NIET 07/SGP/2021 Dt-09.12.2021

Amount

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) in……………………. bailing out water as required complete. I) Depth of excavation not exceeding 1500 mm .

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm ……………..measurement of finished quantity)

Cement concrete with graded stone ballast (40 mm. size) excluding shuttering.i) 1:3:6 proportion. Pakur varieties.

Brick work with 1st class bricks in c.m (4:1) a) In foundation & Plinth.

125 mm. thick brick work with 1st class bricks in cement mortar (3:1) (i) In GroundFloor.

125 mm. thick brick work with 1st class bricks in cement mortar (3:1) (ii) In First Floor.

Ordinary Cement Concrete (mix 3 :1.5 :1) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, as per relevant IS codes.Rajmahal Variety.a) In ground floor

Ordinary Cement Concrete (mix 3 :1.5 :1) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, as per relevant IS codes.Rajmahal Variety. b) In first floor

Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. 25 mm to 30 mm thick wooden shuttering as per direction of E.I.C. I) In ground floor

Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. 25 mm to 30 mm thick wooden shuttering as per direction of E.I.C. II) In first floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc.removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. SAIL/TATA/RINL (i) Tor steel/Mild steel I) In Ground Floor.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc.removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. SAIL/TATA/RINL (i) Tor steel/Mild steel II) In first Floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including ……... where necessary.a] With 4:1 cement mortar , 20 mm thick plaster (i) In Ground Floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including ……... where necessary.a] With 4:1 cement mortar , 20 mm thick plaster (ii) In first floor

b] (i) With 4:1 cement mortar , 15 mm thik plaster (i) In Ground floor

b] (i) With 4:1 cement mortar , 15 mm thik plaster (ii)In first floor

c] With 4:1 cement mortar , 10 mm thik plaster

c] With 4:1 cement mortar , 10 mm thik plaster ii) In first floor

Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. in all floors about 1.5mm thick.

Supplying, fitting & fixing marble slab/ tile of 15 to 18 mm ………......as per direction of E-IC (white cement & pigment to be supplied by the Agency). a) With makrana plan pink / Adranga pink/ …….. Under green Bank bhastana Area of each Slab/tile upto 0.3 sq.m.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs. Grills weighting above 10 Kg/Sqm & upto 16Kg/sqm. (ii) 1st floor

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, ........................... in the connection. The tubewell should have a minimum 40 mm gap in between the outside of the tubewell pipe and the bore. For depth upto 150 metre for 50 mm dia tubewell with top enlargement of 100 mm dia. I) 50mm dia boring etc

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, ........................... in the connection. The tubewell should have a minimum 40 mm gap in between the outside of the tubewell pipe and the bore. For depth upto 150 metre for 50 mm dia tubewell with top enlargement of 100 mm dia. II) 100 mm dia boring etc top enlargement

Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. I) 50 mm dia

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). I) 100mm dia

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). I) 50mm dia

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).I) 40mm dia

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). I) 25mm dia

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). I) 20mm dia

Supplying & Installation of 0.75 HP Sub-Mersible with electric motor panel

Supplying, fitting and fixing bib cock or stop cock. PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm each 154.00

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a)1500 litre capacity

Supplying & Installation of Iron treatment plant with treated sand chamber , specification 14X65 F.R.P vessels (ISO) ,media 250kg treted sand ,100kg graval 25 NB multipart valve with all fittings.[Quoted Rate]

Supplying & Installation of Arsenic treatment chamber specification 14X65 F.R.P vessels (ISO) , Activated Alomina chamber,media 150kg 25 NB multipart valve with all fittings.[Quoted Rate]

Supplying & Installation of oxidization chamber (ISO) of specification 12X48 F.R.P vessels MnO2 chamber, 50kg MnO2 media used , 25 NB multipart valve with all necesary fittingss.[Quoted Rate]

Supplying & Installation of Carban chamber (ISO) of specification 14X65 F.R.P vessels 100kg Carbon chamber, 50kg , 25 NB multipart valve with all necesary fittingss.[Quoted Rate]

Supplying & Installation 5 micran sediment filter (ISO) of specification 2.5X20" with all necesari fitting.[Quoted Rate]

Supplying & Installation of Clorine Dozer (ISO) with 30 litre capacity with all necesary fittingss.[Quoted Rate]

Arrangment of power & control box with power conection. [L.S]

Display board at site

M/S B.P.M CONSTRACTION

M/S UNITED ENTERPRISE