Development of Panchayat Market with City Square at Silvassa which includes 1year DLP and Operations and Maintenance of entire project for 5years - 4th Call

Amount

CIVIL WORKS COST Excavation and Filling works Providing material and labour, machinery for Excavation of foundation/utilities upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff within the site for all lead, all lift/ depth (excluding hard rock and black cotton soil) anywhere from the site etc complete as directed by Engineer in charge. - Any type of soil or rock not requiring Blasting.

Providing material and labour for Excavation of foundation/utilities from 1.5 mt to 3.0 mt depth including sorting out and stacking of useful materials and disposing off the excavated stuff with in the site for all lead, all lift/ depth (excluding hard rock and black cotton soil) anywhere from the site etc complete as directed by Engineer in charge. - Any type of soil or rock not requiring Blasting.

Providing material and labour for Excavation of foundation/utilities from 3.0 mt to 5.0 mt depth including sorting out and stacking of useful materials and disposing off the excavated stuff with in the site for all lead, all lift/ depth (excluding hard rock and black cotton soil) anywhere from the site etc complete as directed by engineer in charge. - Any type of soil or rock not requiring Blasting.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. (Ramping by manual or mechanical means)

Providing material and labour for Filling in plinth with coarse sand with CBR value higher than 7% under floors or base of foundation including watering ramming, consolidating and dressing etc complete as directed by Engineer in charge.

Providing material and labour for Filling in foundation, plinth and plot filling with murrum (brought from out side) in layers of 20cm. thickness including watering, ramming and consolidating etc complete as directed by Engineer in charge.

Providing and filling in rubbles in foundation, in plinth and for plinth protection, filling, with quarry spalls covering and leveling the surface in layers of 20 cm thickness stone/metals or stone chips, including watering, ramming well and consolidating each layer using minimum 100mm cut size stones. (Ramping by manual or mechanical means)

Disposing off the un-used excavated earth (black cotton soil) for all lead and lift/ depth out side the site at non objectional place as directed by Engineer in charge.

Carrying out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

Dewatering in all sorts of soil and soft murrum, hard Murrum and boulders, Soft Rock, Hard Rock including removal of surface water, water from foundation, trenches and ground water as nessesary to performed construction required by the contract in accodance with the specification.

PCC, RCC works Providing material and labour for laying Plain cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) in Foundation, Plinth, Pavement, Road work including cost of formwork, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge.

Providing material and labour for laying controlled cement concrete M25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to minimum cement level content of 450kg (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Foundation, footings, base of columns, pavement, grade slab, roads and Mass concrete including cost of Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing material and labour for laying controlled cement concrete M25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to minimum cement level content of 450kg (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Fins, Pillars posts, Rectangular polygon in plan and struts upto floor two level including cost of Fair /Expose RCC finish Formworkwith centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing material and labour for laying controlled cement concrete M25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregatesconforming to minimum cement level content of 450kg (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs, landing, lintels, shelves, Balconies and Cantilever upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing material and labour for laying controlled cement concrete M25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregatesconforming to minimum cement level content of 450kg (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Plinth beam, Girders, Lintels and Cantilever upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work in Foundation, footings, base of columns, pavement, grade slab, roads and Mass concrete including cost of Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.Including cost of admixtures in recommended proportions as per IS: 9103. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained). Cement level 450 kg. Including providing and adding colour pigment as admixture of approved make.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work in Walls, from top of foundation level upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.Including cost of admixtures in recommended proportions as per IS: 9103. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Cement level 450 kg. Including providing and adding colour pigment as admixture of approved make.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work in Slabs, landing, lintels, shelves, Balconies and Cantilever upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.Including cost of admixtures in recommended proportions as per IS: 9103. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Cement level 450 kg. Including providing and adding colour pigment as admixture of approved make.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work in Beams, Plinth beam, Girders, Lintels and Cantilever upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel shuttering, strutting and propping etc. exluding cost of reinforcement. Using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.Including cost of admixtures in recommended proportions as per IS: 9103. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Cement level 450 kg. Including providing and adding colour pigment as admixture of approved make.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work in Stair and landing upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.Including cost of admixtures in recommended proportions as per IS: 9103. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Cement level 450 kg. Including providing and adding colour pigment as admixture of approved make.

Providing and laying in position Ready Mixed M30 grade concrete for reinforced cement concrete work in Foundation, footings, base of columns, pavement, grade slab, roads and Mass concrete including cost of Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.Including cost of admixtures in recommended proportions as per IS: 9103. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Cement level 475 kg. Including providing and adding colour pigment as admixture of approved make.

Providing and laying in position Ready Mixed M30 grade concrete for reinforced cement concrete work in Walls, from top of foundation level upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.Including cost of admixtures in recommended proportions as per IS: 9103. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Cement level 475 kg. Including providing and adding colour pigment as admixture of approved make.

Providing and laying in position Ready Mixed M30 grade concrete for reinforced cement concrete work in Columns, Fins, Pillars posts, Rectangular polygon in plan and struts upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of layingHeight of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.Including cost of admixtures in recommended proportions as per IS: 9103. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Cement level 475 kg. Including providing and adding colour pigment as admixture of approved make.

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of reinforcement.

Providing and laying and fixing 50 mm thick expansion joint by hydro cell semi rigid UV resistance with high performance laminated closed cell polythene foam joint filler in sheet foam as directed, etc. complete.

Providing material and labour for filling 25 mm thick joint with elastomeric joint sealant two component, high performance polysulfide formulation conforming to BS:4254 and ASTM C 920 having weathering resistance to ultra-violet rays and shall exhibit shore A hardness of 25 and have movement accommodation factor 25% including using of compatible primer of approved standard for at all floors, any lead and lift etc complete as directed by Engineer In charge.

Providing and fixing 150 mm wide Aluminum flutted strips 3.15 mm thick sheet covering over expansion joints with screws as per design.

Providing and Core cutting work in Stone/RCC/Brick structures of maximum 400mm depth upto 150mm Dia with required core-cutting wet drilling, fastners tools, labour and supervision etc complete.

Providing & laying weep hole in Abutments, walls and returns by using A.C. pipe of 100mm including laying in proper grade and jointing the completed as per detailed specification.

Providing material and labour for fixing chemical anchor medium to heavy duty injection adhesive for Anchor fixing in Dry conditions and HILTI HIT-HY 200 + HIT-V rods of size 16mm x 300mm of HILTI or equivalent as per drawing or as instructed by EIC. The system should be made of two foils consisting of resin and Hardener foil pack. The system can be used for threaded rods HIT-V rods or equivalent rods. The installation and the setting instructions should be strictly followed as per the manufacturers recommendations. Rate shall be inclusive of injection adhesive and fastner rod of same make.

Re baring work by drilling in Stone masonry/RCC wall and chemical grouting (with Hilti RE500V3 or Fischer FIS EM or Equivalent) as per manufacturer's specification upto 25 mm dia. drill hole and 450mm anchoring depth in stone wall. Complete all as directed by engineer in charge. (20mm dia rod shall be paid separately under reinforcement item) (The rate shall be for Working in Tidal conditions)(The rate shall be for Working in Tidal conditions upto height of 9m)

Providing material and labour for fixing in position PVC pipe sleeves 75-160mm Diameter - 6Kg/cm2 and length as per design for following diameters for services wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying etc complete for all floors, all height as directed by engineer in charge. Open ends of the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Pipe sleeve shall be removed before water proofing or grouting (at rain water down take location).

Supplying and fixing reinforced concrete heavy duty non-pressure NP3 pipes with collars/without collars as per IS 458-1991 specifications including setting the pipes in ground for tree protection. 600 mm dia

Reinforcement and Steel works Supplying cutting, bending, binding and placing in position Corrosion Resistance Steel TMT bars in all diameter Fe 500grade conforming to relevant I.S. standards as per ISS 2502 and IS 1786 including cost of steel and binding with GI wire in position complete upto floor two level (Brands: As per make specified in RFP document )

Steel works: Providing material and labour for fabricating, assembling, hoisting/ erecting and fixing in position at all heights/ all levels/ all floors/ all shapes & sizes with all leads & lifts using MS Rolled Steel Sections, ISMB, ISMC, UC, H-Section, Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes, Perforated Sheet, Flats, Bars, Angles, MS Sheet, Girder, Beam, cattle trap, deep threaded MS bolts. All confirming to latest relevant IS codes for the work of steel structures like staircases, railings, handrail, jali, gates, grills, bracings, platforms, brackets, monkey ladder, cattle trap, rungs, Roof canopy, fencing posts, M.S. Screen etc. including straightening, cutting, bending, bolting and welding the members including necessary scaffolding/ staging etc. complete and comprising of Profile Cutting, Smooth grinding/ machining of edges/ faces/ all welding joints; Necessary welding; Machine drilling of holes for joining/ anchoring; dry sanding, degreasing (wet cleaning) & preparation of rustfree surface manually or mechanically, metal putty to make the surface even and smooth. The Contractor shall prepare shop drawing as per GFC drawing and as per actual site condition and get approved before execution by EIC. (Standard measurements will be paid for as actual cut length used at site) . (The Makes of the Steel shall be like SISCOL / SAIL / TISCON / RINL/ Tulsyan/ TATA /JINDAL or as approved by Chief Technical Officer (CTO))

Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete.

Extra for additional lift of reinforcing steel for all R.C.C. work above floor two level.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4.0 mt. Between supporting floor two ceiling including temporary brick or stone pillars for supporting as required. (I) Height more than 4.0 mt & upto 5.0 mt.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Masonary, Stone and facade works Providing material and labour for laying Brick work using common burnt clay building Conventional bricks having crushing strength not less than 35 kg/SqCm in foundation and plinth in Cement Mortar 1:5 (1- Cement : 5 -fine sand) in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth level upto floor two level (B) Cement Mortar 1:5. (1- Cement : 5 -fine sand) in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth level upto floor two level and above floor two level (B) Cement Mortar 1:5. (1- Cement : 5 -fine sand) in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing material and labour for (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation, plinth and superstructure above plinth level upto floor two level, in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing material and labour for (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand )above floor two level in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Providing and fixing upto floor two level precast jali blocks extruded wire cut made with 100% red natural burnt clay with fair finish look including cleaning, fixing and finishing in cement mortar 1:3, curing and pointing works at all heights with necessary scaffolding etc complete as per direction of Engineer in charge. Shape of hollow part shall be round, square or rectangle and in pattern, provision of groove and pointing as per drawing, curing Contractor shall prepare mock up for one panel with approved block and as per satisfaction of Architect. Note: Payment should as per actual area of jali made, no deduction of hollow gap of block or wastage should be considered for payment. (Brand: Radha Krishna bricks, Banglore Tile Company, Wienerberger)

Providing and fixing upto floor two level precast fair finish exposed cement concrete jali blocks with fair finish quality of M25 concrete, cleaning, fixing and finishing in cement mortar 1:3 and curing complete including G. I. reinforcement/mesh. Shape of hollow part shall be round, square or rectangle and in pattern, provision of groove as per drawing, curing at all heights etc complete as per the drawing and direction of Engineer in charge. Contractor shall prepare mock up for one panel with approved block and as per satisfactiobn of Architect. Note: Payment should as per actual area of jali made out of hollow block, no deduction of hollow gap of block should be considered for payment.

Providing and Fixing 12 mm thick moisture & fire resistant heavy duty Cement Fibre Board (High pressure steam cured) Confirming to ISO 4862-2000 in wall panels of one face of cold formed galvanised light gauge steel frame structure to form wall / partition as & Where directed by Engineer-in-Charge (make: Birla Aerocon, Century Zykron)

Door Window and Signage works Providing and fixing frames/shutters/louvers for any type of aluminium works in door/window/partition made out of heavy weight extruded aluminium sections of approved make having minimum 50 micron pure polyester Powder Coated coating of approved shade, texture & colour for all floors, levels, heights, shapes, sizes including cutting, bending, crimping, fabricating in best workmanship manner etc excluding glass works as per the drawing and as directed by Architect or Engineer-in-Charge. Including 1) Sheet metal screws and casted solid aluminum corner cleats fixed with external byttins with a spring for rapid and secure joint assembly for casement and sliding shutter and frame; 2) Glazing clips for receiving infill panel; 3) Best quality wool pile and compatible EPDM rubber; 4) Dash Anchor fasteners of HILTI or equi. for fixing the frame at every 600 mm spacing. 5) 10mm GI tie rod for connecting vertical stile at top and bottom for aluminum door shutter and 4mm thick solid aluminium corner cleat of full thickness of section for connecting style and horizontal rails; 6) Providing and fixing packing (rough ground) in full periphery/ at every 600mm c/c with average 6 mm thick PVC spacer/ compact sheet of width (equal to section width less 30mm for backer rod and sealant); 7) Filling the gap between wall and frame on both sides (outside and inside) with polyethylene baker rod of avg. 10 mm thickness with silicon sealant . 8) Termite treated seasoned teak wood. 9)Zinc alloy powder coated touch lock with hook. 10) Zinc alloy body with single nylon roller (weight bearing capacity to be 40 Kg). Contractor shall prepare shop drawing based on concept drawing and get approved from the consultants before procurement of material including making of mock up for approval with all hardwares. Rate shall be inclusive of all material, labour, fixing, accessories except glass works.

Providing material and labour for fixing 6mm thick Clear Toughen Glass as per approved sample of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.

Providing material and labour for fixing 8mm thick Clear Toughen Glass as per approved sample of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.

Providing material and labour for fixing 12 mm thick Clear Toughen Glass as per approved sample of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.

Providing and fixing 5mm thk float glass pane frosted/plain glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): Actual installed quantity shall be measured and paid. Rate shall be inclusive of all type of wastage.

Providing and fixing 35 mm thick flush door filled with country wood with Indian Teak wood frame of 120x80 mm, water proof flush door single shutters with 1 mm thick lamination sheet on both sided (Make:Greenlam/Royale Touche/ Euro/ all sides of shutters) with lipping edging patti all around the door including using 2 Nos pull SS handles in satin finish of the size 25mm diameter, 30 cm long made from anticorrosive high grade AISI 316 stainless steel. Providing and fixing one number of 10 mm diameter 20 cm long anticorrosive high grade AISI 316 stainless steel tower bolt, four numbers of anticorrosive high grade AISI 304 stainless steel hinges of size 102 mm x 76 mm x 3 mm of the make KICH & anticorrosive high grade AISI 316 stainless steel aldrop of 10 mm diameter x 20 cm ( make ORBIT, Kich) in satin finish, with fixing SS heavy duty screws to the frame as approved by Engineer -in-charge etc. complete as per detailed drawing. ALL FLOORS

Providing and fixing 25 mm thick flush door filled with country wood, water proof flush door single shutters with 1 mm thick lamination sheet on both sided (Make:Greenlam/Royale Touche/ Euro/ all sides of shutters) with lipping edging patti all around the door including using 2 Nos pull SS handles in satin finish of the size 25mm diameter, 15 cm long made from anticorrosive high grade AISI 316 stainless steel. Providing and fixing one number of 10 mm diameter 20 cm long anticorrosive high grade AISI 316 stainless steel tower bolt, four numbers of anticorrosive high grade AISI 304 stainless steel hinges of size 102 mm x 76 mm x 3 mm of the make KICH & anticorrosive high grade AISI 316 stainless steel aldrop of 10 mm diameter x 20 cm ( make ORBIT, Kich) in satin finish, with fixing SS heavy duty screws to the frame as approved by Engineer -in-charge etc. complete as per detailed drawing. ALL FLOORS

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). No Weilding OR Fabrication shall be allowed at site. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Sample shall be approved before execution. Contractor shall arrange mock up of railing system (2 or 3 no) in required length as directed by Architect. Contractor shall protect railing system uptill handling over the project.

Providing & fixing Locks Godrej Mortice lock cover (with 3 sets of key) with all required tools and tackles, gaskets, screws in line and level at the height mentioned in the drawing, cutting and core the doors in exact dimensions, without damaging the shutter or frames up to the satisfaction of engineer in charge with Standard warranty of 1 year

Providing & fixing S.S. Pipe Handle of 30 Cm size of ASIS 316 Grade with all required tools and tackles, gaskets, screws in line and level at the height mentioned in the drawing up to the satisfaction of engineer in charge. (Brands KICH, OZONE AND ENOX)

Providing & fixing S.S. Pipe Handle of 10 Cm size of SS 304 Grade with all required tools and tackles, gaskets, screws in line and level at the height mentioned in the drawing up to the satisfaction of engineer in charge. (Brands KICH, OZONE AND ENOX)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (Brand Ozone, Kich, Enox)

Providing and fixing IS:12817 marked stainless steel butt hinges of 4x1x1" inches with stainless steel screws etc. complete in doors, windows, louvers as per drawings.

Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays 355x19 mm of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete.

Providing & fixing Louvers of Anodized aluminium sections as horizontal members at 75 mm c/c and 100 x 25 x 2 mm (Wt. 1.16 kg/m) aluminium vertical section 125x25X2 mm (Wt. 1.43 kg/m) with SS 304 Aldrop 20 cm long including fixing and erection on site and making surface good etc. complete as per design for doors/windows/ventilators.

Providing and fixing in position, interlocking rolling shutter of approved make, made of 18 gauge, 75mm wide cold rolled GI lath interlocked, including top cover (20 gauge), spring, axles (specially designed shaft), guide rails (10 gauge), tees, iron pulleys, ball bearings, handles, arrangement for inside and outside locking arrangement, with Mechanical Type (Gear Arrangement), holding down bolts embedded in CC 1:2:4 / anchor fastener of HILTI or equivalent including 1 coat of Rustocap and 2 coat of Hi-Gloss Metal PU Paint of approved make and shade over all the surfaces etc. as directed. (Measurements considered for payments shall be clear size of opening plus guide channels on both the sides for width and 450mm on top for drum height.)

Supply and installation emboss Acrylic letter signages with LED backlit with cover letter of 1" emboss fitting of any shape and size of lettering with GI boxing and support system. LED waranty of 1 year with black coated wiring . Including fabrication, transportation and installation charges at all heights and span as per instruciton of EIC.

Providing, making and fixing stand alone Pylon backlit signage with 3 mm thick ACP sheet covering and Acylic letter writing of any shape and size and of approved make to be cut on CNC router cutting and smoothen all corners and edges. Matter shall be cut in 3M High intensity prismatic Reflective vinyl ASTM Type 4 and paste on it as per design and detail and as per manufacturer's specifications. UV stabilized lamination shall be done on it. The ACP sheet shall be fixed with clamp and angle on MS Pole structure. Content of sign shall be letters (In Gujarati & English), graphics / maps, signs etc. in any colour as per design, drawing and approved by Architect and Engineer. All side of box shall be covered with fresh ACP sheet, but only written signage side elevation area shall be measured and paid in sqmt. Cost of MS Pole and Civil works shall be paid as per relevant tender items. The rate shall also include cost of scaffolding, drilling, fabrication, finishing, adhesive material, etc at all height and all lead, angle, fixing charges, etc. The contractor should submit the drawings based on concept design and do the sampling and get it approved before execution.

Providing, making and fixing wall mounted 150mm high, 450 lenght and 1mm thick SS 304 for signage painted with paint in Gujarati, Hindi and English languages and the font style as approved sample or as per design and drawings. It shall be made from ISI Brushed S.S. 304. It shall be fixed on the wall with chemical anchor fastener at any level any height. All Edges and corners shall be smoothened. Width of the letter shall as per the proportion of the word for depth. The rate shall be inclusive of scaffolding, drilling, adhesive material, screwing, stud fitting etc. complete for all heights.

Providing wood work in Trusses, Purling, Rafter, Post,Post Plates, wall plates and the like wrought framed, hoisted and fixed in position.

Providing and fixing wooden planks ceiling with tounged and grooved jointing and wood screws (frame work and cover fillings to be measured and laid for separately) (A) Indian Teak wood (iii) 25mm thick

Plaster and Paint works Providing throating or plaster drip groove 10 x 10 MM and moulding to RCC chajja and horizontal surfaces.

Providing and carrying out Washed stone /peeble grit plaster on exterior walls height upto 16 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1cement : 4 coarse sand ), furrowing the under layer with scratching tool,applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone/pebble chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings in all colour, proportions and mix of Grit/stone chips, complete as per specification and direction of Engineer.

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone/pebble grit plastered surface as per approved pattern, including providing and fixing aluminium channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove iincluding removal of channel if required, complete as per specifications and direction of the Engineer-in-Charge.

Providing material and labour for fixing G.I. hexagonal chickenmesh of size 16mm x 24mm of 22 gauge at junction of concrete and brick work or between different materials after making "V" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of surfaces including necessary "U" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes as per direction of Engineer-in-charge.

Providing and applying 10mm thick cement plaster in single coat plastering on ceilings and sofits of stairs upto all levels/floors (i)Cement mortar 1:3 (1-cement:3-sand) including finishing with a floating coat of neat cement slurry, scaffolding, curing, finishing, making grooves, forming pattas etc. complete as directed by the Engineer-in-charge.

Providing and applying 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick/ AAC blocks walls for plastering upto all levels/floors and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand). Including scaffolding, curing, finishing, making grooves, forming pattas etc. complete as directed by the Engineer-in-charge.

Providing and appying 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Including scaffolding, curing, finishing, making grooves, forming pattas etc. complete as directed by the Engineer-in-charge.

Providing and applying Wall painting (two coats) with plastic emulsion paint of approved brand having VOC (Volatile Organic Compound) content and manufacture on undecorated wall surface to give an even shade including required scaffolding, thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.( make Asian, Berger, Dulex, Nerolac)

Providing and applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including required scaffolding, thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Providing material and labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete inluding required scaffolding. (make: Asian, Berger, Dulex, Nerolac)

Providing material and labour for applying Epoxy based Paint for Metal works on new/ existing metal surface af including including cleaning and removal of all dirt, grease, varnish, paint or any other foreign matter. Hereafter surface sanding before and after the paint to provide seamless aesthetic look complete as per the instructions with proper tools and sanding and wire brushing. First application of 2 coats of mixed red oxide zinc chromate primer of approved brand paint to be applied and there after application of putty works and sanding work, thereafter application of 2 coats of epoxy base paint finish. Sample to be approved before starting of the work by Architect/ EIC. Rate shall be inclusive of the cost of scafolding. (Brands: Asian paint Apcolite Epoxy, Berger, Dulex, Nerolac)

Providing and applying Hot dip Galvanised coating confirming to Indian Standard 4579/2629/2633 with zinc coating thickness to be 86 micron and before application of GI coating the material should be free from all dirt, grease, varnish, paint or any other foreign matter. Including touching of local exposed areas with Zinc metal spray paint with 2 coats to make the structure corrosion free with cleaning thoroughly the applied surface making it free from grease, paint or any other foreign matter , sanding the surface before and after the paint to provide seamless aestheic look complete as per the instructions of the EIC including transport/loading/unloading the materials at plant for HDGC work

External wood paint: Providing and applying Deluxe Multi Surface PU paint of transparent shade with 2 or more coats on new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing transparent undercoat. (Brand: Asian paint, Nerolac)

Providing and laying coloured glazed tiles 8-10 mm thick of the size 300x 300 mm / 300x 450 mm / 300x600mm in skirting, risers of steps and dado on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. (make Johnson, Kajaria, Asian, RAK, NITCO).

Waterproofing and Roof works Providing and Laying broken China mosaic flooring for terrace using 12 to 20 mm broken pieces of only white glazed tiles (Bell/ Somany/ Johnson/ kajaria/ Cera/ Spartek/Orient / Nitco) to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar cream out up to surface using white cement including off junctions and extending them up to wall top, curing with water and cleaning with oxalic acid etc as directed.

Providing and laying integral cement based water proofing treatment conforming to IS: 2645 for treatment of roofs, balconies, terraces etc: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brickbats 25 mm to 115 mm size with 50% of cement mortar 1:5 admixed with water proofing compound over 20 mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound to required slope and treating similarly the adjoining walls upto 300 mm height rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in- charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) Curing terrace with water flooded for min. 2 weeks. All above operations to be done in order and as directed and specified by the EIC with average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscosity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and applying integral crystalline slurry of hydrophilic For vertical surface two coats @ 0.70 kg per sqm in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, floor slabs, water tanks, roof slabs, toilets, sunk slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage.

Providing and applying integral crystalline slurry of hydrophilic For horizontal surface one coat @1.10 kg per sqm in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, floor slabs, water tanks, roof slabs, toilets, sunk slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage.

Providing cement vata (10 cm X 10 cm size) quarter round in Cement Mortar 1:1 including neat cement finishing, watering etc complete

Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T"runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as directed by Engineer in charge.

Flooring works Providing and laying cement mortar in 1:6 (1-Cement : 6-coarse sand) proportion.

Providing and laying 25 mm thick chisled/natural finish Kota stone machine cut flooring over 20mm thick base of cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M. 1:1.5 including pointing with cement mortar 1:2 (1-cement : 2-stone dust) etc. complete. (A) 25 mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dado and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. Sample shall be approved before execution. Kota stone shall be in uniform shade of required size. Sample and mockup shall be approved before procurement of material.

Providing material and labour for laying average 25mm thick Riverwashed Green Kota stone slab in flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including curing, rubbing and polishing at all floors any heights, any lead and lift in any shape and pattern etc complete as directed by Engineer In charge. Sample shall be approved before execution. Kota stone shall be in uniform shade of required size. Sample and mockup shall be approved before procurement of material.

Providing and laying Riverwashed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : a. Flamed finish granite stone slab Jet Black, Steel grey, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying POLISHED Granite stone 25mm thk flooring/wall in required design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineer-in-Charge : Colour Jet Black, Cherry Red, Steel grey, Elite Brown, Cat Eye or equivalent.

Providing and fixing 18mm thick Granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for wall cladding,plaforms, vanity counters, window sills , facades, in linear as well as curvilinear surfaces and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:2 (1 cement : 2 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Including fixing granite stone, over and above corresponding basic item, in facia, wall cladding and drops with chemical adhesive, including cleaning etc. complete. For all wall Caldding and Copping work also as per drawing including all colour and texture. (Brand for Adhesive:MYK Laticrete, Weber,Kerakoll)

Providing Edge moulding upto 25 mm thick Granite/Kota/ other stones counters, Vanities, steps/ riser etc., including machine polishing to edge to give high gloss finish etc.including wastage,rubbing, cutting, curing and polishing etc complete as per design approved by Engineer-in-Charge.

Providing and laying double charged Antiskid vitrified tiles in floor (thickness to be specified by manufacturer) with residue of approved make and shade as per drawing with water absorption less than 0.08% and confirming to IS: 15622, laid over 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) bedding of approved make, in all colours and shades. Finishing shall be done with pointing the joints with grey cement slurry at 3.3kg/sq m including grouting the joints with white cement and matching pigment, including curing, cleaning with mild oxalic acid, maintaining till handling over by covering with plastic sheet etc complete for all floor all height as directed by Engineer-in-charge. (Brands: Johnson, Kajaria, Asian, RAK, NITCO)

Extra for providing material and labour for Grouting the joints of any type of flooring tiles of Size upto 600mm having joints of 3mm width and in full depth, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade and approved make (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge.

Providing and fixing 10x10x7.5 cm Granite Cobble stone block hand cut, rounded edges as required and chisel dressed on top, for paving in floors, drains etc. laid over cement mortar 1:4 (1cement:4 coarse sand) with bedding of average 20mm thickness, floated with thick and neat cement paste mixed with approved pigment to match the shade of the stone including dressing, rubbing, curing, rounded edges, wedge, tappering, cleaning etc. No extra amount will be paid for residues to be used to achieve the pattern). All top sides of stone to be 25mm deep machine cut to achieve best edge quality and as design. . Colour Jet Black, Steel Grey, Cherry Red, Elite Brown, Cat Eye, Dark grey, yellow, white or equivalent.

Providing and laying 40mm thick marble/granite chips flooring rubbed and polished (I.E. terrazo) to granolithic finish with under layer 30mm thick cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 10 mm and down gauge) and top layer 10mm thick with white, black or white and blak marble cihps of required sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3-Cement : 1-Marble powder by weight) in proportion of 4:7 (4-Cement :7-marble chips by volume) (B) Light shade pigment with white cement (In top layer only). Including placing of Aluminium/Glass withing joints.

Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. (Brands Pavit, Somany, Equivalent)

Providing and laying Tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.

Road and kerbing works Providing, laying, spreading and compacting 200 mm thk. graded stone aggregate material in sub base course including mixing in a mechanical mix plant at OMC , carriage of mix material, spreading in uniform layers with motor grader for sub base including spreading of stone dust to fill up voids on the surface and watering compacting with vibratory roller to achieve CBR value not less than 30 as per MORTH and the desired density (as per designed mix determined density) including all materials, labour, machinery.etc completed.

Providing and Laying of wet mix macadam of using machine crushed chips as per required gradation mixing with required optimum quantity of water conveting the mix to site and camber with mechanically paver, consolidation with vibratory road rolling including materials. etc completed as directed by Engineer In charge.

Construction of un-reinforced, dowel jointed, plain cement concrete pavement of M30 Broom Finish or stamping texture of flooring pattern over a prepared sub-base with 30 grade cement @390 kg per cum, coarse and fine aggregate conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of contraction, vaccum de-watering, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, deboning strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawings. To be laid in alternate panels size apprx 4.5mt X 4.5 mt with fair finished steel channel formwork.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete, including corner, quadrants, angles, radius, dropper kerbs in all shapes. (Brands: Vyara, Alcock, Basant Betton)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Informatory Signs :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 80 x 60cms. rectangle as per the design of IRC-67-1977 pre treated with phospheting process & acid teching; coated with one coat of epoxyprimer and two coats of best qualityepoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm75x75x6mm as required; painted with best qualityepoxy coatings in black and whitebends. the details of symbol for eachboard shall details of symbol for eachboard shall be as per the instruction ofengineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x45 x 60cms. for each leg. including excavation curing tec. complete under the supervision of engineer in charge.(B) High Intensity Grade.

Parking Signs :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 60 x 60cms. sequare plus 60 x 20cms rectangular additional plate as as per the design of IRC-67-1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. the details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(B)High Intensity Grade

Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction high compressed molding with reflector made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) provided with bituminous adhesive 100g. with each unit for fixing. (High Intensity grade)

Painting lines, deashes, arrows, letters etc on roads, Air fields and like in two coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. (i) Over 10cm in width

Street furniture works Providing and fixing Precast Concrete Cylindrical bollard of 450mm dia x 1000mm height as single cast mono element with Sand blasted Texture finish made of Full Depth pigmented mix High Performance GlassFiber Reinforced Concrete 12 MPa flexural strength and 40MPa Compressive Strength, UV resistant stabilise colour pigment, colour as per Architects choice including fixing, cleaning surfaces and complete and including cost of loading -unloading and placing with crane. (Brands AryaPrecast, The concrete shop)

Providing and fixing Precast GFR Concrete designer backless bench of 1500x450x450 LBH & 100 mm thickness single cast mono element with terrazzo smooth finish made of Full Depth Terrazzo mix High Performance GlassFiber Reinforced Concrete 12 MPa flexural strength and 40MPa Compressive Strength, UV resistant stabilise colour pigment, colour as per Architects choice including fixing, cleaning surfaces and complete and including cost of loading -unloading and placing with crane. (Brands AryaPrecast, The concrete shop)

Providing and fixing Precast GFR Concrete Modular backless Cube Seating bench of 450x450x450 LBH & 100 mm thickness single cast mono element with terrazzo smooth finish made of Full Depth Terrazzo mix High Performance GlassFiber Reinforced Concrete 12 MPa flexural strength and 40MPa Compressive Strength, UV resistant stabilise colour pigment, colour as per Architects choice including fixing, cleaning surfaces and complete and including cost of loading -unloading and placing with crane. (Brands AryaPrecast, The concrete shop)

Providing Precast Concrete dustbin of 600x600x1000 LBH single cast mono element with terrazzo Texture finish made of Full Depth Terrazzo mix High Performance GlassFiber Reinforced Concrete 12 MPa flexural strength and 40MPa Compressive Strength, UV resistant stabilise colour pigment, colour as per Architects choice including fixing, cleaning surfaces and complete and including cost of loading -unloading and placing with crane. (Brands AryaPrecast, The concrete shop)

Providing and fixing 4/6mtr. Boom barrier - AC Motors (Assembled Make) 4/6 meter / 6 sec double spring (HEAVY DUTY) 220 V AC +/- 13% / 50hz / 120 watts, with housing box, control PCB (aluminium hollow sections (4 to 6 meter long / hexagonal shape 100mm x 44 mm, telescopic type with reflectors; Push Button for activation complete with testing (Brands Swaraj secutech, New tech automation)

Providing and Fixing Bicycle stand made from Stainless Steel 316 of 875x790mm length, 50 mm pipe dia and wall thickness of 1.5 mm with Glossy/ Matt finish, high quality grade including bending, by CNC hydro-pneumatic bends and fabrication including cutting, facing, wielding, finishing, buffing , finishing in any shape and curvature with excavation and fixing in position, line and level complete as per EIC- High quality grade. (Brand Cheveron Inc)

Tree pit cover - Providing and fixing precast tree pit cover around the tree pit, factory made CHECKERED Tree Grates of material Cast Iron, Size 1200 x 1200, 15 mm thickness , Clear Opening Diameter 400mm. including transporting, loading, unloading fixing etc. complete. The rate shall also include for erecting and fixing the pieces in position with necessary equipment without any damage. (Sample to be approved) (Brands: chevron, Vyara, Alcock)

Horticulture works Excavation pits of 60 cm. x 60 cm. x 60 cm. size at specified spots.

PLANTING TREES AND SHRUBS : After excavating pits of the size 60 cm x 60 cm x 60 cm. refillings the same by providing and mixing Farm Yard Manure at the rate of 0.06 cu.m per pit , providing and planting well grown sapling of specified variety and maintaining till well established.Tree height 2.5 to 3 feet and Shrub height 1.5 to 2.0 feet.Bag size 8'x10' (about 45 days) complete.

Complete maintenance of the landscape areas/ entire garden for 5 years features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge including lawn mover and brush cutter with fuel and other T & P material/articles and as per direction of officer in charge. (1Mali for 2.00Acre).

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete.

LAYING OUT LAWN: Preparing soil for planting by supplying and mixing Farm Yard Manure at the rate of 5 cu.m per 100 sq.mt area, providing and planting suckers of pure dharo (doob) grass roughly at 10cm x 10cm. distance and maintaining till well established etc complete (about 45 days).(Item No-5)

Supply AZARDIRACHTA INDICA (Kadvo limdo) of Bag size 18"x18"

Supply LAGERSTROMIA FLOSREGINA (Pride of india) of Bag size 13"x13"

Supply MIMISOPS ELENGI (Borsalli) of Bag size 13"x13"

Supply PLUMERIA ASSORTED VARITIES (Champa) of Bag size 18"x18"

Supply SAMANEA SAMAN (Rain tree) of Bag size 18"x18"

Supply SPATHODEA CAMPANULATA (Spathodea)of Bag size 18"x18"

Supply JAMOON (BLACK) (Paras jambu) of Bag size 18"x18"

Supply ALLAMANDA NERIFOLIA of Bag size 7"x8"

Supply DURANTA GOLDIANA (Golden duranta) of Bag size 7"x8"

Supply HEMELIA DWARF of Bag size 7"x8"

Supply JASMINUS SAMBAC(butt mogra double flower)(Butt mogra) of Bag size 7"x8"

Supply MURRAYA EXOTICA (chameli shrub)(Madhukamini) of Bag size 7"x8"

Supply NERIUM OLEANDER VARIEGATED of Bag size 7"x8"

Supply PANDANUS VARIEGATED (Kevdo) of Bag size 7"x8"

Supply BOUGAINVILLEA VARIEGATED of Bag size 7"x8"

Supply HIBISCUS ORANGE DOUBLE (orange)(Jasud) of Bag size 7"x8"

Supply ENGLISH ROSES MIX VARIETIES of Bag size 13"x13"

Supply RHAPHIS EXCELSA(Rhaphis palm) of Bag size 13"x13"

Demolition and Dismantling works Demolition including stacking of serviceable materials and disposal or unserviceable materials at nonobjectionable place with all leads and lifts including cutting the reinforcement, and finishing the broken surfaces to match with the surroundings etc. complete : RCC Works.

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) P.C.C. work

Demolition of Brick Work/AAC block work with plastered surface/ wall dedo including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Dismentaling tiled of stone floors/ wall tiles laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Dismentalings any type of ceiling or partition walls, wooden trellies work including grid and suspension system with all elements stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Dismentling steel work including distempering and stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area.

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.

Dismantling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing.

Dismantling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet roofing.

Dismantling Manglore country tile roofing with battens boarding etc. including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth

Dismentling/ removal Charges of existing LED Street Light/ telephone Fixtures of various wattages with Bracket & Street Light Pole including excavation and dismantling of foundation concrete and lines,carring & handling charge for shifting under the supervision of concerned department, to proper place as specified and directed by the dept. disposal with all lifts and up to all lead and lift, stacking the serviceable and unserviceable material separately.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer-in-charge. Max. size 120x90x90 cm deep.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

PLUMBING WORKS COST Sanitary Fixture & Fittings (As per make/Model specified in RFP document) Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.

Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet.

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour

Providing and fixing 12.5 Litres high level C..I. flushing cistern with A pair of C.I. or Mild steel brackets, womplete with fittings such as syplionic arrangement, 15mm nominal size brass ball valve with polythene float, lever G.I. China (60 cm. ) and pull union and couplings for connections with inlet, outlet and overflow pipes etc. including cutting holes in walls and making good the same (overflow pipe to be measured and paid fo separately )

Providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors.

Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing toilet paper holder.(A) C.P. Brass

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm.

Providing and fixing Rubber plug for sink or wash basin.

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing screw down 2-way bib cock of following size. Brass chromium plated 2-way bib cock (i) 15 mm.(Make: Hind ware/cera/jaguar/Grohe)

Concealed Urinal sensor: Supply and installation of sensotronic concealed type Flushing Valve for urinal complete set with installation box with control cock including all consumable, tools, tackles, labour etc all complete as directed by the Bank. (Make: Kohler, Jaquar, Hindware, Parryware or Equivalent)

Providing and fixing Angle tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. (Make: Hind ware/cera/jaguar/Grohe)

Providing and fixing 450mm Long Braided Hose pipe with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Wash Basin, Kitchen Sink etc.) of approved make and conforming to Manufacturers Standards.

Supply, storing, installation and testing twin coat hook, fixed to wall / door with concealed CP screws etc. complete. (Make: Hind ware/cera/jaguar/Grohe)

Providing and fixing of grab bars 300 mm Stainless steel in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC.(Make: Hind ware/cera/jaguar/Grohe)

Providing and fixing of grab bars Vertical Swing 18-8 S, type-304, 18-gauge (1mm) stainless steel tubing with satin-finish. 1–1/4 (25mm) outside diameter wall mounted in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC.(Make: Hind ware/cera/jaguar/Grohe)

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, pre filter housing with 'O' ring pre sediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. [B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank

Water Supply Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. 65mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. 80mm.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(Ac Drain)

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(Ac Drain)

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. (Ac Drain)

Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: 20mm diameter (Make:ZOLOTO/VTC/SANT)

Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: 25mm diameter (Make:ZOLOTO/VTC/SANT)

Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: 32mm diameter (Make:ZOLOTO/VTC/SANT)

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of PN 10 and 50 mm diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of PN 10 and 80 mm diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Supplying, Installing, testing & Commissioning in position electrically operated level sensor based 32mm diameter solenoid valve with level electroeds for water tank inlet as shown in drawing & specified in specifiaction including weather proof housing,control panel, isolator, cables, accessories etc complete.Item including all accessories for satisfactory installation complete

Providing erecting and fixing double coated SIntex or equivalent PVC. (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. (Make: Sintex / Kaka )

Providing and fixing, 20 mm. dia. UPVC hydrant, for gardening, at required distance, with 20 mm. dia. ball valve of approved make, as recommended or equivalent and UPVC(SCH-80) pipe piece to provide the hydrant, up to main line connection, with angle & bsae plate support having size 40 X 40 X 6 mm support and 100 X 100 mm base plate, including excavation and PCC for bsae plate and all supporting fittings, making connections with main lines, specials, if required etc. complete with note board "NO DRINKING WATER", as directed.(Make:ZOLOTO/VTC/SANT)

Providing & Fixing of factory made Precast Chamber, having size (in to in) of 300 mm (L) X 300 mm (B) X Height: 300 mm T-5 load carrying capacity - 4.8 T Axle Load - 2.4 T Wheel Load, meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 /Fe 500 D shall be used for reinforcement. The contractor shall prepare & provide the base using PCC/Foundation concrete as a levelling course as per drawing / as recommended by the consultant depending upon the foundation soil strata. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation.Hole should be provided at site (No Factory) for connection at the waffle side of chamber as per the site requirement.The Precast cover having size 450 x 450 X 120 mm thick, designed for T-5 load carrying capacity - 4.8 T Axle Load - 2.4 T Wheel Load, meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 / 500D shall be used for reinforcement. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge. (For Garden Hydrant Use Only.)

Preparing structural design of RCC Under Ground / Partially under ground /above high ground level Reservoir and constructing of required capacity as per relevant I.S. standards in M30 concrete grade with HYSD Fe 500D reinforcement and constructing the same, including excavation in all types of soil strata (including rock) including shoring strutting if required, for loose soil / to protect from collapse, casting 100 mm thick P.C.C. levelling course in M-15, Refilling the pit with proper soil and disposing of the surplus stuff at all lead. Including cement plaster in CM 1:2 with approved water proofing compound to all over inside container (i.e. walls, base, top slab/dome bottom etc. all). Including Soil testing. Including all types of labour and material charges of lowering, laying, erecting / hosting and jointing of pipe assembly to inlet, outlet overflow, washout and bye pass arrangement as per hydraulic design. Providing and fixing accessories, CI Manhole frame and cover, water level indicator, adequate cowl type ventilators or lantern type ventilator with stainless steel jail. RCC chambers for valves. Providing and applying three coats of cement paint / snowcem to the out side face of structure. It also includes satisfactory water tightness test as per relevant I.S. code and painting name of scheme and capacity on the tank as per direction of engineer in charge.

Internal Drainage Providing, laying and jointing in true line and level 40mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, laying and jointing in true line and level 50mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, laying and jointing in true line and level 110 diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, fixing and testing PVC Deep seal P-Trap of 110 X 110 mm dia diameter, with necessary distance piece of 75mm dia pipe and 150 x 150mm heavy duty PVC three piece grating, making necessary holes and cutting in Slab/Walls, etc complete as per engineer in charge. (Make: prince/ supreme / astral / finolex)

Providing, fixing and testing PVC Height Riser with wings of 110 X 50 X 40 mm dia diameter, with necessary suported accessories, making necessary holes and cutting in Slab/Walls, etc complete as per engineer in charge. (Make: prince/ supreme / astral / finolex)

External Drainage Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete.(ID 150 mm diameter)

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and specials of 160mm diameter including cost of conveyance from stores to site of works including cost of labour, material, cement solvent, giving satisfactory hydraulic testing as per ISI code.

Excavation for foundation/utility services upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lift.(E) Hard Rock

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. (Ramping by manual or mechanical means)

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete.(ID 200 mm diameter)

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete.(ID 300 mm diameter)

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type (make-Local )

Providing and fixing, best Indian make 1st quality, salt glazed PVC Sewer (intercepting) trap, of 150 mm. x 150 mm. size with cleaning eye cap and metal stopper chain, set in CC 1:2:4 etc., complete in last manhole including vent / fresh air pipe.

Providing & Fixing of factory made Precast Chamber, having size (in to in) of 600 mm (L) X 600 mm (B) X Height: 600 mm T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500 D reinforcement. The contractor shall prepare & provide the base using PCC/Foundation concrete as a levelling course as per drawing / as recommended by the consultant depending upon the foundation soil strata. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation.Hole should be provided at site (No Factory) for connection at the waffle side of chamber as per the site requirement.The Precast cover having size 744 x 744 X 140 mm thick, designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500D reinforcement. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, including making cut-outs, core cutting for utility ducts as per approved QAP as by Engineer In charge.

Providing & Fixing of factory made Precast Chamber, having size (in to in) of 800 mm (L) X 800 mm (B) X Height : 800 mm T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500 D reinforcement. The contractor shall prepare & provide the base using PCC/Foundation concrete as a levelling course as recommended by the consultant. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation.Cut out holes hole should be provided for utility connection as per the requirement.The Precast cover having size 944 x 944 X 120 mm thick , designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500D reinforcement. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge, including making cut-outs, core cutting for ducts. Brand: Fuji Silvertech, and equivalent.

Extra rate for every 200 mm additional depth of precast manhole of size 800x800

Providing & Fixing of factory made Precast Chamber, having size (in to in) of 1000 mm (L) X 1000 mm (B) X Height: 1000, mm T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 /Fe 500 D shall be used for reinforcement. The contractor shall prepare & provide the base using PCC/Foundation concrete as a levelling course as per drawing / as recommended by the consultant depending upon the foundation soil strata. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation.Hole should be provided at site (No Factory) for connection at the waffle side of chamber as per the site requirement.The Precast cover having size 1144 x 1144 X 150 mm thick, designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 / 500D shall be used for reinforcement. Cover should have conical shape of 50 mm to 30 mm respectively for storm water intake. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge.

Extra rate for every 200 mm additional depth of precast manhole of size 1000x1000

Construction of Manhole chambers 1300mm X 1300 mm and depth 1.0 m in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works but excl. cost of excavation and refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover (excl. cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6

(IV) Extra rate for constructing B.B. masonry for every additional depth of 1.0M. or Part thereof over item No. 66 for depth above 1.0M.

Providing and fixing C.I. cover with frame (Medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg.

Providing laying (to level or slopes) and jointing reinforced concrete pipe Light duty non-pressure pipes I.S. class NP3 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(D) 300mm (upto 10 ton) (Local Make)

Supplying & fixing hot dip galvanized channel steel grating 300 mm wide & 1000 mm long (inside dimension) fabricated from MS flat bar 25 mm wide 3 mm thick, weight of grating per meter shall be not less than 4.1 kgs, including with grating angle supports having size of 30 X 30 X 5 mm, weight of the angle per meter shall be not less than 2.8 kgs, complete as specified site engineer in charge.

Providing & fixing of F.R.P Gratings ( Light Duty) 206 mm wide & 1200 mm long (Outside dimension) for channel drains, including with all necessory accessories complate as per engineer in charge.

Providing & fixing of F.R.P Gratings ( Light Duty) 326 mm wide & 1200 mm long (Outside dimension) for channel drains, including with all necessory accessories complate as per engineer in charge.

Rain Water Internal Drainage Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (Type A) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 110 mm diameter U.P.V.C (Type A) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (make: Asirvad/ prince/ supreme / astral / finolex)

Providing, Fixing, Installation and Testing of 100mm rainwater outlets 2HP-2W/3HP-2W/ 4HP-2W* are to be ACO Building Drainage HP Two-Way screw outlets with locked flat grating supplied by ACO Building Drainage SG17 5TE. All components to be manufactured from grade LM6 aluminium alloy to BS 1490/ gun-metal to BS EN 1982. complete as per site engineer in charge.

Providing and fixing, PVC cowl, 75mm diameter on PVC ventilating pipes and verticals for soil and waste Pipes at top level / terrace level, as specified and required, etc. complete.

Rainwater filter made out of ABS plastics material, designed to operate ongravity of rainwater from roof through down pipe, having inlet (id) of 110 having diameter of not less than 90 mm and heightt not less than 500 mm with cap of not less than 70 mm heightt with two holes of not less than 10 mm on cap as a safety feature. Element must have back wash cap at bottom for cleaning dried particles. Filter must have flush outlet of not less than 60 mm moulded opposite to inlet connection. Flush valve must be supplied along with filter. Rainwater filter must be manufactured from injection moulding process, blended with uv stabilizers. Rainwater filter’s width to be not less than 400 mm, depth to be not less than 140 mm and heightt must not be less than 600 mm overall. Moulded projection to be given at bottom to fix on wall and a clamp to fix at top.(make:Vardhman’s)

Providing, fixing, testing and commissioning ACO Surface drain Channel 118 mm wide and 55 mm depth polymer based drain channel with CI Bar Grating 0.5Mtr C Class-250 Load with Galvanised edge rail for improved installed strength.

Providing & Fixing of factory made FUJI SIlvertech or equivalent precast(DUSD) U shape surface storm water drain having size of 450 mm width x 450 mm height into in dimenson from top, having units of2000 mm long, T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load confirming to JIS having high performance self-compacting concrete of M40 Cylinder Strength/ M50 Cube Strength & Fe 500 / Fe500D shall be use for reinforcement. The product shall have tie shape joint 10-20 mm width X 25 mm depth groove as per JIS on both sides of each Storm water drain for jointing two precast drains using cement mortar or suitable non shrink grout. The precast Storm water drain must consist of special in built inlets at appropriate location for fixing De-shackle for mechanical installation , including supply ,transportation ,installation on specific location at site in line ,level , gradient and plumb with necessary testing commissioning etc complete as per instruction of engineer in charge. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer incharge.

Providing & laying factory made FUJI Silvertech or equivalent Precast Lid having length of 500 mm, width suitable for placing on U - Shape Drain (DUSD) sizes 450 x 450 thickness of 130 mm. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/ Fe500D shall be used for reinforcement. Lid should have antiskid finish at Top.The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water intake.Each Lid may have in built specially design inserts of appropriate load carrying capacity arrangment and fixed at specific location to avoid the tilting of the lid for safe & fast installation. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer Incharge

Providing & laying factory made FUJI Precast Perforated Lid having length of 500 mm, width 902 mm suitable for placing on U - Shape Drain (DUSD) sizes 750 mm x 750 mm (in to in) thickness of 150 mm respectively. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/ Fe500D shall be used for reinforcement. The Perforated lid unit should have 20 slits each of 120 mm X 20 mm slit for storm water intake.Each lid may have in-built, specially designed lifting inserts of appropriate load carrying capacity and fixed at specific location to avoid the tilting of the lid for safe & fast installation. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge.

Providing & laying factory made FUJI Silvertech or equivalent Precast Lid having length of 500 mm, width suitable for placing on U - Shape Drain (DUSD) sizes 750 x 750 thickness of 250 mm. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/ Fe500D shall be used for reinforcement. Lid should have antiskid finish at Top.The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water intake.Each Lid may have in built specially design inserts of appropriate load carrying capacity arrangment and fixed at specific location to avoid the tilting of the lid for safe & fast installation. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer Incharge

Sock Pit and Septic Tank (B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (up to 10 ton)

C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )(Local Make)

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc. complete.

Pump Room Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 50 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)

Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 80 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)

Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 100 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)

Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 150 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)

Providing and fixing electronic type level indicator for water tanks mounting in panel with level display, alarm (level low or high), and manual reset for alarm, potential free set point contacts etc. complete with electrical wiring to probes and all accessories complete the work. Provision to connect to the building Automation system or pump controller through a suitable port.(Make: Wilo)

Supply of Submersible single stage single entry pumps connected to submersible motor (The motor shall be watertight according to IEC class IP 68, and incorporate class F insulation materials to withstand a continuous operating temperature of 155 deg C) for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with Double mechanical seal, pump connector unit with rubber diaphragm and bend, electrical panel with in built level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain or guide rail. (Pumps shall be installed in a set of two pumps One working and One standby, with cascade operation).Pumps suitable to handle solids upto 40 mm size with C.I. body, SS304 impeller & SS shaft with 10 mtrs cable, double mechanical seal.Electrical Starter panels complete with Over load & Under Current Relay with Single phasing preventer feature,ON-OFF and Trip Indicating lamps, contactors contacts for BMS System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level, cascade operation, working / standby slelction, etc.including with discharge valve and NRV, suitable for the motor H.P. as specified below. As per complete company Fitted and tested system Capacity per pump - 1.39 LPS [5 m3/hour], System Flow - 2.78LPS [10 m3/hour], Head:- 18-20 mtr. 2 Nos. Pumps (1 Working + 1standby)

Supply, installation, testing & commissioning of Submersible Open well single stage single entry pumps with C.I Casing, C.I Impeller and SS Body SS-304 Shaft,connected to TEFC submersible motor for 415 + 10% volts, 1 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, electrical panel with in built level controller with operational mode as pump working at low level, as well pump at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail & G.I. heavy class rising main of 1.0 m length including interconnecting piping, valves (Ball Valve / Butterfly), Non return valves (GM/CI) 15 m cable etc. as per requirement complete in all respects. (Pumps shall be installed in a set of One pump operation).Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors contacts for Building Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level, cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below and with provision for remote P.B. on/off complete as required. The on/off operations for all pumps shall be available on central BMS system Capacity per pump - 1.11 LPS [4 m3/hour], System Flow - 2.22LPS [8 m3/hour], Head:- 25-30 mtr. 2 Nos. Pumps (1 Working + 1standby)

Percolation Well Boring holes 3.5m deep in all type of soil,hard rock (for cast in situ piles) and getting out the soil and disposal of the surplus excavated soil as directed within a lead of 50 Meter for following diameter of pipes.(iii)300 mm

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-incharge (150 mm nominal size dia)

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over the existing gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling charcoal of size range 3.0 mm to 5 mm in recharge pit, in required thickness over the existing coarase sand layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, in required thickness over the existing charcoal layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling stone boulders of size range 5 mm to 20mm, in recharge pit, in the required thickness over the gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.

FIREFIGHTING WORKS Fire Pumps Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. Fire Pump as per requirement having a capacity of 1620 LPM at 70 meter head.

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.Fire Pump as per requirement having a capacity of 1620 LPM at 70 meter head.

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.Fire Pump as per requirement having a capacity of 180 LPM at 70 meter head.

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.Fire Pump as per requirement having a capacity of 900 LPM at 35 meter head.

Pipe Works Providing, laying, testing & commissioning of 25 mm diameter 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 32 mm diameter 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 40 mm diameter 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 50 mm diameter 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 65 mm diameter 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 80 mm diameter 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 100 mm diameter 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 150 mm diameter 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing laying, testing & commissioning of 200 mm diameter 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.

Valves & Accessories Supplying, fixing, testing and commissioning of 40 mm diameter butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gasketsconforming to IS 13095 of following sizes as required :

Supplying, fixing, testing and commissioning of 50 mm diameter butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gasketsconforming to IS 13095 of following sizes as required :

Supplying, fixing, testing and commissioning of 65 mm diameter butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gasketsconforming to IS 13095 of following sizes as required :

Providing and fixing 80 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation

Providing and fixing 100 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation

Providing and fixing 150 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation

Providing, installation, testing and commissioning of 40 mm diameter non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Providing, installation, testing and commissioning of 100 mm diameter non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Providing, installation, testing and commissioning of 150 mm diameter non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Providing, installation, testing and commissioning of 150 mm diameter stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

Providing, installation, testing and commissioning of 40 mm diameter Neoprene based flexible connectors shall be of the single- or double-sphere molded joint configuration and shall meet specifications of the Rubber Expansion Joint Division.

Providing, installation, testing and commissioning of 50 mm diameter Neoprene based flexible connectors shall be of the single- or double-sphere molded joint configuration and shall meet specifications of the Rubber Expansion Joint Division.

Providing, installation, testing and commissioning of 100 mm diameter Neoprene based flexible connectors shall be of the single- or double-sphere molded joint configuration and shall meet specifications of the Rubber Expansion Joint Division.

Providing, installation, testing and commissioning of 150 mm diameter Neoprene based flexible pump connectors shall be of the single- or double-sphere molded joint configuration and shall meet specifications of the Rubber Expansion Joint Division. Maximum Pressure: 225 PSIG based on 170° F operating temperature.

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :

External & Internal Fire Hydrant /wet Riser System: Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Providing, laying, fixing, testing G.I Pipe heavy duty 'B' Class 80 mm dia pipe conforming to IS:1239 pipe including all fittings like bends, elbow, tees, coupling and also anchor fastener etc. complete with brick pedestal supporting arrangement below pipe complete in all respect.(burried pipe)

Providing pipe protection for underground pipes from corrosion painting pipe with approved primer and covered with anticorrosive tape (4mm thick) of approved make as per specifications pipe size as follow: 80 mm diameter

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

Supplying and fixing first-aid 30 meter long Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying and fixing first-aid 40 meter long Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Providing and fixing of weather proof hose cabinet fabricated from 16g MS sheet with full glass door and locking arrangement, suitable to accommodate 2 nos. 15m long 63 mm dia hose, and one no. branch pipe with nozzle. The cabinet shall be painted with two coats of 'Fire red' enamel paint over two coats of Zinc Cromate primer including "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx. 0.75m x 0.6m x 0.25m).

Supplying and fixing Gun Metal 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required as per approved make.

Supplying and fixing of 2-way fire brigade connection to static tank (Draw out connection) of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

Supplying and fixing of 4-way fire brigade connection to static tank of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

Supplying and fixing of 3-way fire brigade Siamese connection to Hydrant ring of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

Providing and fixing fire authority approved 25 mm diameter drain valves with S.S. ball including all fittings required as per specifications.

Providing & fixing 20mm dia GM single acting type Air Release Valve with screwed ends as per specifications.

Providing & fixing Fire pump ON/OFF switch including all related fitting accessories as per engineer in charge.

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type Pendent sprinklers of rating 68 degree centigrade with required accessories :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type Conceled sprinklers of rating 68 degree centigrade with required accessories :

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1000mm long sizes complete as required.

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of 80 mm sizes as required :(cabling will be part of Fire Alarm System)

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of 100 mm sizes as required :(cabling will be part of Fire Alarm System)

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of 150 mm sizes as required :(cabling will be part of Fire Alarm System)

Providing & fixing enameled steel cabinet of required size having full glass front door and locking arrangement for keeping 12 spare sprinklers of each type and one spanner properly fixed cabinet painted with 2 coats of enamel paint of approved make and shade over 2 coats of primer to the approval of engineer.

ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket etc. complete, confirming to IS:15683

Supply and installation of fire man's axe.

Supply and installing ISI marked under (IS : 10658) 9 Kg. capacity DCP trolley mounted mobile fire extinguisher complete with gunmetal union, discharge hose, squeeze grip, nozzle and initial charge complete in all respect for D.G. Set Room and Transformer room (one each).

ELECTRICAL WORKS Point wiring in Copper wire with Modular type switches- SITC of Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories. Cat. III. The makes of Modular switches shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Point wiring in Copper wire with Modular type switches- SITC of Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Point wiring in Copper wire with Modular type switches- SITC of Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories. Cat. III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Point wiring in Copper wire with Modular type switches- SITC of Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat. III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Point wiring in Copper wire with Modular type switches- SITC of Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat. III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Point wiring in Copper wire with Modular type switches- SITC of Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [III] For 20A Plug with 2-4 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat. III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Point wiring in Copper wire with Modular type switches- SITC of Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories. Cat-III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection as desired by Engineer In charge. (3) Two Pin/RJ-11 Telephone Socket. [A] For One Gang. Cat. III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection as desired by Engineer In charge. (4) TV Co-axial Socket outlet. Cat. III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection as desired by Engineer In charge. (5) Electronic hum Free four or more steps EME Fan regulator. Cat-III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection as desired by Engineer In charge. (7) Blank Plate Single. Cat-III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection as desired by Engineer In charge. (8) Modem Jack for Computer Open RJ-45. Cat-III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection as desired by Engineer In charge. (10) 6/16Amp. Universal socket. Cat-III. The makes of material shall be like Legrand, Schneider, MK Crabtree, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

PVC Conduit- Supply, installation, testing and commissioning of ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (a) 20 mm. The make of the Conduit shall be ISI marked and as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

PVC Conduit- Supply, installation, testing and commissioning of ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (a) 25 mm. The make of the Conduit shall be ISI marked and as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

PVC Conduit- Supply, installation, testing and commissioning of ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (a) 32 mm. The make of the Conduit shall be ISI marked and as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

PVC Conduit- Supply, installation, testing and commissioning of ISI mark PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (a) 20 mm. The make of the Conduit shall be ISI marked and as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

PVC Conduit- Supply, installation, testing and commissioning of ISI mark PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (a) 25 mm. The make of the Conduit shall be ISI marked and as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

PVC Conduit- Supply, installation, testing and commissioning of ISI mark PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (a) 32 mm. The make of the Conduit shall be ISI marked and as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of G.I. Junction cross over box for metal / Al. trunking with duct entry 25mm x 38mm size having epoxy powder coated trap lead with corrosion & rust free having load bearing capacity of 3.6 TONS with adjustable levelling screw of following size. [1] 150mm x 150mm x 60/75 mm depth The make of the Junction Box shall be as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of G.I. Junction cross over box for metal / Al. trunking with duct entry 25mm x 38mm size having epoxy powder coated trap lead with corrosion & rust free having load bearing capacity of 3.6 TONS with adjustable levelling screw of following size. [2] 250mm x 250mm x 60/75 mm The make of the Junction Box shall be as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (b) 2 wire 1.5 sq. mm. The make of the Wire shall be like RR Kabel, RPG, Polycab or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (b) 2 wire 2.5 sq. mm. The make of the Wire shall be like RR Kabel, RPG, Polycab or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (b) 2 wire 4 sq. mm. The make of the Wire shall be like RR Kabel, RPG, Polycab or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (b) 2 wire 6 sq. mm. The make of the Wire shall be like RR Kabel, RPG, Polycab or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (b) 4 wire 10 sq. mm. The make of the Wire shall be like RR Kabel, RPG, Polycab or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. b) RG-6 The make of the cable shall be as per the approved make list of BSNL/PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. [A] Unarmoured, Conductor Size 0.5 mm 2) Two Pairs The make of the cable shall be Delton or as per the approved make list of BSNL/PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. (b) Armoured [Jelly Filled], Conductor Size 0.5 mm 2) Twenty Pairs The make of the cable shall be Delton or as per the approved make list of BSNL/PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. (b) Armoured [Jelly Filled], Conductor Size 0.5 mm 2) Fifty Pairs The make of the cable shall be Delton or as per the approved make list of BSNL/PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. (b) Armoured [Jelly Filled], Conductor Size 0.5 mm 2) One Hundred Pairs The make of the cable shall be Delton or as per the approved make list of BSNL/PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make LAN cable of following size in existing pipe as per direction. [C] CAT - 6 The make of the cable shall be Delton or as per the approved make list of BSNL/PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only. Cat III The make of the MCCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating up to 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S.housing. ICS=100% of ICU only. Cat III. The make of the MCCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Miniature circuit breaker Single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark. Cat III. The make of the MCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Miniature circuit breaker 240 V MCB Double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity. (A) 6 to 32 Amp. Cat-III The make of the MCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Miniature circuit breaker 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (A) 6 to 32 Amp. Cat-III The make of the MCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Miniature circuit breaker 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (B) 40 Amp. Cat-III The make of the MCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Miniature circuit breaker 415V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (C) 63 Amp. Cat-III The make of the MCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used). (D) Single phase 6way SS Double door The make of the MCB DB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used). (L) Three phase 6 way SS Double door for single phase outgoing horizontal box The make of the MCB DB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used). (L) Three phase 8 way SS Double door for single phase outgoing horizontal box The make of the MCB DB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed. (i) 25 Amps. DP CAT-III The make of the ELCB/RCCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed. (ii) 40Amps. DP Cat-III The make of the ELCB/RCCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed. (iii) 63 Amps. DP Cat-III The make of the ELCB/RCCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. (ii) 40 Amps. FP Cat-III The make of the ELCB/RCCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. (ii) 63 Amps. FP Cat-III The make of the ELCB/RCCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 6 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed. [e] 32A to 40A, 4 Pole Three Phase. Cat-III The make of the ELCB/RCCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 6 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed. [f] 63A, 4 Pole Three Phase. Cat-III The make of the ELCB/RCCB shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comporised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transperent cover erected as required with necessary connection. The make of the Time Swicth shall be like ABB, Schneider, Siemens, L & T or as per the approved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, installation, testing and commissioning of metallic vetrified danger notice board for MEDIUM VOLTAGE installation to be erected as per I.S.

Supply, installation, testing and commissioning of 50X5mm Hot dipped GI strip at a depth of 0.5m below ground as strip earth electrode, including termination/ interconnecting with GI Nut/Bolts, washer, Spring washer etc. as required. Jointing shall be done b yoverlapping & with two sets of Nut/ bolts and spring washer spaced at 50mm apart for earthing for Electrical Equipments.

Supply, installation, testing and commissioning of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt for earthing for Electrical Equipments.

Supply, installation, testing and commissioning of earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. [B] For Electrical installation up to 11 KV. located in other than normal soil i.e. Soft Rock, Marshy Soil etc. Length of Pipe : 2 mtr. -Back filling Compound :1 no. Bag of 25 Kg.

Supply, installation, testing and commissioning of earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. [C] For Electrical Installation covering Transformer, DG, LV Panel Earthing, A.C.Plant & Sensitive Computer System (like Automation, SCADA) i.e. independent Earthing located in other than normal soil i.e.Soft Rock, Marshy Soil etc. Length of Pipe : 3 mtr. -Back filling Compound :2 no. Bag of 25 Kg.

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor unarmoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3 core 2.5 Sq. mm Unarmoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Cu. Conductor unarmoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3 core 2.5 Sq. mm Unarmoured Copper

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al.Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3 core 2.5 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al.Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3 core 4 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al.Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3 core 6 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3 core 10 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3 core 16 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3 core 25 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3.5 core 50 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3.5 core 70 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3.5 core 95 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3.5 core 120 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3.5 core 150 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 3.5 core 240 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 4 core 6 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 4 core 10 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 4 core 16 Sq. mm Armoured Aluminium

LT Cable- Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE insulated multistrand Al. Conductor armoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. The makes of cable shall be like RR Cable, Polycab, RPG, Universal or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). 4 core 25 Sq. mm Armoured Aluminium

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Supply, installation, testing and commissioning of Light duty “A” Class G.I . Pipe as directed by Engineer-in-charge. (A) 25 mm dia

Supply, installation, testing and commissioning of Light duty “A” Class G.I . Pipe as directed by Engineer-in-charge. (A) 50mm dia

Supply, installation, testing and commissioning of Light duty “A” Class G.I . Pipe as directed by Engineer-in-charge. (A) 80mm dia

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC/ XLPE insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. The makes of cable gland shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (c) 2 to 4 core 6 Sq. mm Cable

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC/ XLPE insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. The makes of cable gland shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (c) 2 to 4 core 10 Sq. mm Cable

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC/ XLPE insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. The makes of cable gland shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (c) 2 to 4 core 16 Sq. mm Cable

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC/ XLPE insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. The makes of cable gland shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (c) 2 to 4 core 25 Sq. mm Cable

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC/ XLPE insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. The makes of cable gland shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (B) 3 & 1/2 core 35/50 Sq. mm Cable

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC/ XLPE insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. The makes of cable gland shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (C) 3 & 1/2 core 70 Sq. mm Cable

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC/ XLPE insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. The makes of cable gland shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (D) 3 & 1/2 core 95 Sq. mm Cable

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC/ XLPE insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. The makes of cable gland shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (F) 3 & 1/2 core 150 Sq. mm Cable

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC/ XLPE insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. The makes of cable gland shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (H) 3 & 1/2 core 240 Sq. mm Cable

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. The makes of cable lugs shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (D) Up to 25 Sq.mm Cable

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. The makes of cable lugs shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (E) 35/50 Sq.mm Cable

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. The makes of cable lugs shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (F) 70 Sq.mm Cable

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. The makes of cable lugs shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (G) 95 Sq.mm Cable

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. The makes of cable lugs shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (I) 150 Sq.mm Cable

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. The makes of cable lugs shall be Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (K) 240 Sq.mm Cable

Supply, Installation and fixing of approved make Perforated C type cable tray made from pre- galvanized CR sheet steel. The cable tray should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (3) 150 X 50 X 1.5 mm Thick

Supply, Installation and fixing of approved make Perforated C type cable tray made from pre- galvanized CR sheet steel. The cable tray should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (5) 300 X 50 X 1.5 mm Thick

Supply, Installation and fixing of approved make Perforated C type cable tray made from pre- galvanized CR sheet steel. The cable tray should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (6) 450 X 50 X 1.5 mm Thick

Supply, Installation and fixing of approved make Perforated C type cable tray made from pre- galvanized CR sheet steel. The cable tray should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (7) 600 X 50 X 1.5 mm Thick

Supply, Installation and fixing of approved make 'T' Junction for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (3a) 150 X 50 X 1.5 mm Thick ' T' Junction

Supply, Installation and fixing of approved make 'T' Junction for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (5a) 300 X 50 X 1.5 mm Thick ' T' Junction

Supply, Installation and fixing of approved make 'T' Junction for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (6a) 450 X 50 X 1.5 mm Thick ' T' Junction

Supply, Installation and fixing of approved make 'T' Junction for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (7a) 600 X 50 X 1.5 mm Thick ' T' Junction

Supply, Installation and fixing of approved make '90° Elbow' for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (3) 150 X 50 X 1.5 mm Thick 90° Elbow

Supply, Installation and fixing of approved make '90° Elbow' for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (5) 300 X 50 X 1.5 mm Thick 90° Elbow

Supply, Installation and fixing of approved make '90° Elbow' for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (6) 450 X 50 X 1.5 mm Thick 90° Elbow

Supply, Installation and fixing of approved make '90° Elbow' for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (7) 600 X 50 X 1.5 mm Thick 90° Elbow

Supply, Installation and fixing of approved make 'Cross over Junction' for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (3) 150 X 50 X 1.5 mm Thick Cross Junction

Supply, Installation and fixing of approved make 'Cross over Junction' for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (5) 300 X 50 X 1.5 mm Thick Cross Junction

Supply, Installation and fixing of approved make 'Cross over Junction' for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (6) 450 X 50 X 1.5 mm Thick Cross Junction

Supply, Installation and fixing of approved make 'Cross over Junction' for Perforated C type cable tray made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 and shall be provided with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. The makes of cable tray accessories shall be as per the appproved make list of PWD/ DNHPDCL or as approved by Chief Technical Officer (CTO). (7) 600 X 50 X 1.5 mm Thick Cross Junction

Supply, Installation, testing and commissioning of approved make Ceiling fan with double ball bearing, ISI mark with condenser, A.C. 23OV, 50 c/s.,1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing complete as required. The makes of Fans shall be Crompton, Bajaj, USHA, Orient, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Providing and fixing of 2.5mm.thick laminated sheet to cover the fan hook or Fan box as required.

Supply, Installation, testing and commissioning of single phase approved make Industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM. [A] 305 mm dia 900 RPM. Cat-II. The makes of Fans shall be Almonard, USHA or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supplying & erecting electro galvanised G.I. wire micro mesh jali cover of grade 304 required size with suitable wooden frame duly fitted in wall outside of exhaust fan for insect protection.

Supply, Installation, testing and commissioning of single phase approved make Oscillating type bracket fan, A.C. 23OV, 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed. Cat-II The makes of Fans shall be Crompton, Bajaj, USHA, Orient, Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Providing & erecting approved make street light / wall mounting junction box compression moulded from DMC (thermoset plastic) vertical sliding cover having locking with square head stud loop in / loop out in built terminal suitable for four core cable, waterproof of I.P. 54 protected with clamp or bolt nut & earth bolt of following size. [B] 250mm x 194mm x 99 mm The makes of Junction Box shall be as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, Installation, testing and commissioning of approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free batteries. The charger having operating capacity for input 160-270V AC & inverter having output 23OV,5O Hz Ac with 0.8 load power factor with battery, over/ under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following capacity & with Following size of batteries. (D) 5 KVA (i) With 11 Nos. of 12 V 55 Ah SMF batteries. The makes of UPS shall be Delta, Eaton, Schneider, ABB, Siemens or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Providing and erecting AC-3 duty, 3 pole Power Contactor with 2 NO & 2 NC auxilary contacts complete with 415V/220V operating coil suitable for - 40 amp. It shall be suitable for Dinrail mounted & DB mounted. The makes of Contactor shall be Legrand, ABB, Schneider, L&T, Siemens or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

AMF Panel- Supply, erecting, commissioning and testing of approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/ manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency stop battery charger. The AMF Panel of following capacity- (D) 200 KVA/250 KVA3 phase DG Set The makes of AMF Panel shall be like Kirloskar, Cummins, Caterpillar or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Acoustic enclosure- Supplying and erecting Acoustic enclosure (canopy) made out of 18 SWG, CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183. The resin bonded Rockwool covered from inside level not more than 75 dB at a distance of 1 mtr, as PVCT norms, provided on foundation suitable for following size of DG Set. The enclosures for following capacity of DG sets. (E) For 250 KVA

Supplying, Erecting, Testing & Commissioning of LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name. 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %, CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). (A) Tube Light with integral/ non-integral driver. (d) 20-22 Watts, Surge - 4KV,IP-20, 4 feet. Cat-III. The makes of Lighting fixtures shall be Wipro, Philips, Crompton Greaves, Bajaj ,Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supplying, Erecting, Testing & Commissioning of LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name. 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %, CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). (D) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete. (c ) 12-15 watts, 200 x 200 mm, Surge-2 KV. Cat-III. The makes of Lighting fixtures shall be Wipro, Philips, Crompton Greaves, Bajaj ,Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supplying, Erecting, Testing & Commissioning of LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name. 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %, CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). (D) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete. (d) 18 to 20 watts, 250 x 250 mm, Surge- 4 KV. Cat-III. The makes of Lighting fixtures shall be Wipro, Philips, Crompton Greaves, Bajaj ,Havells or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, lowering, laying and jointing of HDPE pipes and specials (By butt fusion welding method) including cost of conveyance from stores to site of works at all level including cost of labour, material as required. (1) 50mm dia The makes of HDPE Pipe shall be as per the approved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, lowering, laying and jointing of HDPE pipes and specials (By butt fusion welding method) including cost of conveyance from stores to site of works at all level including cost of labour, material as required. (2) 75mm dia The makes of HDPE Pipe shall be as per the approved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, lowering, laying and jointing of HDPE pipes and specials (By butt fusion welding method) including cost of conveyance from stores to site of works at all level including cost of labour, material as required. (3) 110mm dia The makes of HDPE Pipe shall be as per the approved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, lowering, laying and jointing of HDPE pipes and specials (By butt fusion welding method) including cost of conveyance from stores to site of works at all level including cost of labour, material as required. (4) 160mm dia The makes of HDPE Pipe shall be as per the approved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, providing, laying in standard length ISI mark high density Polyethylene H.D.P.E. Pipes of size HDPE PE100 PN10 as per IS-4984/2016 suitable for underground cable duct, including of Couplers and endcaps as required. (1) 50mm dia The makes of HDPE Pipe shall be as per the approved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, providing, laying in standard length ISI mark high density Polyethylene H.D.P.E. Pipes of size HDPE PE100 PN10 as per IS-4984/2016 suitable for underground cable duct, including of Couplers and endcaps as required. (2) 75mm dia The makes of HDPE Pipe shall be as per the approved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, providing, laying in standard length ISI mark high density Polyethylene H.D.P.E. Pipes of size HDPE PE100 PN10 as per IS-4984/2016 suitable for underground cable duct, including of Couplers and endcaps as required. (3) 110mm dia The makes of HDPE Pipe shall be as per the approved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, providing, laying in standard length ISI mark high density Polyethylene H.D.P.E. Pipes of size HDPE PE100 PN10 as per IS-4984/2016 suitable for underground cable duct, including of Couplers and endcaps as required. (4) 160mm dia The makes of HDPE Pipe shall be as per the approved make list of PWD or as approved by Chief Technical Officer (CTO).

Excavation for pipe line trenches for electrical line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified and as required for completion of job. (a) in all sorts of soil and soft murrum. upto 0.6m depth to 1.5m depth

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB with arrangement for FPMCB, ELMCBs and SPMCBs and incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 12 Way TPN MCB DB The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting VTPN MCB DB with arrangement for FPMCB, ELMCBs and SPMCBs and incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 4 Way VTPN MCB DB The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting VTPN MCB DB with arrangement for FPMCB, ELMCBs and SPMCBs and incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 8 Way VTPN MCB DB The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, Installation, testing and commissioning of 32A TP MCB, 10kA Short Circuit Breaking Capacity, ‘C’ curve & conforming to IS/IEC 60898-2:2003 in existing box as required. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, Installation, testing and commissioning of 40A TP MCB, 10kA Short Circuit Breaking Capacity, ‘C’ curve & conforming to IS/IEC 60898-2:2003 in existing box as required. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Supply, Installation, testing and commissioning of 63A TP MCB, 10kA Short Circuit Breaking Capacity, ‘C’ curve & conforming to IS/IEC 60898-2:2003 in existing box as required. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Section Feeder Pillar: Design, manufacturing, Supply, Loading, Packing, forwarding, Unloading, handling (shifting from place of unloading to place of storage and shifting from the place of storage to the place of installation including insurance), storage at site, assembly, installation, conducting pre-commissioning test as per IS & IEC Standards, commissioning & performance demonstration of following weather proof, dust & vermin proof, plinth/floor/structural support mounted front operated Outdoor type cubical switchgear enclosure having IP-55 protection made from 14 SWG thick CRCA M.S. sheet for outer body & doors, 16 SWG thick CRCA M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. Refer SLD for more details. The Panel shall have following components- Incoming- 1. 500A FP Microprocessor based MCCB, 36kA with O/L, S/C and E/F Protection- 1 No. 2. 1 set of R,Y,B Phase indicating lamps with control MCB’s. 3. 500A Tinned AL Bus Bar Outgoing- 1. 250 A, TPN Microprocessor based MCCB, 25kA with S/C and E/F Protection- 2 Nos 2. 160 A, TPN Microprocessor based MCCB, 16kA with S/C and E/F Protection- 1 Nos 3. 100 A, TPN Microprocessor based MCCB, 16kA with S/C and E/F Protection- 4 Nos Refer Technical Specification & Drawing No. TCE.11364A-EL-4000-AU-40081 for more details. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). Note- The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.

Section Feeder Pillar: Design, manufacturing, Supply, Loading, Packing, forwarding, Unloading, handling (shifting from place of unloading to place of storage and shifting from the place of storage to the place of installation including insurance), storage at site, assembly, installation, conducting pre-commissioning test as per IS & IEC Standards, commissioning & performance demonstration of following weather proof, dust & vermin proof, plinth/floor/structural support mounted front operated Outdoor type cubical switchgear enclosure having IP-55 protection made from 14 SWG thick CRCA M.S. sheet for outer body & doors, 16 SWG thick CRCA M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. Refer SLD for more details. The Panel shall have following components- Incoming- 1. 400A FP Microprocessor based MCCB, 36kA with O/L, S/C and E/F Protection- 1 No. 2. 1 set of R,Y,B Phase indicating lamps with control MCB’s. 3. 400A Tinned AL Bus Bar Outgoing- 1. 63 A, TPN MCB, 10kA - 7 Nos 2. 40 A, TPN MCB, 10kA - 6 Nos Refer Technical Specification & Drawing No. TCE.11364A-EL-4000-AU-40082 for more details. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). Note- The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.

Section Feeder Pillar: Design, manufacturing, Supply, Loading, Packing, forwarding, Unloading, handling (shifting from place of unloading to place of storage and shifting from the place of storage to the place of installation including insurance), storage at site, assembly, installation, conducting pre-commissioning test as per IS & IEC Standards, commissioning & performance demonstration of following weather proof, dust & vermin proof, plinth/floor/structural support mounted front operated Outdoor type cubical switchgear enclosure having IP-55 protection made from 14 SWG thick CRCA M.S. sheet for outer body & doors, 16 SWG thick CRCA M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. Refer SLD for more details. The Panel shall have following components- Incoming- 1. 315A FP Microprocessor based MCCB, 25kA with O/L, S/C and E/F Protection- 1 No. 2. 1 set of R,Y,B Phase indicating lamps with control MCB’s. 3. 315A Tinned AL Bus Bar Outgoing- 1. 125 A, TPN Microprocessor based MCCB, 16kA with S/C and E/F Protection- 3 Nos 2. 100 A, TPN Microprocessor based MCCB, 16kA with S/C and E/F Protection- 2 Nos Refer Technical Specification & Drawing No. TCE.11364A-EL-4000-AU-40081 for more details. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). Note- The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.

Section Feeder Pillar: Design, manufacturing, Supply, Loading, Packing, forwarding, Unloading, handling (shifting from place of unloading to place of storage and shifting from the place of storage to the place of installation including insurance), storage at site, assembly, installation, conducting pre-commissioning test as per IS & IEC Standards, commissioning & performance demonstration of following weather proof, dust & vermin proof, plinth/floor/structural support mounted front operated Outdoor type cubical switchgear enclosure having IP-55 protection made from 14 SWG thick CRCA M.S. sheet for outer body & doors, 16 SWG thick CRCA M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. Refer SLD for more details. The Panel shall have following components- Incoming- 1. 250A FP Microprocessor based MCCB, 25kA with O/L, S/C and E/F Protection- 1 No. 2. 1 set of R,Y,B Phase indicating lamps with control MCB’s. 3. 250A Tinned AL Bus Bar Outgoing- 1. 250 A, TPN Microprocessor based MCCB, 16kA with S/C and E/F Protection- 1 Nos 2. 100 A, TPN Microprocessor based MCCB, 16kA with S/C and E/F Protection- 3 Nos Refer Technical Specification & Drawing No. TCE.11364A-EL-4000-AU-40081 for more details. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). Note- The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.

Section Feeder Pillar: Design, manufacturing, Supply, Loading, Packing, forwarding, Unloading, handling (shifting from place of unloading to place of storage and shifting from the place of storage to the place of installation including insurance), storage at site, assembly, installation, conducting pre-commissioning test as per IS & IEC Standards, commissioning & performance demonstration of following weather proof, dust & vermin proof, plinth/floor/structural support mounted front operated Outdoor type cubical switchgear enclosure having IP-55 protection made from 14 SWG thick CRCA M.S. sheet for outer body & doors, 16 SWG thick CRCA M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. Refer SLD for more details. The Panel shall have following components- Incoming- 1. 250A FP Microprocessor based MCCB, 25kA with O/L, S/C and E/F Protection- 1 No. 2. 1 set of R,Y,B Phase indicating lamps with control MCB’s. 3. 250A Tinned AL Bus Bar Outgoing- 1. 63 A, TPN MCB, 10kA - 4 Nos 2. 40 A, TPN MCB, 10kA - 4 Nos 3. 32 A, TPN MCB, 10kA -1 No. Refer Technical Specification & Drawing No. TCE.11364A-EL-4000-AU-40082 for more details. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). Note- The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.

Section Feeder Pillar: Design, manufacturing, Supply, Loading, Packing, forwarding, Unloading, handling (shifting from place of unloading to place of storage and shifting from the place of storage to the place of installation including insurance), storage at site, assembly, installation, conducting pre-commissioning test as per IS & IEC Standards, commissioning & performance demonstration of following weather proof, dust & vermin proof, plinth/floor/structural support mounted front operated Outdoor type cubical switchgear enclosure having IP-55 protection made from 14 SWG thick CRCA M.S. sheet for outer body & doors, 16 SWG thick CRCA M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. Refer SLD for more details. The Panel shall have following components- Incoming- 1. 100A FP Microprocessor based MCCB, 16kA with O/L, S/C and E/F Protection- 1 No. 2. 1 set of R,Y,B Phase indicating lamps with control MCB’s. 3. 100A Tinned AL Bus Bar Outgoing- 1. 100 A, TPN Microprocessor based MCCB, 16kA with S/C and E/F Protection- 2 Nos Refer Technical Specification & Drawing No. TCE.11364A-EL-4000-AU-40081 for more details. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). Note- The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.

Section Feeder Pillar: Design, manufacturing, Supply, Loading, Packing, forwarding, Unloading, handling (shifting from place of unloading to place of storage and shifting from the place of storage to the place of installation including insurance), storage at site, assembly, installation, conducting pre-commissioning test as per IS & IEC Standards, commissioning & performance demonstration of following weather proof, dust & vermin proof, plinth/floor/structural support mounted front operated Outdoor type cubical switchgear enclosure having IP-55 protection made from 14 SWG thick CRCA M.S. sheet for outer body & doors, 16 SWG thick CRCA M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. Refer SLD for more details. The Panel shall have following components- Incoming- 1. 100A FP Microprocessor based MCCB, 16kA with O/L, S/C and E/F Protection- 1 No. 2. 1 set of R,Y,B Phase indicating lamps with control MCB’s. 3. 100A Tinned AL Bus Bar Outgoing- 1. 32 A, TPN MCB, 10kA - 3 Nos Refer Technical Specification & Drawing No. TCE.11364A-EL-4000-AU-40082 for more details. The makes of Switchgear shall be Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). Note- The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.

Decorative/ Modern type LED Street Light Fixture with Decorative Pole- Supply, installation, testing and commissioning of 70-75 Watt LED Modern Street Light type Decorative Light Fixture with 6.4 mtr Die Cast Aluminium Decorative Pole of 100 mm dia. including following specifications. 1. The Pole and Lumianire shall be made of Die cast EN-AB-47100 aluminium housing, extruded EN AW-6060 aluminium structure with high corrosion resistance with Stainless steel screws. 2. The Pole shall have 150mm dia base plate with necessary bolts and fittings. The Pole shall be Powder coated as per approved colour with minimum two nos. of weather proof coat. Construction of Cement concrete foundation in M20 grade is included in this activity and shall be in the scope of Contractor. 3. The Pole shall be provided with all required cable connection with suitable Junction Box with MCB mounting arrangement inside the pole. 4. The Luminiare shall have colour temperature of 4000K and shall have Clear toughned glass 5mm thick diffuser. Luminaire shall be provided with single cable entry, gormmet, Silicon gasket and shall be Double powder painted. 5. The Luminaire shall have 24 highpower LEDs, CRI>70 and minimum system lumen output of 8900lm. 6. The Luminaire shall have rated luminous flux 6364lm and Rated input power of 70-75 Watt, 220V-240V AC, 50/60 HZ, including surge protection device of 10kV. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. 7. The Lumianire shall have ingress protection of IP66 and IK08. The product should be BIS approved (if applicable) and To be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. 8. The entire work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, Suitable fixing arrangement, Foundation as required complete in all respect as per direction of Engineer in Charge. Refer Technical Specification for more details. The makes of Pole and LED Light Fixture shall be like Simes, Erco, Zumtobel, Neri only.

LED Post of Lantern with Decorative Pole- Supply, installation, testing and commissioning of 30-32 Watt LED Post of Lantern type Decorative Light Fixture with 4 mtr Die Cast Aluminium Decorative Pole of 100 mm dia. including following specifications. 1. The Pole and Lumianire shall be made of Die cast EN-AB-47100 aluminium housing, extruded EN AW-6060 aluminium structure with high corrosion resistance with Stainless steel screws. 2. The Pole shall have 150mm dia base plate with necessary bolts and fittings. The Pole shall be Powder coated as per approved colour with minimum two nos. of weather proof coat. Construction of Cement concrete foundation in M20 grade is included in this activity and shall be in the scope of Contractor. 3. The Pole shall be provided with all required cable connection with suitable Junction Box with MCB mounting arrangement inside the pole. 4. The Luminiare shall have colour temperature of 4000K and shall have Clear toughned glass 5mm thick diffuser. Luminaire shall be provided with single cable entry, gormmet, Silicon gasket and shall be Double powder painted. 5. The Luminaire shall have 24 highpower LEDs, CRI>80 and minimum system lumen output of 3360lm. 6. The Luminaire shall have rated luminous flux 1721lm and Rated input power of 30-32 Watt, 220V-240V AC, 50/60 HZ, including surge protection device of 10kV. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. 7. The Lumianire shall have ingress protection of IP66 and IK08. The product should be BIS approved (if applicable) and To be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. 8. The entire work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, Suitable fixing arrangement, Foundation as required complete in all respect as per direction of Engineer in Charge. Refer Technical Specification for more details. The makes of Pole and LED Light Fixture shall be like Simes, Erco, Zumtobel, Neri only.

LED Flood Light- Supply, installation, testing and commissioning of integral 120-125 W LED based Flood light, housing made up of pressure die cast aluminum Alloy with effective thermal management, sturdiness and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 13200 lumens and maximum system wattage of 125 Watts.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP68 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=08.The fixture driver should have an operating voltage range of 140-270 V, Surge protection of >=10KV, PF >0.9 and THD<10%. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2. Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, Suitable fixing arrangement, Foundation as required complete in all respect as per direction of Engineer in Charge. The product should be BIS approved (if applicable) and To be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. The makes of LED Fixture shall be like Philips, Havells, K-lite or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

LED Inground Burial Light- Supply, Installation, Testing and Commissioning of Integral driver round LED in ground burial type luminaire with a minimum system lumen output of 1100 lumens and a minimum system efficacy of 85 lm/W with beam angle of 20 deg. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI > 80. The luminaire shall meet IP67 rating and IK10 with PF >0.9. The luminaire should be made up of Al housing and tempered glass cover of 7mm with PMMA Reflector with Painting qualified with 500hrs salt spray performance. The total power consumption shoul be 14-15 Watt (including driver). Work should be complete with necessary factory made weather proof cable, lenses, and external power, wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer in Charge. The product should be BIS approved (if applicable) and to be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. The makes of LED Luminaire shall be similar to Neri, Ligman, K-lite or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

LED Bracket Down Light- Supply, Installation, Testing and Commissioning of weatherproof, corrosion resistant, integral driver LED Bracket type Down Light luminaire with a minimum system lumen output of 1850 lumens and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 3000K-4000K and CRI > 70. The luminaire shall meet IP65 rating and IK06 with PF >0.9. The luminaire should be made up of Al housing and clear toughened glass cover with Painting qualified with 500hrs salt spray performance. The total power consumption shoul be 18-20 Watt (including driver). Work should be complete with necessary factory made weather proof cable, lenses, and external power, wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer in Charge. The product should be BIS approved (if applicable) and to be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. The makes of LED Luminaire shall be similar to Neri, Ligman, K-lite or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

LED Wall Bracket Flood Light- Supply, Installation, Testing and Commissioning of weatherproof, corrosion resistant, integral driver LED Wall Bracket type Flood Light luminaire with a minimum system lumen output of 2280 lumens and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI > 70. The fixture driver should have an operating voltage range of 140-270 V, Surge protection of >=10KV, PF >0.9 and THD<10%.The luminaire shall meet IP66 rating and IK09 with PF >0.9. The luminaire should be made up of Die cast EN-AB-47100 aluminium housing and clear toughened glass cover with Painting qualified with 500hrs salt spray performance. The total power consumption shoul be 19-21 Watt (including driver). Work should be complete with necessary factory made weather proof cable, lenses, and external power, wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer in Charge. The product should be BIS approved (if applicable) and to be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. The makes of LED Luminaire shall be similar to Neri, Ligman, Simes, Erco, Zumtobel only.

LED Bulkhead Light- Supply, Installation, Testing and Commissioning of weatherproof, corrosion resistant, integral driver LED Bulkhead surface mounted type luminaire with a minimum system lumen output of 900 lumens and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 3000K-4000K and CRI > 70. The luminaire shall meet IP65 rating and IK07 with PF >0.9. The luminaire should be made up of die Al housing and UV stabilised Polycarbonate glass cover. The total power consumption shoul be 11-12 Watt (including driver). Work should be complete with necessary factory made weather proof cable, lenses, and external power, wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer in Charge. The product should be BIS approved (if applicable) and to be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. The makes of LED Luminaire shall be similar to Neri, Ligman, K-lite or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

LED Concealed Foot Light- Supply, Installation, Testing and Commissioning of weatherproof, corrosion resistant, integral driver LED Concealed Foot light type luminaire with a minimum system lumen output of 900 lumens and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 3000K-4000K and CRI > 70. The luminaire shall meet IP66 rating and IK07 with PF >0.9. The luminaire should be made up of die Al housing and Opal toughened glass cover. The total power consumption shoul be 11-12 Watt (including driver). Work should be complete with necessary factory made weather proof cable, lenses, and external power, wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer in Charge. The product should be BIS approved (if applicable) and to be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. The makes of LED Luminaire shall be similar to Neri, Ligman, K-lite or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

LED Rope Light- Supply, Installation, Testing and Commissioning of 20/25 mm wide exterior, weatherproof and dustproof LED Rope light type luminaire in casing patti with a minimum system lumen output of 500 lumen per meter and a minimum system efficacy of 85 lm/W. The luminaire shall have a rated system lifetime of 30,000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI > 70. The luminaire shall meet IP65 rating and IK07 with PF >0.9. The luminaire shall have silicon cover, anti UV and high quality polycarbonate diffuser. The total power consumption shoul be 7-8 Watt/ meter. Work should be complete with necessary factory made weather proof cable, driver, and external power, wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer in Charge. The product should be BIS approved (if applicable) and to be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. The makes of LED Luminaire shall be similar to Neri, Ligman, K-lite or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

LED Wall Washer- Supply, Installation, Testing and Commissioning of weatherproof, corrosion resistant, exterior driver LED Wall Washer type luminaire with a minimum system lumen output of 1900 lumens and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 3000K-4000K and CRI > 70. The luminaire shall meet IP65 rating and IK07 with PF >0.9. The luminaire should be made up of extruded Al housing and Toughened Glass Cover with High Impact Resistant Strength. The total power consumption should be 23-24 Watt/ meter. Work should be complete with necessary factory made weather proof cable, lenses, and external power, wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer in Charge. The product should be BIS approved (if applicable) and to be supported with Product test reports - LM79, BIS Report and LEDs - LM80, RoHS. The makes of LED Luminaire shall be similar to Neri, Ligman, K-lite or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Turbo Ventilator Fan- Supply, Installation, Testing and Commissioning of Industrial grade corrision resistant Aluminium turbo ventilator fan for roof with all required fixing accessories. The fan shall have Twin Sealed bearings with self lubricating resin to ensure frictionless rotation even at lowest wind velocity. The fan shall be Permanently Lubricated & Sealed. The Turbine diameter shall be 760mm and Neck diameter shall be 610mm. The Fan shall have 42 nos of aerofoil Vanes (Blades) and weights around approx. 6kgs. The makes of Fan shall be similar to Almonard, Usha or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Industrial Ceiling Fan- Supply, Installation, Testing and Commissioning of 4800mm diameter Industrial ceiling fan with all required fixing accessories. The fan shall have Gearless direct drive with 3 Blades. The fan shall be power consumption of 0.4 unit per hour and shall have Onboard smart controller . The fan shall have maximum noise level of 35db. The Fan shall be Gearless, frictionless and oilless . The makes of Industrial Fan shall be similar to Almonard, Usha or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).

Commercial Cooler- Supply, Installation, Testing and Commissioning of 170 ltr Single door Commercial Cooler to store vegetables with all required fixing accessories with following specification. The minimum dimension of cooler shall be 1900x1200x600mm. It should have Lockable glass doors, Adjustable shelves and Interior light. The Canopy shall be provided with LED light & Toughened low e-glass. The cooler installation shall be provided on M.S. stand 150mm above ground level. The makes of Commercial Cooler shall be similar to Haier, Voltas, Bluestar, LG or as per the approved make list of PWD or as approved by CTO.

Compact/ Unitised Substation with FRTU (CSS/ USS)- Supply, Installation,Testing and Commissioning approved make of Compact Substation with FRTU having capacity of 500 kVA,3 phase, 50 c/s, Air Natural Type, 21KA for 3 Sec. SF6 insulated Non-Extinsible Compact switchgear (Type DV-NE) consisting of one No. Direct Cable madule and One No. Fixed Manual Vacuum Circuit Breaker in SF6 insulated stainless steel enclosure, with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. Interconnection between HT switchgear and transformer shall be using 1Cx3x150 sq.mm Al. unarmorured XLPE Cable. Copper wound transformer 500 KVA, 11KV/433V, Dyn11, Dry Type, Indoor type Transformer Bushing, Hermatically Sealed Transformer with corrugated wall, without conservator type of design & Top Normal Porcelein Bushings for HT & LT with Off load tap switch of rating +5% to -10% @2.5%, Energy Efficiency level 5, Max @ 50% Loading : As per IS 1180 and Max @ 100% Loading : As per IS 1180 and Impedanance as per IS 1180 with LV PANEL-800 AMPS ALUMINUM BUSBAR ( 100% for Phase and 50% for Neutral, Current Density - 1amp/sqmm) with Outgoings 800 Amps-2 Nos, 433V, 4P, TPN, 36kA, 50Hz Fixed Type Air Circuit Breaker (ACB) with Microprocessor based release for Overload, short circuit & earth Fault protection, Multifunctional Meter with Class 0.5 Accuracy with RS 485 Port, RYB, ON/OFF Trip Indications, Outdoor Enclosure having IP54 degree of protection for HT & LT switchgear compartment & IP23 D degree of protection for Transformer compartment, Powder /Colour Coated Enclosure, with Interconnection Between HT switchgear & Transformer using 1Cx3x150 Sq.mm XLPE Aluminium Single core cable. Interconnection between Transformer & LT switchgear using Al. Busbars. Internal earthing connections by using 50x6 mm GI Strips including Transformer Neutral, Complete as per specification with necessary permission of Electrical Inspector. The CSS shall be provided with 3 mtr. long GI electrode -2 nos.body earthing connected with hot dipped GI strip and 2 nos.neutral earthing connected with copper strip. The providing of earthing is included in this activity and is in the scope of Contractor. The makes of CSS shall be Schneider, ABB, Siemens, Eaton or as per the appproved make list of DNHPDCL or as approved by Chief Technical Officer (CTO).

Compact/ Unitised Substation with FRTU (CSS/ USS)- Supply, Installation,Testing and Commissioning approved make of Compact Substation with FRTU having capacity of 630 kVA,3 phase, 50 c/s, Air Natural Type, 21KA for 3 Sec. SF6 insulated Non-Extinsible Compact switchgear (Type DV-NE) consisting of one No. Direct Cable madule and One No. Fixed Manual Vacuum Circuit Breaker in SF6 insulated stainless steel enclosure, with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. Interconnection between HT switchgear and transformer shall be using 1Cx3x150 sq.mm Al. unarmorured XLPE Cable. Copper wound transformer 630 KVA, 11KV/433V, Dyn11, Dry Type, Indoor type Transformer Bushing, Hermatically Sealed Transformer with corrugated wall, without conservator type of design & Top Normal Porcelein Bushings for HT & LT with Off load tap switch of rating +5% to -10% @2.5%, Energy Efficiency level 5, Max @ 50% Loading : As per IS 1180 and Max @ 100% Loading : As per IS 1180 and Impedanance as per IS 1180 with LV PANEL-800 AMPS ALUMINUM BUSBAR ( 100% for Phase and 50% for Neutral, Current Density - 1amp/sqmm) with Outgoings 1000 Amps-2 Nos, 433V, 4P, TPN, 36kA, 50Hz Fixed Type Air Circuit Breaker (ACB) with Microprocessor based release for Overload, short circuit & earth Fault protection, Multifunctional Meter with Class 0.5 Accuracy with RS 485 Port, RYB, ON/OFF Trip Indications, Outdoor Enclosure having IP54 degree of protection for HT & LT switchgear compartment & IP23 D degree of protection for Transformer compartment, Powder /Colour Coated Enclosure, with Interconnection Between HT switchgear & Transformer using 1Cx3x150 Sq.mm XLPE Aluminium Single core cable. Interconnection between Transformer & LT switchgear using Al. Busbars. Internal earthing connections by using 50x6 mm GI Strips including Transformer Neutral, Complete as per specification with necessary permission of Electrical Inspector. The CSS shall be provided with 3 mtr. long GI electrode -2 nos.body earthing connected with hot dipped GI strip and 2 nos.neutral earthing connected with copper strip. The providing of earthing is included in this activity and is in the scope of Contractor. The makes of CSS shall be Schneider, ABB, Siemens, Eaton or as per the appproved make list of DNHPDCL or as approved by Chief Technical Officer (CTO).

Liaison fees for preparing necessary documents and drawings for getting N.O.C from DNHPDCL and Electrical Inspector for the installation of 11 KV / 0.433 KV Electrical Distribution System and 200kW Grid Connected Solar Plant. (All statutory fees will be paid by SSCL)

Precast Chamber- Providing & Fixing of factory made Precast Chamber, having size (in to in) of 600 mm (L) X 600 mm (B) X Height: 600 mm, T-25 load carrying capacity - 10 T, Axle Load - 5 T Wheel Load, meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500 D reinforcement. The Contractor shall prepare & provide the base using PCC/ Foundation concrete as a levelling course as per drawing / as recommended by the consultant depending upon the foundation soil strata. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation. Hole should be provided at site (No Factory) for connection at the waffle side of chamber as per the site requirement. The Precast cover having size 744 x 744 X 140 mm thick, designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500D reinforcement. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, including making cut-outs, core cutting for utility ducts as per approved QAP as by Engineer In charge.

Hand Dryer- Supply, Installation, Testing and Commissioning of Stainless Steel Hand Dryer with all required connections and following specifications. The dryer shall have Weld-free cover fixed to the base with two safety screws and lock withspecial speedflow key. The dryer shall have Aluminium base and includes silent-blocks to damp mechanical vibrations. The dryer shall be made of Fire resistant plastic UL 94-V0 fan scroll. It should have High-speed motor with safety thermal cut-off.The motor revolutions can be adjusted manually by the potentiometer. The dryer shall be provided with Aluminium centrifugal double asymmetrical inlet fan wheel. The dryer shall Disconnects automatically after 60 seconds of continuous use. The dryer shall have Electronic infrared detection sensor and Adjustable detection by potentiometer (5- 25 cm) and shall have Ultra-flat: 10 cm deep (complies with ADA regulations). The makes of Hand Dryer shall be Kohler, Jaguar or as per the appproved make list of DNHPDCL or as approved by Chief Technical Officer (CTO).

Roof Top Solar Plant- Design, shop drawing, fabrication, procurement, supply, installation, testing and commissioning of 200kW capacity Roof Top Solar Photovoltaic Power Plant tied with Grid complete with all accessories and materials such as Solar PV Module, Support Array/ Mounting Structure, Power Conditioning Unit/ Inverter, DC Combiner Box, DC Distribution Board, AC Distribution Board, Junction Boxes, Various sizes of Cables, Data Acquisition System, Cement Concrete Foundations, Surge protection, Earthing and Lightning System as requried for the completion of Job as specified in Technical Specification and as directed by Engineer in-charge. Refer the Technical Specification for more details. The makes of Solar Panel shall be like Tata, Adani or as per the appproved make list of DNHPDCL or as approved by Chief Technical Officer (CTO). However, the makes of Solar Equipments (Inverter, AC/DC DB box) shall be like ABB, Schneider, Eaton, Siemens, Toshiba or as per the approved make list of DNHPDCL or as approved by Chief Technical Officer (CTO).

Lightning Protection/ Arrestor System- Supply, Installation, Testing and Commissioning of Vertical Air Termination Solid aluminium with Base‐ 10 mm dia and 1000 mm long. Air Termination Base shall be tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561‐1 2017 protocol. The makes of Lightning Protection System shall be like OBO, JEF or as per the appproved make list of DNHPDCL or as approved by Chief Technical Officer (CTO).

Supply, Installation, Testing and Commissioning of 8 mm dia solid Aluminium Conductor for Down Conductor and tested as per IEC 62561‐ 2 conducted in the Govt. aggregated thirty party laboratory to meet the requirement of IS/ IEC 62305.

Supply, Installation, Testing and Commissioning of Al conductor holding clamp suitable for fixing 8 mm Down Conductor. Conductor holder @ 1 meter distance and should be tested as per IEC‐ 62561‐2 conditioning & Ageing test, conducted in the Govt. accredited thirty party laboratory to meet the requirement of IS/ IEC 62305.

Supply, Installation, Testing and Commissioning of Al. Straight Splicers for 8mm and 10 mm. Conductor to meet the requirement of IS IEC 62305 tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561‐1 2017 protocol.

Supply, Installation, Testing and Commissioning of Expansion Piece without connector to compensate the expansion and contraction of Solid Round Al. Conductor during temperature variations to be provided on conductors length over 20 meters to connect Solid Round Al. Conductor at both ends to meet the requirements of IS/IEC 62305.

Supply, Installation, Testing and Commissioning of Cross splicer and should be tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561‐1 2017 protocol.

Supply, Installation, Testing and Commissioning of Each down‐conductor should be provided with a test link in order to disconnect the earth termination system for enabling measurements. SS Test Link To connect Round to Flat conductor.

Supply, Installation, Testing and Commissioning of 25 X 6 mm GI strip from AL Conductor to the earth pit station and further the same strip shall be used for interconnecting all the earth pits below ground leve Zinc coating: 500 g/m square (Approx :70 micron coating) Should be tested and use exclusively for lightning protection ,earthing system and ring equipotential bonding.

Supply, Installation, Testing and Commissioning of Holder made of GI for fixing 25 x 6 mm GI Strip.

Supply, Installation, Testing and Commissioning of Earth Electrode made of Cu Bonded Steel Rod 14.2mm dia x 3000mm‐(250Microns) Eco Friendly, rust proof, heavy duty, weather proof, Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). 14.2 / OD SS Clamp Both Side Jef Carbon based backfill compound ‐ 25Kg.

Supply, Installation, Testing and Commissioning of Lightening Counter with IP65 Enclosure.

ICT WORKS SITC of 2.0 MP 1/2.8" Progressive Scan CMOS , Min. Illumination Color: 0.01 Lux @(F1.2, AGC ON), 0.028Lux @(F2.0, AGC ON); B/W: 0.001 Lux @(F1.2, AGC ON), 0.0028 Lux @(F2.0, AGC ON), 0 Lux with IR Shutter Speed 1/3 s to 1/100,000 s Slow Shutter Yes Auto-Iris No Day & Night IR Cut Filter Digital Noise Reduction 3D DNR WDR 120 dB 3-Axis Adjustment Pan: 0°to 355°, tilt: 0°to 70°, rotate: 0°to 355°, IR Range Up to 40 m Wavelength 850nm, Video Compression Main stream: H.265/H.264 Sub-stream: H.265/H.264/MJPEG, Third stream: H.265/H.264 H.264 Type Baseline Profile/Main Profile/High Profile, H.264+ Main stream supports, H.265 Type Main Profile, H.265+ Main stream supports Video Bit Rate 32 Kbps to 8 Mbps, Audio Compression (-S) G.711/G.722.1/G.726/MP2L2/PCM, Audio Bit Rate (-S) 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2), TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP™, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour

SITC of 4.0MP,  1/2.8" Progressive Scan CMOS,  1920 × 1080@30fps  2.8/4/6 mm fixed lens  Color: 0.01 Lux @(F1.2, AGC ON), 0.028Lux @(F2.0, AGC ON);  H.265+, H.265, H.264+, H.264  120 dB WDR, IR Range Up to 40 m Wavelength 850nm, Video Compression Main stream: H.265/H.264 Sub-stream: H.265/H.264/MJPEG, Third stream: H.265/H.264 H.264 Type Baseline Profile/Main Profile/High Profile, H.264+ Main stream supports, H.265 Type Main Profile, H.265+ Main stream supports Video Bit Rate 32 Kbps to 8 Mbps, Audio Compression (-S) G.711/G.722.1/G.726/MP2L2/PCM, Audio Bit Rate (-S) 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2), TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP™, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour, Behavior analyses, BLC/3D DNR/ROI/HLC,  Built-in micro SD/micro SDHC/micro SDXC, card slot, up to 128 GB, PoE: (802.3af, 36V-57V), 0.2 A to 0.1 A, max. 6.5W, 12 VDC, 0.4 A, max. 5W, Protection Level IP67, IK10,

SITC of 16 Channel NVR DS-7716NI-K4. As per above specification.

SITC of 6 TB Hard drive. MAKE: SEGATE

SITC of 4U rack with all required accessories.

SITC of 4 mtr. GI Pole with following specifications. 75mmdia including base plate with all fittings mounted on 150mm dia and 600mm deep RCC foundation. Approved coloured with weather proof coat. All required connections of cables.

SITC of 8 Port POE Switch. With following specifications; 8x10/100 mbps RJ-45 posrts. 2 RJ-45 gigabit ethernet uplink ports. 2SFP gigabit ehternet fibre optical uplink ports. Power upto 8 POE Cameras. Rack mount compatible. LED's to provide status feedback. 7.2 gbps switching capacity. IEEE 802.3AF/AT complaint + UL listed. CSMA/CD complaint. Half duplex/Full duplex. TENDA/TPLINK/NETGEAR

SITC of 32" display with following specifications. Screen Size 32 Inches Screen Resolution-1366 x 768 Pixels. Display Quality-HD Ready. LED Lighting Type-Backlit. USB 2.0, HDMI, Ethernet ports. 1 x PC Audio In (Mini Jack), 1 x RF In (Terrestrial/Cable Input), 1 x (Common Use for PC Audio in) DVI Audio In (Mini Jack). 2 Built-in Speakers, Down Firing + Full Range. Wide colour enhancer. Minimum 3 years of warranty. MAKE: Samsung

SITC of 55" display with following specifications. Screen Size 32 Inches Screen Resolution-1366 x 768 Pixels. Display Quality-HD Ready. LED Lighting Type-Backlit. USB 2.0, HDMI, Ethernet ports. 1 x PC Audio In (Mini Jack), 1 x RF In (Terrestrial/Cable Input), 1 x (Common Use for PC Audio in) DVI Audio In (Mini Jack). 2 Built-in Speakers, Down Firing + Full Range. Wide colour enhancer. Minimum 3 years of warranty. MAKE: Samsung

SITC of 24 Port Layer- 2 Switch with following specifications. 24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 shared Gigabit SFP slots Console port. Auto medium dependent interface (MDI) and MDI crossover (MDI-X). Auto negotiate/manual setting. RPS port for connecting to redundant power supply unit. Switching capacity up to 48 Gbps, nonblocking. Forwarding rate upto 35.7 mpps. Built-in web user interface for easy browser-based configuration (HTTP/HTTPS). MAKE: TENDA/TPLINK/NETGEAR

SITC of Camera Box ipv 66 DS-1280ZJ-XS

SITC of Network DB

SITC of IP65 Wifi Access point with following specifications. WiFi Standards IEEE 802.11 a/b/g/n/ac (Wave-2). WEP, WPA/WPA2-PSK, WPA/WPA2 Enterprise (TKIP/AES), Port Forwarding, DHCP Reservation, Roaming, Band Steering, ACL (Layer2), Rate Limit, WLAN Scheduling, DNS Filtering, Client Isolation, Hotspot, Captive Portal. Up to 16 per Access Point (8 per Radio) 4 x Internal Omni-Directional Antennas ETHERNET 3 x 10/100/1000 Base-T with One PoE In 802.3af/at) port USB 1 x USB 2.0 MAKE: Ubiquiti/CAMBIUM/QUANTUM

SITC of Wifi supported POE Switch with following specifications. As per WiFi Standards IEEE 802.11 a/b/g/n/ac (Wave-2). Rack mount compatible. LED's to provide status feedback. 7.2 gbps switching capacity. IEEE 802.3AF/AT complaint + UL listed. CSMA/CD complaint. Half duplex/Full duplex. 2SFP gigabit ehternet fibre optical uplink ports. MAKE: AECONNECT/NETGEAR/TP-LINK

SITC of Computer System including 17" monitor. CPU with 8GB RAM, 2TB HDD, Memory graphic card, DVD writer, minimum 6 nos. USB ports, 2 nos. ethernet ports, HDMI, VGA ports. Keyboard. Mouse. Make: Dell, Lenovo, Toshiba

SITC of 24 core armoured optical fibre cable. Make: BTL

SITC of Media Converter (Pair). MAKE: DBC/TPLINK/NETGEAR

SITC of Grandstream-4 Incoming Line SIP/IP Extension. MAKE: Grandstream/PANASONIC/MATRIX

SITC of Grandstream IP Phone. MAKE: Grandstream/PANASONOC/MATRIX

Installation & Configuration of the CCTV & Wifi system.

SITC of Boom Barrier system for basement parking entry and exit area with all accessories and following specifications. Boom Length (mt)- 6. Height of Boom from ground- 884-914 (Approx mm). Housing Dimensions (Approx mm)450 x 295 x 1007. Boom Dimension (mm)- 100 x 40. Controller Protecting Rating-IP54. Control Panel Power Supply (V) 230 A.C.50/60Hz. Motor Power Supply (V) 24 D.C. Power- 300W. Current Draw (A)- 1.5. Torque (Nm)-600. Opening Time (Sec)-3 to 6. Duty Cycle-Intensive use. Operating Temp. (°C) : -20 to +55. Bar with protective rubber profile to prevent injury in case of any contact. Circular boom section. Loop Detector. Traffic/flashing light. Including both manual and automatic operation. Optical beam sensor inclusive. Programmable for fast and low speed traffic. inclusive of electrica panel to accept signals for various controls and safety accessories.

HVAC WORKS Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 8.0 H.P. ( 6.66 TR)

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 14.0 H.P. ( 11.50 TR )-

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 16.0 H.P. ( 13.33 TR)- as per description 8.6.1

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 18.0 H.P. ( 15.0 TR)- as per description 8.6.1

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 22.0 H.P. ( 18.3 TR) (10HP+12HP)- as per description 8.6.1

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 26.0 H.P. ( 21.66 TR) (12HP+14HP)- as per description 8.6.1

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 28.0 H.P. ( 23.3 TR) (14HP+14HP)- as per description 8.6.1

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 32.0 H.P. ( 26.66 TR) (16HP+16HP)- as per description 8.6.1

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 34.0 H.P. ( 28.33 TR) (16HP+18HP)- as per description 8.6.1

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Out-door units 38.0 H.P. ( 31.66 TR) (12HP+12HP+14HP)- as per description 8.6.1

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. In-door units. Ceiling Mounted Four Way Cassette Type. III (a) 4.0TR

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. In-door units. Ceiling Mounted Four Way Cassette Type. III (a) 3.0 TR

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Hi-wall mounted type units- as per description 8.6.1. (a) 2.00 TR

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Hi-wall mounted type units- as per description 8.6.1. (a) 1.50 TR

Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll/Rotary compressors/ Digital scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities. Hi-wall mounted type units- as per description 8.6.1. (a) 1.00 TR

Providing and supplying Corded remote controllers

Providing and supplying cordless remote control

Supply and installation of Central Remote Controller suitable up to 54 H.P. system

Supply and installation of Copper Refrigerant distribution joints. (b) Refnet joint suitable up to 8 H.P. Indoor units-( 6.40 TR )

Supply and installation of Copper Refrigerant distribution joints. - Refnet distribution joint for 10 H.P. to 20 H.P.

Supply and installation of Copper Refrigerant distribution joints. -Refnet distribution joint for 21 H.P. to 38 H.P.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.(1) 1/4" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 3/8" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 1/2" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 5/8" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 3/4" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 7/8" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 1" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 1-1/8" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 1-3/8" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 1-1/2" O.D.

Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc 1-5/8"

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 1/4" O.D. -13mm thick

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 3/8" O.D. -13mm thick- as per description 8.6.6

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 1/2" O.D. -13mm thick

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 5/8" O.D. - 19mm thick

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 3/4" O.D.- 19mm thick

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 7/8" O.D.- 19mm thick

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 1" O.D. - 19mm thick

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 1-1/8" O.D. - 25mm thick

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 1-3/8" O.D.- 25mm thick

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 1-1/2" O.D.- 25mm thick

Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length. 1-5/8" O.D.- 25mm thick

Supply, installation, testing & commissioning of control and communication cabling between the indoor and outdoor units in the rigid PVC conduit. (a) 2 core x 1 sq.mm steel braided twisted shielded wire

Supply, installation, testing & commissioning of Rigid PVC drain pipe of 10 Kg/cm2. rating with 9 mm thk.nitrile rubber insulation. 40 mm dia.

Supply, installation, testing & commissioning of Rigid PVC drain pipe of 10 Kg/cm2. rating with 9 mm thk.nitrile rubber insulation.- 25 mm dia.

Supply, installation, testing & commissioning of Rigid PVC drain pipe of 10 Kg/cm2. rating with 9 mm thk.nitrile rubber insulation. 19 mm dia

Supplying colourless non inflammable refrigerant Gas R-407a-410A

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (B) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 10 Sq. Mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (D) 4 core 16 Sq. mm

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (a) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (b)40 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (c)63 Amp.

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.

Supply, Installation, Testing & commissioning of Tube Axial Fan Capacity of 17000CFM for Basement Ventilation with all required accessories and connections.

Supplying and erecting G.S.S. sheet metal complete with all accessories viz. anchor fastners, black painted, M.S. Angle / rod support, self adhesive 3mm thick rubber gasket galvanised hardware, double canvas connection with 6" Zip. ducting with various gauges mentioned as below to be used as per IS - 655. (A) 24 Gauge

Supplying and erecting G.S.S. sheet metal complete with all accessories viz. anchor fastners, black painted, M.S. Angle / rod support, self adhesive 3mm thick rubber gasket galvanised hardware, double canvas connection with 6" Zip. ducting with various gauges mentioned as below to be used as per IS - 655. (B) 22 Gauge

Supplying and erecting G.S.S. sheet metal complete with all accessories viz. anchor fastners, black painted, M.S. Angle / rod support, self adhesive 3mm thick rubber gasket galvanised hardware, double canvas connection with 6" Zip. ducting with various gauges mentioned as below to be used as per IS - 655. (C) 20 Gauge

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

Operation and Maintenance for 5 years- Operation and maintenance charges for 5 year with DLP for Civil/ Road /Landscape and Horticulture/ Plumbing/ Electrical/ HVAC works. Works-Operation and maintenance charges for 5year with replacement/repair of damaged spare parts, hard surfaces, signages, benches, cobblestones, road works and polycarbonate roofing material as per manufacturers recommendation up to 5 years. Maintenance of installation, temporary structures, painting of gates, buildings in third and fifth year. Maintenance of brick cladding, copings of compound wall along with entry gates to all premises, sanitary appliances like water closets, wash basins, health faucets etc. and other preventive and routine maintenance work etc. complete. Replacement / Repair of damaged electrical equipments like light fixtures, fans, lit up signages, ambient lighting fixtures, Flood lighting, Street lighting, post top lanterns, poles, distribution boards, Solar PV Panels and other electrical accessories and machineries installed under the project as required as per standard norms. The scope of work also includes Quarterly Checkup of Electrical System including preventive and routine maintenance of electrical equipments installed under Project and as stipulated in O & M requirements, Diesel Cost for running of DG Set works up to 5 years. Defect liabilility, maintainance and warrarnty for 5 years for HVAC & Fire fighting. If required item replacement at BOQ cost to be reimbursed on case by case basis with approval from CTO. First year- Defect Liability period

Second Year

Third Year

Fourth Year

Fifth Year

P.R. Patel and Co.

M/s R. N. Dobariya