CLEANING/PERIODICAL SERVICES TO OVERHEAD TANK AND UNDERGROUND SUMPS AND OTHER CONNECTED WORKS UNDER AGE (I) TALBEHAT

Amount

Material & labour for cleaning of RCC over Head reservoir of any stages & of any type by manually cleaning the internal walls mouth of inlet & outlet pipe with wire brushes including cleaning the wash out water pipe from top to bottom from inner side at taking out the sludge complete & deposited at a site not exceeding 60 mtr from site of work ,cleaning the OH tank inner wall outlet & inlet pipe washout pipe mouth with fresh water & washout and painted out side on the Tank with Word "Date of Cleaning --------------and "Tank Capacity-------------"complete all as directed by Engr-in-Charge

RCC OH Reservoir 75000 gallon cap

RCC OH Reservoir 50000 gallon cap

RCC OH Reservoir 30000 gallon cap

RCC OH Reservoir 150000 gallon cap

RCC OH Reservoir 100000 gallon cap

RCC OH Reservoir 10000 gallon cap

Material & labour for cleaning of RCC underground sump of any type and prevent Algae Growth by dewatering existing water complete by manually with bucket or by using pump set etc including cleaning the internal walls floor with wire brushes & other approved material without damaging the existing surface of wall including cleaning the mouth of washout pipe & taking out the complete sludge & depositing at a distance not exceeding 50 mtr from the site of work & cleaning the complete UG sump surface of walls with fresh water after taking out the complete sludge with entire satisfaction of EIC. in different zone and painted outside on the Tank with Word "Date of Cleaning-------------and Tank Capacity-------------" of the following cap.

RCC ground clear water reservoir sump 100000 gallon

RCC ground clear water reservoir sump 30000 gallon

Material and labour for cleaning of RCC sedimentation tank of any type by dewatering the exiting water complete by manually with buckets or by using pump set etc including cleaning the internal walls floor with wire brushes and other approved material without damage the exiting surface of walls including cleaning the mouth of wash out pipe and taking out the complete the sludge and depositing at a distance not exceeding 50 mtr from the site of work cleaning the complete UG sump surface of walls with fresh water after taking out the complete sludge and applying of internal walls with 2 coat of suitable hygiene paint using in food container & other hygiene purpose and painted outside on the Tank with Word "Date of cleaning --------------and "Tank capacity------------" . all as specified and directed by engineer-in-charge.

Material & labour for cleaning of PVC /RCC Tanks of any stages & and on top of OTM and MD accn of any type by manually cleaning the internal walls mouth of inlet & outlet pipe with wire brushes including cleaning the wash out water pipe from top to bottom from inner side at taking out the sludge, removal of all scale and dirt etc . complete & deposited at a site not exceeding 60 mtr from site of work ,cleaning the tank inner wall outlet & inlet pipe with fresh water & washout and painted outside on the Tank with Word "Date of Cleaning --------------and "Tank Capacity-------------" all as directed by Engr-in-Charge

PVC OH Tanks 5000 Ltr cap

PVC OH Tanks 2000 Ltr cap

PVC OH Tanks 1000 Ltr cap

PVC OH Tanks 500 Ltr cap

S&F in replacement of 20 mm Ball valves ( float valve) PTMT ,high pressure , with polythene float and fly-nut complete screwed for iron pipe Float Valve, cast iron body, one end flanged type with strainer operating with suction pipe, including nut bolt & washers for joints and jointing material complete all as specified and as directed by Engineer in Charge.

S&F in replacement of 25 mm Ball valves ( float valve) PTMT ,high pressure , with polythene float and fly-nut complete screwed for iron pipe Float Valve, cast iron body, one end flanged type with strainer operating with suction pipe, including nut bolt & washers for joints and jointing material complete all as specified and as directed by Engineer in Charge.

Cleaning of shallow well by removing water from well and cleaning of mud and sludge manually and dewatering pump set of well and white washing of exposed walls of well walls by applying two coat. Removing sludge /Muds etc depositing at a distance not exc. 50 mtr outside the well with proper surface dressing complete all as specified and directed by Engr-in-Charge.

Cleaning the surrounding area of Overhead/ underground RCC tanks area at different zones cutting removing of grass, shrubs, bushes around Overhead tanks and installations all as directed by Engr-in-Charge and removing from the campus complete all as specified and directed. Note :- The particular job to be operated through out the contract period to maintain the clealeness of the surrounding are of the installation by removing the shrubs/bushes and grass to the entire satisfaction of the Engr-in-Charge and the periodicity of this item shall be decided by Engineer-in-Charge.

Supply & fixing Stop Valves 50 mm cast copper alloy screwed down high pressure with butterfly handle screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge Make : Zoloto/Jindal/Shakti/Leader/Kirti

All as per above Sl No 9.00 but size 40 mm

All as per above Sl No 9.00 but size 25 mm

All as per above Sl No 9.00 but size 20 mm

Supply & fixing 50mm bore steel water tubing medium grade, galvanised including all necessary fittings and fixture (Tee, Elbow, Socket, union, tank nipple, clamp etc) ,connect with existing pipe line/tank, fixed to wall/ceiling or laid in floors, trench complete all as specified and directed by Engineer-in-charge Make : TATA/Jindal/swastic/Parkash.

All as per above item No 13 hereinbefore but fixing only 25mm bore.

Disconnecting isolating hand pump/jet pump/submersible pump of 2 HP and flushing/cleaning bore hole of dia 200 mm by air compressor machine including taking GI pipe of any size from bore hole by using chain pulley (Approx. 30 RM depth and thereafter flushing refixing and lowering of pipe and connecting jet pump/hand pump/submersible pump in the same position and testing complete all as specified and directed by engineer in charge.

Excavation in trenches in soft/disintegrated rock/hard dense soil etc n. exc 1.5 m wide and n.exc 1.5m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 Sqmr on plan and n.exc 1.5 mtr in depth and getting out complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm each layers complete all as specified and as directed.

Removal of excavated material & surplus spoil n. exc 50 m to a distance and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as directed.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

m/s bobby enterprises

M/S Kharya Associates

M/S M S Constructions