REPAIR/REPLACEMENT OF BOUNDARY WALL, HARDSTANDING, GARBAGE BIN, FENCING, GATE AND ALLIED WORK IN OTM ACCN UNDER AGE B/R-I AT ITARANA CANTT, ALWAR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving exc 15cm thick (below or above ground level) complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness as in floors, pavings, aprons, pillars, coloumns, slabs, pathway etc laid dry or laid dry and pointed complete all as specified & directed.

Dismantling of cement concrete (unreinforced) kerb stone and the like of any description of and in any position not otherwise specifically provided for complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1: 4 complete all as specified.

M&L for brick work with old size flyash bricks, straight or curved on plan exc 6 mean radius, built in CM 1:6.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed.

Extra over stone walling for hammer dressing to face stone and dressing of face, beds and joints as specified of random rubble walling with maximum depression on face from straight edge held against the dressed surface n.exc 20mm.

Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in CM 1:4 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of wall & applying two coats of cement base paint over a coat of primer chalk whiting, complete as specified and directed.

M&L PCC 1:3:6 type C2 using 20 mm graded crushed stone aggregate as in surface channel/ drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel exc 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc.

M & L for Providing cement concrete type B1, 1:2:4 (20 mm graed aggregate) as in copings

Supply only glass dividing strips 3 mm thick and 38 mm width

M&L cement concrete 75mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement complete all as specified & directed.

M & L for 20 mm thick Granite (of any type) tiles machine cut, bedding and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing icluding 15mm thick screed bed in CM 1:6 complete all as specified and as directed

M & L for 20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10mm thick rendering in CM 1:4 for recieving stone etccomplete all as specified and as directed

Material & labour for rubber moulded concrete colour tiles with grey cement pigment of size 300 mm x 300 m x 22-25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigment.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate)75mm thick on in sub base of floor

M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor fcomplete all as specified & directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

S&F for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment laid over sand cushing complete all as specified & directed. Note :- Sand cushioning will measured and paid seperately.

All as per item No 25.00 here in before but except tiles (old tiles to be re-used).

M & L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

S&F for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade with grey cement and no pigment laid over sand cushing complete all as specified & directed. Note :- Sand cushioning will measured and paid seperately.

Supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as directed

M&L Pre-cast (Factory casted) cement concrete Kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) with solid blocks, exc. 10 cm in width and setting and jointed in cement mortar 1:6, complete all as specified & directed.

All as per item No 30.00 herein before but except cement concrete Kerb stone (old stone to be re-used) set in CM 1:4

M & L for preparation of kerb stone, new un-treated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint in black and white colour over a coat of primer complete all as specified and directed.

M & L for preparation of kerb stone,old painted concrete surfaces or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint in black and white colour complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 using 40 mm graded stone aggregate as in surface channel, gap between road & road side kerb stone and the like including finishing the top of benching even and smooth using extra cement complete all as specified & directed.

M & L for 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded crushed stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

Dismantling Asbestos Cement Corrugated or Semicorrugated in Roof covering .

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws as specified

S&F for steel work in tubular section for purlin/rafters etc including special shaped washer etc. complete using induction butt welded tubes conforming to I.S. 1161-1998 grade St- 240.

M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even .The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed by Engineer in Charge.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specified & as directed.

S&F for 75mm thick steel fibre reinforced (SFRC) manhole cover with iron frames (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton /Sqm in square rectangular or Circular shape complete all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in soft/loose soil.

M/L cement concrete type C-2, 1:3:6 ( 40 mm graded aggregate) in foundation filling mass concrete for post holes etc complete all as specified and directed.

Dismantling Fencing of wire mesh Any type As directed by engineer in charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling posts,purlins, or any part of truss, struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground or wall.

S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe 410 or Fe -310-0

S&F mild steel bolt purpose made with hexagonal or square head one end screwed the other end or screwed both ends each screwed to be fuitte3d with washer and one hexagonal or square nuts exceeding 50mm and n exc 75 mm long dia of the shank 16 mm.

Fixing only chain link fencing including line wire any mesh size and type to any type of standards rails, straining bolts etc inlcluding provision of binding wire

Supply only chain link MS galvanised fencing any size or type weight n exc 4.00 Kg

S&F mild steel MS round bar 10 mm dia and over cut to length bent to shape required including cranking bending hooking etc and binding with MS wire 0.9 mm dia (annealed)

S&F In Repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed including taking down old wire.

M & L for treating ends of posts, backs of chowkhats, etc., area tarred exc. 0.1 Sqm but n.exc 0.5 Sqm each complete all as specified and directed.

M&L for preparing new steel surfaces of any description width or girth exc 10 cm applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified.

All as per item No 55 above but n.exc 10 cm width or girth

S&F for Precast cement Concrete louvres and jallies, 25mm thick Type B0 (1:2:4) using (12.5mm aggregate ) including all mouldings but excluding frame (measured solid), set in cement mortar 1:6

M&L Reinforced concrete pipes, class NP-2 of 450mm bore laid and jointed complete with colars in cement mortar.

M&L Reinforced concrete pipes, class NP-2 of 300mm bore laid and jointed complete with colars in cement mortar.

PCC (1:4:8) type D-2, using 40 mm graded stone aggregate in foundation/bed mass concrete for RCC pipe 450 mm bore complete all as specified.

ALAKNANDA ENTERPRISES (BID ID -3356612)

A K ENGINEERS AND SONS (BID ID -3364323)

M/s ESS KAY Construction (BID ID -3356973)

Radha Enterprises (BID ID -3356355)

shiva construction (BID ID -3356740)

M/S GAURI CONSTRUCTION (BID ID -3352509)

vandana enterprises (BID ID -3356862)

Hitesh Construction (BID ID -3364120)