Regarding ordering price per kg from market price for auction sale of obsolete and scrap materials not in architectural and mechanical use at Girna Pumping Water Treatment Center Savkheda Dapora Pumping and Umala Water Treatment Center under W S Dept

Amount

200 HP 150 kW Vertical Halo Shaft ele. Motor with copper widing 75 kg. 3 phase 440 V. (Approximately 6 nos.)

Vertical turbine 200 HP Oil lubricated pump set, with foundation and materials as come -1) Column pipe 250 mm. 10 m in dia. 2) MS tube 80 mm dia. 10.5 mtr, 3) shaft carbon steel 50 mm dia. 12 mtr (approximately 6 pump sets)

Slippering type 200 HP Induction Motors 3 HP 440 volts (approximately 4 nos.)

Transformer 750 KVA. 11 KV. 440 volts with copper widing (approximately 1 no.)

Electrical Panel Board 16 Gauge (Approximately 1 No.)

Panel boards (of power factor) (approx. 1 no.)

200 HP Starter (A.T.S.) (Approximately 1 pc.)

3.5 core aluminum armed cable (approx. 15Mtr.)

3 core aluminum cable (panel to motor) armed (approximately 15 m)

3.5 Core 400 sq. mm. Aluminum Arbed Cable (Approximately 30 Mtr.)

I-Section (Top) 150 X 400 6 m long (12 m) M.S. Material (Approximately 2 nos.)

I-Section (Top) 150 X 200 - 4 m long (4 m) M.S. Material(Approximately 1 no.)

Hand Operated Trolley with Block ( 3 Ton Capacity) (Approximately 1 No.)

Bottom I- Section 150 X 400 - 6 Meters in Length M.S. Material (Approximately 4 Nos.)

Bottom I-Section (Down Flatform) 150 X 400 - 6 Meters in Length M.S. Material (Approximately 2 Nos.)

C.I. Sluice Volve 250/200 mm. Size (Approximately 3 pcs)

C.I. Non Return Volve 250/200 mm. Size (Approximately 4 pcs)

C.I. Non Return Volve 450 mm. Size (Approximately 4 pcs)

Rolling shutters 1.98 X 3 meters (approximately 2 pcs)

Iron I-Section for Trolley 150 X 250 = 14.5 X 2 (Pump House ) (Approximately 29 m)

I- Section For Trolley 230 X 450 M.S. Material (Approximately 10 m)

Hand Operated Trolley with Block ( 2 Ton Capacity ) (Approximately 1 No.)

Oil tank with baseframe 200 kg. X 2 = 400 kg (approximately 2 nos.)

C.I. Sluice Volve 200 mm. Size (Approximately 6 pcs)

C.I. Non Return Volve 200 mm. Size (Approximately 4 pcs)

I- section for pump foundation 150 X 400 mm. = 4.5 Mtr. Long M.S. Material (approximately 2 nos)

M.S. Column pipe 5 ft. 200 ms. Size (Approximately 20 pcs)

Search Attester (Approximately 1 no.)

Rotary Compressor with Bottom Cylinder (Approximately 1 Nos.)

C.I. The sluice vole is 450 mm (Approximately 1 no.)

M.S. Slotted Pipe 15 ft. long – 6 knots (approximately 6 Nos.)

O.C.B. Old (approximately 4 nos.)

Induction motor 200 A.S. 150 kV 440 volts wuith coupling, foundation cum (approx. 3 nos.)

Coupled Pump Set 200 HP 150 kV. (Approximately 3 nos.)

Sluice Volve 300 mm. Size ( C.I.) (Approximately 3 pcs.)

C.I. Non-return volve 300 mm dia. (approximately 3 pcs.)

300 mm dia. M.S. Pipe (approximately 12 m.)

Rolling shutters (approximately 2 pcs)

Transformer 750 kVA. ( 11 KV/440 Volts) (Approximately 1 no)

Hand Operated Rowling Crane Double Girder (15 m. X 750 m. ) I Section 10 m. (Approximately 1 no.)

C.I. between filter beds. Pipes & Vols etc (Approximately 4 beds)

M.S. Section bridge with scraper frame with roaring paddles ( complete bridge ) (approximately 1 job)

200 HP Old heads of pumps, return valves etc. (at mill tank) (Approximately 5 pcs.)

M.S. The pipe is 250 mm long. (approximately 12 m)

Cone 200 H.P. Base (Approximately 1 no.)

Column Pipe (Approximately 5 pcs)

400 mm. T (approximately 2 pcs.)

Vertical halo shaft induction motor 300 h.p. 225 KW Jyoti Make ( with Copper Widing 75 KG) (Approximately 2 Nos.)

Vertical Turbine Pump Set Oil Lubricated Type 300 H.P. With Column Pipe MS. Tube, Carbon Steel Shaft Bowl Assembly Steel Plate Column Pipe Size 16 in. Size (13.5 kg) Shaft Size 65 mm. (14.5 m.) M.S. Cube size 90 mm. ( 13.5 m) (approximately 2 sets)

Transformer (Rohitra) 400 KVA/11 KV 440 Volts (Approximately 2 Nos.)

C.I. The sluice volve is 350 mm. diameter (approximately 2 pcs.)

C.I. Non-return vol 350 mm. (Approximately 2 nos.)

M.S. The pipe is 300 mm long. (approximately 7 m)

I-Section 3 Nos. ( 140 x 400 ) M.S. Material (Approximately 7 m)

I- section for motor foundation size 210 x 600 mm.M.S. Material (approximately 7 m)

C. Channel 2 Nos. 400 x 100 mm. (approximately 6 m)

Sluice Vol 600 mm. Size (in chamber) (approximately 1 pc.)

Non Return Volve 600 mm. Size (in chamber) (approximately 1 pc.)

The volve at the filter bed is 500 mm. Whole (approximately 31 nos.)

The volve at the filter bed is 300 mm. Whole (approximately 20 pcs)

Compressor Blower Motor (Approximately 2 pcs)

Oil Compressor (Approximately 2 pcs.)

Over head tank electric motor 7.5 h.p. (Approximately 3 nos.)

Over head tank pump 7.5 h.p. (Approximately 3 nos.)

Over Head Tank Monoblock Motor 10 H.P. (Approximately 2 nos.)

Chlorine Motor Coupled Set 7.5 H.P. (Approximately 4 nos.)

Recycling Field Pump (Approximately 1 No.)

C.F. Bridge Gear Box (approx. 10 nos.).

Churner Motor (Approximately 10 pcs)

Bridge Panel (approximately 2 pcs)

Chlorine Panel (approximately 1 pc)

C.F. Washout Whale (approximately 2 nos.)

Alum Mixing Gear Box (Approximately 1 pcs)

sm corporation

jeen agencies

CHANDAMRUT ENTERPRISES