ADDN/ALTN AND SPECIAL REPAIRS TO BLDG NO P-2, P-3, P-4 AND 43 IN NN-II, P-42 IN CAMP AREA AT INS AGRANI, COIMBATORE

Amount

Dismantling of brick tiles or terracing tiles/Tarfelt single layer or roof and removing the deberis out side MD land all as per specified and as directed.

Demolition of cement concrete of any descriptiion and in any position and removing the deberis out side MD land all as per specified and as directed.

M& L for for PCC 1:2:4 type B1 (20 mm graded stone aggregate ) cast in situ for bed plates etc. all as per specified and as directed.

M&L for 15 mm thick water proofing cement plaster in cement mortor 1:3 mixed with approved water proofing compound finished even and smooth on concrete surfaces and all as per specified and directed. Note :-water proofing compound will be measured and paid saparately.

Supply only integral water proofing compound approved make.

M/L for water proofing treatment by applicatiion of oil based bituminos primer @250 gm per sqm and the plastered surface over a a coat of blown type bitumen grade 85/25 confirming to IS 702 heated to a working temperature at 180 degree C @1.20 kg per sqm of surface area over 4 mm thick APP modified torch applied water proffing membrane weighing not less than 4 kg per sqm reinforced with non woven polyster matt, weighing n less than 160 gm per sqm having softening point not less than 140 degree C longitudinal tensile strength not less than 650 N/cm tear strength of 180 N (mn) of static punctre resistance of 180, keeping a minimum of 10 cm over lap and 15 cm end lap all as specified and as directed.

M&L for hydraulically,pressed burnt clay tiles plain of size200x200, 18/19 mm machine made laid over cement mortar screed 15 mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in cm 1:3 mixed with 5% crude oil by weight of cement all as specified and as directed.

Disconnecting the existing PVC water tank setting aside (or lowering if required) for repairs, cleaning etc and hoisting if reqd reconnecting and re-fixing in position exc 250 ltr but n exc 500 ltr capacity all as specified and as directed.

Disconnecting the existing PVC water tank setting aside (or lowering if required) for repairs, cleaning etc and hoisting if reqd reconnecting and re-fixing in position exc 500 ltr but n exc 1000 ltr capacity all as specified and as directed.

S&F PVC (SWR) pipes single socketed including all fittings, in any length with rubber ring joints,110 mm dia, fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings and accessories all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4 sqm each, with shutters, without taking off shutters from the frames all as specified and as directed.

Taking down chowkats or frames n exc 1.5 sqm with shutters, without taking off shutters from the frames all as specified and as directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each easing and refixing in the same opening all as specified and as directed.

Taking down shutters of any description exc 2 sqm each easing and refixing in the same opening all as specified and as directed.

S&F Pressed steel frames of size of frame 165x60mm for doors with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete as specified .

S/F second class hard wood plain solid straight chowkats and frames, wrought, frames rebated on the solid rounded on chamfered , put together with glue, pinned at joints etc complete as specified .

S&F Second class hard wood Plain, framed,panelled shutters(any number of panels),40 mm thick, with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc complete as specified and as directed.

S&F 35 mm Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars,any numbers etc complete as specified and as directed.

S&F 30 mm Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars,any numbers etc complete as specified and as directed.

S/F Sheet glass ordinary quality,4mm thick and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete as specified and as directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete as specified and as directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each etc complete as specified and as directed.

Taking down shutters of any description not exc 1 sqm each etc complete as specified and as directed.

S/F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS squre tube etc complete as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete as specified and as directed.

M&L for cement concrete 1:2:4 type B0 (12.5 mm graded stone aggregate) as in pressed steel door frame filling etc complete as specified and as directed.

Cutting holes in brick wall built in CM for inserting holdfast and making dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 . Depth of embedded portion of hold fast or lugs measured from the face of the jamb into the wall exc half brick but n.exc one brick etc complete as specified and as directed.

S&F Bands , straps, supports or straps for rainwater, ventilating pipes , including bolts , if required ; hooks (stay), heavy , for large gates; hook and pintle hinges; large hasps and staples ; chains;hand made sliding bolts ; clampls ; hold fast ; wall ties ; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc complete as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 (20 mm graded stone aggregate) as in bed plates, filling around hold fasts of doors and windows ,surface channel including necessary formwork,etc complete as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; ramework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete as specified and as directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded etc complete as specified and as directed.

S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified with powder coating (minimum thickness powder coating 50 micron) etc complete as specified and as directed.

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified with powder coating etc complete as specified and as directed.

S/F Butt hinges medium weight, cold rolled, mild steel 100mm etc complete as specified and as directed.

S/F aluminium handles cast type,anodized 150 mm long etc complete as specified and as directed.

S/F aluminium handles cast type,anodized 125mm long etc complete as specified and as directed.

S/F aluminium handles cast type,anodized 100mm long.

S/F aluminium anodized barrel tower bolt of extruded section, 200 mm long etc complete as specified and as directed.

S/F aluminium anodized barrel tower bolt of extruded section, 150 mm long etc complete as specified and as directed.

S/F aluminium anodized barrel tower bolt of extruded section, 100 mm long etc complete as specified and as directed.

S/F aluminium alloy, anodized, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete as specified and as directed.

S/F aluminium alloy, anodized, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads etc complete as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete as specified and as directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete as specified and as directed.

S&F aluminium anodized barrel tower bolt of extruded section, 150 mm long, but fixed in repairs etc complete as specified and as directed.

S&F aluminium alloy, anodized, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy,but fixed in repairs etc complete as specified and as directed.

S&F aluminium alloy, anodized, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy , but fixed in repairs etc complete as specified and as directed.

S&F but hinges medium weight, cold rolled, mild steel 100mm long but fixed in repairs etc complete as specified and as directed.

S/F aluminium handles cast type,anodized 150mm long but fixed in repairs etc complete as specified and as directed.

S/F floor door stopers of aluminium alloy body and tounge, anodized with hard drawn steel spring, fixed in floor, 150mm long fixed in repairs etc complete as specified and as directed.

S&F Second class hard wood Plain, framed,panelled shutters(any number of panels),30 mm thick, with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc complete as specified and as directed.

S&F 100mm Hasp and staple, safety type,aluminium anodised and fixed with screws etc complete as specified and as directed.

Supply and fix in repairs Particle board 18/19mm thick, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work etc complete as specified and as directed.

M&L expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, weight per sqm not exe 4Kg including taking down old expanded metal etc complete as specified and as directed..

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc as specified and as directed..

M/L preparation of new wooden surfaces exc10cm widht or girth and applying two coats of synthetic enamal paint over a coat of pink primer etc complete as specified and as directed..

M/L preparation of new steel surfaces exc10cm widht or girth and applying two coats of synthetic enamal paint over a coat of zink chrome primer etc complete as specified and as directed..

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15cm thickness below or above ground level etc complete as specified and as directed.

M/L Rendering 15 mm thick in cement mortar 1:3 on concrete surfaces of wall/floor as in sunken floors , finished even and smooth without using extra cement, including application of two coats of water proofing chemical paste of brush bond powder and Nito bond liquid manufactured by M/S FOSROC as per manufacturers instruction etc complete as specified and as directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete as specified and as directed.

M/L Cement concrete type C1, 1:3:6 , using 20 mm graded stone aggregate, as in sunken floor treatment etc complete as specified and as directed.

M/L cement concrete type C1,1:3:6 using 20mm graded aggregate, as in plinth protection, 100mm thick etc complete as specified and as directed.

M/L Cement concrete type D2 , 1:4:8 , using 40mm graded stone aggregate, 75 mm thick as in sub base etc. to tile flooring etc complete as specified and as directed.

M/L Cement concrete type C1 , 1:3:6 , using 20mm graded stone aggregate, 50 mm thick as in sub base etc to kota stone flooring etc complete as specified and as directed.

M/L cement concreate type B-0 1:2:4, using 12.50mm graded stone aggeregate, 25mm thick as in base concreate to kota stone flooring etc complete as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar including cement mortar backing coat etc complete as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, and brushing neat cement slurry with 3.0 kg of cement per sq. metre etc complete as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 etc complete as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:4 etc complete as specified and as directed.

M&L for non skid ceramic tiles, coloured, 7 to 8mm thick (Square/rectangular) 300 x300 mm size , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles etc complete as specified and as directed.

M&L for non skid ceramic tiles, coloured, 7 to 8mm thick (Square/rectangular) area of each tiles exc 0.06 SM but not exc 0.11 SM as in vertical surfaces like skirting etc , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles etc complete as specified and as directed.

M&L for Coloured glazed ceramic tiles in verticle surfaces 300x200x7mm, set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles etc complete as specified and as directed.

Taking down cement plaster on brick or concrete surfaces, including racking out joints, hacking for key, scrubbing down with water etc complete as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 ,finished fair and even without using extra cement etc complete as specified and as directed.

M&L for Machine cut kota stone slab flooring 15-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Kota stone slab 15-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, landing, chajjas and similar suspended work ( reinforcement cut as required to facilitate demolition) etc complete all as specified and as directed.

M&L for Re-inforced cement concrete (nominal mix) type B0, 1:2:4 (12.5mm graded stone aggregate) as in chajjas( reinforcement cut as required to facilitate demolition) etc complete all as specified and as directed.

Use and waste of formwork with rough finished surface of concrete flat to chullah hoods, chajjas,troughs and similar work including edges in any hight in two/three story buildings including necessary scafolding etc complete all as specified and as directed.

M&L TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finishing even and smooth surface without using extra cement with water proofing compound etc complete all as specified and as directed.

M&L for applying solar reflective bitumineous aluminium paint @ 100 gm / Sqm over the new treated roof surface etc complete all as specified and as directed.

M/L Repair to RCC chajja fins, fascias, louvres and RCC parappet, fins etc at any height in 3/2 storey building with PCC 1:2:4, type B 0 using 12.50 mm graded stone aggregate including necessary scafolding work, form work, rendering on RCC work etc to match with the existing surfaces, etc complete all as specified and as directed.

M&L for Grouting 25 mm thick under stanchion bases or grillages, etc. including any temporary shuttering to edges with cement mortar 1:2 , etc complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required fixed on wall,110/75/50mmdia, including all fittings etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,50mm dia, fixed to walls etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,75mm dia, fixed to walls etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm dia,etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,110 mm dia, fixed to walls etc complete all as specified and as directed.

S&F PVC (SWR) Bends 50mm bore etc complete all as specified and as directed.

S&F PVC (SWR) Bends 75mm bore etc complete all as specified and as directed.

S&F PVC (SWR) Bends 110 mm bore etc complete all as specified and as directed.

S&F PVC (SWR) Bends 110 mm bore , but with access door ,etc complete all as specified and as directed.

S&FPVC (SWR) branch piece,single (single Y) equal or unequal , 110mm , but with access door etc complete all as specified and as directed.

S&F PVC (SWR) branch piece,single (single Y) equal or unequal , 110mm ,etc complete all as specified and as directed.

S&F PVC (SWR) branch piece,double (double Y) equal or unequal , 110mm etc complete all as specified and as directed.

S&F PVC (SWR) branch piece,double (double Y) equal or unequal , 110mm but with access door ,etc complete all as specified and as directed.

PVC (SWR) junction,single (single T) equal or unequal , 110mm ,etc complete all as specified and as directed.

PVC (SWR) junction,single (single T) equal or unequal , 75 mm ,etc complete all as specified and as directed.

PVC (SWR) junction,single (single T) equal or unequal , 75 mm , but with access door etc complete all as specified and as directed.

S/F PVC(SWR) floor trap, 75mm ,plain with grating, including jointing with solvent cement etc complete all as specified and as directed.

S/F PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement etc complete all as specified and as directed.

PVC (SWR) vent cowl 75mm,etc complete all as specified and as directed.

M& L for rendering 10mm thick on fair face of brick work or concrete surfaces in cement mortar 1:6 as in internal plastering , finished even and smooth without using extra cement etc complete all as specified and as directed.

M& L forrendering 10mm thick as backing coat on fair face of brick work or concrete surfaces in cement mortar 1:4 in external plastering , and 5mm thick final coat in CM 1:4 with approved water proofing powder over the backing coat, finished even and smooth without using extra cement etc complete all as specified and as directed.

M& L for rendering 5mm thick on fair face of concrete surfaces in cement mortar 1:3 as in ceiling plaster , finished even and smooth without using extra cement etc complete all as specified and as directed.

M& L for preparation of new plastered surfaces of wallls and applying two coats of oil emulsion distemper over a coat of alkali resistant priming coat etc complete all as specified and as directed.

M& L for preparation of new plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and as directed.

M&L for preparation new plastered external surfaces and application of one coat of primer and allowed to dry overnight before applying first coat of acrylic exterior emulsion complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of acrylic exterior emulsion paint ( Asian paint apex ultima proteck or equivalent of Berger /Nerolac ) on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of acrylic exterior emulsion paint ( Asian paint apex ultima proteck or equivalent of Berger /Nerolac ) on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed.

M&/L for Preparation of old plastered surfaces of external walls and applying one coat of antifungal exterior emulsion complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement based paint priming with alkali resistant priming paint complete all as specified and as directed.

M&L for Preparation of old treated surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for Preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for Preparation of old treated surfaces of walls and applying one coat of cement based paint complete all as specified and as directed.

M&L for preparation of old treated wooden surfaces of any description , exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old treated steel surfaces of any description , exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550X400mm including brackets complete all as specified and as directed.

S&F in repairs Pillar taps,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. Bore of pipe 15mm, complete all as specified and as directed.

S&F in repairs ,Tubular towel rail,brass chromium plated, 20mm dia, D type, 60cm long between flanges etc, complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) etc, complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) etc, complete all as specified and as directed.

S&F in repairs, PVC valveless, syphonic action type, flushing Cistern, 10Ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets, etc, complete all as specified and as directed.

S&F Flush pipe of polyethylene of low or high density of PVC. 32 mm dia, for low level flushing cistern etc, complete all as specified and as directed.

S&F in repairs, Chromium plated brass Bib taps,fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm dia,complete all as specified and as directed.

S&F in repairs Chromium plated fancy type brass Stop valves/ Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,15mmdia,complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F Health faucet , brass , chromium plated suitable for 15mm bore pipes complete all as specified and as directed.

S& F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair Stainless steel Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Taking down and Refixing old steel tubing / UPVC pipe and connections in new or old position (Walls, ceiling, floors/trenches etc.) of 25mm bore complete all as specified and as directed. Note : (a) The rates include for cleaning or rerunning the old screw threads as required (b) The rates include for Fittings such as Sockets, bends, elbows, tees, short pieces, caps, plugs, and union etc. if required to be replaced.

Taking down and Refixing old steel tubing / UPVC pipe and connections in new or old position (Walls, ceiling, floors/trenches etc.) of 20mm bore complete all as specified and as directed. Note : (a) The rates include for cleaning or rerunning the old screw threads as required (b) The rates include for Fittings such as Sockets, bends, elbows, tees, short pieces, caps, plugs, and union etc. if required to be replaced.

Taking down and Refixing old steel tubing / UPVC pipe and connections in new or old position (Walls, ceiling, floors/trenches etc.) of 15mm bore complete all as specified and as directed. Note : (a) The rates include for cleaning or rerunning the old screw threads as required (b) The rates include for Fittings such as Sockets, bends, elbows, tees, short pieces, caps, plugs, and union etc. if required to be replaced.

M&L for UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings of outer dia of the pipe 20mm including taking up or down steel tubing and connections complete all as specified and as directed.

M&L for UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings of outer dia of the pipe 15 mm including taking up or down steel tubing and connections complete all as specified and as directed.

M&L 3 payer PP-RC (Polypropylene random copolymer) pipes outer dia 20 mm SDR 7.4 & PN 16 UV stalilised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete fixed /concealled on wall floor ceiling complete all as specified and as directed.

M&L for brickwork with subclass 'B' bricks , straight or curved on plan exc 6 m mean radius and built in CM 1:6 complete all as specified and as directed.

M&L for complete removal of existing surface of walls and preparation of old surface and applying two coats of oil bound distemper over a coat of alkali resistant priming coat all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out of MD land ,all as specified and as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar 150mm internal dia of pipe complete all as specified and as directed.

Excavation in trenches n exceeding 1.5 Mtr wide and n exc 1.5 Mtr deep for foundations etc n exc 10 Sqm on plan and getting out in hard / dense soil complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundation , mass concrete etc complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on concrete or brick surfaces finished fair and even with using water proofing compound 3% by weight of cement complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole cover set in CM 1:4, complete all as specified and as directed.

M&L for MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for RCC pipes class NP2 of 150mm dia laid and jointed complete with collars complete all as specified and as directed.

M&L for RCC pipes class NP2 of 100mm dia laid and jointed complete with collars complete with collars complete all as specified and as directed.

M&L for concrete bed to drain pipe 150mm dia including packing under and haunching against the sides of pipes after they laid and tested in cement concrete 1:4:8 type D1 using 20 mm graded stone aggregate complete all as specified and as directed.

M&L for concrete bed to drain pipe 100 mm dia including packing under and haunching against the sides of pipes after they laid and tested in cement concrete 1:4:8 type D1 using 20 mm graded stone aggregate complete all as specified and as directed.

Returning, filling in, incl spreading, levelling, watering and well ramming in layers n exc 25cm with hard/dense soil complete all as specified and as directed.

Removing excavated material to a distance n exc 50 Mtr and deposited where directed at a level n exc 1.5 Mtr above starting point in soil complete all as specified and as directed.

M & L cement concrete, type B1 1:2:4 (20 mm graded aggregate) in surface channels and drains including necessary form work complete all as specified and as directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finish the surface even and smooth without using extra cement complete all as specified and as directed.

S/F PVC (SWR) pipes in any length laid in trenches/ in floors/in walls etc as in weep holes 110mm dia complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring (concealed) for one light/fan/exhaust fan/bell point, with copper conductor in PVC conduit with multistranded FRLS copper conductor cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in pressed steel terminal boxes of required size and providing new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit including Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 , all as specified and as directed .

All as per item No. 162 above , but one three pin socket outlet 5 Amps, on independent Board.

All as per item No.162 above , but one three pin socket outlet 5 Amps on the same board with other switches

All as per item No.162 above , but one light point controlled by two 2 way switches.

M&L for point wiring (Concealed) with copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in pressed steel terminal boxes of required size and providing new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit including Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 , for One 3 Pin socket 15A Indepentent board all as specified and as directed .

Supply and fixing switch piano flush type single pole one way 5 amps all as specified and as directed .

Supply and fixing switch piano flush type single pole one way 15 amps all as specified and as directed .

Supply and fixing socket outlet 3 pin 5 amps, flush type all as specified and as directed .

Supply and fixing socket outlet 2 in 1, 3 pin, 5 and15 amps all as specified and as directed .

S&f Bell push flush type 5 amp all as specified and as directed .

S&F electric bell Ding-Dong AC 230 Volt comlete all as specified and directed .

S&F in replacement switch 16 amps 250 V AC two way with ISI mark comlete all as specified and directed .

S&F Lamp holder with insulated body with back plate suitable for batten fitting comlete all as specified and directed .

S&F 9/10 watt standard B22 LED bulb cool day light (6500-7500 K) 806/900 Lumen complete all as specified and directed. Make :- Cat part No. 929001176714 of Philips / SRL-9W-PO10 of Syska / Tajas 9W of Wipro."

Supply and fixing LED light fitting 1 x 9 watt / 1 x 10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Cat Part No. LW07-141-XXX-57-XX of Wipro /SLE BLH 10 W PLUS of Surya or equivlent in Philips.

Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specified and directed. Make : Cat Part No.LL20-111-XXX-65 NEE3 of Wipro /SLE BT 10 of Surya or equivlent in Philips.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Wipro/Philips/GE

S&F ceiling rose, 3 phase/ PVC/ polycarbonate isolated body complete all as specified and directed.

S&F single pole MCB 6 to 20 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed. Make/Model : L&T /Schneider/Seimens.

S&F SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed. Make/Model : L&T /Schneider/Seimens.

S&F Sheet metal enclosure for DB's double glazed door IP-43 Single pole & neutral 240 V, 8 way with cable end box conforming to IS-8623-1 & 3, IEC 61439-1 &3 made in CRCA sheet steel, RAL 9003 powder coated ready to use DB's provided with 100 A insulated phase bus bar, neutral bar with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnection wire set, cable ties, blanking plates and circuit identification label with provision for DP MCB as incomer and SP MCBs as outgoing complete all as specified and directed . Make : L&T /Schneider/Seimens.

S&F submain wiring alongwith earth wire with 2 run of 6 Sqmm (Main Cable and neutral) and one run of 6 Sqmm as earth wire of FR PVC insulated copper conductor, single core cable in drawn through and including rigid PVC conduit of size 25 mm dia with all fittings accessories all as directed, including Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 , and taking out of old submain wiring complete all as specified and directed .

S&F Sheet metal enclosure for DB's double glazed door IP-43 Triple pole & neutral 415 V, 4 way with cable end box conforming to IS-8623-1 & 3, IEC 61439-1 &3 made in CRCA sheet steel, RAL 9003 powder coated ready to use DB's provided with insulated vertical phase bus bar, neutral bar with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnection wire set, cable ties, blanking plates and circuit identification label with provision for 4 pole MCCB as incomer and SP/TP MCBas outgoings complete all as specified and directed . Make/Model : L&T /Schneider/Seimens.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 to 100 Amps and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . Make/Model : L&T /Schneider/Seimens.

M&L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron earthing lead 4 mm by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 25 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised iron / steel of size 75 x75 x 25 mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI Pipe light grade for watering and connected to earth test point all as per SSR plate No.3 including testing complete all as specified and as directed.

M&L for casing caping point wiring for One light/fan/Exhaust fan/bell point controlled by one switch,with multistranded colour code copper conductor FRLS cable 1.5 Sqmm size 1100 volts grade conforming to IS:694 including concealed GI boxes of 1.6 mm thick including one coat of synthetic enmelled black paint including 3 mm laminated sheet with brass screws including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same casing caping all as specified and as directed.

All as per Item No.188 above but for One 5 Amp socket out let independent.

S&F Sheet metal enclosure for DB's double glazed door IP-43 Single pole & neutral 240 V, 4 way with cable end box conforming to IS-8623-1 & 3, IEC 61439-1 &3 made in CRCA sheet steel, RAL 9003 powder coated ready to use DB's provided with 100 A insulated phase bus bar, neutral bar with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnection wire set, cable ties, blanking plates and circuit identification label with provision for DP MCB as incomer and SP MCBs as outgoing complete all as specified and directed . Make/Model : L&T /Schneider/Seimens.

Supply and fix exhaust fan complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed .

Taking down ceiling fan, sealing cable end ,refixing the fan in the existing position after completion of repairs of building and connecting up after cleaning etc including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Taking down exhaust fan, sealing cable end ,refixing the fan in the existing position after completion of repairs of building and connecting up after cleaning including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Lucky Enterprises

K S MUTHU CONSTRUCTTIONS

devan enterprises