of of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed

S&F Vitreous China Urinal in repair bowl type, white of size 465 mm x 355 mm x 265 mm (excluding flushing cistern, flush pipe but including waste pipe , grating and union for discharge pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws or brackets, pointing around urinal back in cement etc. complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.

S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.

S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs vitreous china, countertop oval shaped wash hand basin, white, of size 560mm x 450mm , including 32 mm dia brass chromium plated waste coupling and PVC waste pipe including angle iron brackets complete all as specified and directed.

Supplied only waste coupling 32 mm dia PTMT complete all as specified and directed.

Supply and fix in replacement; 125mm size brass chromioum plated shower rose with angular arm with swivel jiont complete all as specified and directed.

Supply and fix in replacement; PVC connection 15mm dia and 60cm long with two Nos of brass check nuts and washers complete all as specified and directed.

S & F in 'repair' CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron soil waste and vent (Spun pipe, bore of pipe 100mm) pipe with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F Cast iron soil, waste and vent (Spun pipe, bore of pipe 100mm) pipes with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

Bends (100mm bore radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F Branch pieces,100mm bore single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron soil waste and vent spun pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed.

S & F Cast iron soil, waste and vent spun pipes 75mm bore with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

Bends (75mm bore radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F Branch pieces,75mm bore single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 50mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F Cast iron cowls 100mm bore complete all as specified and directed.

S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for 100MM bore Cast iron floor trap/Nahani /P or S trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for 75MM bore Cast iron floor trap/Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Salt-glazed stoneware gully traps,(Size of gully traps in 150mm x 150 mm) square or round mouthed, tvpe 'P' complete all as specified and directed.

M&L for providing Plain cement concrete bed for 150 mm bore drain pipes in 1:4:8 type D 2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes of after they are laid and tested complete all as specified and directed.

M&L for Salt-glazed stoneware drain pipes laid in trenches and jointed (Internal diameter of pipe 150 mm) with collars complete all as specified and directed.

Providing precast cement concrete1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) set in CM 1:6. including all necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds, mitred/stopped ends etc. complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out loose and soft soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Supply and fixing 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .

Refixing old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed.

Taking down or up 20 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Supply and fixing 20mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .

Refixing old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed.

Taking down or up 25 or 32mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Refixing old GI tubing 25 or 32mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed .

Dismantling water tanks and removing to store (exc 500 & n.exc 1000 ltr) complete all as specified and directed.

S&F Rotational moulded polyethylene 500 Ltr capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L rendering 15 mm thick wall plaster in CM 1:3 mixed with water proofing compound complete all as specified and directed.

M&L for applying two coats of Dr Fixit pidecrete URP in sunken floor portion of toilets & bathroom, chajja, staircase. etc by using URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush. Etc complete all as specified and directed.

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified and directed.

Providing and erecting adjustable ( jack type ) steel props (up to full height, braced at centre, resting on wedge and block to support the structure provisionally during repair work and maintaining them in position till required i.e chipping of unsound concrete/ demolition & complete treatment complete all as specified and directed.

Chipping of unsound weak and cracked concrete/ cover of reinforcement over RCC member (ceiling beam, columns etc) or as per site requirement upto minimum half depth of bars by chiseling and disposal of rubbish form site to a distance not exc 250 mtr incl all required scaffolding/ ladders complete all as specified and directed.

Cleaning of existing reinforcement with wire brush/ rotary wire brush to make surface free from rust scales, loose material, diet etc, complete and proving applying two coats (0.4 Kg/Sqm) of alkline rust converting primer Sika Rust off-100 or equivalent in Fosrock/ Pidilite on the existing rebar and allowing it to react with rust for 6 hrs form corrosion resistant, insoluable and adherant protective layer, including cleaning the reinforcement, wire brushing to remove the rust spalls with time interval of 1 hour between the coats incl all required scaffolding / ladders complete all as specified as per manufacturer's instruction and as directed. Note:- Girth of RCC member shall be measured complete all as specified and directed.

Providing and application of zinc rich epoxy anti-corrosive protective coating of sika friazinc (R) or equivalent for rebar corrosion protection system in 2 coats (of 0.4 kg/Sqm approx) complete all as specified and directed. The product should confirm carbonation resistance of 2mm and bond strength > 1N/Sqmm according to ASTM C-882-78 incl all required scaffolding/ ladders complete all as specified as per manufacturer's instruction and complete all as specified and directed.

Providing, mixing & applying two components Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer specification with Sikadur(R)-32 LP or equivalent in consumption of 0.4Kg /m2. The product should comply with ASTM C-881 Type II Grade 2 Class B+C and bond strength should be 10 MPa, including all required scaffolding/ ladders complete all as specified as per manufacturer's instruction and as directed.

Rebuilding the section of damaged RCC elements to its original size or as per consultants recommendations in thickness upto 20 mm in layer of 10 mm each by providing and applying with pre-batched, one component fiber reinforced cementations patch repair mortar Sika(R) Mono Top (R) -122 F or equivalent having compressive strength >= 50 N/Sqmm (28 days) according to ASTM C 109 : Flexural strength >= 50 N /Sqmm (7 days) according to ASTM C 293-79, including all required scaffolding/ ladders complete all as specified as per manufacturer's instructions complete all as specified and directed.

Dismentalling of brick tile or treccing tiles single layer on roof & disposal of retrived material up to distence n exc 100 m where directed , complete all as specified and directed.

Dismentalling of Mud in roofs , any thickness , including plastering and leeping (where full thickness removed or only a part there of disposal off rubbish upto a distence n exc 100m where complete all as specified and directed.

M&L ScreedBed or bedding layer of mortar 1:4 of 15mm thick as on roof surfaces parapet orvertical beam surface (horizontal orvertical ) of finish even and smooth without using extra cement Note :using only course sand (Toka Sand 0 in screed /Plastering complete all as specified and directed.

M & L for preparation of Roof /Wall concrete /plastered surfaces & applied a coat of Cold Bituminous primer over cleaned surface @0.40 Kg . Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum wt 3.50 Kg/Sqm reinforced with polyster non woven fabric (weighing not less then 150gms /Sqm) manufactured by M/S STP Ltd/IWL India LTd or Its Eqvivalent , laid as per the Manufacutures instruction with side overlap of 75mm & end overlap of 100mm & tucked into the chases on vertical surfaces if required complete all as specified and as directed.

M & L for Cement concrete tile 25cm x25cmx20 to 22mm thick , machine pressed , set and jointed and pointed in neat cement slurry over and including 15mm thick screed in CM 1:4 with and including mixing of liquid water proofing compound as per manufacuteres specification , as in roof and floor tiles complete all as specified and as directed.

M&L Making Beching with PCC (1:2:4) type B0 using WPC as per Manufacturees instruction along Side Wall adjoining to Roof in Concave Shape Complete all as specified and as directed. Note : WPC shall be measured and Paid Seperatly

M&L PCC (1:2:4) type B0 using 12.5mm aggreegate as PCC Padding to maintain slope at roof Complete all as specified and as directed.

Surface excavation n.exc 30cm depth & average 15 cm deep & getting cut in soft/loose soil complete all as specified and directed.

M&L for Hardcore of stone aggregate gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded agg) as in Sub-base to floor finishes complete all as specified and directed.

M&L 25mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

INTERNAL ELECTRIFICATION

Taking down carefully to existing serviceable copper point wiring (light,fan, socket or power) complete including fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removing materials to E/M store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M&L for wiring with 1.5 sqmm size starnded FRLSH copper conductor cable single core multi starnded copper in and including PVC conduit medium grade and MS termunal boxes suitable for housing modular switches , sockets and regulators with all fittings and fixing materials including modular inner plate and cover plates of suitable modules and multistarnded FRLSH copper earth continuty conductor of size 1.5 sqmm and connecting to common earth dolly all as specified and directed for the following complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed. (Note : - Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' ).

One light/fan/exhaust fan point controlled by one 5 Amps one way switch.

One socket outlet 3 pin 5 Amps on independant board.

All as per item No 114 here in before but for one socket out let 3 pin 15 Amp with 2.5 sqmm PVC copper conductor and 2.5 sq mm PVC insulated copper conductor as earth contiuity conductor.

S&F Switch modular type single pole, one way, 5/6 Amp, complete all as specified and directed.

S&F Switch modular type single pole one way, 15/16 Amp, complete all as specified and directed.

S&F Switch outlet 2 in 1, 3 pin 5A complete all as specified and directed.

S&F Switch outlet 2 in 1, 3 pin 5A and 15Amp complete all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in replacement sub main wiring with three run (phase neutral and earth) of 6 sqmm PVC insulated and unsheathed copper conductor cable in and including min 25 mm dia non metalic rigid PVC conduit and accessories like tee, bend, socket and copper lugs etc complete including cutting chasing and grouting on any type of wall, making good to the disturbed surfaces with CM (1:6) complete all as specified and directed. Note- Three run of copper conductor cable with conduit and accessories shall be measured as unit length.

S&F in replacement sheet metal encloser double door 08 way SPN suitable for 240Volt AC supply ISI marked complete with neutral and earth bus bar, made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed.

Supply and fixing factory made Loadline vertical type TPN DB 8 way double door, protection class IP 43 made out of CRCA sheet with 200 Amps rated copper busbar, neutral and earth link, blanking plates, locking arrangement and 125 Amps 4Pole MCCB as incomer complete all as specified and directed incl taking down old DB complete all as specified and directed.

S&F MCB 6-32 Amp 240V SP 10 KA ‘B’ series complete all as specified and directed.

S&F MCB 40-63 Amp 240V SPN 10 KA ‘B’ series complete all as specified and directed.

Supply and fixing LED light fitting 1X20 Watt, 230 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from cieling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing exhaust fan metal body AC, single phase, 230V of size 450mm sweep with blades and frame and louers including making suitable size hole into wall and plastering the wall and plastering the wall with cement mortar complete all as specified and directed.

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

S&F LED street light fitting 25 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 & IK 08 protection including fixing with suitable bolt and nuts complete with making connection complete all as specified and directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s Manav Builders

LM CONSTRUCTIONS

AABIA CONSTRUCTION

SUBHASH ARORA CONSTRUCTION CO

M/S KARTIK BUILDERS

Easyways Enterprises