CERTAIN REPAIR TO FLOORING, PLASTERING, JOINERY ETC AT CHOWKIBAL, NIYARI, TREHGAM, PANZGAM AND PATHAHIRI IN THE AOR OF AGE B/R-II UNDER GE 874 EWS.

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L for brick work with sub class ' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.

All as per Ser Item No 2 but except brick work complete all as specified and as directed

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished fair and even complete all as specified and directed.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even complete all as specified and directed.

M&L rendering 10 mm thick cement plaster in CM 1:3 on concrete surfaces finished even and smooth with out using extra cement on ceiling complete all as specified and directed.

M & L preparation of new plastered wall surfaces and clearcolle for priming to distempering and applying two coats of distemper oil emulsion, white or tinted, complete all as specified and directed.

M & L applying two coats of cement based paint on newly plastered or un plastered wall surface including preparation of surfaces over alkali resistant priming paint complete all as specified and directed

M & L preparation of new plastered ceiling surfaces and clearcolle for priming to distempering and applying two coats of distemper oil emulsion, white or tinted complete all as specified and directed.

M&L for brooming down old decorated surfaces of walls, plastered or un plastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and directed. Note:- If required putty will be measured and paid separately under respective item of BOQ

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying a uniform layer of 1mm thick wall care putty including preparation of surfaces by rubbing with appropriate size of sand paper and applying two coats of oil bound distemper (approved colour/shed) complete all as specified and directed.

M&L for brooming down old decorated surfaces of ceiling, plastered or un plastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and directed.

M&L for preparation of old treated surfaces of walls, plastered or un plastered and applying one coat of cement base paint of approved shade/tint complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths complete all as specified and directed.

M&L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces complete all as specified and directed.

M & L two coats of synthetic enamel paint over a priming coat with red oxide over new steel surface over 10 cm width or girth complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint on old steel surfaces of any description, over 10 cm width or girth including preparation of old steel surfaces complete all as specified and directed.

M & L for preparation of old decorated wall surfaces and finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

S & F 1mm average thick wall care putty on wall/ceiling surfaces complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based steel sheet 0.50mm thick, of any colour having tensile strength of 550 Mpa, profiled for ridge as in roof covering, fixed with self tapping screws complete all as specified and directed.

Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work complete all as specified and directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

M&L for 2nd class soft wood moulding as in cornices, picture rails and like, not exc. 6 sqcm in section, wrought, fixed with nails complete all as specified and directed.

M & L for 2nd class Clean sawn battens at 30 cm centre to centre of sectional area of 5 but not exc 15 sqcm complete all as specified and as directed

M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed in walls with Nails to timber frame work all, complete all as specified and directed

M&L 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed in ceiling with nails to timber frame work complete all as specified and directed

M&L for 12 mm thick, 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed.

M&L for 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminum snap grid frame work of same size as aluminum Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminum Tee as cross runner and aluminum angle of size 25x25x1.25mm at the perimeter including Gl 6mm adjustable suspender of required length of any description complete all as specified and directed. Note: The design and specification of the ceiling board to be approved by GE.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick Cement concrete 1:4:8 type B- 2, using 40mm graded stone aggregate as in Sub base complete all as specified and directed.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed.

M&L 80mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-40 Grade complete all as specified and directed.

M & L 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, complete all as specified and directed.

M&L chequred cement concrete tiles 20cm X 20cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed..

M & L for providing cement concrete (1:2:4), type B-1 (using 20 mm graded crushed stone aggregate) as in benching, bed plates, coping, kerbs and the like including necessary formwork and finishing all exposed surface of concrete, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S& F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed

S & F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirtings/dados etc including 15mm thick rendering in CM 1:4 complete all as specified and as directed.

S & F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

S & F double charged Vitrified Ceramic tiles (Dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

S & F Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillar, window cills, cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sqm each (without taking off shutter from frames) complete all as specified and as specified and as directed.

Taking down Chowkhats or frames exc. 1.5 sqm each but n exc 4.00 Sqm each (without taking off shutter from frames) complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 qm each complete all as specified and as specified and as directed.

S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed.

S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and directed.

S&F for 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed.

S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick, 2nd class soft wood, Glazed and Skeleton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator as specified in SSR Part-I, Section-8, clause 8.24 (b) complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick 9styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame with wood free EPS at site as per specification and drawing complete all as specified.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, over Powder Coating to (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S & F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S& F double action floor spring, hydraulically regulated, made up of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

M&L for 12 mm thick prelaminated particle board interior grade prelaminated both side with decorative choice lamination fixed with screw to timber frame work/aluminium frame work complete all as specified and directed.

S& F 100mm long mortice latch with two levers (vertical type), brass body complete all as specified and as directed.

M&L for 5.5 mm thick tinted glass fixed to aluminium frame including rubber bead complete all as specified and directed.

M & L for sheet glass 3.0mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed.

S & F galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

S&F for mild steel framed work as in door of angle or other section with gusset plate , rails , braces, etc complete drilled for fixing of steel sheeting or other covering. Door etc, to be prepared hanging or sliding with and including either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing including one shop coat of zinc chromate primer paint confirming to F-410W GDe-250 A complete all as specified and directed.

S & F 150mm aluminium handle, cast type, anodised complete all as specified and as directed

S & F 200mm aluminium, anodised, barrel tower bolts of extruded sections and fixed complete all as specified and as directed

Supply and fixing for ISI marked 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed.

S& F butt hinges ISI marked 100mm size, medium weight, colled rolled mild steel complete all as specified and as directed.

S&F for mild steel 150 mm ordinary rat tail rod pattern springs including rollers and roller plate etc complete all as specified.

S & F in repair Stainless steel curtain rod 25mm dia fixed with decorative brackets ,stop roller and glass at the end etc complete all as specified and directed.

S & F in repair 15mm thick PVC connection with PTMT nuts of length 600mm complete all as specified and as directed.

M&L for cutting chases, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting n. exc 10 cm girth complete all as specified and directed.

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and directed.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and directed.

M & L for 15mm Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed.

M & L for 20mm Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed.

S&F in repair bib taps long body 15mm dia Chromium Plated, fancy type screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair Angular Stop Cock with Wall Flange 15mm dia Chromium Plated, fancy type complete all as specified and directed.

S & F in repair for 15mm bore stop valves, fancy type chromium plated with long shank and cup (concealed) type complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair chromium plated shower rose 125 mm size with or without swivel joints any size including to fixing to steel pipe or union complete all as specified and directed.

S&F in repair vitreous China white wash hand basin with pedestal white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI bracket 2 Nos embedded in CM 1:4 type complete all as specified and directed.

S&F in repairs vitreous China squatting pan Orrisa pattern size 580 x 440mm white with "P" and "S" trap front or back inlet etc including connection to trap and to flushing pipe , anti syphonage pipe etc including provisioning of cement concrete complete all as specified and directed.

S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan with 'P' trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified and directed.

S&F in repair Vitreous China urinal, half stall type white (excluding flushing cistern, flush pipe) including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed complete all as specified and directed.

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F for in repair stainless steel sink with out drainage board made of stainless steel 1 mm thick sheet for kitchen with waste coupling waste pipe, washer and including all necessary item including fixing to brackets and connected union to pipe complete of overall size 495 x 420 mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified and directed.

S&F in repair Wall Mixer with Telephone Shower Arrangement, Connecting Legs & Wall Flanges but without Crutch & Telephone Shower complete all as specified and directed.

S&F in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses complete all as specified and directed.

S&F in repair CP SOAP DISH HOLDER including fixing with brass screws to wall complete all as specified and directed.

S&F in repair Single Piece WC with PP soft close seat cover, Hinges, Fixing Accessories and Accessories Set, Cistern fittings, Size: 370x690x680 mm including S trap-300mm complete all as specified and directed.

S&F in repair CP Towel ring round with all connected fittings complete all as specified and directed.

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook with all connected fittings complete all as specified and directed.

S&F in repair 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.

M & L for 1000 Litres rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 250 but not exc 500 litres complete all as specified and directed.

M & L for 500 Litres rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 500 but not exc 1000 Litres complete all as specified and directed.

S & F of for ISI Marked 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M & L for providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for 18/19mm thick Pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

Same as per srl item No 116 above but fixing only.

All as per srl item No 24 above in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and directed.

M&L for plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails complete all as specified and directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and directed.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M&L for 25mm thick PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finished even and rough to received the topping layer complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

Taking down shutters n, exc 1 Sqm each complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; partly glazed i.e. upper panel will be glass pane fitted externally in the clear space & lower panel will be plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification described in SSR 2004 Part II Item No 881 complete all as specified and directed.

S & F for factory made fully glazed PVC window/ventilator shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; complete all as specified and directed. Note:- Glass shall be measured and paid separately.

M & L for sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 in each pane, 5.5mm thick complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium (extruded section) complete all as specified and directed.

S&F harrison rails, stainless steel, with fixing brackets, stops, rollers etc., complete all as specified and directed.

M&L for precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate complete all as specified and directed.

S&F for 75mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 300 mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified and directed.

S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sqm in each pane complete all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

M&L for dismantling of existing pipes 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including complete all as specified and directed.

M&L for dismantling of existing pipes 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including complete all as specified and directed.

M/S AK CONSTRUCTION (BID ID -3451648)

M/S LONE CONSTRUCTION COMPANY (BID ID -3451660)

Bidder Name

POPULARHARDWARESTORE

M/S AK CONSTRUCTION

M/S LONE CONSTRUCTION COMPANY